The Optimization of Process Parameters and Characterization of High-Performance CF/PEEK Composites Prepared by Flexible CF/PEEK Plain Weave Fabrics

Continuous carbon fiber (CF)-reinforced poly (ether ether ketone) (PEEK) composites have excellent mechanical properties, but their processing techniques are limited. Therefore, we promoted a braiding method based on the hybrid fiber method by hot-compacting CF/PEEK plain weave fabrics to solve the problem of difficult wetting between CF and PEEK. Four parameters—melting temperature, molding pressure, crystallization temperature and the resin contents—were investigated for optimized fabrication. After studying the melting range, thermal stability and the contact angle of PEEK under different temperatures, the melting temperature was set at 370 °C. An ultra-depth-of-field 3D microscope was adopted to investigate the effects of molding pressure in the melting stage. The tensile strength or modulus along and perpendicular to the carbon fiber direction and crystallinity under different crystallization temperatures were analyzed. As a result, the sample crystalized at 300 °C showed an excellent tensile properties and crystallinity. The increased mass ratio of PEEK ranging from 50.45% to 59.07% allowed for much stronger interfacial strength; however, the higher resin content can lead to the dispersion of CFs, loss of resin and the formation of defects during processing. Finally, the optimal resin mass content was 59.07%, with a tensile strength of 738.36 ± 14.49 MPa and a flexural strength of 659.68 ± 57.53 MPa. This paper studied the optimized processing parameters to obtain better properties from CF/PEEK plain weave fabrics and to further broaden the specific applications of CF/PEEK composites, demonstrating a new direction for its fabrication.

Enhanced Ductility of PEEK thin film with self-assembled fibre-like crystals

Poly Ether Ether Ketone (PEEK) is a high temperature polymer material known for its excellent chemical resistance, high strength and toughness. As a semi-crystalline polymer, PEEK can become very brittle during long crystallisation times and temperatures helped as well by its high content of rigid benzene rings within its chemical structure. This paper presents a simple quench crystallization method for preparation of PEEK thin films with the formation of a novel fibre-like crystal structure on the surface of the films. These quenched crystallised films show higher elongation at break when compared with conventional melt crystallised thin films incorporating spherulitic crystals, while the tensile strength of both types of films (quenched crystallised and conventional melt) remained the same. The fracture analysis carried out using microscopy revealed an interesting microstructure which evolves as a function of annealing time. Based on these results, a crystal growth mechanism describing the development of the fibre-like crystals on the surface of the quenched crystallised films is proposed.