Technical Note: Enhancing soft tissue contrast and radiation-induced image changes with dual-energy CT for radiation therapy

Beyond Conventional CT: Role of Dual-Energy CT in Monitoring Response to Therapy in Abdominal Malignancies

In the era of precision medicine, imaging plays a critical role in evaluating treatment response to various oncologic therapies. For decades, conventional morphologic assessments using cross-sectional imaging have been the standard for monitoring the effectiveness of systemic and locoregional therapies in patients with cancer. However, the development of new functional imaging tools has widened the scope of imaging from mere response assessment to patient selection and outcome prediction. Dual-energy CT (DECT), known for its superior material differentiation capabilities, shows promise in enhancing treatment response evaluation. DECT-based iodine quantification methods are increasingly being investigated as surrogates for assessing tumor vascularity and physiology, which is particularly important in patients undergoing emerging targeted therapies. The purpose of this review article is to discuss the current and emerging role of DECT in assessing treatment response in patients with malignant abdominal tumors. Keywords: CT-Dual Energy, Transcatheter Tumor Therapy, Tumor Response, Iodine Uptake, Therapeutic Response © RSNA, 2025.

Progress in the application of dual-energy CT in pancreatic diseases

Pancreatic diseases are difficult to diagnose due to their insidious onset and complex pathophysiological developmental characteristics. In recent years, dual-energy computed tomography (DECT) imaging technology has rapidly advanced. DECT can quantitatively extract and analyze medical imaging features and establish a correlation between these features and clinical results. This feature enables the adoption of more modern and accurate clinical diagnosis and treatment strategies for patients with pancreatic diseases so as to achieve the goal of non-invasive, low-cost, and personalized treatment. The purpose of this review is to elaborate on the application of DECT for the diagnosis, biological characterization, and prediction of the survival of patients with pancreatic diseases (including pancreatitis, pancreatic cancer, pancreatic cystic tumor, pancreatic neuroendocrine tumor, and pancreatic injury) and to summarize its current limitations and future research prospects.

Monte Carlo model of a prototype flat-panel detector for multi-energy applications in radiotherapy

BACKGROUND

The incorporation of multi-energy capabilities into radiotherapy flat-panel detectors offers advantages including enhanced soft tissue visualization by reduction of signal from overlapping anatomy such as bone in 2D image projections; creation of virtual monoenergetic images for 3D contrast enhancement, metal artefact reduction and direct acquisition of relative electron density. A novel dual-layer on-board imager offering dual energy processing capabilities is being designed. As opposed to other dual-energy implementation techniques which require separate acquisition with two different x-ray spectra, the dual-layer detector design enables simultaneous acquisition of high and low energy images with a single exposure. A computational framework is required to optimize the design parameters and evaluate detector performance for specific clinical applications.

PURPOSE

In this study, we report on the development of a Monte Carlo (MC) model of the imager including model validation.

METHODS

The stack-up of the dual-layer imager (DLI) was implemented in GEANT4 Application for Tomographic Emission (GATE). The DLI model has an active area of 43×43 cm2 , with top and bottom Cesium Iodide (CsI) scintillators of 600 and 800 μm thickness, respectively. Measurement of spatial resolution and imaging of dedicated multi-material dual-energy (DE) phantoms were used to validate the model. The modulation transfer function (MTF) of the detector was calculated for a 120 kVp x-ray spectrum using a 0.5 mm thick tantalum edge rotated by 2.5o . For imaging validation, the DE phantom was imaged using a 140 kVp x-ray spectrum. For both validation simulations, corresponding measurements were done using an initial prototype of the imager. Agreement between simulations and measurement was assessed using normalized root mean square error (NRMSE) and 1D profile difference for the MTF and phantom images respectively. Further comparison between measurement and simulation was made using virtual monoenergetic images (VMIs) generated from basis material images derived using precomputed look-up tables.

RESULTS

The MTF of the bottom layer of the dual-layer model shows values decreasing more quickly with spatial frequency, compared to the top layer, due to the thicker bottom scintillator thickness and scatter from the top layer. A comparison with measurement shows NRMSE of 0.013 and 0.015 as well as identical MTF50 of 0.8 mm1 and 1.0 mm1 for the top and bottom layer respectively. For the DE imaging of the DE-phantom, although a maximum deviation of 3.3% is observed for the 10 mm aluminum and Teflon inserts at the top layer, the agreement for all other inserts is less than 2.2% of the measured value at both layers. Material decomposition of simulated scatter-free DE images gives an average accuracy in PMMA and aluminum composition of 4.9% and 10.3% for 11-30 mm PMMA and 1-10 mm aluminum objects respectively. A comparison of decomposed values using scatter containing measured and simulated DE images shows good agreement within statistical uncertainty.

CONCLUSION

Validation using both MTF and phantom imaging shows good agreement between simulation and measurements. With the present configuration of the digital prototype, the model can generate material decomposed images and virtual monoenergetic images.

Predicting Treatment Response From Extracellular Volume Fraction for Chemoradiation Therapy of Pancreatic Cancer

PURPOSE

Dual-energy computed tomography (DECT) data can be used to calculate the extracellular volume fraction (ECVf) in tumors, which has been correlated with treatment outcome. This study sought to find a correlation between ECVf and treatment response as measured by the change in cancer antigen (CA) 19 to 9 during chemoradiation therapy (CRT) for pancreatic cancer.

METHODS AND MATERIALS

Dual-energy CT data acquired during the late arterial contrast phase in the standard radiation therapy simulation on a dual-source DECT simulator for 25 patients with pancreatic cancer, along with their CA19-9 and hematocrit data, were analyzed. Each patient underwent preoperative CRT with a prescription of 50.4 Gy in 28 fractions. The patients were chosen based on the presence of a solid tumor in the pancreas that could be clearly delineated. A region of interest (ROI) was placed in the tumor and in the aorta. From the ratio of the iodine density calculated from the DECT in the ROI and the hematocrit taken at the time of simulation, the ECVf was calculated. The ECVf was then compared with the change in CA19-9 before and after the CRT. Distant metastases as the cause of CA19-9 elevation were ruled out on subsequent restaging images before surgery. The DECT-derived iodine ratio was validated using a phantom study.

RESULTS

The DECT-derived iodine concentration agreed with the phantom measurements (R², 1.0). The average hematocrit, ECVf, and change in CA19-9 during the treatment for the 25 patients was 35.6 ± 5.4%, 7.3 ± 4.9%, and -4.6 ± 21.8 respectively. A linear correlation was found between the ECVf and the change in CA19-9, with an R² of 0.7: ΔCA19-9 = 3.63 × ECVf - 31.1. The correlation was statistically significant (P = .006).

CONCLUSIONS

The calculated ECV fraction based on iodine maps from dual-source DECT may be used to predict treatment response after neoadjuvant chemoradiation therapy for pancreatic cancer.

Virtual monoenergetic images from dual-energy CT: systematic assessment of task-based image quality performance

Background

To compare task-based image quality (TB-IQ) among virtual monoenergetic images (VMI) and linear-blended images (LBI) from dual-energy CT as a function of contrast task, radiation dose, size, and lesion diameter.

Methods

A TB-IQ phantom (Mercury Phantom 4.0, Sun Nuclear Corporation) was imaged on a third-generation dual-source dual-energy CT with 100/Sn150 kVp at three volume CT dose levels (5, 10, 15 mGy). Three size sections (diameters 16, 26, 36 cm) with subsections for image noise and spatial resolution analysis were used. High-contrast tasks (e.g., calcium-containing stone and vascular lesion) were emulated using bone and iodine inserts. A low-contrast task (e.g., low-contrast lesion or hematoma) was emulated using a polystyrene insert. VMI at 40-190 keV and LBI were reconstructed. Noise power spectrum (NPS) determined the noise magnitude and texture. Spatial resolution was assessed using the task-transfer function (TTF) of the three inserts. The detectability index (d') served as TB-IQ metric.

Results

Noise magnitude increased with increasing phantom size, decreasing dose, and decreasing VMI-energy. Overall, noise magnitude was higher for VMI at 40-60 keV compared to LBI (range of noise increase, 3-124%). Blotchier noise texture was found for low and high VMIs (40-60 keV, 130-190 keV) compared to LBI. No difference in spatial resolution was observed for high contrast tasks. d' increased with increasing dose level or lesion diameter and decreasing size. For high-contrast tasks, d' was higher at 40-80 keV and lower at high VMIs. For the low-contrast task, d' was higher for VMI at 70-90 keV and lower at 40-60 keV.

Conclusions

Task-based image quality differed among VMI-energy and LBI dependent on the contrast task, dose level, phantom size, and lesion diameter. Image quality could be optimized by tailoring VMI-energy to the contrast task. Considering the clinical relevance of iodine, VMIs at 50-60 keV could be proposed as an alternative to LBI.

Therapeutic response assessment in pancreatic ductal adenocarcinoma: society of abdominal radiology review paper on the role of morphological and functional imaging techniques

Pancreatic ductal adenocarcinoma (PDA) is the third leading cause of cancer-related death in the United States and is projected to be the second by 2030. Systemic combination chemotherapy is considered an essential first-line treatment for the majority of patients with PDA, in both the neoadjuvant and palliative settings. In addition, a number of novel therapies are being tested in clinical trials for patients with advanced PDA. In all cases, accurate and timely assessment of treatment response is critical to guide therapy, reduce drug toxicities and cost from a failing therapy, and aid adaptive clinical trials. Conventional morphological imaging has significant limitations, especially in the context of determining primary tumor response and resectability following neoadjuvant therapies. In this article, we provide an overview of current therapy options for PDA, highlight several morphological imaging findings that may be helpful to reduce over-staging following neoadjuvant therapy, and discuss a number of emerging imaging, and non-imaging, tools that have shown promise in providing a more precise quantification of disease burden and treatment response in PDA.

Fast-switching dual energy cone beam computed tomography using the on-board imager of a commercial linear accelerator

To evaluate fast-kV switching (FS) dual energy (DE) cone beam computed tomography (CBCT) using the on-board imager (OBI) of a commercial linear accelerator to produce virtual monoenergetic (VM) and relative electron density (RED) images. Using an polynomial attenuation mapping model, CBCT phantom projections obtained at 80 and 140 kVp with FS imaging, were decomposed into equivalent thicknesses of aluminum (Al) and polymethyl methacrylate (PMMA). All projections were obtained with the titanium foil and bowtie filter in place. Basis material projections were then recombined to create VM images by using the linear attenuation coefficients at the specified energy for each material. Similarly, RED images were produced by replacing the linear attenuation values of Al and PMMA by their respective RED values in the projection space. VM and RED images were reconstructed using Feldkamp-Davis-Kress (FDK) and an iterative algorithm (iCBCT, Varian Medical Systems). Hounsfield units (HU), contrast-to-noise ratio (CNR) and RED values were compared against known values. The results after VM-CBCT production showed good material decomposition and consistent HU_VM values, with measured root mean square errors (RMSE) from theoretical values, after FDK reconstruction, of 20.5, 5.7, 12.8 and 21.7 HU for 50, 80, 100 and 150 keV, respectively. The largest CNR improvements, when compared to polychromatic images, were observed for the 50 keV VM images. Image noise was reduced up to 28% in the VM-CBCT images after iterative image reconstruction. RED values measured for our method resulted in a mean percentage error of 0.0%  ±  1.8%. This study describes a method to generate VM-CBCT and RED images using FS-DE scans obtained using the OBI of a linac, including the effects of the bowtie filter. The creation of VM and RED images increases the dynamic range of CBCT images, and provides additional data that may be used for adaptive radiotherapy, and on table verification for radiotherapy treatments.