Metal-Free B, N co-Doped Hierarchical Porous Carbon Electrocatalyst with an Excellent O2 Reduction Performance

pH-Regulated Refinement of Pore Size in Carbon Spheres for Size-Sieving of Gaseous C8 , C6 and C3 Hydrocarbon Pairs

Selective separation of industrial important C8 , C6 and C3 hydrocarbon pairs by physisorbents can greatly reduce the energy intensity related to the currently used cryogenic distillation techniques. The achievement of size-sieving based on carbonaceous materials is desirable, but commonly hindered by the random structure of carbons often with a broad pore size distribution. Herein, a pH-regulated pre-condensation strategy was introduced to control the carbon pore architecture by the sp2 /sp3 hybridization of precursor. The lower pH value during pre-condensation of glucose facilitates the growth of aromatic nanodomains, rearrangement of stacked layers and a concomitant transition from sp3 -C to sp2 -C. The subsequent pyrolysis endows the pore size manipulated from 6.8 to 4.8 Å and narrowly distributed over a range of 0.2 Å. The refined pores enable effective size-sieving of C8 , C6 and C3 hydrocarbon pairs with high separation factor of 1.9 and 4.9 for C8 xylene (X) isomers para-X/meta-X and para-X/ortho-X, respectively, 5.1 for C6 alkane isomers n-hexane/3-methylpentane, and 22.0 for C3 H6 /C3 H8 . The excellent separation performance based-on size exclusion effect is validated by static adsorption isotherms and dynamic breakthrough experiments. This synthesis strategy provides a means of exploring advanced carbonaceous materials with controlled hybridized structure and pore sizes for challenging separation needs.

Application of Thermal Response Measurements to Investigate Enhanced Water Adsorption Kinetics in Ball-Milled C2 N-Type Materials

Sorption-based water capture is an attractive solution to provide potable water in arid regions. Heteroatom-decorated microporous carbons with hydrophilic character are promising candidates for water adsorption at low humidity, but the strong affinity between the polar carbon pore walls and water molecules can hinder the water transport within the narrow pore system. To reduce the limitations of mass transfer, C2 N-type carbon materials obtained from the thermal condensation of a molecular hexaazatriphenylene-hexacarbonitrile (HAT-CN) precursor were treated mechanochemically via ball milling. Scanning electron microscopy as well as static light scattering reveal that large pristine C2 N-type particles were split up to a smaller size after ball milling, thus increasing the pore accessibility which consequently leads to faster occupation of the water vapor adsorption sites. The major aim of this work is to demonstrate the applicability of thermal response measurements to track these enhanced kinetics of water adsorption. The adsorption rate constant of a C2 N material condensed at 700 °C remarkably increased from 0.026 s-1 to 0.036 s-1 upon ball milling, while maintaining remarkably high water vapor capacity. This work confirms the advantages of small particle sizes in ultramicroporous materials on their vapor adsorption kinetics. It is demonstrated that thermal response measurements are a valuable and time-saving method to investigate water adsorption kinetics, capacities, and cycling stability.

Magnesium lignosulfonate-derived N, S co-doped 3D flower-like hierarchically porous carbon as an advanced metal-free electrocatalyst towards oxygen reduction reaction

The development of metal-free electrocatalytic materials that are economical, friendly to the environment, and efficiency towards the oxygen reduction reaction (ORR) is of significant interest. Hence, this paper synthesizes nitrogen and sulfur co-doped three-dimensional magnesium lignosulfonate (MLS-derived) flower-like hierarchical porous carbon (NSLPC) materials by a simple and green method. The synthesized NSLPC uses magnesium lignosulfonate as the sulfur source and carbon precursor, melamine as nitrogen source, MgO as hard template, and ZnCl₂ as the activator. We also investigated the effect of the ratio of MgO to ZnCl₂ on the catalyst performance. When the ratio of MgO to ZnCl₂ is 10:0.5, NSLPC-1005 possesses the highest ORR activity with an enormous surface area (1752.54 m² g^-1), abundant active sites, and a hierarchical porous network structure. In alkaline media, NSLPC-1005 has an initial potential of 0.97 V, as well as an excellent half-potential of 0.86 V (vs. Hg/HgO), and an ultimate current density of 5.35 mA cm^-2. It exhibits attractive ORR performance as well as outstanding cyclic stability that are comparable to commercial Pt/C electrocatalysts. This research developed an effective approach to synthesize metal-free carbon materials with high activity and long-term durability as electrocatalysts, which have a promising application in sustainable energy conversion technology.