An overview of nasal cartilage bioprinting: from bench to bedside

Nasal cartilage diseases and injuries are known as significant challenges in reconstructive medicine, affecting a substantial number of individuals worldwide. In recent years, the advent of three-dimensional (3D) bioprinting has emerged as a promising approach for nasal cartilage reconstruction, offering potential breakthroughs in the field of regenerative medicine. This paper provides an overview of the methods and challenges associated with 3D bioprinting technologies in the procedure of reconstructing nasal cartilage tissue. The process of 3D bioprinting entails generating a digital 3D model using biomedical imaging techniques and computer-aided design to integrate both internal and external scaffold features. Then, bioinks which consist of biomaterials, cell types, and bioactive chemicals, are applied to facilitate the precise layer-by-layer bioprinting of tissue-engineered scaffolds. After undergoing in vitro and in vivo experiments, this process results in the development of the physiologically functional integrity of the tissue. The advantages of 3D bioprinting encompass the ability to customize scaffold design, enabling the precise incorporation of pore shape, size, and porosity, as well as the utilization of patient-specific cells to enhance compatibility. However, various challenges should be considered, including the optimization of biomaterials, ensuring adequate cell viability and differentiation, achieving seamless integration with the host tissue, and navigating regulatory attention. Although numerous studies have demonstrated the potential of 3D bioprinting in the rebuilding of such soft tissues, this paper covers various aspects of the bioprinted tissues to provide insights for the future development of repair techniques appropriate for clinical use.

Thermal and UV Curable Formulations of Poly(propylene glycol)-Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting

In this work, isocyanate-free formulations for poly(propylene glycol) polyurethane elastomers are studied. These formulations are based on poly(propylene glycol) end-capped by CO2-sourced cyclic carbonate (bisCC PPG) macromonomers able to react with amines leading to poly(hydroxyurethane)s. In order to obtain covalent networks, two curing approaches are studied. First, the direct thermally activated cross-linking of bisCC PPG with a mixture of various aliphatic or aromatic diamines and a triamine is investigated, and in particular the nature of the diamine on the mechanical properties. In the second approach, UV-activated formulations are developed by reacting bisCC PPG with allylamine followed by the addition of a trithiol by photoactivated thiol-ene reaction. The swelling tests show that both systems provide highly cross-linked polymer networks and complementary characterizations highlighted excellent mechanical properties. Thanks to the fast curing and adapted viscosity of the developed photoactive formulation, the latter was found suitable for use as a photoresin for 3D printing as demonstrated by printing a vaginal ring by a nozzle-based photoprinter.

Pyrolysis properties and kinetics of photocured waste from photopolymerization-based 3D printing: A TG-FTIR/GC-MS study

The emerging photopolymerization-based 3D printing industry has led to a growing concern for the disposal of photocured waste (PCW), which is inevitably generated during the life cycle of photopolymerization-based 3D printing. In order to shed light on suitable thermochemical treatment and utilization approaches of PCW, this work comprehensively investigated the properties and kinetics during PCW pyrolysis via TG-FTIR/GC-MS analysis. The results demonstrated that the main decomposition of PCW sample happened in the range 320-550 °C with a total weight loss of 93.34 wt%. According to the result of four kinetic models, the activation energy of PCW sample was approximately 228.58-245.05 kJ/mol. Finally, the FTIR and GC-MS results manifested that the main components of volatiles released at different heating rates were the same. The volatiles mainly include (S)-(+)-2-hydroxy-2-phenylprop, benzaldehyde, benzophenone (photo-initiator), benzoic acid, benzoylformic acid etc., which have a multitude of potential applications. However, these volatiles produced by PCW pyrolysis have a certain toxicity and potential hazard. This study demonstrates insightful fundamentals for thermochemical disposal of PCW, which appears to be potentially valuable with the rapid development of the photopolymerization-based 3D printing industry.

Photo-Curing Kinetics of 3D-Printing Photo-Inks Based on Urethane-Acrylates

In this study, photo-curing kinetics for urethane-acrylate-based photo-inks for 3D printing were evaluated using a photo-differential scanning calorimetry analysis. Initially, the photopolymerization kinetics of di- and monofunctional monomers were separately studied at different temperatures (5–85 °C). Later, the photo-curing kinetics and mechanical properties of photo-inks based on different monomer mixtures (40/60–20/80) were evaluated. The results showed that urethane-dimethacrylate (UrDMA) and urethane-acrylate (UrA) had no light absorption in the region of 280–700 nm, making them a proper crosslinker and a reactive diluent, respectively, for the formulation of 3D-printing photo-inks. The kinetics investigations showed a temperature dependency for the photo-curing of UrDMA, where a higher photopolymerization rate (Rp,max: from 5.25 × 10−2 to 8.42 × 10−2 1/s) and double-bound conversion (DBCtotal: from 63.8% to 92.2%) were observed at elevated temperatures (5–85 °C), while the photo-curing of UrA was independent of the temperature (25–85 °C). Enhancing the UrA content from 60% to 80% in the UrDMA/UrA mixtures initially increased and later decreased the photopolymerization rate and conversion, where the mixtures of 30/70 and 25/75 presented the highest values. Meanwhile, increasing the UrA content led to lower glass transition temperatures (Tg) and mechanical strength for the photo-cured samples, where the mixture of 30/70 presented the highest maximum elongation (εmax: 73%).