Magnetic resonance imaging using a ribbonator: hand and wrist

Exploration of highly accelerated magnetic resonance elastography using high-density array coils

BACKGROUND

Magnetic resonance elastography (MRE) measures tissue mechanical properties by applying a shear wave and capturing its propagation using magnetic resonance imaging (MRI). By using high density array coils, MRE images are acquired using single echo acquisition (SEA) and at high resolutions with significantly reduced scan times.

METHODS

Sixty-four channel uniplanar and 32×32 channel biplanar receive arrays are used to acquire MRE wave image sets from agar samples containing regions of varying stiffness. A mechanical actuator triggered by a stepped delay time introduces vibrations into the sample while a motion sensitizing gradient encodes micrometer displacements into the phase. SEA imaging is used to acquire each temporal offset in a single echo, while multiple echoes from the same array are employed for highly accelerated imaging at high resolutions. Additionally, stiffness variations as a function of temperature are studied by using a localized heat source above the sample. A custom insertable gradient coil is employed for phase compensation of SEA imaging with the biplanar array to allow imaging of multiple slices.

RESULTS

SEA MRE images show a mechanical shear wave propagating into and across agar samples. A set of 720 images was obtained in 720 echoes, plus a single reference scan for both harmonic and transient MRE. A set of 2,950 wave image frames was acquired from pairs of SEA images captured during heating, showing the change in mechanical wavelength with the change in agar properties. A set of 240 frames was acquired from two slices simultaneously using the biplanar array, with phase images processed into displacement maps. Combining the narrow sensitivity patterns and SNR advantage of the SEA array coil geometry allowed acquisition of a data set with a resolution of 156 µm × 125 µm × 1,000 µm in only 64 echoes, demonstrating high resolution and high acceleration factors.

CONCLUSIONS

MRE using high-density arrays offers the unique ability to acquire a single frame of a propagating mechanical vibration with each echo, which may be helpful in non-repeatable or destructive testing. Highly accelerated, high resolution MRE may be enabled by the use of large arrays of coils such as used for SEA, but at lower acceleration rates supporting the higher resolution than provided by SEA imaging.

A parallel imaging approach to wide-field MR microscopy

Magnetic resonance microscopy, suggested in the earliest papers on MRI, has always been limited by the low signal-to-noise ratio resulting from the small voxel size. Magnetic resonance microscopy has largely been enabled by the use of microcoils that provide the signal-to-noise ratio improvement required to overcome this limitation. Concomitant with the small coils is a small field-of-view, which limits the use of magnetic resonance microscopy as a histological tool or for imaging large regions in general. This article describes initial results in wide field-of-view magnetic resonance microscopy using a large array of narrow, parallel coils, which provides a signal-to-noise ratio enhancement as well as the ability to use parallel imaging techniques. Comparison images made between a volume coil and the proposed technique demonstrate reductions in imaging time of more than 100 with no loss in signal-to-noise ratio or resolution.

Variations on the slotted-tube resonator: rectangular and elliptical coils

Two designs (one rectangular, one elliptical) are proposed as efficient alternatives to noncylindrical birdcage RF coils. These designs are based on the slotted-tube resonator and their performance relies on the natural current distribution in the conductors due to the eddy current effects at high frequencies. A Finite element method program, solving the full set of Maxwell's equations, has been employed to accurately characterize and optimize the field homogeneity of the proposed noncylindrical coils. The optimum configuration of each design is presented, taking into account the effect of the RF shield. The proposed designs are compared to several configurations presented in the literature. Two coils (one rectangular, one elliptical) have been constructed and tested in a 0.6 T imaging system. A rectangular coil has been built to operate at 300 MHz. MR images substantiate the usefulness of these coils.

A solenoid-like coil producing transverse RF fields for MR imaging

A solenoidal RF coil is presented that generates an RF field only perpendicular to the long axis, so that it can be used longitudinally in the usual superconducting solenoid magnet for NMR. This new design is superior to the traditional saddle coil or Helmholtz pair. Applications for the coil will include imaging of legs, arms, etc., as well as analytical application in high-resolution NMR. A tilted single-turn-solenoid, which has the plane of each loop tilted with respect to the cylinder axis, is implemented to generate an RF field with a component perpendicular to the coil-cylinder axis. The novel addition of an eddy-current coil eliminates the undesirable longitudinal component of the RF field, leaving an RF field entirely perpendicular to the coil-cylinder axis. By inserting the eddy coil, the spatial homogeneity of the transverse RF field is greatly improved, with significant increases in the H1 field strength and receiving sensitivity. Images with the eddy-coil-modified tilted solenoid are remarkably uniform in intensity over a large useful volume.

Asymmetric single-turn solenoid for MRI of the wrist

A single-turn solenoid, lacking the conventional cylindrical or rectangular symmetry, was constructed for magnetic imaging of the human wrist at 1.5 Tesla. As is characteristic of single-turn solenoids, this wedge-shaped geometry solenoid was found to have a high filling factor and quality factor, as well as produce images with a favorable signal-to-noise ratio. The radio frequency (RF) transmitter power required to produce a 90 degrees pulse in the solenoid was 130 mW. The asymmetric solenoid had a small variation in the intensity of the RF field across its volume, which is characteristic of symmetrical single-turn solenoids. The combination of these four properties of the coil resulted in the production of excellent 1.5-mm thick anatomical images of the wrist.

MRI of hand and wrist with a dedicated low field mini imager: preliminary report

In this paper we describe the development and the early results of an MRI system designed specifically for imaging of the hand and wrist. The imager takes up little space, uses a small 0.1 Tesla water-cooled electro-magnet with a vertical magnetic field and a 15 cm air gap. The system is based on a PC micro-computer and an integrated image processing board. There is no need for a Faraday cage. The image resolution is less than 1 mm using a 128 x 128 matrix format for a typical slice thickness of 3 mm. It is possible to achieve a 0.2 mm per pixel spatial resolution when imaging the fingers.