Gold Nanowire Forests for SERS Detection

Chlamydia psittaci infected cell studies by 4Pi Raman and atomic force microscopy

Chlamydia psittaci is an avian bacterial pathogen that can cause atypical pneumonia in humans via zoonotic transmission. It is a Gram-negative intracellular bacterium that proliferates inside membrane bound inclusions in the cytoplasm of living eukaryotic cells. The study of such cells with C. psittaci inside without destroying them poses a significant challenge. We demonstrated in this work the utility of a combined multitool approach to analyze such complex samples. Atomic force microscopy was applied to obtain high-resolution images of the surface of infected cells upon entrance of bacteria. Atomic force microscopy scans revealed the morphological changes of the cell membrane of Chlamydia infected cells such as changes in roughness of cell membrane and the presence of micro vesicles. 4Pi Raman microscopy was used to image and probe the molecular composition of intracellular bacteria inside intact cells. Information about the structure of the inclusion produced by C. psittaci was obtained and it was found to have a similar molecular fingerprint as that of an intracellular lipid droplet but with less proteins and unsaturated lipids. The presented approach demonstrates complementarity of various microscopy-based approaches and might be useful for characterization of intracellular bacteria.

Nanosculptured tungsten oxide: High-efficiency SERS sensor for explosives tracing

The accurate and rapid identification of explosives and their toxic by-products is an important aspect of safety protocols, forensic investigations and pollution studies. Herein, surface-enhanced Raman scattering (SERS) is used to detect different explosive molecules using an improved substrate design by controllable oxidation of the tungsten surface and deposition of Au layers. The resulting furrow-like morphology formed at the intersection of the tungsten Wulff facets increases nanoroughness and improves the SERS response by over 300 % compared to the untreated surface. The substrate showed excellent reproducibility with a relative standard deviation of less than 15 % and a signal recovery of over 95 % after ultrafast Ar/O2 plasma cleanings. The detection limit for the "dried on a surface" measurement case was better than 10-8 M using the moving scanning regime and an acquisition time of 10 s, while for the "water droplets on a surface" scenario the LoD is 10-7, which is up to 2 orders of magnitude better than the UV-Vis spectroscopy method. The substrates were successfully used to classify the molecular fingerprints of HMX, Tetryl, TNB and TNT, demonstrating the efficiency of a sensor for label-free SERS screening in the practice of monitoring traces of explosives in the water medium.

Stable and Reusable Lace-like Black Silicon Nanostructures Coated with Nanometer-Thick Gold Films for SERS-Based Sensing

We propose a simple, fast, and low-cost method for producing Au-coated black Si-based SERS-active substrates with a proven enhancement factor of 10⁶. Room temperature reactive ion etching of silicon wafer followed by nanometer-thin gold sputtering allows the formation of a highly developed lace-type Si surface covered with homogeneously distributed gold islands. The mosaic structure of deposited gold allows the use of Au-uncovered Si domains for Raman peak intensity normalization. The fabricated SERS substrates have prominent uniformity (with less than 6% SERS signal variations over large areas, 100 × 100 μm²). It has been found that the storage of SERS-active substrates in an ambient environment reduces the SERS signal by less than 3% in 1 month and not more than 40% in 20 months. We showed that Au-coated black Si-based SERS-active substrates can be reused after oxygen plasma cleaning and developed relevant protocols for removing covalently bonded and electrostatically attached molecules. Experiments revealed that the Raman signal of 4-MBA molecules covalently bonded to the Au coating measured after the 10th cycle was just 4 times lower than that observed for the virgin substrate. A case study of the reusability of the black Si-based substrate was conducted for the subsequent detection of 10^-5 M doxorubicin, a widely used anticancer drug, after the reuse cycle. The obtained SERS spectra of doxorubicin were highly reproducible. We demonstrated that the fabricated substrate permits not only qualitative but also quantitative monitoring of analytes and is suitable for the determination of concentrations of doxorubicin in the range of 10^-9-10^-4 M. Reusable, stable, reliable, durable, low-cost Au-coated black Si-based SERS-active substrates are promising tools for routine laboratory research in different areas of science and healthcare.

Size controlled silver nanoparticles on β-cyclodextrin/graphitic carbon nitride: an excellent nanohybrid material for SERS and catalytic applications

A nanohybrid (NH), having high dispersion of silver nanoparticles (AgNPs) on β-cyclodextrin (β-CD)/graphitic carbon nitride (g-CN), designated as AgNPs/β-CD/g-CN-NH, was synthesized and characterized. It was exploited for a couple of environmental remediation applications like SERS sensing and catalytic reduction of specific organic pollutants in water. It showed excellent SERS activity as a Raman probe for the detection of malachite green (MG). Its enhancement factor (EF) and detection limit for MG were equal to 7.26 × 10⁶ and 1 × 10^-9 M, respectively. The relative standard deviation (RSD) was equal to 3.8% which indicates high homogeneity of AgNP dispersion and signal reproducibility of the SERS substrate. The NH displayed high catalytic activity for the reduction of eosin yellow (EY) in the presence of NaBH₄ with the rate constant (k) of 0.1142 min^-1. A comparison of the present NH with other reported materials reveals better SERS and catalytic activities of the former than those of the latter. The SERS activity of the NH was also examined for sensing of other triphenylamine dyes like methyl violet (MV), and it was successful. The same NH also exhibited high catalytic activity towards the reduction of Congo red (CR). The results of both studies clarify that the NH is an excellent SERS substrate and efficient catalyst for the detection of organic environmental pollutants having structures similar to MG and their degradation. This is due to the distribution of the controlled size of AgNPs on g-CN promoted by β-CD. Therefore, we focus our attention on future environmental applications of the nanohybrid as a very cheap SERS substrate and a very active catalyst.

Rapid fabrication of complex nanostructures using room-temperature ultrasonic nanoimprinting

Despite its advantages of scalable process and cost-effectiveness, nanoimprinting faces challenges with imprinting hard materials (e.g., crystalline metals) at low/room temperatures, and with fabricating complex nanostructures rapidly (e.g., heterojunctions of metal and oxide). Herein, we report a room temperature ultrasonic nanoimprinting technique (named nanojackhammer) to address these challenges. Nanojackhammer capitalizes on the concentration of ultrasonic energy flow at nanoscale to shape bulk materials into nanostructures. Working at room temperature, nanojackhammer allows rapid fabrication of complex multi-compositional nanostructures made of virtually all solid materials regardless of their ductility, hardness, reactivity and melting points. Atomistic simulations reveal a unique alternating dislocation generation and recovery mechanism that significantly reduces the imprinting force under ultrasonic cyclic loading. As a proof-of-concept, a metal-oxide-metal plasmonic nanostructure with built-in nanogap is rapidly fabricated and employed for biosensing. As a fast, scalable, and cost-effective nanotechnology, nanojackhammer will enable various unique applications of complex nanostructures in optoelectronics, biosensing, catalysis and beyond.

Contrastive Study of In Situ Sensing and Swabbing Detection Based on SERS-Active Gold Nanobush-PDMS Hybrid Film

Surface-enhanced Raman scattering (SERS) with fast and intuitive property has been extensively utilized in the field of food safety. Here, we demonstrated a novel noble metal-polymer hybrid film as a SERS substrate for food fungicide analysis. Benefiting from its transparency and flexibility, poly(dimethylsiloxane) (PDMS) film was chosen as a versatile supporting matrix to grow gold nanobushes (Au NBs) through a seed-mediated process. The as-prepared AuNB-PDMS hybrid film performed satisfactorily in testing 4-nitrothiophenol (4NTP) and exhibited an enhancement factor (EF) of 2.56 × 10⁶. Moreover, the high sensitivity and elastic properties make the hybrid film a promising substrate in practical detection. Hence, the in situ sensing of TBZ, carbaryl, and their mixture was finally realized using the developed hybrid film, which exhibited higher sensitivity than that obtained by the swabbing method. This high-performance SERS substrate based on the flexible and transparent AuNB-PDMS hybrid film has great potential applications in the fast in situ monitoring of biochemical molecules.

Synthesis of Multi-Au-Nanoparticle-Embedded Mesoporous Silica Microspheres as Self-Filtering and Reusable Substrates for SERS Detection

Surface-enhanced Raman-scattering-based (SERS-based) biosensing in biological fluids is constrained by nonspecific macromolecule adsorptions and disposable property of the SERS substrate. Here, novel multi-Au-nanoparticle-embedded mesoporous silica microspheres (AuNPs/mSiO₂) were prepared using a one-pot method, which served as reliable substrates for SERS enhancement associated with salient features of self-filtering ability and reusability. The fabrication and physical characterization of AuNPs/mSiO₂ microspheres were discussed, and SERS activity of this novel substrate was investigated by using 4-mercaptobenzoic acid (4-MBA) as Raman probe. The responses of our substrates to Raman intensities exhibited a SERS enhancement factor of 2.01 × 10⁷ and high reproducibility (relative standard deviation of 6.13%). Proof-of-concept experiments were designed to evaluate the self-filtering ability of the substrates in bovine serum albumin (BSA) and human serum solution, separately. The results clearly demonstrate that mesoporous SiO₂ can serve as a molecular sieve via size exclusion and avoid Raman signal interference of biomacromolecules in biological fluids. Subsequently, feasibility of practical application of AuNPs/mSiO₂ microspheres was assessed by quantitative detection of methotrexate (MTA) in serum. The method exhibited good linearity between 1 and 110 nM with the correlation coefficients of 0.996, which proved that the obtained AuNPs/mSiO₂ microspheres were good SERS substrates for determination of small biomolecules directly in biological fluids without need of manipulating samples. In addition, the substrate maintained its SERS response during multiple cycles, which was evaluated by recording Raman signals for 4-MBA before and after thermal annealing, thereby demonstrating the high thermostability and satisfactory reusability. These results offered the AuNPs/mSiO₂ microspheres attractive advantages in their SERS biosensing.

Defocused dark-field orientation imaging of single gold microrods on synthetic membranes

Defocused scattering patterns allowed us to resolve both in-plane and out-of-plane angles of single AuMRs.

High-Performance Real-Time SERS Detection with Recyclable Ag Nanorods@HfO2 Substrates

Ag nanorods coated with an ultrathin HfO₂ shell (Ag NRs@HfO₂) were prepared for the synthesis of a versatile, robust, and easily recyclable surface-enhanced Raman scattering (SERS) substrate. This substrate maximizes the high melting point of the HfO₂ shell and thus ensures the excellent plasmonic efficiency of Ag NRs. Therefore, it possesses extraordinary thermal stability and SERS activity, which could act as a reusable and cost-effective SERS detector. After SERS detection, the regeneration of Ag NRs@HfO₂ was achieved by annealing the substrate within several seconds. This procedure led to the thermal release of adsorbed molecules and resulted in a refreshed substrate for subsequent measurements. The composite substrate maintained its SERS efficiency well during multiple "detection-heating" cycles, hence demonstrating the stability and recyclability of Ag NRs@HfO₂. Furthermore, in addition to revealing the feasibility of SERS sensing in liquids, Ag NRs@HfO₂ also provided continuous real-time monitoring of vapor-phase samples at ultralow concentrations. This work provides a robust and renewable SERS sensor with advantages of high sensitivity, stability, cost effectiveness, and easy operation, which can be implemented for both aqueous and gaseous analyte detection and is thus an intriguing candidate for practical applications in environmental, industrial, and homeland security sensing fields.

Mechanism of the Transmetalation of Organosilanes to Gold

Density functional theory (DFT) calculations were carried out to study the reaction mechanism of the first transmetalation of organosilanes to gold as a cheap fluoride‐free process. The versatile gold(I) complex [Au(OH)(IPr)] permits very straightforward access to a series of aryl‐, vinyl‐, and alkylgold silanolates by reaction with the appropriate silane reagent. These silanolate compounds are key intermediates in a fluoride‐free process that results in the net transmetalation of organosilanes to gold, rather than the classic activation of silanes as silicates using external fluoride sources. However, here we propose that the gold silanolate is not the active species (as proposed during experimental studies) but is, in fact, a resting state during the transmetalation process, as a concerted step is preferred.

Directed Assembly of Ultrathin Gold Nanowires over Large Area by Dielectrophoresis

Ultrathin Au nanowires (∼2 nm diameter) are interesting from a fundamental point of view to study structure and electronic transport and also hold promise in the field of nanoelectronics, particularly for sensing applications. Device fabrication by direct growth on various substrates has been useful in demonstrating some of the potential applications. However, the realization of practical devices requires device fabrication strategies that are fast, inexpensive, and efficient. Herein, we demonstrate directed assembly of ultrathin Au nanowires over large areas across electrodes using ac dielectrophoresis with a mechanistic understanding of the process. On the basis of the voltage and frequency, the wires either align in between or across the contact pads. We exploit this assembly to produce an array of contacting wires for statistical estimation of electrical transport with important implications for future nanoelectronic/sensor applications.

Radial growth of plasmon coupled gold nanowires on colloidal templates

The library of plasmonic nanosystems keeps expanding with novel structures with the potential to provide new solutions to old problems in science and technology. We report the synthesis of a novel plasmonic system based on the growth of gold nanowires radially branching from the surface of silica particles. The nanowires length could be controlled by tuning the molar ratio between metal salt and surface-grafted seeds. Electron microscopy characterization revealed that the obtained one-dimensional nanoparticles are polycrystalline but uniformly distributed on the spherical template. The length of the nanowires in turn determines the optical response of the metallodielectric particles, so that longer wires display red-shifted longitudinal plasmon bands. Accurate theoretical modeling of these complex objects revealed that the densely organized nanowires display intrinsically coupled plasmon modes that can be selectively decoupled upon detachment of the nanowires from the surface of the colloidal silica template.

State of the art of nanoforest structures and their applications

Forest-like nanostructures, their syntheses, properties, and applications are reviewed.

SERS enhancement of silver nanoparticles prepared by a template-directed triazole ligand strategy

A one-pot method to prepare silver nanoparticle (AgNP) nanotags using the Tollens' reagent is described.