Preparation of Natural Rubber-graft- Poly(lactic acid) Used as a Compatibilizer for Poly(lactic acid)/NR Blends

A review on graft compatibilizer for thermoplastic elastomer blend

A biodegradable thermoplastic elastomer (TPE) blend is developed by blending poly (lactic acid) (PLA) and natural rubber (NR) or epoxidized natural rubber (ENR) and it is a sustainable substitution in recent years for synthetic polymers. PLA is high in mechanical strength and compostable, but it is highly stiff and brittle. The incorporation of NR or ENR to PLA increases the impact strength and toughness of PLA. However, the disparity in polarity between PLA and elastomer phase like NR and ENR results in TPE blend being incompatible. Hence, compatibilization is essential to improve its polarity and develop interactions. Compatibilizer that composed of two different polymer is known is graft compatibilizer with the aid of grafting agent. The graft compatibilizers are divided into two categories. The first type is made up of one polymer and grafting agent and, the other one is composed of two polymer groups and grafting agent. These two types of graft compatibilizer can be prepared via two different method such as direct melt blending and solution. Apart from this, the TPE blend is produced via the melt blending technique with mixing machines such as internal mixer and extruder. This article has reviewed the preparation of the graft compatibilizer and blending technique of TPE. Based on the findings, the graft compatibilizers has a significant role in improving miscibility and compatibility across blend composed of different phase.

Valorization of Sugarcane Straw for the Development of Sustainable Biopolymer-Based Composites

Sugarcane straw (SCS) is a common agro-industrial waste that is usually incinerated or discarded in fields after harvesting, increasing the importance of developing added-value applications for this residue. In this study, sustainable biocomposites were produced, and the effect of sugarcane straw as a filler/reinforcement of commercial biopolymers was evaluated. Biocomposites were prepared using polylactic acid (PLA), polyhydroxybutyrate (PHB), polyhydroxybutyrate-co-hydroxyvalerate (PHBV), or green polyethylene (Green-PE) with different fiber contents (20, 30, and 40 wt.%). Dry-blending followed by compression molding was used for the biocomposites preparation. The results showed that PLA, PHB, and PHBV biocomposites retained the same impact strength as the neat matrices, even with 40 wt.% of sugarcane straw. The flexural and tensile modulus of PLA, PHB, and PHBV biocomposites increased with 20% of SCS, whereas, in Green-PE biocomposites, these properties increased at all fiber contents. Since any compatibilizer was used, both the flexural and tensile strength decreased with the addition of SCS. However, even with the highest content of SCS, the tensile and flexural strength values were around 20 MPa, making these materials competitive for specific industrial applications.