Methacrylate hydrogels reinforced with bacterial cellulose

Bacterial cellulose: A promising biopolymer with interesting properties and applications

The ever-increasing demands for materials with desirable properties led to the development of materials that impose unfavorable influences on the environment and the ecosystem. Developing a low-cost, durable, and eco-friendly functional material with biological origins has become necessary to avoid these consequences. Bacterial cellulose generated by bacteria dispenses excellent structural and functional properties and satisfies these requirements. BC and BC-derived materials are essential in developing pure and environmentally safe functional materials. This review offers a detailed understanding of the biosynthesis of BC, properties, various functionalization methods, and applicability in biomedical, water treatment, food storage, energy conversion, and energy storage applications.

Fluorescent dialdehyde-BODIPY chitosan hydrogel and its highly sensing ability to Cu2+ ion

Fluorescent hydrogel with proper hydrophilicity and thermal stability, excellent sensitivity and high selectivity has important practical and scientific significance, especially in heavy metal ion detection. In this work, by adjusting the content of [2, 6-Bis-[4-formylthiophene]]-1,3,5,7-tetramethyl-8-phenyl-4, 4-difluoroborazaindoloene (B3), as a cross-linking agent, a series of chitosan- fluoroboron dipyrrole-chitosan-based fluorescent hydrogels (CBC) with large stokes shift were designed and prepared. The hydrogels can be used as fluorescent probes for identifying Cu²⁺ in aqueous solution. The linear quenching range of Cu²⁺ is 0-50 μM, and the detection limit and quenching constant are 4.75 μM and 3.52 × 10⁴ M^-1, respectively. Under the interaction of Cu²⁺, the imine bond CN was converted to C- N bond, which causes the phenomenon of fluorescence quenching. In addition, relatively high crosslink density improves hydrophilicity and thermal stability of initial chitosan, and made the swelling ability better.

Mechanical Properties of Bioengineered Corneal Stroma

For the majority of patients with severe corneal injury or disease, corneal transplantation is the only suitable treatment option. Unfortunately, the demand for donor corneas greatly exceeds the availability. To overcome shortage issues, a myriad of bioengineered constructs have been developed as mimetics of the corneal stroma over the last few decades. Despite the sheer number of bioengineered stromas developed , these implants fail clinical trials exhibiting poor tissue integration and adverse effects in vivo. Such shortcomings can partially be ascribed to poor biomechanical performance. In this review, existing approaches for bioengineering corneal stromal constructs and their mechanical properties are described. The information collected in this review can be used to critically analyze the biomechanical properties of future stromal constructs, which are often overlooked, but can determine the failure or success of corresponding implants.

Protein and Polysaccharide-Based Electroactive and Conductive Materials for Biomedical Applications

Electrically responsive biomaterials are an important and emerging technology in the fields of biomedical and material sciences. A great deal of research explores the integral role of electrical conduction in normal and diseased cell biology, and material scientists are focusing an even greater amount of attention on natural and hybrid materials as sources of biomaterials which can mimic the properties of cells. This review establishes a summary of those efforts for the latter group, detailing the current materials, theories, methods, and applications of electrically conductive biomaterials fabricated from protein polymers and polysaccharides. These materials can be used to improve human life through novel drug delivery, tissue regeneration, and biosensing technologies. The immediate goal of this review is to establish fabrication methods for protein and polysaccharide-based materials that are biocompatible and feature modular electrical properties. Ideally, these materials will be inexpensive to make with salable production strategies, in addition to being both renewable and biocompatible.

Mechanism and Compatibility of Pretreated Lignocellulosic Biomass and Polymeric Mixed Matrix Membranes: A Review

In this paper, a review of the compatibility of polymeric membranes with lignocellulosic biomass is presented. The structure and composition of lignocellulosic biomass which could enhance membrane fabrications are considered. However, strong cell walls and interchain hindrances have limited the commercial-scale applications of raw lignocellulosic biomasses. These shortcomings can be surpassed to improve lignocellulosic biomass applications by using the proposed pretreatment methods, including physical and chemical methods, before incorporation into a single-polymer or copolymer matrix. It is imperative to understand the characteristics of lignocellulosic biomass and polymeric membranes, as well as to investigate membrane materials and how the separation performance of polymeric membranes containing lignocellulosic biomass can be influenced. Hence, lignocellulosic biomass and polymer modification and interfacial morphology improvement become necessary in producing mixed matrix membranes (MMMs). In general, the present study has shown that future membrane generations could attain high performance, e.g., CO2 separation using MMMs containing pretreated lignocellulosic biomasses with reachable hydroxyl group radicals.

Controlled Hydration, Transition, and Drug Release Realized by Adjusting Layer Thickness in Alginate-Ca2+/poly(N-isopropylacrylamide) Interpenetrating Polymeric Network Hydrogels on Cotton Fabrics

The controlled hydration, transition, and drug release are realized by adjusting layer thickness in thermoresponsive interpenetrating polymeric network (IPN) hydrogels on cotton fabrics. IPN hydrogels are synthesized by sodium alginate (SA) and poly(N-isopropylacrylamide) (PNIPAM) with a ratio of 1:5/% (w/v). The cotton-fabric-supported IPN hydrogels with a thickness of 1000 μm exhibit a transition temperature (TT) at 35.2 °C. When the hydrogel thicknesses are thinned to 500 and 250 μm, the TTs are reduced to 34.8 and 34.1 °C, respectively. Interestingly, the morphology of IPN hydrogels switches from a well-defined honeycomb-like network structure (1000 μm) to a densely packed layer structure (250 μm). The thinner layers not only present a smaller extent of hydration and collapse but also require longer time to reach an equilibrium state, which can be attributed to the more pronounced hindrance of the chain rearrangement by the cotton fabrics. To address the influence of layer thickness on the drug release, we compare the release rate and cumulative release percentage of the test drugs tetracycline hydrochloride (TCH) and levofloxacin hydrochloride (LH) between pure IPN hydrogels and cotton-fabric-supported IPN hydrogels (250, 500, and 1000 μm) at 25 °C (below the TT) and 37 °C (above the TT). Because of the compressive stress from the collapsed hydrogels, a higher release is observed in both hydrogels when the temperature is above TT. The cotton fabric induces a slower and less prominent drug release in IPN hydrogels. Thus, combining the obtained correlation between the transition and hydrogels layer thickness, the drug release in cotton-fabric-supported IPN hydrogels can be regulated by the layer thickness, which appears especially suitable for a controlled release in wound dressing applications.

Understanding the Structure and Dynamics of Nanocellulose-Based Composites with Neutral and ionic Poly(methacrylate) Derivatives using Inelastic Neutron Scattering and DFT Calculations

Bacterial nanocellulose (BC)-based composites containing poly(2-hydroxyethyl methacrylate) (PHEMA), poly(methacroylcholine chloride) (PMACC) or poly(methacroylcholine hydroxide) (PMACH) were characterized by inelastic neutron scattering (INS) spectroscopy, combined with DFT (density functional theory) calculations of model systems. A reasonable match between calculated and experimental spectral lines and their intensities was used to support the vibrational assignment of the observed bands and to validate the possible structures. The differences between the spectra of the nanocomposites and the pure precursors indicate that interactions between the components are stronger for the ionic poly(methacrylate) derivatives than for the neutral counterpart. Displaced anions interact differently with cellulose chains, due to the different ability to compete with the O-H···O hydrogen bonds in cellulose. Hence, the INS is an adequate technique to delve deeper into the structure and dynamics of nanocellulose-based composites, confirming that they are true nanocomposite materials instead of simple mixtures of totally independent domains.

Poly(glycidyl methacrylate)/bacterial cellulose nanocomposites: Preparation, characterization and post-modification

Nanocomposites composed of poly(glycidyl methacrylate) (PGMA) and bacterial cellulose (BC) were prepared by the in-situ free radical polymerization of glycidyl methacrylate (GMA) inside the BC network. The resulting nanocomposites were characterized in terms of structure, morphology, water-uptake capacity, thermal stability and viscoelastic properties. The three-dimensional structure of BC endowed the nanocomposites with good thermal stability (up to 270 °C) and viscoelastic properties (minimum storage modulus = 80 MPa at 200 °C). In addition, the water-uptake and crystallinity decreased with the increasing content of the hydrophobic and amorphous PGMA matrix. These nanocomposites were then submitted to post-modification via acid-catalysed hydrolysis to convert the hydrophobic PGMA into the hydrophilic poly(glyceryl methacrylate) (PGOHMA) counterpart, which increased the hydrophilicity of the nanocomposites and consequently improved their water-uptake capacity. Besides, the post-modified nanocomposites maintained a good thermal stability (up to 250 °C), viscoelastic properties (minimum storage modulus = 171 MPa at 200 °C) and porous structure. In view of these results, the PGMA/BC nanocomposites can be used as functional hydrophobic nanocomposites for post-modification reactions, whereas the PGOHMA/BC nanocomposites might have potential for biomedical applications requiring hydrophilic, swellable and biocompatible materials.

Bacterial cellulose-poly(acrylic acid-co-N,N′-methylene-bis-acrylamide) interpenetrated networks for the controlled release of fertilizers

In this study, composite hydrogels with interpenetrated polymer networks (IPNs), based on bacterial cellulose (BC) and poly(acrylic acid-co-N,N′-methylene-bis-acrylamide) (PAA), were synthesized by radical polymerization and characterized herein for the first time. Liquid fertilizer (LF) formulations, containing potassium, phosphorus, ammonium oxides and micronutrients, were encapsulated directly into the IPNs of the composite hydrogels during synthesis. Thermal analyses and scanning electron microscopy of control and composite xerogels highlighted the formation of IPNs between BC and PAA. Swelling determinations confirmed the influence of the crosslinker and of the liquid fertilizer concentration upon the density of the IPNs. Further rheology studies and release profiles indicated how the presence of BC and the increase of the crosslinking density of IPNs improved the mechanical strength and the release profile of LF for the innovative composite BC-PAA hydrogels. Results regarding the fertilizer release indicated that the presence of the BC led to a more controlled liberation of the fertilizer proving that this new formulation is potentially viable for application in agricultural practices.

In this study, composite hydrogels with interpenetrated polymer networks (IPNs), based on bacterial cellulose (BC) and poly(acrylic acid-co-N,N′-methylene-bis-acrylamide) (PAA) were synthesized by radical polymerization.

Extraction and modification of cellulose nanofibers derived from biomass for environmental application

Cellulose nanofibers obtained from various plants and microbial sources, their extraction methods and various environmental applications are discussed.

Reinforcement of bacterial cellulose aerogels with biocompatible polymers

•

Reinforcement of cellulose aerogels with biopolymers PLA, PCL, CA and PMMA.

•

Interpenetrating and open porous networks of cellulose and biocompatible polymers.

•

scCO₂ anti-solvent precipitation and extraction used as core techniques.

•

Cellulose aerogels used as template for the preparation of porous PMMA scaffolds.

Bacterial cellulose (BC) aerogels, which are fragile, ultra-lightweight, open-porous and transversally isotropic materials, have been reinforced with the biocompatible polymers polylactic acid (PLA), polycaprolactone (PCL), cellulose acetate (CA), and poly(methyl methacrylate) (PMMA), respectively, at varying BC/polymer ratios. Supercritical carbon dioxide anti-solvent precipitation and simultaneous extraction of the anti-solvent using scCO₂ have been used as core techniques for incorporating the secondary polymer into the BC matrix and to convert the formed composite organogels into aerogels.

Uniaxial compression tests revealed a considerable enhancement of the mechanical properties as compared to BC aerogels. Nitrogen sorption experiments at 77 K and scanning electron micrographs confirmed the preservation (or even enhancement) of the surface-area-to-volume ratio for most of the samples.

The formation of an open-porous, interpenetrating network of the second polymer has been demonstrated by treatment of BC/PMMA hybrid aerogels with EMIM acetate, which exclusively extracted cellulose, leaving behind self-supporting organogels.

Biocompatible bacterial cellulose-poly(2-hydroxyethyl methacrylate) nanocomposite films

A series of bacterial cellulose-poly(2-hydroxyethyl methacrylate) nanocomposite films was prepared by in situ radical polymerization of 2-hydroxyethyl methacrylate (HEMA), using variable amounts of poly(ethylene glycol) diacrylate (PEGDA) as cross-linker. Thin films were obtained, and their physical, chemical, thermal, and mechanical properties were evaluated. The films showed improved translucency compared to BC and enhanced thermal stability and mechanical performance when compared to poly(2-hydroxyethyl methacrylate) (PHEMA). Finally, BC/PHEMA nanocomposites proved to be nontoxic to human adipose-derived mesenchymal stem cells (ADSCs) and thus are pointed as potential dry dressings for biomedical applications.