Microsurgical arterovenous loops and biological templates: a novel in vivo chamber for tissue engineering

Increased angiogenesis by the rotational muscle flap is crucial for nerve regeneration

Background

The gold standard surgical treatment of nerve injury includes direct repair, nerve graft, and neurolysis. The underlying effects (either beneficial or detrimental) of angiogenesis during nerve regeneration by rotational muscle flap have not yet determined. We assess the neurological outcome and angiogenesis of nerve injury following a rotational muscle flap.

Methods

We retrospectively analyzed the outcome of the patients with severe radial nerve injury by neurolysis and rotational muscle flap; we also mimicked the clinical situation by nerve crush followed by rotational muscle flap in animals to assess associated angiogenesis factor expression.

Results

Twenty-three out of 25 (92%) cases of severe radial nerve injury underwent neurolysis assisted by muscle flap rotation and eventually reached their preinjury neurological outcome. In the animal study, both FITC–dextran and Dil infusion showed a remarkably increased vascular structure in the crushed nerve integrated by the muscle flap and abolished by Avastin injection. The rotational muscle flap significantly increased angiogenesis factor expression, and this was attenuated by Avastin injection. The increased angiogenesis factor expression paralleled the improvement seen in neurobehavioral and electrophysiological studies as well as the significant expression of nerve regeneration markers and the restoration of denervated muscle morphology.

Conclusion

Based on the clinical and animal data analysis, we conclude that muscle flap rotation provides a platform for angiogenesis in the acceleration of nerve regeneration. It appears that the muscle flap rotation augmented the nerve regeneration process which may be beneficial for nerve repair in clinical application.

Characterization and in ovo vascularization of a 3D-printed hydroxyapatite scaffold with different extracellular matrix coatings under perfusion culture

For the fabrication of appropriate bone tissue-engineered constructs several prerequisites should be fulfilled. They should offer long-term stability, allow proper cell attachment and proliferation and furthermore be osteoinductive and easy to be vascularized. Having these requirements as background, we fabricated a novel porous 3D-printed hydroxyapatite (HA) scaffold and treated it with oxygen plasma (OPT). MG-63 pre-osteoblast-seeded bone constructs allowed good cell attachment and proliferation, which was even better when cultivated in a perfusion flow bioreactor. Moreover, the deposition of extracellular matrix (ECM) on the otherwise inorganic surface changed the mechanical properties in a favourable manner: elasticity increased from 42.95±1.09 to 91.9±5.1 MPa (assessed by nanoindentation). Compared to static conditions, osteogenic differentiation was enhanced in the bioreactor, with upregulation of ALP, collagen I and osteocalcin gene expression. In parallel experiments, primary human bone marrow mesenchymal stromal cells (hBMSCs) were used and findings under dynamic conditions were similar; with a higher commitment towards osteoblasts compared to static conditions. In addition, angiogenic markers CD31, eNOS and VEGF were upregulated, especially when osteogenic medium was used rather than proliferative medium. To compare differently fabricated ECMs in terms of vascularization, decellularized constructs were tested in the chorioallantoic membrane (CAM) assay with subsequent assessment of the functional perfusion capacity by MRI in the living chick embryo. Here, vascularization induced by ECM from osteogenic medium led to a vessel distribution more homogenous throughout the construct, while ECM from proliferative medium enhanced vessel density at the interface and, to a lower extent, at the middle and top. We conclude that dynamic cultivation of a novel porous OPT HA scaffold with hBMSCs in osteogenic medium and subsequent decellularization provides a promising off-the-shelf bone tissue-engineered construct.

Collagen-Elastin and Collagen-Glycosaminoglycan Scaffolds Promote Distinct Patterns of Matrix Maturation and Axial Vascularization in Arteriovenous Loop-Based Soft Tissue Flaps

INTRODUCTION

Autologous free flaps are the criterion standard for reconstructions of complex soft tissue defects; however, they are limited by donor-site morbidities. The arteriovenous (AV) loop model enables the generation of soft tissue constructs based on acellular dermal matrices with a functional microvasculature and minimal donor site morbidity. The ideal scaffold for AV loop-based tissue engineering has not been determined.

METHODS

AV loops were placed into subcutaneous isolation chambers filled with either a collagen-elastin scaffold or a collagen-glycosaminoglycan scaffold in the thighs of rats. Matrix elasticity, neoangiogenesis, cell migration, and proliferation were compared after 14 and 28 days.

RESULTS

Mean vessel count and area had increased in both matrices at 28 compared with 14 days. Collagen-elastin matrices showed a higher mean vessel count and area compared with collagen-glycosaminoglycan matrices at 14 days. At 28 days, a more homogeneous vascular network and higher cell counts were observed in collagen-elastin matrices. Collagen-glycosaminoglycan matrices, however, exhibited less volume loss at day 28.

CONCLUSIONS

Collagen-based scaffolds are suitable for soft tissue engineering in conjunction with the AV loop technique. These scaffolds exhibit distinct patterns of angiogenesis, cell migration, and proliferation and may in the future serve as the basis of tissue-engineered free flaps as an individualized treatment concept for critical wounds.

Flow-Induced Axial Vascularization: The Arteriovenous Loop in Angiogenesis and Tissue Engineering

Fabrication of a viable vascular network providing oxygen supply is identified as one crucial limiting factor to generate more complex three-dimensional constructs. The arteriovenous loop model provides initial blood supply and has a high angioinductive potency, making it suitable for vascularization of larger, tissue-engineered constructs. Also because of its angiogenic capabilities the arteriovenous loop is recently also used as a model to evaluate angiogenesis in vivo. This review summarizes the history of the arteriovenous loop model in research and its technical and surgical aspects. Through modifications of the isolation chamber and its containing matrices, tissue generation can be enhanced. In addition, matrices can be used as release systems for local application of growth factors, such as vascular endothelial growth factor and basic fibroblast growth factor, to affect vascular network formation. A special focus in this review is set on the assessment of angiogenesis in the arteriovenous loop model. This model provides good conditions for assessment of angiogenesis with the initial cell-free environment of the isolation chamber, which is vascularized by the arteriovenous loop. Because of the angiogenic capabilities of the arteriovenous loop model, different attempts were performed to create functional tissue in the isolation chamber for potential clinical application. Arteriovenous loops in combination with autologous bone marrow aspirate were already used to reconstruct large bone defects in humans.

The Arteriovenous (AV) Loop in a Small Animal Model to Study Angiogenesis and Vascularized Tissue Engineering

A functional blood vessel network is a prerequisite for the survival and growth of almost all tissues and organs in the human body. Moreover, in pathological situations such as cancer, vascularization plays a leading role in disease progression. Consequently, there is a strong need for a standardized and well-characterized in vivo model in order to elucidate the mechanisms of neovascularization and develop different vascularization approaches for tissue engineering and regenerative medicine. We describe a microsurgical approach for a small animal model for induction of a vascular axis consisting of a vein and artery that are anastomosed to an arteriovenous (AV) loop. The AV loop is transferred to an enclosed implantation chamber to create an isolated microenvironment in vivo, which is connected to the living organism only by means of the vascular axis. Using 3D imaging (MRI, micro-CT) and immunohistology, the growing vasculature can be visualized over time. By implanting different cells, growth factors and matrices, their function in blood vessel network formation can be analyzed without any disturbing influences from the surroundings in a well controllable environment. In addition to angiogenesis and antiangiogenesis studies, the AV loop model is also perfectly suited for engineering vascularized tissues. After a certain prevascularization time, the generated tissues can be transplanted into the defect site and microsurgically connected to the local vessels, thereby ensuring immediate blood supply and integration of the engineered tissue. By varying the matrices, cells, growth factors and chamber architecture, it is possible to generate various tissues, which can then be tailored to the individual patient's needs.

AAV vector encoding human VEGF165-transduced pectineus muscular flaps increase the formation of new tissue through induction of angiogenesis in an in vivo chamber for tissue engineering: A technique to enhance tissue and vessels in microsurgically engineered tissue

In regenerative medicine, new approaches are required for the creation of tissue substitutes, and the interplay between different research areas, such as tissue engineering, microsurgery and gene therapy, is mandatory. In this article, we report a modification of a published model of tissue engineering, based on an arterio-venous loop enveloped in a cross-linked collagen–glycosaminoglycan template, which acts as an isolated chamber for angiogenesis and new tissue formation. In order to foster tissue formation within the chamber, which entails on the development of new vessels, we wondered whether we might combine tissue engineering with a gene therapy approach. Based on the well-described tropism of adeno-associated viral vectors for post-mitotic tissues, a muscular flap was harvested from the pectineus muscle, inserted into the chamber and transduced by either AAV vector encoding human VEGF₁₆₅ or AAV vector expressing the reporter gene β-galactosidase, as a control. Histological analysis of the specimens showed that muscle transduction by AAV vector encoding human VEGF₁₆₅ resulted in enhanced tissue formation, with a significant increase in the number of arterioles within the chamber in comparison with the previously published model. Pectineus muscular flap, transduced by adeno-associated viral vectors, acted as a source of the proangiogenic factor vascular endothelial growth factor, thus inducing a consistent enhancement of vessel growth into the newly formed tissue within the chamber. In conclusion, our present findings combine three different research fields such as microsurgery, tissue engineering and gene therapy, suggesting and showing the feasibility of a mixed approach for regenerative medicine.

Flow increase is decisive to initiate angiogenesis in veins exposed to altered hemodynamics

Exposing a vein to altered hemodynamics by creating an arteriovenous (AV) shunt evokes considerable vessel formation that may be of therapeutic potential. However, it is unclear whether the introduction of oscillatory flow and/or flow increase is decisive. To distinguish between these mechanical stimuli we grafted a femoral vein into the arterial flow pathway of the contralateral limb in rats creating an arterioarterial (AA) loop (n = 7). Alternatively, we connected the femoral artery and vein using the vein graft, whereby we created an AV-loop (n = 27). Vessel loops were embedded in a fibrin filled chamber and blood flow was measured by means of flow probes immediately after surgery (day 0) and 15 days after loop creation. On day 15, animals were sacrificed and angiogenesis was evaluated using μCT and histological analysis. Mean flow increased from 0.5 to 2.4 mL/min and was elevated throughout the cardiac cycle at day 0 in AV-loops whereas, as expected, it remained unchanged in AA-loops. Flow in AV-loops decreased with time, and was at day 15 not different from untreated femoral vessels or AA-loop grafts. Pulsatile flow oscillations were similar in AV-and AA-loops at day 0. The flow amplitude amounted to ~1.3 mL/min which was comparable to values in untreated arteries. Flow amplitude remained constant in AA-loops, whereas it decreased in AV-loops (day 15: 0.4 mL/min). A large number of newly formed vessels were present in AV-loops at day 15 arising from the grafted vein. In marked contrast, angiogenesis originating from the grafted vein was absent in AA-loops. We conclude that exposure to substantially increased flow is required to initiate angiogenesis in grafted veins, whereas selective enhancement of pulsatile flow is unable to do so. This suggests that indeed flow and most likely wall shear stress is decisive to initiate formation of vessels in this hemodynamically driven angiogenesis model.

PHDs inhibitor DMOG promotes the vascularization process in the AV loop by HIF-1a up-regulation and the preliminary discussion on its kinetics in rat

BACKGROUND

The Arterovenous Loop (AV Loop) model is a vascularization model in tissue engineering research, which is capable of generating a three dimensional in vivo unit with cells as well as the supporting vessels within an isolation chmaber. In our previous studies the AV loop in the isolation chamber was discovered to undergo hypoxia, characterized by Hypoxia Inducible Factor (HIF) up-regulation. The vascularization followed the increase of HIF-α temporally, while it was spatially positively correlated with the HIF-α level, as well. This study aims to prove that HIF-1a up-regulation is the stimulus for vascularization in the AV loop model.

METHOD

The AV loop model in rats was created by interposing a femoral vein graft into the distal ends of the contralateral femoral artery and vein, and the loop was embeded in fibrin matrix and fixed in isolation chamber. PHD (prolyl hydroxylases) inhibitor DMOG (Dimethyloxallyl Glycine) was applied systemically in the rats in 40 mg/KG at day 0 and day 3 (DMOG-1), or in 15 mg/KG at day 8, day10 and day12 (DMOG-2). Two weeks later the specimens were explanted and underwent morphological and molecular evaluations.

RESULTS

Compared to the control group, in the DMOG-2 group the HIF-1α positive rate was siginicantly raised as shown in immunohistochemistry staining, accompanied with a smaller cross section area and greater vessel density, and a HIF-1α accumulation in the kidney. The mRNA of HIF-1α and its angiogenic target gene all increased in different extends. Ki67 IHC demostrate more positive cells. There were no significant change in the DMOG-1 group.

CONCLUSION

By applying DMOG systemically, HIF-1α was up-regulated at the protein level and at the mRNA level, acompanied with angiogenic target gene up-regulateion, and the vascularization was promoted correspondingly. DMOG given at lower dosage constantly after one week tends to have better effect than the group given at larger dosage in the early stage in this model, and promotes cell proliferation, as evidenced by Ki67 IHC. Thus, this study proves that HIF-1a up-regulation is the stimulus for vascularization in the AV loop model and that the process of the vessel outgrowth can be controlled in the AV Loop model utilizing this mechanism.

Innervation of a prefabricated flap: a new experimental model

Introduction. Flap innervation by neoaxonogenesis is a promising field of investigation. The authors evaluated the possibility of innervating an acellular collagen scaffold as component of a potential prefabricated flap. Materials and Methods. Collagen matrix sheets were implanted around the femoral bundle of a murine model to produce two flaps on proximal and distal nerve stumps based on a flow-through model. After thirty days, nerve regeneration and integration into the collagen matrix were evaluated. The specimens were microscopically analyzed to study Schwann cell colonization and axonal integration with the matrix. Axonal count and density were assessed and statistically evaluated. Results. Qualitative structural and ultrastructural evaluation indicated integration, with axonal fibers merged within the collagen matrix, along with a newly formed vascular network on the proximal flap. Wallerian degeneration occurred inside the distal chamber. Axonal count and density did not show statistically significant differences between the nerve inside the proximal flap and the control side. Conclusions. Innervation of an acellular matrix can be obtained by direct nerve stump implantation. The flow-through system was relatively easy to build and reliable to provide adequate blood supply. The collagen scaffold may be a promising support or further studies of preinnervated microsurgical flaps.

Fabrication and in vivo microanastomosis of vascularized tissue-engineered constructs

Tissue engineering endeavors to create replacement tissues and restore function that may be lost through infection, trauma, and cancer. However, wide clinical application of engineered scaffolds has yet to come to fruition due to inadequate vascularization. Here, we fabricate hydrogel constructs using Pluronic(®) F127 as a sacrificial microfiber, creating microchannels within biocompatible, biodegradable type I collagen matrices. Microchannels were seeded with human umbilical vein endothelial cells (HUVEC) or HUVEC and human aortic smooth muscle cells (HASMC) in co-culture, generating constructs with an internal endothelialized microchannel. Histological analysis demonstrated HASMC/HUVEC-seeded constructs with a confluent lining after 7 days with preservation and further maturation of the lining after 14 days. Immunohistochemical staining demonstrated von Willebrand factor and CD31(+) endothelial cells along the luminal surface (neointima) and alpha-smooth muscle actin expressing smooth muscle cells in the subendothelial plane (neomedia). Additionally, the deposition of extracellular matrix (ECM) components, heparan sulfate and basal lamina collagen IV were detected after 14 days of culture. HUVEC-only- and HASMC/HUVEC-seeded microchannel-containing constructs were microsurgically anastomosed to rat femoral artery and vein and perfused, in vivo. Both HUVEC only and HUVEC/HAMSC-seeded constructs withstood physiologic perfusion pressures while their channels maintained their internal infrastructure. In conclusion, we have synthesized and performed microvascular anastomosis of tissue-engineered hydrogel constructs. This represents a significant advancement toward the generation of vascularized tissues and brings us closer to the fabrication of more complex tissues and solid organs for clinical application.

Myogenic differentiation of mesenchymal stem cells in a newly developed neurotised AV-loop model

Generation of axially vascularized muscle tissue constitutes a promising new approach to restoration of damaged muscle tissue. Mesenchymal stemcells (MSC), with their ability to be expanded to large cell numbers without losing their differentiation capacity into the myogenic lineage, could offer a promising cell source to generate neomuscle tissue. In vitro experiments showed that cocultures of primary myoblasts and MSC undergo myogenic differentiation by stimulation with bFGF and dexamethasone. A newly developed AV-Loop model with neurotization was established in this study. It encompasses axial vascularization and the additional implantation of a motor nerve serving as myogenic stimulator. Myoblasts and MSCs were coimplantated in a prevascularized isolation chamber. Cells were differentiated by addition of bFGF and dexamethasone plus implantation of a motor nerve. After 8 weeks, we could observe areas of myogenic differentiation with α-sarcomeric actin and MHC expression in the constructs. Quantitative PCR analysis showed an expression of myogenic markers in all specimens. Thus, neurotization and addition of bFGF and dexamethasone allow myogenic differentiation of MSC in an axially vascularized in vivo model for the first time. These findings are a new step towards clinical applicability of skeletal muscle tissue engineering and display its potential for regenerative medicine.

Tissue engineered bone grafts based on biomimetic nanocomposite PLGA/amorphous calcium phosphate scaffold and human adipose-derived stem cells

For tissue engineering of critical size bone grafts, nanocomposites are getting more and more attractive due to their controllable physical and biological properties. We report in vitro and in vivo behaviour of an electrospun nanocomposite based on poly-lactic-co-glycolic acid and amorphous calcium phosphate nanoparticles (PLGA/a-CaP) seeded with human adipose-derived stem cells (ASC) compared to PLGA. Major findings were that cell attachment, three-dimensional ingrowth and proliferation were very good on both materials. Cell morphology changed from a spindle-shaped fibroblast-like form to a more roundish type when ASC were seeded on PLGA, while they retained their morphology on PLGA/a-CaP. Moreover, we found ASC differentiation to a phenotype committed towards osteogenesis when a-CaP nanoparticles were suspended in normal culture medium without any osteogenic supplements, which renders a-CaP nanoparticles an interesting osteoinductive component for the synthesis of other nanocomposites than PLGA/a-CaP. Finally, electrospun PLGA/a-CaP scaffold architecture is suitable for a rapid and homogenous vascularisation confirmed by a complete penetration by avian vessels from the chick chorioallantoic membrane (CAM) within one week.

Axially vascularized bone substitutes: a systematic review of literature and presentation of a novel model

INTRODUCTION

The creation of axially vascularized bone substitutes (AVBS) has been successfully demonstrated in several animal models. One prototypical indication is bone replacement in patients with previously irradiated defect sites, such as in the mandibular region. The downside of current clinical practice, when free fibular or scapular grafts are used, is the creation of significant donor site morbidity.

METHODS

Based on our previous experiments, we extended the creation of an arterio-venous loop to generate vascularized bone substitutes to a new defect model in the goat mandibula. In this report, we review the literature regarding different models for axially vascularized bone substitutes and present a novel model demonstrating the feasibility of combining this model with synthetic porous scaffold materials and biological tissue adhesives to grow cells and tissue.

RESULTS

We were able to show the principal possibility to generate axially vascularized bony substitutes in vivo in goat mandibular defects harnessing the regenerative capacity of the living organism and completely avoiding donor site morbidity.

CONCLUSION

From our findings, we conclude that this novel model may well offer new perspectives for orthopedic and traumatic bone defects that might benefit from the reduction of donor site morbidity.

Overcoming hypoxia to improve tissue-engineering approaches to regenerative medicine

The current clinical successes of tissue engineering are limited primarily to low-metabolism, acellular, pre-vascularized or thin tissues. Mass transport has been identified as the primary culprit, limiting the delivery of nutrients (such as oxygen and glucose) and removal of wastes, from tissues deep within a cellular scaffold. While strategies to develop sufficient vasculature to overcome hypoxia in vitro are promising, inconsistencies between the in vitro and the in vivo environments may still negate the effectiveness of large-volume tissue-engineered scaffolds. While a common theme in tissue engineering is to maximize oxygen supply, studies suggest that moderate oxygenation of cellular scaffolds during in vitro conditioning is preferable to high oxygen levels. Aiming for moderate oxygen values to prevent hypoxia while still promoting angiogenesis may be obtained by tailoring in vitro culture conditions to the oxygen environment the scaffold will experience upon implantation. This review discusses the causes and effects of tissue-engineering hypoxia and the optimization of oxygenation for the minimization of in vivo hypoxia.

The impact of VEGF and bFGF on vascular stereomorphology in the context of angiogenic neo-arborisation after vascular induction

The aim of this in vivo study was to gather quantitative information on the three-dimensional morphology of a new vascular network under the influence of angioactive growth factors. For this purpose, the arteriovenous loop model was used in 10 Lewis rats to generate a bioartificial vascular assembly by means of vascular induction. In this model, an isolated organoid is created in the medial thigh of the animal by methods of tissue engineering. A fibrin gel containing vascular endothelial growth factor (VEGF(165)) and basic fibroblastic growth factor (bFGF) was used as a matrix in the effect group (GF+). Fibrin matrices devoid of growth factors were used as controls (GF-). A microvascular replica of the organoid was created by means of corrosion casting and the network was investigated on stereo-paired images obtained by scanning electron microscopy. Vectors of intercapillary and interbranching distances as well as the diameter of the pores in the intussusceptive events diameter and the ratio of sprouting versus intussusceptive angiogenic events were compared in the two groups. The results were highly significant. In the GF+ group there were more profound three-dimensional morphological traits of angiogenesis, whereas advanced neovascularisation in the phase of remodelling was demonstrated by a higher incidence of intussusception, compared to control. These results illustrate the importance of morphological studies with focus on the generation of three-dimensional vascular networks.

Clinical application of laser treatment for cardiovascular surgery

BACKGROUND

Recently, several kinds of lasers have been widely employed in the field of medicine and surgery. However, laser applications are very rare in the field of cardiovascular surgery throughout the world. So, we have experimentally tried to use lasers in the field of cardiovascular surgery. There were three categories: 1) Transmyocardial laser revascularization (TMLR), 2) Laser vascular anastomosis, and 3) Laser angioplasty in the peripheral arterial diseases. By the way, surgery for ischemic heart disease has been widely performed in Japan. Especially coronary artery bypass grafting (CABG) for these patients has been done as a popular surgical method. Among these patients there are a few cases for whom CABG and percutaneous coronary intervention (PCI) could not be carried out, because of diffuse stenosis and small caliber of coronary arteries. Materials and methods of TMLR: A new method of tranasmyocardial revascularization by CO2 laser (output 100 W, irradiation time 0.2 sec) was experimentally performed to save severely ill patients. In this study, a feasibility of transmyocardial laser revascularization from left ventricular cavity through artificially created channels by laser was precisely evaluated.

RESULTS

In trials on dogs laser holes 0.2mm in diameter have been shown microscopically to be patent even 3 years after their creation, thus this procedure could be used as a new method of transmyocardial laser revascularization. Clinical application of TMLR: Subsequently, transmyocardial laser revascularization was employed in a 55-year-old male patient with severe angina pectoris who had undergone pericardiectomy 7 years before. He was completely recovered from severe chest pain. Conclusions of TMLR: This patient was the first successful case in the world with TMLR alone. This method might be done for the patients who percutaneous coronary intervention and coronary artery bypass grafting could be carried out. Laser vascular anastomosis: At present time, in vascular surgery there are some problems to keep long-term patency after anastomosis of the conventional suture method, especially for small-caliber vessels. Materials and methods of Laser vascular anastomosis: From these standpoints, a low energy CO2 laser was employed experimentally in vascular anastomosis for small-caliber vessels. Resullts of Laser vascular anastomosis: From preliminary experiments it could be concluded that the optimal laser output was 20-40 mW and irradiation time was 6-12 sec/mm for vascular anastomosis of small-caliber vessels in the extremities. And then, histologic findings and intensity of the laser anastomotic sites were investigated thereafter. Subseqently, good enough intensity and good healing of laser anastomotic sites as well as the conventional suture method could be observed. There were no statistic differences between laser and suture methods. A feasibility of laser anastomosis could be considered and clinical application could be recognized. Clinical applications of Laser vascular anastomosis: On February 21, 1985, arterio-venous laser anastomosis for the patient with renal failure was smoothly done and she could accept hemodialysis. Conclusions of Laser vascular anastomosis: This patient was the first clinical successful case in the world. Thereafter, Laser vascular anastomosis were in 111 patients with intermittent claudication, refractory crural ulcer, and coronary disorders. Thereafter, they are going well. Laser angioplasty: Laser angioplasty for peripheral arterial diseases. There are many methods to treat peripheral arterial diseases such as balloon method, atherectomy, laser technique and stenting graft in the field of endovascular treatment. Recent years, minimal invasive treatment should be employed even in the surgical treatment. However, there are different images between these methods. Materials and methods of Laser angioplasty: We have chosen to use laser for endovascular treatment for peripheral arterial diseases. We have tried to check between laser energy and vessel wall. Results of Laser angioplasty: Subsequently, it could be concluded that optimal conditions for laser angioplasty were 6 W in output and irradiation time was 5 sec. And with another method of feedback control system, temperature of metal tip probe was 200°C and irradiation time was 5 sec for each shot. And histological study and feasibility of angioscopic guidance could be done and clinical application was started. Until now, 115 patients were successfully treated with their life longevity. Conclusions of Laser angioplasty: Thus, laser applications were useful methods to treat a lot of patients with some ischemic problems.

Vascularization strategies for tissue engineering

Tissue engineering is currently limited by the inability to adequately vascularize tissues in vitro or in vivo. Issues of nutrient perfusion and mass transport limitations, especially oxygen diffusion, restrict construct development to smaller than clinically relevant dimensions and limit the ability for in vivo integration. There is much interest in the field as researchers have undertaken a variety of approaches to vascularization, including material functionalization, scaffold design, microfabrication, bioreactor development, endothelial cell seeding, modular assembly, and in vivo systems. Efforts to model and measure oxygen diffusion and consumption within these engineered tissues have sought to quantitatively assess and improve these design strategies. This review assesses the current state of the field by outlining the prevailing approaches taken toward producing vascularized tissues and highlighting their strengths and weaknesses.