Engineering Na-Mo-O/Graphene Oxide Composites with Enhanced Electrochemical Performance for Lithium Ion Batteries

A Bio-Inspired Nanotubular Na2MoO4/TiO2 Composite as a High-Performance Anodic Material for Lithium-Ion Batteries

A train of bio-inspired nanotubular Na₂MoO₄/TiO₂ composites were synthesized by using a natural cellulose substance (e.g., commercial ordinary filter paper) as the structural template. The TiO₂ gel films were coated on the cellulose nanofiber surfaces via a sol-gel method firstly, followed with the deposition of the poly(diallyldimethylammonium chloride)/Na₂MoO₄ (PDDA/Na₂MoO₄) bi-layers several times, through the layer-by-layer self-assembly route, yielding the (PDDA/Na₂MoO₄)_n/TiO₂-gel/cellulose composite, which was calcined in air to give various Na₂MoO₄/TiO₂ nanocomposites containing different Na₂MoO₄ contents (15.4, 24.1, and 41.4%). The resultant nanocomposites all inherited the three-dimensionally porous network structure of the premier cellulose substance, which were formed by hierarchical TiO₂ nanotubes anchored with the Na₂MoO₄ layers. When employed as anodic materials for lithium-ion batteries, those Na₂MoO₄/TiO₂ nanocomposites exhibited promoted electrochemical performances in comparison with the Na₂MoO₄ powder and pure TiO₂ nanotubes, which was resulted from the high capacity of the Na₂MoO₄ component and the buffering effects of the TiO₂ nanotubes. Among all the nanotubular Na₂MoO₄/TiO₂ composites, the one with a Na₂MoO₄ content of 41.4% showed the best electrochemical properties, such as the cycling stability with a capacity of 180.22 mAh g⁻¹ after 200 charge/discharge cycles (current density: 100 mA g⁻¹) and the optimal rate capability.

Engineering Na-Mo-O/Graphene Oxide Composites with Enhanced Electrochemical Performance for Lithium Ion Batteries

Sodium molybdate (Na−Mo−O) wrapped by graphene oxide (GO) composites have been prepared via a simple in‐situ precipitation method at room temperature. The composites are mainly constructed with one dimension (1D) ultra‐long sodium molybdate nanorods, which are wrapped by the flexible GO. The introduction of GO is expected to not merely provide more active sites for lithium‐ions storage, but also improve the charge transfer rate of the electrode. The testing electrochemical performances corroborated the standpoint: The Na−Mo−O/GO composites delivers specific capacities of 718 mAh g⁻¹ after 100 cycles at 100 mA g⁻¹, and 570 mAh g⁻¹ after 500 cycles at a high rate of 500 mA g⁻¹; for comparison, the bare Na−Mo−O nanorod shows a severe capacity decay, which deliver only 332 mAh g⁻¹ after 100 cycles at 100 mA g⁻¹. In view of the cost‐efficient and less time‐consuming in synthesis, and one‐step preparation without further treatment, these Na−Mo−O nanorods/GO composites present potential and prospective anodes for LIBs.