The fibrotic phenotype of systemic sclerosis fibroblasts varies with disease duration and severity of skin involvement: reconstitution of skin fibrosis development using a tissue engineering approach

Successful long-term systemic sclerosis treatment by high-frequent low-dose B cell-depleting therapy

OBJECTIVES

Systemic sclerosis (SSc) is a multiorgan disease with a 10-year mortality rate of up to 50 %. B cell-depleting therapy with rituximab (RTX) appears effective in SSc treatment, but data from randomized controlled trials (RCTs) are lacking, and the frequency and dosage of RTX in SSc have no consensus. We aimed to evaluate the long-term efficacy and safety of quarterly RTX administration in SSc.

METHODS

This study retrospectively analyzed 40 patients with SSC treated with RTX twice within 14 days every 3 months from 2010 to 2020. The patients fulfilled the LeRoy and the American College of Rheumatology/European League Against Rheumatism Criteria for SSc. Modified Rodnan skin score (mRSS), lung function test results, and serum immunoglobulin (IgG, IgA, and IgM) concentrations were analyzed.

RESULTS

A total of 40 patients with SSc received RTX over a median time of 3.9 years (range: 1-10 years). The median mRSS (baseline: 19, 24 months: 16, p < 0.001) demonstrated a significant improvement, and the predicted forced vital capacity was stable. No new or unexpected safety signals, especially regarding treatment-related infectious adverse events, were observed. Immunoglobulin concentrations were within normal range, and specific antibodies to pneumococcal polysaccharides were preserved despite long-term B cell-depleting therapy. None of the patients died during the observation period of up to 10 years.

CONCLUSION

SSc was effectively and safely treated with low-dose RTX quarterly. RCTs are warranted to validate the advantage of continuous B cell depletion by quarterly low-dose RTX administration compared to other treatment intervals.

Machine learning-based approach for automated classification of cell and extracellular matrix using nanomechanical properties

Fibrosis characterized by excess accumulation of extracellular matrix (ECM) due to complex cell-ECM interactions plays a pivotal role in pathogenesis. Herein, we employ the pancreatic ductal adenocarcinoma (PDAC) model to investigate dynamic alterations in nanomechanical attributes arising from the cell-ECM interactions to study the fibrosis paradigm. Several segregated studies performed on cellular and ECM components fail to recapitulate their complex collaboration. We utilized collagen and fibronectin, the two most abundant PDAC ECM components, and studied their nanomechanical attributes. We demonstrate alteration in morphology and nanomechanical attributes of collagen with varying thicknesses of collagen gel. Furthermore, by mixing collagen and fibronectin in various stoichiometry, their nanomechanical attributes were observed to vary. To demonstrate the dynamicity and complexity of cell-ECM, we utilized Panc-1 and AsPC-1 cells with or without collagen. We observed that Panc-1 and AsPC-1 cells interact differently with collagen and vice versa, evident from their alteration in nanomechanical properties. Further, using nanomechanics data, we demonstrate that ML-based techniques were able to classify between ECM as well as cell, and cell subtypes in the presence/absence of collagen with higher accuracy. This work demonstrates a promising avenue to explore other ECM components facilitating deeper insights into tumor microenvironment and fibrosis paradigm.

Tissue Engineering for Gastrointestinal and Genitourinary Tracts

The gastrointestinal and genitourinary tracts share several similarities. Primarily, these tissues are composed of hollow structures lined by an epithelium through which materials need to flow with the help of peristalsis brought by muscle contraction. In the case of the gastrointestinal tract, solid or liquid food must circulate to be digested and absorbed and the waste products eliminated. In the case of the urinary tract, the urine produced by the kidneys must flow to the bladder, where it is stored until its elimination from the body. Finally, in the case of the vagina, it must allow the evacuation of blood during menstruation, accommodate the male sexual organ during coitus, and is the natural way to birth a child. The present review describes the anatomy, pathologies, and treatments of such organs, emphasizing tissue engineering strategies.

Heat-Inactivation of Fetal and Newborn Sera Did Not Impair the Expansion and Scaffold Engineering Potentials of Fibroblasts

Heat inactivation of bovine sera is routinely performed in cell culture laboratories. Nevertheless, it remains debatable whether it is still necessary due to the improvement of the production process of bovine sera. Do the benefits balance the loss of many proteins, such as hormones and growth factors, that are very useful for cell culture? This is even truer in the case of tissue engineering, the processes of which is often very demanding. This balance is examined here, from nine populations of fibroblasts originating from three different organs, by comparing the capacity of adhesion and proliferation of cells, their metabolism, and the capacity to produce the stroma; their histological appearance, thickness, and mechanical properties were also evaluated. Overall, serum inactivation does not appear to provide a significant benefit.

Genitourinary Tissue Engineering: Reconstruction and Research Models

Tissue engineering is an emerging field of research that initially aimed to produce 3D tissues to bypass the lack of adequate tissues for the repair or replacement of deficient organs. The basis of tissue engineering protocols is to create scaffolds, which can have a synthetic or natural origin, seeded or not with cells. At the same time, more and more studies have indicated the low clinic translation rate of research realised using standard cell culture conditions, i.e., cells on plastic surfaces or using animal models that are too different from humans. New models are needed to mimic the 3D organisation of tissue and the cells themselves and the interaction between cells and the extracellular matrix. In this regard, urology and gynaecology fields are of particular interest. The urethra and vagina can be sites suffering from many pathologies without currently adequate treatment options. Due to the specific organisation of the human urethral/bladder and vaginal epithelium, current research models remain poorly representative. In this review, the anatomy, the current pathologies, and the treatments will be described before focusing on producing tissues and research models using tissue engineering. An emphasis is made on the self-assembly approach, which allows tissue production without the need for biomaterials.

It is time to crowd your cell culture media - Physicochemical considerations with biological consequences

In vivo, the interior and exterior of cells is populated by various macromolecules that create an extremely crowded milieu. Yet again, in vitro eukaryotic cell culture is conducted in dilute culture media that hardly imitate the native tissue density. Herein, the concept of macromolecular crowding is discussed in both intracellular and extracellular context. Particular emphasis is given on how the physicochemical properties of the crowding molecules govern and determine kinetics, equilibria and mechanism of action of biochemical and biological reactions, processes and functions. It is evidenced that we are still at the beginning of appreciating, let alone effectively implementing, the potential of macromolecular crowding in permanently differentiated and stem cell culture systems.

Engineering Advanced In Vitro Models of Systemic Sclerosis for Drug Discovery and Development

Systemic sclerosis (SSc) is a complex multisystem disease with the highest case-specific mortality among all autoimmune rheumatic diseases, yet without any available curative therapy. Therefore, the development of novel therapeutic antifibrotic strategies that effectively decrease skin and organ fibrosis is needed. Existing animal models are cost-intensive, laborious and do not recapitulate the full spectrum of the disease and thus commonly fail to predict human efficacy. Advanced in vitro models, which closely mimic critical aspects of the pathology, have emerged as valuable platforms to investigate novel pharmaceutical therapies for the treatment of SSc. This review focuses on recent advancements in the development of SSc in vitro models, sheds light onto biological (e.g., growth factors, cytokines, coculture systems), biochemical (e.g., hypoxia, reactive oxygen species) and biophysical (e.g., stiffness, topography, dimensionality) cues that have been utilized for the in vitro recapitulation of the SSc microenvironment, and highlights future perspectives for effective drug discovery and validation.

Reconstruction of Vascular and Urologic Tubular Grafts by Tissue Engineering

Tissue engineering is one of the most promising scientific breakthroughs of the late 20th century. Its objective is to produce in vitro tissues or organs to repair and replace damaged ones using various techniques, biomaterials, and cells. Tissue engineering emerged to substitute the use of native autologous tissues, whose quantities are sometimes insufficient to correct the most severe pathologies. Indeed, the patient’s health status, regulations, or fibrotic scars at the site of the initial biopsy limit their availability, especially to treat recurrence. This new technology relies on the use of biomaterials to create scaffolds on which the patient’s cells can be seeded. This review focuses on the reconstruction, by tissue engineering, of two types of tissue with tubular structures: vascular and urological grafts. The emphasis is on self-assembly methods which allow the production of tissue/organ substitute without the use of exogenous material, with the patient’s cells producing their own scaffold. These continuously improved techniques, which allow rapid graft integration without immune rejection in the treatment of severely burned patients, give hope that similar results will be observed in the vascular and urological fields.

Bioinspired in vitro microenvironments to control cell fate: focus on macromolecular crowding

The development of therapeutic regenerative medicine and accurate drug discovery cell-based products requires effective, with respect to obtaining sufficient numbers of viable, proliferative, and functional cell populations, cell expansion ex vivo. Unfortunately, traditional cell culture systems fail to recapitulate the multifaceted tissue milieu in vitro, resulting in cell phenotypic drift, loss of functionality, senescence, and apoptosis. Substrate-, environment-, and media-induced approaches are under intense investigation as a means to maintain cell phenotype and function while in culture. In this context, herein, the potential of macromolecular crowding, a biophysical phenomenon with considerable biological consequences, is discussed.

Three-Dimensional Model of Hypertrophic Scar Using a Tissue-Engineering Approach

Following wound healing, skin is replaced by a specialized tissue called scar. Sometime, this scar can become pathologic, called hypertrophic scar, with a high amount of extracellular matrix, capillaries, and myofibroblast persistence. To understand the mechanisms at the origin of the fibrosis is paramount to treat patients, but despite few animal models and in vitro studies using mainly human pathological cells cultured on plastic on monolayer, the treatment of these fibrotic scars remains unsatisfactory. As in tissue, cells are most often imbedded in extracellular matrix, we have developed, using a tissue engineering method, new in vitro models to study human fibrotic skin pathologies as hypertrophic scars. Human cells isolated from hypertrophic scars are used to reconstitute a three-dimensional fibrotic skin comprising both dermal and epidermal parts. This method called the self-assembly approach is based on the cell capacity to reconstitute their own environment as in vivo. In this chapter, the described methods include extraction and culture of human scar keratinocytes and fibroblasts from cutaneous biopsies as well as the protocols to produce fibrotic skin that can be used to study pathological process.

Innovative Human Three-Dimensional Tissue-Engineered Models as an Alternative to Animal Testing

Animal testing has long been used in science to study complex biological phenomena that cannot be investigated using two-dimensional cell cultures in plastic dishes. With time, it appeared that more differences could exist between animal models and even more when translated to human patients. Innovative models became essential to develop more accurate knowledge. Tissue engineering provides some of those models, but it mostly relies on the use of prefabricated scaffolds on which cells are seeded. The self-assembly protocol has recently produced organ-specific human-derived three-dimensional models without the need for exogenous material. This strategy will help to achieve the 3R principles.

A New Animal Model for Pathological Subcutaneous Fibrosis: Surgical Technique and in vitro Analysis

Fibrosis is a condition that affects the connective tissue in an organ or tissue in the restorative or responsive phase as a result of injury. The consequences of excessive fibrotic tissue growth may lead to various physiological complications of deformity and impairment due to hypertrophic scars, keloids, and tendon adhesion without understating the psychological impact on the patient. However, no method accurately quantifies the rate and pattern of subcutaneous induced hypertrophic fibrosis. We, therefore, devised a rodent excisional model to evaluate the extent of fibrosis with talc. Tissue specimens were set on formalin, and paraffin sections for histological, immunohistochemical, and molecular analysis talc was used to induce the fibroproliferative mechanism typical of hypertrophic scars. This pathway is relevant to the activation of inflammatory and fibrotic agents to stimulate human hypertrophic scarring. This model reproduces morpho-functional features of human hypertrophic scars to investigate scar formation and assess potential anti-scarring therapies.

Human Organ-Specific 3D Cancer Models Produced by the Stromal Self-Assembly Method of Tissue Engineering for the Study of Solid Tumors

Cancer research has considerably progressed with the improvement of in vitro study models, helping to understand the key role of the tumor microenvironment in cancer development and progression. Over the last few years, complex 3D human cell culture systems have gained much popularity over in vivo models, as they accurately mimic the tumor microenvironment and allow high-throughput drug screening. Of particular interest, in vitrohuman 3D tissue constructs, produced by the self-assembly method of tissue engineering, have been successfully used to model the tumor microenvironment and now represent a very promising approach to further develop diverse cancer models. In this review, we describe the importance of the tumor microenvironment and present the existing in vitro cancer models generated through the self-assembly method of tissue engineering. Lastly, we highlight the relevance of this approach to mimic various and complex tumors, including basal cell carcinoma, cutaneous neurofibroma, skin melanoma, bladder cancer, and uveal melanoma.

Expression of apoptotic and proliferation factors in gastric mucosa of patients with systemic sclerosis correlates with form of the disease

Despite high prevalence of patients with gastric disease in systemic sclerosis (SSc), its pathogenesis is still poorly understood. We immunohistochemically analysed biopsies of gastric mucosa (GM) in 5 controls and 15 patients with different forms of SSc: limited cutaneous (lc), diffuse cutaneous moderate (sys1) and severe (sys2). The number of positive cells was analysed by a Kruskall-Wallis test, P < 0.05 was considered statistically significant. Percentage of proliferating (Ki-67 positive) cells was highest in sys1 (3% in superficial and 4,6% in deeper parts of GM), which dropped to 1% in sys2. Percentage of α-smooth muscle actin (α-SMA) positive cells was 5% in controls, 9% in superficial GM, while in deeper GM rose from 7% to 19% in sys1 and sys2, thus indicating increased myofibroblast population. Caspase-3 positive apoptotic cells characterized 1,5–2% of controls, 8% of superficial and 6% of deeper GM cells in sys1. In sys2, apoptosis affected 50% of surface epithelial and gland cells and 30% of deeper glands, and correlated with increased fibrosis and decreased syndecan-1 expression. Our data demonstrate that sys1 is the most „active” proliferating form of SSc. Sys2 characterize collagen deposition, surface epithelium defects, extensive apoptosis and low proliferation, GM atrophy and loss of function.

Isolation and Culture of Human Dermal Microvascular Endothelial Cells

Primary endothelial cells are needed for angiogenesis studies, and more particularly in the field of tissue engineering, to engineer pre-vascularized tissues. Investigations often use human umbilical vein endothelial cells due to their extensive characterization, but also because they are easy to obtain and isolate. An alternative is the use of human dermal microvascular endothelial cells, more representative of adult skin angiogenesis and vascularization processes. This chapter presents a detailed methodology to isolate and culture microvascular endothelial cells from skin biopsies based on enzymatic digestion and mechanical extraction.

Engineering Tissues without the Use of a Synthetic Scaffold: A Twenty-Year History of the Self-Assembly Method

Twenty years ago, Dr. François A. Auger, the founder of the Laboratory of Experimental Organogenesis (LOEX), introduced the self-assembly technique. This innovative technique relies on the ability of dermal fibroblasts to produce and assemble their own extracellular matrix, differing from all other tissue-engineering techniques that use preformed synthetic scaffolds. Nevertheless, the use of the self-assembly technique was limited for a long time due to its main drawbacks: time and cost. Recent scientific breakthroughs have addressed these limitations. New protocol modifications that aim at increasing the rate of extracellular matrix formation have been proposed to reduce the production costs and laboratory handling time of engineered tissues. Moreover, the introduction of vascularization strategies in vitro permits the formation of capillary-like networks within reconstructed tissues. These optimization strategies enable the large-scale production of inexpensive native-like substitutes using the self-assembly technique. These substitutes can be used to reconstruct three-dimensional models free of exogenous materials for clinical and fundamental applications.

Improved Methods to Produce Tissue-Engineered Skin Substitutes Suitable for the Permanent Closure of Full-Thickness Skin Injuries

There is a clinical need for skin substitutes to replace full-thickness skin loss. Our group has developed a bilayered skin substitute produced from the patient's own fibroblasts and keratinocytes referred to as Self-Assembled Skin Substitute (SASS). After cell isolation and expansion, the current time required to produce SASS is 45 days. We aimed to optimize the manufacturing process to standardize the production of SASS and to reduce production time. The new approach consisted in seeding keratinocytes on a fibroblast-derived tissue sheet before its detachment from the culture plate. Four days following keratinocyte seeding, the resulting tissue was stacked on two fibroblast-derived tissue sheets and cultured at the air–liquid interface for 10 days. The resulting total production time was 31 days. An alternative method adapted to more contractile fibroblasts was also developed. It consisted in adding a peripheral frame before seeding fibroblasts in the culture plate. SASSs produced by both new methods shared similar histology, contractile behavior in vitro and in vivo evolution after grafting onto mice when compared with SASSs produced by the 45-day standard method. In conclusion, the new approach for the production of high-quality human skin substitutes should allow an earlier autologous grafting for the treatment of severely burned patients.

Origin of Serum Affects Quality of Engineered Tissues Produced by the Self-Assembly Approach

Despite the emergence of serum-free media for cell culture, the use of serum to supplement the culture media is still essential in order to produce engineered urologic tissues using the self-assembly approach, not only for the stromal compartment but also for the uroepithelium. Effects of sera on thickness of these two compartments were measured and quality of the epithelial differentiation was evaluated. For bladder mucosa substitute reconstruction, the use of postnatal sera failed to produce an adequate uroepithelium whereas the fetal sera supplementation did. Postnatal sera also provided thinner stromal compartments than the one obtained using fetal sera, no matter if the fibroblasts from healthy or psoriatic donors were used to reconstruct human skin substitutes.

Production of a Self-Aligned Scaffold, Free of Exogenous Material, from Dermal Fibroblasts Using the Self-Assembly Technique

Many pathologies of skin, especially ageing and cancer, involve modifications in the matrix alignment. Such tissue reorganization could have impact on cell behaviour and/or more global biological processes. Tissue engineering provides accurate study model by mimicking the skin and it allows the construction of versatile tridimensional models using human cells. It also avoids the use of animals, which gave sometimes nontranslatable results. Among the various techniques existing, the self-assembly method allows production of a near native skin, free of exogenous material. After cultivating human dermal fibroblasts in the presence of ascorbate during two weeks, a reseeding of these cells takes place after elevation of the resulting stroma on a permeable ring and culture pursued for another two weeks. This protocol induces a clear realignment of matrix fibres and cells parallel to the horizon. The thickness of this stretched reconstructed tissue is reduced compared to the stroma produced by the standard technique. Cell count is also reduced. In conclusion, a new, easy, and inexpensive method to produce aligned tissue free of exogenous material could be used for fundamental research applications in dermatology.

Engineering approaches to study fibrosis in 3-D in vitro systems

Fibrotic diseases occur in virtually every tissue of the body and are a major cause of mortality, yet they remain largely untreatable and poorly understood on a mechanistic level. The development of anti-fibrotic agents has been hampered, in part, by the insufficient fibrosis biomimicry provided by traditional in vitro platforms. This review focuses on recent advancements toward creating 3-D platforms that mimic key features of fibrosis, as well as the application of novel imaging and sensor techniques to analyze dynamic extracellular matrix remodeling. Several opportunities are highlighted to apply new tools from the fields of biomaterials, imaging, and systems biology to yield pathophysiologically relevant in vitro platforms that improve our understanding of fibrosis and may enable identification of potential treatment targets.

Inexpensive production of near-native engineered stromas

Although the self-assembly approach is an efficient method for the production of engineered physiological and pathological tissues, avoiding the use of exogenous materials, it nevertheless remains expensive and requires dexterity, which are features incompatible with large-scale production. We propose a modification to this technique to make easier the production of mesenchymal compartment, to reduce the cost and to improve the histological quality of the self-assembled tissues. The stroma produced by this novel approach allowed epithelial cell differentiation, resulting in a pseudostratified epithelium that shared several features with native tissues. The incorporation of endothelial cells in the reconstructed mesenchyme formed a three-dimensional capillary-like network, positive for CD31 and von Willebrand factor and surrounded by NG2 positive cells. It could limit self-contraction of the resulting tissue by recruiting α-Smooth Muscle Actin positive cells. With this new technique, which is relatively inexpensive and easy to use in a research laboratory set-up, near-native stromas can now be produced with minimal handling time. Copyright © 2015 John Wiley & Sons, Ltd.

Role of seaweed laminaran from Saccharina longicruris on matrix deposition during dermal tissue-engineered production

Our laboratory has developed a technique to reconstruct in vitro tissue from human cells using the self-assembly tissue-engineering method, which utilizes the ability of fibroblasts to deposit the matrix they secrete. The time necessary for tissue construction, several weeks, is a drawback for many clinical uses. We hypothesized that the addition of laminaran can increase the deposition of matrix, speeding up the production of the tissue. Laminaran was isolated from the brown seaweed Saccharina longicruris harvested in Canada and its structure was evaluated. Laminaran is a small molecular weight polysaccharide composed of linear glucose chains. Monolayer-cultured human skin fibroblasts were cultured in the presence of laminaran with ascorbate for 7 or 35 days to produce a dermis. Treatment did not induce any variation in the growth rate or alpha smooth muscle actin content but it did increase the deposition of collagen I in a dose-dependent manner. After 35 days, the reconstructed dermal thickness was increased when laminaran was added, and collagen I deposition and MMP activity were also significantly increased. Thus, laminaran can be used to increase the rate of production of reconstructed self-assembled dermis and can also potentially be used in cosmetic or therapeutic creams to stimulate matrix production.

Reconstitution of skin fibrosis development using a tissue engineering approach

Skin fibrosis is involved in several pathologies as hypertrophic scar or scleroderma. The determination of the mechanisms at the origin of these problems is however difficult due to the low number of in vivo models. To bypass this absence of animal models, studies typically use human pathological cells cultured in a monolayer way on plastic. However, cell behavior is different according to the fact that cells are on plastic or embedded in matrix. Using a tissue engineering method, we have developed new in vitro models to study these pathologies of the skin. Human pathological cells are used to reconstitute a three dimensional fibrotic tissue comprising the dermal and the epidermal parts of the skin. This method is called the self-assembly approach and is based on the cell capacity to reconstitute in vitro their own environment as in vivo. In this chapter, protocols generating reconstructed pathological skin using this approach are detailed. The methods include extraction and culture of human skin keratinocytes and fibroblasts from very small cutaneous biopsies. In addition, a description of the protocols for the production of fibrotic dermal sheets can be found to obtain a model of fibrotic dermis that can be associated or not with a fully differentiated epidermis.

Proteasome inhibition prevents development of experimental dermal fibrosis

Scleroderma is a chronic fibrotic disorder. Bortezomib, a proteasome inhibitor, is reported to attenuate experimentally induced renal and cardiac fibrosis. This study aimed to evaluate the preventive and therapeutic efficacies of bortezomib on a bleomycin (BLM)-induced scleroderma model. Dermal fibrosis was induced in Balb/c mice by subcutaneous BLM (100 μg/day) injections. Bortezomib (1.6 mg/kg twice/week) was applied intraperitoneally to BLM-injected mice during the first 3 weeks for preventive interventions and in the second 3 weeks for therapeutic interventions. IL-4 and TGF-β1 serum levels, dermal thicknesses, dermal inflammatory cell counts, and α-SMA-positive fibroblastic cell counts were determined, and type-I collagen, NF-κBp65, I-κBα, and JNK1 expressions were assessed. BLM applications increased serum IL-4 level, dermal inflammatory cell counts, α-SMA-positive cell counts, expression of type-I collagen, NF-κB, and JNK1, and dermal thickness in early stage of fibrosis, but serum IL-4 level and dermal inflammatory cell counts showed no increases in later stages. As a preventive intervention, bortezomib decreased dermal thickness, inflammatory cell infiltrations, fibroblastic activity, and expression of type-I collagen, NF-κB, and JNK1, but did not decrease fibroblastic activity and dermal thickness at later stages of fibrosis. Inflammatory status is prominent in the early stage of dermal fibrosis, but declines at later stages. In BLM-induced dermal fibrosis, bortezomib has a preventive anti-fibrotic and anti-inflammatory efficacy, but has no therapeutic anti-fibrotic efficacy in preexisting tissue fibrosis. These findings suggest that the effect of proteasome inhibition in early stages of dermal fibrosis may be related to its anti-inflammatory effects.

Abnormal collagen V deposition in dermis correlates with skin thickening and disease activity in systemic sclerosis

OBJECTIVE

The physiological and mechanical properties of the skin, the primary tissue affected by systemic sclerosis, depend on the assembly of collagen types I, III and V, which form heterotypic fibers. Collagen V (COLV) regulates heterotypic fiber diameter, and the maintenance of its properties is important for maintaining normal tissue architecture and function. Based on a COLV-induced experimental SSc model, in which overexpression of abnormal COLV was a prominent feature, we assumed that this abnormality could be present in SSc patients and could be correlated to disease duration, skin thickening and disease activity.

METHODS

Skin biopsies from 18 patients (6 early-stage and 12 late-stage) and 10 healthy controls were studied. Skin thickening assessment was performed with the Modified Rodnan Skin Score (MRSS), and activity was calculated using the Valentini Disease Activity Index. Morphology, morphometry of COLV deposition in dermis, as well as, quantitative RT-PCR and 3D-reconstruction of the dermal fibroblast culture were performed.

RESULTS

Structurally abnormal COLV was overexpressed in SSc skin, mainly in the early stages of the disease, when compared to normal controls and late-stage. A positive correlation between COLV expression and MRSS and disease activity was observed. Collagen V alpha-1 and alpha-2 mRNA expression levels were higher in SSc. Tridimensional reconstruction of SSc dermal heterotypic fibers confirmed the presence of atypical COLV.

CONCLUSION

Increased synthesis of abnormal COLV and its correlation with disease stage, activity and MRSS suggest that this collagen can be a possible trigger involved in the pathogenesis of SSc.

Angiogenic properties of myofibroblasts isolated from normal human skin wounds

During wound healing, angiogenesis plays a crucial role in inducing adequate perfusion of the new tissue, thereby allowing its survival. This angiogenic process contributes to the formation of granulation tissue, alongside myofibroblasts. Myofibroblasts are cells specialized in wound contraction and synthesis of new extracellular matrix. Fibroblasts, considered by some to be at the origin of myofibroblasts, have already been shown to promote neovascularization. Thus, we hypothesized that myofibroblasts play a key role during angiogenic development in wound healing. We isolated myofibroblasts from normal human skin wounds and dermal microvascular endothelial cells (HDMVEC) and fibroblasts from skin. Using an in vitro fibrin-based model, we compared the proangiogenic activity of wound myofibroblasts to that of fibroblasts in the presence of HDMVEC. By immunostaining with collagen IV antibodies, we observed the formation of a capillary network significantly more developed when HDMVEC were cultured with myofibroblasts compared to the network formed in the presence of fibroblasts. The differences between these cell types did not result from a differential secretion of Vascular Endothelial Growth Factor or basic Fibroblast Growth Factor. However, in the presence of myofibroblasts, a significant decrease in matrix metalloproteinase activity was observed. This finding was correlated with a significant increase in Tissue Inhibitor of MetalloProteinase (TIMP)-1 and TIMP-3. Furthermore, inhibition of TIMP-1 secretion using shRNA significantly decreased myofibroblasts induced angiogenesis. These results led to the hypothesis that normal wound myofibroblasts contribute to the vascular network development during wound healing. Our data emphasize the critical role of wound myofibroblasts during healing.

Apoptosis modulation as a promising target for treatment of systemic sclerosis

Diffuse systemic sclerosis (SSc) is a fatal autoimmune disease characterized by an excessive ECM deposition inducing a loss of function of skin and internal organs. Apoptosis is a key mechanism involved in all the stages of the disease: vascular damage, immune dysfunction, and fibrosis. The purpose of this paper is to gather new findings in apoptosis related to SSc, to highlight relations between apoptosis and fibrosis, and to identify new therapeutic targets.

Profibrotic phenotype of conjunctival fibroblasts from mucous membrane pemphigoid

Ocular mucous membrane pemphigoid is an immunobullous disease in which excessive conjunctival fibrosis causes blindness, and the pathogenesis of scarring is incompletely understood. To establish whether profibrotic fibroblasts with an altered phenotype exist in ocular mucous membrane pemphigoid, we compared the functional characteristics of pemphigoid conjunctival fibroblasts to normal conjunctival fibroblasts with respect to cell division; migration; collagen contraction; matrix metalloproteinase, secretion of collagen and chemokines; and myofibroblast differentiation. We found that pemphigoid fibroblasts showed increased cell division (P = 0.01), increased migration in serum-free medium (72 ± 18 migrated cells versus 33 ± 11, P = 0.04), increased collagen contraction in the presence of 10 ng/ml tumor necrosis factor-α, increased collagen type I secretion (P = 0.03), increased secretion of matrix metalloproteinase-3 (P = 0.03), and increased secretion of eotaxin in response to interleukin-13 (P = 0.04). Differences between pemphigoid and normal conjunctival fibroblasts with respect to collagen contraction and MMP secretion in the presence of interleukin-13 were also observed. Together, these findings indicate that pemphigoid conjunctival fibroblasts have a profibrotic phenotype that is maintained in vitro. No differences between pemphigoid fibroblasts obtained from acutely inflamed versus clinically uninflamed conjunctiva were observed. Developing effective antifibrotic therapies will require understanding of the mechanisms that both induce and maintain the profibrotic phenotype.

UV laser-ablated surface textures as potential regulator of cellular response

Textured surfaces obtained by UV laser ablation of poly(ethylene terephthalate) films were used to study the effect of shape and spacing of surface features on cellular response. Two distinct patterns, cones and ripples with spacing from 2 to 25 μm, were produced. Surface features with different shapes and spacings were produced by varying pulse repetition rate, laser fluence, and exposure time. The effects of the surface texture parameters, i.e., shape and spacing, on cell attachment, proliferation, and morphology of neonatal human dermal fibroblasts and mouse fibroblasts were studied. Cell attachment was the highest in the regions with cones at ∼4 μm spacing. As feature spacing increased, cell spreading decreased, and the fibroblasts became more circular, indicating a stress-mediated cell shrinkage. This study shows that UV laser ablation is a useful alternative to lithographic techniques to produce surface patterns for controlling cell attachment and growth on biomaterial surfaces.