Synthesis and characterization of functionalized water soluble cationic poly(ester amide)s

Synthesis and Mass Spectrometry Structural Assessment of Polyesteramides Based on ε-Caprolactone and L-Phenylalanine

L-Phenylalanine-ε-caprolactone-based polyesteramides (PCPs) were synthesized via melt polycondensation across a diverse range of molar compositions. The copolymer structure was extensively characterized using nuclear magnetic resonance (NMR) and matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS). NMR analysis confirmed the intercalation of the L-Phenylalanine comonomer units within the polyester backbone. MALDI MS characterization further demonstrated the formation of linear PCP chains with carboxyl end groups. A detailed structural analysis through MALDI MS/MS fragmentation indicated that ester bond scission was the predominant fragmentation mechanism, depicting the polyesteramide sequence in the copolymers. The resulting copolymers were primarily amorphous, except for those with molar compositions of 90/10 and 80/20, which exhibited semi-crystalline structures. Additionally, these PCPs showed an increase in glass transition temperatures with higher amino acid contents and demonstrated good thermal stabilities, as evidenced by a 10% mass loss at elevated temperatures.

Development and Characterization of Transdermal Patches Using Novel Thymoquinone-L-Arginine-Based Polyamide Nanocapsules for Potential Use in the Management of Psoriasis

Thymoquinone (TQ) is a phytochemical compound present in Nigella sativa and has potential benefits for treating dermatological conditions such as psoriasis. However, its clinical use is limited due to its restricted bioavailability, caused mainly by its low solubility and permeability. To overcome this, a new transdermal drug delivery system is required. Nanoparticles are known to enhance material solubility and permeability, and hence, this study aimed to synthesize TQ-loaded L-arginine-based polyamide (TQ/Arg PA) nanocapsules incorporated into transdermal patches for prolonged delivery of TQ. To achieve this, Eudragit E polymer, plasticizers, and aloe vera as penetration enhancer were used to develop the transdermal patch. Furthermore, novel TQ/Arg-PA was synthesized via interfacial polymerization, and the resultant nanocapsules (NCs) were incorporated into the matrix transdermal patch. The Arg-PA NCs' structure was confirmed via NMR and FTIR, and optimal TQ/Arg-PA NCs containing formulation showed high entrapment efficiency of TQ (99.60%). Molecular and thermal profiling of TQ/Arg-PA and the transdermal patch revealed the effective development of spherical NCs with an average particle size of 129.23 ± 18.22 nm. Using Franz diffusion cells and synthetic membrane (STRAT M®), the in vitro permeation profile of the prepared patches demonstrated an extended release of TQ over 24 h, with enhanced permeation by 42.64% when aloe vera was employed. In conclusion, the produced formulation has a potential substitute for corticosteroids and other drugs commonly used to treat psoriasis due to its effectiveness, safety, and lack of the side effects typically associated with other drugs.

Rapid synthesis of functional poly(ester amide)s through thiol-ene chemistry

Poly(ester amide)s (PEAs) bearing various side chains were synthesized by post-polymerization modification of PA-1, a vinylidene containing PEA. The thiols 1-dodecanethiol (1A-SH), 2-phenylethanethiol (1B-SH), 2-mercaptoethanol (1C-SH), thioglycolic acid (1D-SH), furfuryl mercaptan (1E-SH) and sodium-2-mercaptoethanesulfonate (1F-SH) were reacted with PA-1 to form PEAs PA-1A through PA-1F respectively. PEAs containing non-polar thiol side chains (PA-1A, PA-1B, PA-1E), showed little change in solubility compared to PA-1, while PEAs with more polar side chains improved solubility in more polar solvents. PA-1F, functionalized with sodium-2-mercaptoethanesulfonate, became water-soluble. The introduction of pendant functional groups impacted the thermal behaviors of PEAs in a wide range. The PEAs were thermally stable up to 368 °C, with glass transition temperatures (T_g) measured between 117 to 152 °C. Moreover, to demonstrate the versatility of the PEAs, thermal reprocessable networks and polyurethanes were successfully fabricated by reacting with a bismaleimide (1,6-bis(maleimido)hexane, 1,6-BMH) and a diisocyanate (4,4'-diphenylmethane diisocyanate, 4,4'-MDI), respectively. This study paves the way for the facile synthesis of functional poly(ester amide)s with great potential in many fields.

Taste Masking of Promethazine Hydrochloride Using l-Arginine Polyamide-Based Nanocapsules

Promethazine hydrochloride (PMZ), a potent H1-histamine blocker widely used to prevent motion sickness, dizziness, nausea, and vomiting, has a bitter taste. In the present study, taste masked PMZ nanocapsules (NCs) were prepared using an interfacial polycondensation technique. A one-step approach was used to expedite the synthesis of NCs made from a biocompatible and biodegradable polyamide based on l-arginine. The produced NCs had an average particle size of 193.63 ± 39.1 nm and a zeta potential of −31.7 ± 1.25 mV, indicating their stability. The NCs were characterized using differential scanning calorimetric analysis and X-ray diffraction, as well as transmission electron microscopy that demonstrated the formation of the NCs and the incorporation of PMZ within the polymer. The in vitro release study of the PMZ-loaded NCs displayed a 0.91 ± 0.02% release of PMZ after 10 min using artificial saliva as the dissolution media, indicating excellent taste masked particles. The in vivo study using mice revealed that the amount of fluid consumed by the PMZ-NCs group was significantly higher than that consumed by the free PMZ group (p < 0.05). This study confirmed that NCs using polyamides based on l-arginine and interfacial polycondensation can serve as a good platform for the effective taste masking of bitter actives.

Recent Advances of Poly(ester amide)s-Based Biomaterials

Biodegradable and biocompatible biomaterials have offered much more opportunities from an engineering standpoint for treating diseases and maintaining health. Poly(ester amide)s (PEAs), as an outstanding family among such biomaterials, have risen overwhelmingly in the past decades. These synthetic polymers have easily and widely available raw materials and a diversity of synthetic approaches, which have attracted considerable attention. More importantly, combining the superiorities of polyamides and polyesters, PEAs have emerged with better functions. They could have improved biodegradability, biocompatibility, and cell-material interactions. The PEAs derived from α-amino acids even allow the introduction of pendant sites for further modification or functionalization. Meanwhile, it is gradually recognized that the chemical structures are closely related to the physiochemical and biological properties of PEAs so that their properties can be precisely controlled. PEAs therefore become significant materials in the biomedical fields. This review will attempt to summarize the recent progress in the development of PEAs with respect to the preparation materials and methods, structure-property relationships along with their latest biomedical accomplishments, especially for drug delivery and tissue engineering.

Novel Thymoquinone Nanoparticles Using Poly(ester amide) Based on L-Arginine-Targeting Pulmonary Drug Delivery

Thymoquinone (TQ), the main active constituent of Nigella sativa, has demonstrated broad-spectrum antimicrobial, antioxidant, and anti-inflammatory effects, which suggest its potential use in secondary infections caused by COVID-19. However, clinical deployment has been hindered due to its limited aqueous solubility and poor bioavailability. Therefore, a targeted delivery system to the lungs using nanotechnology is needed to overcome limitations encountered with TQ. In this project, a novel TQ-loaded poly(ester amide) based on L-arginine nanoparticles was prepared using the interfacial polycondensation method for a dry powder inhaler targeting delivery of TQ to the lungs. The nanoparticles were characterized by FTIR and NMR to confirm the structure. Transmission electron microscopy and Zetasizer results confirmed the particle diameter of 52 nm. The high-dose formulation showed the entrapment efficiency and loading capacity values of TQ to be 99.77% and 35.56%, respectively. An XRD study proved that TQ did not change its crystallinity, which was further confirmed by the DSC study. Optimized nanoparticles were evaluated for their in vitro aerodynamic performance, which demonstrated an effective delivery of 22.7–23.7% of the nominal dose into the lower parts of the lungs. The high drug-targeting potential and efficiency demonstrates the significant role of the TQ nanoparticles for potential application in COVID-19 and other respiratory conditions.

Progress in arginine-based gene delivery systems

Arginine based gene delivery systems with enhanced membrane penetration and lower cytotoxicity greatly enrich the gene vectors library and outline a new development direction of gene delivery.

High performance poly(urethane-co-amide) from CO2-based dicarbamate: an alternative to long chain polyamide

Due to its high strength, toughness, corrosion resistance and wear resistance, long chain polyamide (LCPA) has attracted broad interest. Nevertheless, its wide application in industrial fields is still being restricted because the starting material acquisition step involving diacid and diamine remains a major obstacle. Herein, we circumvent this obstacle by developing a novel polymer with similar properties by a green and efficient copolymerization process of carbon dioxide (CO₂)-based dicarbamate with diamide diol under vacuum conditions, named poly(urethane-co-amide) (PUA). The semi-crystalline PUAs with high number-weight-average molecular weights (M_n, up to 41.3 kDa) were readily obtained, and these new polymers show high thermal stability (above 300 °C). Thanks to its unique chain structure, the amide, urethane and urea groups can endow the polymer with a high density cross-linking network via hydrogen bonds and high crystallinity that can result in high strength, up to 54.0 MPa. The dynamic thermomechanical analysis (DMA) results suggest that the phase separation exists within the new polymers, endowing the PUAs with a toughness higher than that of long chain polyamides. Consequently, this work not only develops a useful new polymer like commercial polyamides with high performance as a long chain polyamide candidate, but also provides a new way of utilizating CO₂.

A novel high performance polymer like long carbon-chain nylon was synthesized via a green and efficient copolymerization from CO₂-based dicarbamate.

Arginine-based poly(ester amide) nanoparticle platform: From structure-property relationship to nucleic acid delivery

Many different types of polycations have been vigorously studied for nucleic acid delivery, but a systematical investigation of the structure-property relationships of polycations for nucleic acid delivery is still lacking. In this study, a new library of biodegradable and biocompatible arginine-based poly(ester amide) (Arg-PEA) biomaterials was designed and synthesized with a tunable structure for such a comprehensive structure-property research. Nanoparticle (NP) complexes were formed through the electrostatic interactions between the polycationic Arg-PEAs and anionic nucleic acids. The following structure effects of the Arg-PEAs on the transfection efficiency of nucleic acids were investigated: 1) the linker/spacer length (length effect and odd-even effect); 2) salt type of arginine; 3) the side chain; 4) chain stiffness; 5) molecular weight (MW). The data obtained revealed that a slight change in the Arg-PEA structure could finely tune its physicochemical property such as hydrophobicity, and this could subsequently affect the nanoparticle size and zeta potential, which, in turn, regulate the transfection efficiency and silencing outcomes. A further study of the Arg-PEA/CpG oligodeoxynucleotide NP complexes indicated that the polymer structure could precisily regulate the immune response of CpG, thus providing a new potential nano-immunotherapy strategy. The in vitro data have further confirmed that the Arg-PEA NPs showed a satisfactory delivery performance for a variety of nucleic acids. Therefore, the data from the current study provide comprehensive information about the Arg-PEA structure-transfection property relationship; the tunable property of the library of Arg-PEA biomaterials can be one of the promising candidates for nucleic acid delivery and other biomedical applications.

STATEMENT OF SIGNIFICANCE

Polycations have being intensive utilized for nucleic acid delivery. However, there has not been elucidated about the relationship between polycation's structure and the physicochemical properties/biological function. In this timely report, an arginine based poly(ester amide) (Arg-PEA) library was prepared with finely tunable structure to systematically investigate the structure-property relationships of polycations for nucleic acid delivery. The results revealed that slight change of Arg-PEA structure could finely tune the physicochemical property (such as hydrophobicity), which subsequently affect the size and zeta potential of Arg-PEA/nucleic acid nanoparticles(NPs), and finally regulate the resulting transfection or silencing outcomes. Further study of Arg-PEA/CpG NPs indicated that the polymer structure could precisely regulate immuno response of CpG, providing new potential nano-immunotherapy strategy. In vitro evaluations confirmed that the NPs showed satisfied delivery performance for a variety types of nucleic acids. Therefore, these studies provide comprehensive information of Arg-PEA structure-property relationship, and the tunable properties of Arg-PEAs make them promising candidates for nucleic acid delivery and other biomedical applications. Overall, we have shown enough significance and novelty in terms of nucleic acid delivery, biomaterials, pharmaceutical science and nanomedicine.

Folate-decorated arginine-based poly(ester urea urethane) nanoparticles as carriers for gambogic acid and effect on cancer cells

Gambogic acid (GA) exhibits a broad spectrum of anticancer activity and low chemotoxicity to normal tissues. However, poor aqueous solubility and sensitivity to hydrolysis make its pharmaceutical applications a challenge. Linear and branched Arg-based poly(ester urea urethane)s (Arg-PEUUs), folate (FA)-conjugated Arg PEUUs (FA-Arg-PEUUs), and their self-assembled nanoparticles (NPs) were designed, synthesized, and studied as the potential GA carriers for cancer treatment. The average diameters of linear or branched Arg-PEUU/FA-Arg-PEUU NPs were 98-267 nm. FA-Arg-PEUU NPs adhered onto and were internalized into HeLa and A549 cells, and showed no cytotoxicity. The GA loading efficiency in the NP carriers ranged from 40 to 98%, depending on the feed weight ratio of GA to Arg-PEUU and the Arg-PEUU polymer structure (i.e., linear vs. branched). The GA at 2 µg/mL concentration delivered by the FA-Arg-PEUU NP carriers had higher cytotoxicity and induced a higher apoptosis percentage against folate receptor (FR)-overexpressed HeLa or HCT116 than Arg-PEUU NPs. When compared to the free GA treatment, the GA loaded in the FA-Arg-PEUU NP carriers also led to significant loss of the mitochondrial membrane potential in a higher percentage of the cancer cell population and more DNA fragmentation. The GA loaded in FA-Arg-PEUU NP carriers at as low as 0.6 µg/mL GA concentration led to lower MMP-2 and MMP-9 activity of cancer cells compared to free GA, suggesting that GA-loaded Arg-PEUU NPs may have greater potential to reduce cancer cell invasion and metastasis than free GA. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 475-490, 2017.

Poly(ester amide)s: recent insights into synthesis, stability and biomedical applications

Recent progress in polyesteramides, which are important polymers that can combine the properties of polyesters and polyamides, is described with a focus on synthesis and their application as biomaterials.

A novel pseudo-protein-based biodegradable coating for magnesium substrates: in vitro corrosion phenomena and cytocompatibility

The goal of this study is to examine whether a member of the newly developed biodegradable pseudo-protein biomaterial family could provide a far better protection and performance than the popular hydrolytically degradable poly(glycolide-co-lactide) (PLGA) biomaterial on an experimental magnesium substrate as a model.

Development of an arginine-based cationic hydrogel platform: Synthesis, characterization and biomedical applications

A series of biodegradable and biocompatible cationic hybrid hydrogels was developed from water-soluble arginine-based unsaturated polymer (Arg-AG) and poly(ethylene glycol) diacrylate (PEG-DA) by a photocrosslinking method. The physicochemical, mechanical and biological properties of these hydrogels were intensively examined. The hydrogels were characterized in terms of equilibrium swelling ratio (Qeq), compression modulus and interior morphology. The effects of the chemical structure of the two Arg-AG precursors and the feed ratio of these precursors on the properties of resulting hybrid hydrogels were investigated. The crosslinking density and mechanical strength of the hybrid hydrogels increased with an increase in allylglycine (AG) content in the Arg-AG precursor, as the gelation efficiency (Gf) increased from 80% to 90%, but the swelling and pore size of the hybrid hydrogels decreased as the equilibrium swelling weight (Qeq) decreased from 1890% to 1330% and the pore size from 28 to 22 μm. The short-term in vitro biodegradation properties of hydrogels were investigated as a function of Arg-AG chemical structures and enzymes. Hybrid hydrogels showed faster biodegradation in an enzyme solution than in a phosphate-buffered saline solution. Bovine serum albumin and insulin release profiles indicated that this cationic hydrogel system could significantly improve the sustained release of the negatively charged proteins. The cellular response of the hybrid hydrogels was preliminarily evaluated by cell attachment, encapsulation and proliferation tests using live-dead and MTT assay. The results showed that the hybrid hydrogels supported cell attachment well and were nontoxic to the cells.

Arginine-based polyester amide/polysaccharide hydrogels and their biological response

An advanced family of biodegradable cationic hybrid hydrogels was designed and fabricated from two precursors via a UV photocrosslinking in an aqueous medium: unsaturated arginine (Arg)-based functional poly(ester amide) (Arg-UPEA) and glycidyl methacrylate chitosan (GMA-chitosan). These Arg-UPEA/GMA-chitosan hybrid hydrogels were characterized in terms of their chemical structure, equilibrium swelling ratio (Qeq), compressive modulus, interior morphology and biodegradation properties. Lysozyme effectively accelerated the biodegradation of the hybrid hydrogels. The mixture of both precursors in an aqueous solution showed near non-cytotoxicity toward porcine aortic valve smooth muscle cells at total concentrations up to 6mgml(-1). The live/dead assay data showed that 3T3 fibroblasts were able to attach and grow on the hybrid hydrogel and pure GMA-chitosan hydrogel well. Arg-UPEA/GMA-chitosan hybrid hydrogels activated both TNF-α and NO production by RAW 264.7 macrophages, and the arginase activity was also elevated. The integration of the biodegradable Arg-UPEA into the GMA-chitosan can provide advantages in terms of elevated and balanced NO production and arginase activity that free Arg supplement could not achieve. The hybrid hydrogels may have potential application as a wound healing accelerator.

Development of a biocompatible and biodegradable hybrid hydrogel platform for sustained release of ionic drugs

We have developed and characterized a new hydrogel platform for ionic drug delivery, incorporating cationic, anionic, and temperature responsive precursors. In vitro biological assays show that these polymers have excellent biocompatibility, controllable biodegradability, and sustained ionic drug release capability.

Block copolymer of poly(ester amide) and polyesters: synthesis, characterization, and in vitro cellular response

In order to expand the properties and applications of aliphatic absorbable polyesters, a new biodegradable block copolymer family, poly(ester amide)-b-poly(ε-caprolactone) (PEA-b-PCL), was synthesized and characterized. These copolymers were synthesized by first preparing l-phenylalanine-based poly(ester amide) macroinitiators (Phe-PEAs) with free amine end groups via a solution polycondensation. The amine-terminated Phe-PEA macroinitiators were then used to initiate the ring-opening polymerization of ε-caprolactone monomer to prepare the PEA-b-PCL copolymers. The molecular weight (MW) of PEA-b-PCLs can be well controlled by adjusting the Phe-PEA MW and weight ratio of ε-caprolactone to Phe-PEA, and ranged from 7 to 50kgmol(-1). The copolymers' structure and properties were characterized by various physicochemical methods, such as nuclear magnetic resonance, gel permeation chromatography and solubility testing. The in vitro enzymatic biodegradation tests were performed to evaluate the biodegradation rate of the copolymers. The results showed that the introduction of Phe-PEA to PCL did not significantly change the degradation rate of PCL. Biological studies were conducted to assess the polymer's biological properties, like supporting the cell attachment and proliferation, and inflammation response. The results showed that the bovine aortic endothelial cells had very good attachment and proliferation performance on PEA-b-PCL coating surface. TNF-α release profiles showed that PEA-b-PCL exhibited a muted J774 macrophage inflammatory response.

α-Amino acid containing degradable polymers as functional biomaterials: rational design, synthetic pathway, and biomedical applications

Currently, biomedical engineering is rapidly expanding, especially in the areas of drug delivery, gene transfer, tissue engineering, and regenerative medicine. A prerequisite for further development is the design and synthesis of novel multifunctional biomaterials that are biocompatible and biologically active, are biodegradable with a controlled degradation rate, and have tunable mechanical properties. In the past decades, different types of α-amino acid-containing degradable polymers have been actively developed with the aim to obtain biomimicking functional biomaterials. The use of α-amino acids as building units for degradable polymers may offer several advantages: (i) imparting chemical functionality, such as hydroxyl, amine, carboxyl, and thiol groups, which not only results in improved hydrophilicity and possible interactions with proteins and genes, but also facilitates further modification with bioactive molecules (e.g., drugs or biological cues); (ii) possibly improving materials biological properties, including cell-materials interactions (e.g., cell adhesion, migration) and degradability; (iii) enhancing thermal and mechanical properties; and (iv) providing metabolizable building units/blocks. In this paper, recent developments in the field of α-amino acid-containing degradable polymers are reviewed. First, synthetic approaches to prepare α-amino acid-containing degradable polymers will be discussed. Subsequently, the biomedical applications of these polymers in areas such as drug delivery, gene delivery and tissue engineering will be reviewed. Finally, the future perspectives of α-amino acid-containing degradable polymers will be evaluated.

Synthesis and characterization of ionic charged water soluble arginine-based poly(ester amide)

A family of water soluble and positively charged L-arginine based poly(ester amide)s (Arg-PEAs) was synthesized and characterized. These biodegradable polymers consist of three nontoxic building blocks: L-arginine, diols, and dicarboxylic acids. The Arg-PEAs were prepared by solution polycondensation reaction of tetra-p-toluenesulfonic acids salts of bis-(L-arginine) α, ω-alkylene diesters and di-p-nitrophenyl esters of dicarboxylic acids. Optimal conditions of the monomers and polymers synthesis were investigated, and the monomers and Arg-PEAs were chemically characterized. Arg-PEAs were found to have good solubility in water and many other polar solvents. Structure-function relationship of the Arg-PEAs revealed that changing the number of methylene groups in the diol or/and diacid segment could finely tune the hydrophobic and cationic properties of the Arg-PEAs. MTT assay showed that all the prepared Arg-PEAs were non-toxic to the cell lines even at very large doses. Arg-PEAs with double bond functionality could be photo-crosslinked with polyethylene glycol diacrylate to form cationic hybrid hydrogels.