Responsive Ionogel Surface with Renewable Antibiofouling Properties

Review of ionic liquid and ionogel-based biomaterials for advanced drug delivery

Ionic liquids (ILs) play a crucial role in the design of novel materials. The ionic nature of ILs provides numerous advantages in drug delivery, acting as a green solvent or active ingredient to enhance the solubility, permeability, and binding efficiency of drugs. They could also function as a structuring agent in the development of nano/micro particles for drug delivery, including micelles, vesicles, gels, emulsion, and more. This review summarize the ILs and IL-based gel structures with their advanced drug delivery applications. The first part of review focuses on the role of ILs in drug formulation and the applications of ILs in drug delivery. The second part of review offers a comprehensive overview of recent drug delivery applications of IL-based gel. It aims to offer new perspectives and attract more attention to open up new avenues in the biomedical applications of ILs and IL-based gels.

Advances and challenges in slippery covalently-attached liquid surfaces

Over the past decade, a new class of slippery, anti-adhesive surfaces known as slippery covalently-attached liquid surfaces (SCALS) has emerged, characterized by low values of contact angle hysteresis (CAH, less than 5°) with water and most solvents. Despite their nanoscale thickness (1 to 5 nm), SCALS exhibit behavior similar to lubricant-infused surfaces, including high droplet mobility and the ability to prevent icing, scaling, and fouling. To date, SCALS have primarily been obtained using grafted polydimethylsiloxane (PDMS), though there are also examples of polyethylene oxide (PEO), perfluorinated polyether (PFPE), and short-chain alkane SCALS. Importantly, the precise physico-chemical characteristics that enable ultra-low CAH are unknown, making rational design of these systems impossible. In this review, we conduct a quantitative and comparative analysis of reported values of CAH, molecular weight, grafting density, and layer thickness for a range of SCALS. We find that CAH does not scale monotonically with any reported parameter; instead, the CAH minimum is found at intermediate values. For PDMS, optimal behavior is observed at advancing contact angle of 106°, molecular weight between 2 and 10 kg mol^-1, and grafting density of around 0.5 nm^-2. CAH on SCALS is lowest for layers created from end-grafted chains and increases with the number of binding sites, and can generally be improved by increasing the chemical homogeneity of the surface through the capping of residual silanols. We review the existing literature on SCALS, including both synthetic and functional aspects of current preparative methods. The properties of reported SCALS are quantitatively analyzed, revealing trends in the existing data and highlighting areas for future experimental study.

Ionogels: recent advances in design, material properties and emerging biomedical applications

Ionic liquid (IL)-based gels (ionogels) have received considerable attention due to their unique advantages in ionic conductivity and their biphasic liquid-solid phase property. In ionogels, the negligibly volatile ionic liquid is retained in the interconnected 3D pore structure. On the basis of these physical features as well as the chemical properties of well-chosen ILs, there is emerging interest in the anti-bacterial and biocompatibility aspects. In this review, the recent achievements of ionogels for biomedical applications are summarized and discussed. Following a brief introduction of the various types of ILs and their key physicochemical and biological properties, the design strategies and fabrication methods of ionogels are presented by means of different confining networks. These sophisticated ionogels with diverse functions, aimed at biomedical applications, are further classified into several active domains, including wearable strain sensors, therapeutic delivery systems, wound healing and biochemical detections. Finally, the challenges and possible strategies for the design of future ionogels by integrating materials science with a biological interface are proposed.

Recent advances in bio-inspired ionic liquid-based interfacial materials from preparation to application

Natural creatures always display unique and charming functions, such as the adhesion of mussels and the lubrication of Nepenthes, to maintain their life activities. Bio-inspired interfacial materials infused with liquid, especially for ionic liquids (ILs), have been designed and prepared to meet the emerging and rising needs of human beings. In this review, we first summarize the recent development of bio-inspired IL-based interfacial materials (BILIMs), ranging from the synthesis strategy to the design principle. Then, we discuss the advanced applications of BILIMs from anti-adhesive aspects (e.g., anti-biofouling, anti-liquid fouling, and anti-solid fouling) to adhesive aspects (e.g., biological sensor, adhesive tape, and wound dressing). Finally, the current limitations and future prospects of BILIMs are provided to feed the actual needs.

Designing a MOF-based slippery lubricant-infused porous surface with dual functional anti-fouling strategy

Material that resists biofouling adhesion is needed in a complex marine environment, but few of them can combine ultra-low fouling and environmental friendliness. Slippery lubricant-infused porous surface (SLIPS) is such a material, but it lacks the contact-killing ability, which limits its stability and anti-fouling efficiency. Here, we report a metal organic framework (MOF-based) Slippery ionic liquid-infused surface with excellent antifouling performance via synergistic release and contact-killing defense strategy. The dense needle-like MIL-110 array, grown in situ on the aluminum surface, is conducive to the stable storage of quaternary ammonium salt (QAS) ionic liquid. Compared to the control group with mature biofilm formed on the surface, SLIPS showed non-fouling performance in a 10-day test and another 21-day test under more challenging conditions. The adsorption amount of lipopolysaccharide (LPS) on SLIPS was 50% lower than that on the aluminum sheet and the aluminum sheet with MIL-110 grown on the surface as the control groups within three hours. The relationship between bacterial adhesion and LPS adsorption indicated that the anti-adhesion performance of SLIPS was mediated by the weak adhesion and easy release property of its surface to extracellular fouling molecules. This study provides the possibility to systematically reveal the antifouling mechanism of SLIPS on bacterial adhesion.

In Situ Electric-Induced Switchable Transparency and Wettability on Laser-Ablated Bioinspired Paraffin-Impregnated Slippery Surfaces

Switchable wetting and optical properties on a surface is synergistically realized by mechanical or temperature stimulus. Unfortunately, in situ controllable wettability together with programmable transparency on 2D/3D surfaces is rarely explored. Herein, Joule-heat-responsive paraffin-impregnated slippery surface (JR-PISS) is reported by the incorporation of lubricant paraffin, superhydrophobic micropillar-arrayed elastomeric membrane, and embedded transparent silver nanowire thin-film heater. Owing to its good flexibility, in situ controllable locomotion for diverse liquids on planar/curved JR-PISS is unfolded by alternately applying/discharging low electric-trigger of 6 V. Simultaneously, optical visibility can be reversibly converted between opaque and transparent modes. The switching principle is that in the presence of Joule-heat, solid paraffin would be melt and swell within 20 s to enable a slippery surface for decreasing light scattering and frictional force derived from contact angle hysteresis (FCAH ). Once Joule-heat is discharged, undulating rough surface would reconfigure by cold-shrinkage of paraffin within 8 s to render light blockage and high FCAH . Upon its portable merit, in situ thermal management, programmable visibility, as well as steering functionalized droplets by electric-activated JR-PISSs are successfully deployed. Compared with previous Nepenthes-inspired slippery surfaces, the current JR-PISS is more competent for in situ harnessing optical and wetting properties on-demand.

Coatable and Resistance-Proof Ionic Liquid for Pathogen Eradication

Antibiotic-resistant bacteria infect close to 3 million people, and kill 35,000, each year in the United States. Ionic liquid (IL)-based antimicrobial agents have the potential to diversify our ever-diminishing antibiotic arsenal. Here, we describe an IL with potent submicromolar antimicrobial activity in vitro against clinically relevant Gram-negative and Gram-positive bacterial pathogens as well as anti-infective activity in a mouse model. The IL kills pathogenic bacteria such as Acinetobacter baumannii, Salmonella enterica, and Escherichia coli by disrupting their outer membrane and does not select for bacterial resistance. We show incorporation of our IL into surface coatings to generate a type of antibiofilm material. The IL-loaded ionogel surfaces demonstrate high-antimicrobial and antifouling activity by killing bacteria in both static and dynamic tests. Our IL-based antibiofilm surfaces are low-cost and easy to manufacture, can be formed on glass, latex, plastic, and metal surfaces, such as catheters and other medical devices where high local concentrations of antimicrobials are needed, and may have applications in other clinical and industrial settings.

Life and death of liquid-infused surfaces: a review on the choice, analysis and fate of the infused liquid layer

We review the rational choice, the analysis, the depletion and the properties imparted by the liquid layer in liquid-infused surfaces – a new class of low-adhesion surface.