In-situ Polymerization and Flame Retardant Mechanism of Bio-based Nitrogen and Phosphorus Macromolecular Flame Retardant in Plywood

One-pot complexation of phytic acid and polyethyleneimine on cellulosic microfibers towards insulative and flame-resistant foam

Flame resistance is required for the deployment of bio-based materials, especially those forming cellular structures that endow thermal insulation. This study proposes a one-pot strategy to prepare cellular lignocellulosic composites with excellent flame resistance. Lignocellulosic microfibers were used as the substrate onto which a flame-retardant complex consisting of P-containing phytic acid (PA) and N-containing polyethyleneimine (PEI) was formed. Following the prediction of ab initio molecular dynamics simulation, PA and PEI are integrated onto MF-CTMP following a single-step complexation assembly triggered by pH effects. The PA-PEI modified MF-CTMP can be readily transformed into a composite solid foam by dewatering a wet foam followed by oven drying. At the expense of a slightly reduced thermal insulation (thermal conductivity increase from 33.6 ± 0.6 to 40.0 ± 0.6 mW/(m·K)) the presence of PA-PEI complexes significantly improved the mechanical performance of the foam and uniquely endows it with flame resistance. Compared to unmodified MF-CTMP foams, the composite foams showed significant improvement in the Young's, specific compression, and flexural moduli (increased by 13.5, 5.5, and 7.3 folds, respectively), a high oxygen index (up to 40.8 %) and self-extinguishing effects. The results suggest the suitability of the introduced lignocellulosic foam as an alternative to traditional synthetic polymer-based counterparts as well as inorganic matter for insulation, particularly relevant to the building sector.

Preparation and thermostability of a Si/P/N synergistic flame retardant containing triazine ring structure for cotton fabrics

A new synergistic flame retardant named Bisiminopropyl trimethoxysilane-1,3,5-triazine-O-bicyclic pentaerythritol phosphate (BTPODE) was synthesized, which is a type of Si/P/N flame retardant. This was accomplished by grafting aminopropyl trimethoxysilane and bicyclic pentaerythritol phosphate onto a triazine ring structure, serving as an intermediate. The structure of BTPODE was determined using nuclear magnetic resonance (1H NMR, 13C NMR, and 31P NMR) and Fourier transform infrared spectroscopy (FT-IR). SEM was used to detect the surface morphology of cotton fabrics, which suggested that BTPODE had been resoundingly stick to cotton fabrics. The flame retardant properties of cotton fabrics were evaluated by measuring the limiting oxygen index (LOI) and conducting vertical flammability experiments. Cotton fabrics with a weight gain of 20.73 % achieved an LOI value of 32.5 %. Thermogravimetric (TG) experiments demonstrated the samples' good thermostability. Furthermore, under nitrogen conditions, the char residue of cotton fabric with a weight gain of 20.73 % was 36.85 %. The cone calorimetry test (CONE) showed a significant reduction in the TSP value, indicating a certain level of smoke suppression performance. Finally, based on the obtained experimental results, the fire-retardant mechanism principle of the flame retardant was deduced.