Proton Conducting Organic-Inorganic Composite Membranes for All-Vanadium Redox Flow Battery

The quest for a cost-effective, chemically-inert, robust and proton conducting membrane for flow batteries is at its paramount. Perfluorinated membranes suffer severe electrolyte diffusion, whereas conductivity and dimensional stability in engineered thermoplastics depend on the degree of functionalization. Herein, we report surface-modified thermally crosslinked polyvinyl alcohol-silica (PVA-SiO₂) membranes for the vanadium redox flow battery (VRFB). Hygroscopic, proton-storing metal oxides such as SiO₂, ZrO₂ and SnO₂ were coated on the membranes via the acid-catalyzed sol-gel strategy. The membranes of PVA-SiO₂-Si, PVA-SiO₂-Zr and PVA-SiO₂-Sn demonstrated excellent oxidative stability in 2 M H₂SO₄ containing 1.5 M VO₂⁺ ions. The metal oxide layer had good influence on conductivity and zeta potential values. The observed trend for conductivity and zeta potential values was PVA-SiO₂-Sn > PVA-SiO₂-Si > PVA-SiO₂-Zr. In VRFB, the membranes showcased higher Coulombic efficiency than Nafion-117 and stable energy efficiencies over 200 cycles at the 100 mA cm^-2 current density. The order of average capacity decay per cycle was PVA-SiO₂-Zr < PVA-SiO₂-Sn < PVA-SiO₂-Si < Nafion-117. PVA-SiO₂-Sn had the highest power density of 260 mW cm^-2, while the self-discharge for PVA-SiO₂-Zr was ~3 times higher than Nafion-117. VRFB performance reflects the potential of the facile surface modification technique to design advanced membranes for energy device applications.

Influence of Mixed Imide Composition and Thermal Annealing on Ionic Liquid Uptake and Conductivity of Polyimide-Poly(ethylene glycol) Segmented Block Copolymer Membranes

Understanding the impact of different bridging groups in the two-step polymerization of poly(ethylene glycol) (PEG)-incorporated polyimide (PI) materials is significant. It is known that the proton exchange membranes (PEMs) used in industry today can experience performance degradation under rising temperature conditions. Many efforts have been devoted to overcoming this problem by improving the physical and mechanical properties that extend the hygrothermal life of a PEM. This work examines the effect of oxygenated and fluorinated bridging anhydrides in the production of PI-PEG PEMs. It is shown that the dianhydride identity and the amount incorporated in the synthesis influences the properties of the segmented block copolymer (SBC) membranes, such as increased ionic liquid uptake (ILU), enhanced conductivity and higher Young's modulus favoring stiffness comparable to Nafion 115, an industrial standard. Investigations on the ionic conductivity of PI-PEG membranes were carried out to determine how thermal annealing would affect the material's performance as an ion-exchange membrane. By applying a thermal annealing process at 60 °C for one hour, the conductivities of synthesized segmented block copolymer membranes values were increased. The effect of thermal annealing on the mechanical properties was also shown for the undoped SBC via measuring the change in the Young's modulus. These higher ILU abilities and mechanical behavior changes are thought to arise from the interaction between PEG molecules and ethylammonium nitrate (EAN) ionic liquid (IL). In addition, higher interconnected routes provide a better ion-transfer environment within the membrane. It was found that the conductivity was increased by a factor of ten for undoped and a factor of two to seven for IL-doped membranes after thermal annealing.

Sulfonated copoly(arylene ether nitriles) as proton exchange membrane with excellent mechanical and thermal properties

A series of sulfonated biphenol poly(arylene ether nitriles) (BP-SPEN) copolymers were synthesized by the nucleophilic aromatic substitution polymerization of 2,6-difluorobenzonitrile with different ratios of hydroquinonesulfonic acid potassium salt and biphenol in the presence of potassium carbonate. The composition and structures of the BP-SPEN copolymers were characterized by Fourier transform infrared spectroscopy. Thermal properties, mechanical properties, proton conductivity, and water uptake of copolymer membranes were also investigated. The results showed that they present high glass transition temperature ranging from 131°C to 180°C and good thermal stability with the 5% weight loss temperatures in the range of 284–287°C under nitrogen atmosphere. They also exhibited good mechanical property with the tensile strength in the range of 68–109 MPa in the dry state and 31–72 MPa in the wet state. Furthermore, these copolymer membranes exhibited good water uptake ranging from 8.8% to 39.9%. Thus, the membranes had good proton conductivities in the range of 1.09 × 10−5–1.54 × 10−3 S cm−1 at room temperature and 100% relative humidity. The influence of temperature on water uptakes, tensile strength, and proton conductivity was also investigated.

Hyperbranched polyester and its sodium titanate nanocomposites as proton exchange membranes for fuel cells

Sulfonated hyperbranched polyesters and their hybrids with sodium titanate nanowire were used to prepare novel proton exchange membranes for fuel cells.