Concentration Fluctuations and Segmental Dynamics in Weakly Dynamic Asymmetric Blends in the Presence of Surface-Functionalized Multiwall Carbon Nanotubes

Nanoparticles influence miscibility in LCST polymer blends: from fundamental perspective to current applications

Polymer blending is an effective method that can be used to fabricate new versatile materials with enhanced properties. The blending of two polymers can result in either a miscible or an immiscible polymer blend system. This present review provides an in-depth summary of the miscibility of LCST polymer blend systems, an area that has garnered much attention in the past few years. The initial discourse of the present review mainly focuses on process-induced changes in the miscibility of polymer blend systems, and how the preparation of polymer blends affects their final properties. This review further highlights how nanoparticles induce miscibility and describes the various methods that can be implemented to avoid nanoparticle aggregation. The concepts and different state-of-the-art experimental methods which can be used to determine miscibility in polymer blends are also highlighted. Lastly, the importance of studying miscible polymer blends is extensively explored by looking at their importance in barrier materials, EMI shielding, corrosion protection, light-emitting diodes, gas separation, and lithium battery applications. The primary goal of this review is to cover the journey from the fundamental aspects of miscible polymer blends to their applications.

Constructing a Microcapacitor Network of Carbon Nanotubes in Polymer Blends via Crystallization-Induced Phase Separation Toward High Dielectric Constant and Low Loss

Tailoring the distribution of nanoparticles and further constructing effective microcapacitors in polymer blends are important issues for developing high-performance polymer dielectric nanocomposites. The common method to control the selective localization of nanoparticles in an immiscible polymer blend is relatively difficult and it easily results in the accumulation of nanoparticles in one component, which usually leads to a dramatic increase of the dielectric loss in the nanocomposites. In this work, a novel strategy based on step-by-step crystallization has been proposed to tailor the refined distribution and dispersion of carbon nanotubes (CNTs) in a melt-miscible blend poly(butylene succinate)/poly(vinylidene fluoride) (PBS/PVDF) through the crystallization-induced phase separation and the engineered interfacial affinity between CNTs and polymer components to acquire high dielectric constant and low dielectric loss. The results reveal that PBS is excluded along the growth front of PVDF spherulites and locates in the margin areas of PVDF spherulites during the step-by-step crystallization process. Moreover, because of the higher interfacial interaction between CNTs and PBS, CNTs are located in the PBS-rich domain, resulting in a high concentration of CNTs in the interspherulites of PVDF. Thus, the dielectric constants of the nanocomposites are greatly improved by nearly 5-24 times compared with the nanocomposites achieved by quick cooling and, simultaneously, the dielectric loss of the nanocomposites is still maintained at a low level. This work shows that the step-by-step crystallization method can be used to fabricate the nanocomposites with a synergistic increase in the dielectric performance due to the formation of a refined microcapacitor assembly. To the best of our knowledge, this is the first report to show that the dielectric constant of the nanocomposites can be greatly enhanced just through the crystallization-optimized distribution and dispersion of CNTs in immiscible polymer blends, and it possibly gives a new technical route for the fabrication of advanced dielectric composites.

Phase separation behavior of poly(methyl methacrylate)/poly(styrene-co-maleic anhydride) in the presence of hollow silica nanotubes

The phase separation behavior of poly(methyl methacrylate) (PMMA)/poly(styrene-co-maleic anhydride) (SMA) blends with and without one-dimensional hollow silica nanotubes (HSNTs) was investigated using time-resolved small-angle laser light scattering. During isothermal annealing over a range of 100 °C above the glass transition temperature, the Arrhenius equation is applicable to describe the temperature dependence of phase separation behavior at the early and late stages of spinodal decomposition (SD) for unfilled and filled PMMA/SMA systems. The mechanical barrier effect of HSNTs on the macromolecular chain diffusion of the blend matrix may retard the concentration fluctuation at the early stage and slow down the domain coarsening at the late stage of SD phase separation for the blend matrix to result in the decrease of apparent diffusion coefficient D app, the postponement of the relaxation time and the decline of temperature sensitivity for the phase separation rate.

Phase miscibility and dynamic heterogeneity in PMMA/SAN blends through solvent free reactive grafting of SAN on graphene oxide

The spatial distribution of nanoparticles in a particular host polymer matrix can be improved by using brush coated nanoparticles. In this work we have grafted styrene-acrylonitrile (SAN) onto the surface of graphene oxide (GO) and investigated as to how the demixing temperature, morphology and volume cooperativity of PMMA/SAN blends are influenced. Grafting of polymer chains on the surface of nanoparticles usually involves the use of large amounts of solvents, many which are detrimental to the environment besides involving cumbersome processes. SAN-g-GO was prepared by a robust solvent-free strategy wherein the cyano group in SAN was replaced by oxazoline groups during melt mixing in the presence of zinc acetate and ethanol amine. These newly created oxazoline groups reacted with the COOH group of GO under melt extrusion resulting in grafting of SAN on the surface of GO sheets. The effect of SAN-g-GO nanoparticles on the demixing, local segmental motions and morphology evolution for different annealing times was carefully investigated in a classical LCST system, PMMA/SAN blend, using melt rheology, modulated DSC and AFM, respectively. The changes in viscoelastic behavior in the vicinity of demixing are investigated systematically for the control, and blends with GO and SAN-g-GO. Various models were used to gain insight into the spinodal decomposition temperatures of the blends. Interestingly, the demixing temperature determined rheologically and the spinodal decomposition temperature increased significantly in the presence of polymer grafted nanoparticles in comparison to the control and blends with GO. The evolution of the morphology, interfacial driven coarsening as a function of temperature and the localization of nanoparticles were assessed using atomic force microscopy. The cooperatively re-arranging regions estimated from calorimetric measurements begin to suggest enhanced dynamic heterogeneity in the presence of GO and SAN-g-GO in the blends. Taken together, our study reveals that the solvent-free approach of grafting SAN onto GO delays demixing, suppresses coalescence and alters cooperative relaxation in PMMA/SAN blends.

Nanoparticle induced miscibility in LCST polymer blends: critically assessing the enthalpic and entropic effects

The use of polymer blends widened the possibility of creating materials with multilayered architectures.

Tailoring the interface of an immiscible polymer blend by a mutually miscible homopolymer grafted onto graphene oxide: outstanding mechanical properties

A unique strategy was adopted here to improve the compatibility between the components of an immiscible polymer blend and strengthen the interface.