The Catalytic Reduction of Nitroanilines Using Synthesized CuFe2 O4 Nanoparticles in an Aqueous Medium

Liquid phase selective oxidation of veratryl alcohol to veratraldehyde using pure and Mg-doped copper chromite catalysts

Mg-doped copper chromite (CuCr2O4) nanocomposites were synthesised through conventional technique. The pure and doped CuCr2-xMgx O4 (x = 0.00-0.1, 0.2 and 0.3%) nanocomposites were characterized in terms of their morphology, crystal structure, surface area and catalytic performance. The chemical composition of CuCr2-xMgx O4 was confirmed via FT-IR. The formation of pure and doped catalysts was validated by XRD results. TEM/SEM confirmed the formation of CuCr2-xMgxO4 nanoparticles. Mg-doped samples possess a high specific surface area compared to pure CuCr2O4. Thus, the effects of temperature, solvent, time, oxidant and the amount of catalyst on the oxidation of veratryl alcohol were reported. Furthermore, detailed mechanisms of the catalytic oxidation of veratryl alcohol as well as the reusability and stability of the nanomaterial were investigated. The resulting composites were shown to be effective heterogeneous catalysts for the oxidation of veratryl alcohol.

Preparation and characterization of hybrid polypyrrole nanoparticles as a conducting polymer with controllable size

Hybrid polypyrrole (PPy) nanoparticles were prepared using a low-temperature oxidative polymerization process in an acidic solution with polyethyleneimine (PEI) as a template and amine source. The results showed that the nanoparticles have an amorphous structure in the X-ray diffractogram and exhibited good dispersibility in water, uniform size, and a specific conductivity ranging from 0.1 to 6.9 S/cm. The particle size could be tuned from 85 to 300 nm by varying the reactant concentration. Undoping the samples with sodium hydroxide (NaOH) solution altered the optical absorption properties and surface roughness of the particles. However, it did not affect the particle size. The nanoparticles also exhibited optical sensing properties based on their UV-vis absorption changes with the pH. Moreover, nanoparticles could have potential applications in gene delivery and bio-adsorption for contaminant removal. This work demonstrates a simple and effective method for preparing hybrid polypyrrole nanoparticles with controllable size, dispersibility, and conductivity for various nanotechnology, biotechnology, and environmental engineering purposes.

SnAg2O3-Coated Adhesive Tape as a Recyclable Catalyst for Efficient Reduction of Methyl Orange

Silver oxide-doped tin oxide (SnAg2O3) nanoparticles were synthesized and different spectroscopic techniques were used to structurally identify SnAg2O3 nanoparticles. The reduction of 4-nitrophenol (4-NP), congo red (CR), methylene blue (MB), and methyl orange (MO) was studied using SnAg2O3 as a catalyst. Only 1.0 min was required to reduce 95% MO; thus, SnAg2O3 was found to be effective with a rate constant of 3.0412 min-1. Being a powder, SnAg2O3 is difficult to recover and recycle multiple times. For this reason, SnAg2O3 was coated on adhesive tape (AT) to make it recyclable for large-scale usage. SnAg2O3@AT catalyst was assessed toward MO reduction under various conditions. The amount of SnAg2O3@AT, NaBH4, and MO was optimized for best possible reduction conditions. The catalyst had a positive effect since it speed up the reduction of MO by adding more SnAg2O3@AT and NaBH4 as well as lowering the MO concentration. SnAg2O3@AT totally reduced MO (98%) in 3.0 min with a rate constant of 1.3669 min-1. These findings confirmed that SnAg2O3@AT is an effective and useful catalyst for MO reduction that can even be utilized on a large scale for industrial purposes.

Enhanced catalytic reduction of emerging contaminant by using magnetic CuFe2O4@MIL-100(Fe) in Fenton-based electrochemical processes

Fenton-based electrochemical processes (FEPs) using newly engineered 3D photocatalyst nanocomposites have garnered significant attention owing to their ability to remove emerging contaminants. Despite the development of numerous materials, there is still a need to enhance their efficiency, stability, and recyclability to address the limitations of FEPs. This study seeks to address this issue by investigating sustainable methods to engineer novel 3D core-shell photocatalyst composites for application in FEPs. These materials can update the photo-assisted PEFs activity, and magnetism can be helpful for the easy recyclability of the catalyst. Herein, we successfully synthesized a magnetic and photoactive CuFe₂O₄@MIL-100(Fe) (CM) composite through sustainable methods and assessed its morphological structure and physicochemical and photocatalytic properties. The catalytic performance of CM was investigated in an undivided RuO₂/air-diffusion cell to treat Cefadroxil. The results show that heterogeneous photoelectro-Fenton (HPEF) (100% in 120 min) has higher degradation efficiency than electro-Fenton (100% in 210 min) and electrooxidation (73.3% in 300 min) processes. The superior degradation efficiency of HPEF is attributed to the formation of a large amount of hydroxyl radicals indicating the excellent photocatalytic activity of the material due to the direct excitation of the Fe-O cluster, which boosts the redox reaction of Fe²⁺/Fe³⁺. Key operational parameters such as pH, catalyst concentration, current density, and CuFe₂O₄ proportion on MIL-100(Fe) in the composite were optimized in the HPEF process. The optimized composite exhibited good stability and easy recyclability, allowing high removal efficiency, which can be kept up after five cycles of 90 min. High degradation performance was observed using natural sunlight radiations. Additionally, possible catalytic degradation mechanisms in HPEFs were proposed based on radical quenching experiments. This study has significant potential to contribute to the development of more sustainable and effective water treatment strategies.

UV-shielding properties of a cost-effective hybrid PMMA-based thin film coatings using TiO2 and ZnO nanoparticles: a comprehensive evaluation

This study aimed to assess the UV-shielding features of the PMMA-based thin film coatings with the addition of TiO₂ and ZnO nanoparticles as nanofillers considering different contents. Furthermore, the effect of TiO₂/ZnO nanohybrids at different ratios and concentrations was examined. The XRD, FTIR, SEM, and EDX analyses characterized the prepared films' functional groups, structure, and morphology. Meanwhile, the coatings' optical properties and UV-protecting capability were investigated by ultraviolet-visible (UV-Vis) spectroscopy. The UV-Vis spectroscopic study revealed that as the concentration of nanoparticles increased in the hybrid-coated PMMA, the absorption in the UVA region increased. Overall, it can be concluded that the optimal coatings for PMMA were 0.1 wt% TiO₂, 0.1 wt% ZnO, and 0.025:0.025 wt% TiO₂: ZnO nanohybrid. Considering the acquired FT-IR of PMMA with different content of nanoparticles before and after exposure to the UV irradiation, for some films, it was confirmed that the polymer-based thin films degraded after 720 h, with either decreasing or increasing intensity of the degraded polymer, peak shifting, and band broadening. Notably, the FTIR results were in good agreement with UV-Vis outcomes. In addition, XRD diffraction peaks demonstrated that the pure PMMA matrix and PMMA coating films did not show any characteristic peaks indicating the presence of nanoparticles. All diffraction patterns were similar with and without any nanoparticles. Therefore, it depicted the amorphous nature of polymer thin film.

The catalytic performance of CuFe2O4@CQD nanocomposite as a high-perform heterogeneous nanocatalyst in nitroaniline group reduction

In this study, we fabricated an economical, non-toxic, and convenient magnetic nanocomposite of CuFe₂O₄ nanoparticles (NPs)/carbon quantum dots (CQDs) of citric acid via the co-precipitation method. Afterward, obtained magnetic nanocomposite was used as a nanocatalyst to reduce the ortho-nitroaniline (o-NA) and para-nitroaniline (p-NA) using a reducer agent of sodium borohydride (NaBH₄). To investigate the functional groups, crystallite, structure, morphology, and nanoparticle size of the prepared nanocomposite, FT-IR, XRD, TEM, BET, and SEM were employed. The catalytic performance of the nanocatalyst was experimentally evaluated based on the ultraviolet-visible absorbance to assess the reduction of o-NA and p-NA. The acquired outcomes illustrated that the prepared heterogeneous catalyst significantly enhanced the reduction of o-NA and p-NA substrates. The analysis of the absorption showed a remarkable decrease for ortho-NA and para-NA at λ_max = 415 nm in 27 s and λ_max = 380 nm in 8 s, respectively. The constant rate (k_app) of ortho-NA and para-NA at the stated λ_max was 8.39 × 10^-2 s^-1 and 5.48 × 10^-1 s^-1. The most highlighted result of this work was that the CuFe₂O₄@CQD nanocomposite fabricated from citric acid performed better than absolute CuFe₂O₄ NPs, since nanocomposite containing CQDs had a more significant impact than copper ferrite NPs.