Direct detection of alkylphosphonic acids in environmental matrices by proton coupled phosphorus NMR

Nontargeted Analysis of a Non-Aqueous-Phase Liquid From a Chemical Manufacturing Site Using Nuclear Magnetic Resonance Spectroscopy

Non-aqueous-phase liquids (NAPLs), composed primarily of organic solvents and other immiscible liquids, can be found in the subsurface at many industrial sites. The chemical composition of NAPLs is often complex and, in many instances, difficult to fully characterize using conventional analytical techniques based on targeted compound analysis. Incomplete characterization of NAPLs leaves gaps in the understanding of the chemical profile at an impacted site. Previous work has shown that nuclear magnetic resonance (NMR) spectroscopy may be able to assist in the improved characterization of complex NAPL samples. In general, NMR spectroscopy provides an unbiased approach for the analysis of organic compounds because different classes of compounds are all treated and analyzed using the same methods. In addition, NMR spectroscopy provides unique structural information that can be used to elucidate unknowns. The present study describes the use of NMR spectroscopy as a nontargeted tool to characterize the composition of NAPLs collected from an impacted site. It is shown that NMR spectroscopy can be a complementary tool to be used in site assessments to help provide improved understanding of NAPL chemistry, leading to the development of improved conceptual site models and improved strategies for remedial and managerial activities at impacted sites. Environ Toxicol Chem 2019;00:1-9. © 2019 SETAC.

Practical application of 1 H benchtop NMR spectroscopy for the characterization of a nonaqueous phase liquid from a contaminated environment

Nonaqueous phase liquids (NAPLs) located at the surface of the water table and/or below the water table are often a significant source for groundwater contamination near current or former commercial/industrial facilities. Due to the complex and long history of many industrial sites, these NAPLs often contain a complex mixture of contaminants and as such can be difficult to fully characterize using conventional analytical methods. Remediation and risk assessment activities at sites containing NAPLs may, subsequently, be hindered as the contamination profile may not be fully understood. This paper demonstrates the application of bench-scale 1 H nuclear magnetic resonance (NMR) spectroscopy as a practical tool to assist with the characterization of complex NAPLs. Here, a NAPL collected from a contaminated site situated near a former chemical manufacturing facility was analyzed using a combination of one-dimensional (1D) 1 H NMR spectroscopy and two-dimensional (2D) 1 H J-resolved spectroscopy (JRES). It is shown that 1D NMR experiments are useful in the rapid identification of the classes of compounds present, whereas 2D JRES NMR experiments are useful in identifying specific compounds. The use of benchtop NMR spectroscopy as a simple and cost effective tool to assist in the analysis of contaminated sites may help improve the practical characterization of many heavily contaminated sites and facilitate improved risk assessments and remedial strategies.

Self-Decontaminating Fibrous Materials Reactive toward Chemical Threats

Polymers that possess highly nucleophilic pyrrolidinopyridine (Pyr) and primary amino (vinylamine, VAm) groups were prepared by free-radical copolymerization of N,N-diallylpyridin-4-amine (DAAP) and N-vinylformamide (NVF) followed by acidic hydrolysis of NVF into VAm. The resulting poly(DAAP-co-VAm-co-NVF) copolymers were water-soluble and reacted with water-dispersible polyurethane possessing a high content of unreacted isocyanate groups. Spray-coating of the nylon-cotton (NYCO), rayon, and poly(p-phenylene terephthalamide) (Kevlar 119) fibers pretreated with phosphoric acid resulted in covalent bonding of the polyurethane with the hydroxyl groups on the fiber surface. A second spray-coating of aqueous solutions of poly(DAAP-co-VAm-co-NVF) on the polyurethane-coated fiber enabled formation of urea linkages between unreacted isocyanate groups of the polyurethane layer and the amino groups of poly(DAAP-co-VAm-co-NVF). Fibers with poly(DAAP-co-VAm-co-NVF) attached were compared with fibers modified by adsorption of water-insoluble poly(butadiene-co-pyrrolidinopyridine) (polyBPP) in terms of the stability against polymer leaching in aqueous washing applications. While the fibers modified by attachment of poly(DAAP-co-VAm-co-NVF) exhibited negligible polymer leaching, over 65% of adsorbed polyBPP detached and leached from the fibers within 7 days. Rayon fibers modified by poly(DAAP-co-VAm-co-NVF) were tested for sorption of dimethyl methylphosphonate (DMMP) in the presence of moisture using dynamic vapor sorption technique. Capability of the fibers modified with poly(DAAP-co-VAm-co-NVF) to facilitate hydrolysis of the sorbed DMMP in the presence of moisture was uncovered. The self-decontaminating property of the modified fibers against chemical threats was tested using a CWA simulant diisopropylfluorophosphate (DFP) in aqueous media at pH 8.7. Fibers modified with poly(DAAP-co-VAm-co-NVF) facilitated hydrolysis of DFP with the half-lives up to an order of magnitude shorter than that of the unmodified fibers. The presented polymers and method of multilayer coating can lead to a development of self-decontaminating textiles and other materials.