Non-Isothermal Crystallization Kinetics of PBSu/Biochar Composites Studied by Isoconversional and Model Fitting Methods

Non-isothermal crystallization of Poly(butylene succinate) (PBSu)/biochar composites was studied at various constant cooling rates using differential scanning calorimetry. The analysis of the kinetics data revealed that the overall crystallization rate and activation energy of the PBSu polymer were significantly influenced by the addition of biochar. Specifically, the PBSu/5% biochar composite with a higher filler content was more effective as a nucleation agent in the polymer matrix, as indicated by the nucleation activity (ψ) value of 0.45. The activation energy of the PBSu/5% biochar composite was found to be higher than that of the other compositions, while the nucleation activity of the PBSu/biochar composites decreased as the biochar content increased. The Avrami equation, which is commonly used to describe the kinetics of crystallization, was found to be limited in accurately predicting the non-isothermal crystallization behavior of PBSu and PBSu/biochar composites. Although the Nakamura/Hoffman-Lauritzen model performed well overall, it may not have accurately predicted the crystallization rate at the end of the process due to the possibility of secondary crystallization. Finally, the combination of the Šesták-Berggren model with the Hoffman-Lauritzen theory was found to accurately predict the crystallization behavior of the PBSu/biochar composites, indicating a complex crystallization mechanism involving both nucleation and growth. The K_g parameter of neat PBSu was found to be 0.7099 K², while the melting temperature and glass transition temperature of neat PBSu were found to be 114.91 °C and 35 °C, respectively, very close to the measured values. The Avrami nucleation dimension n was found to 2.65 for PBSu/5% biochar composite indicating that the crystallization process is complex in the composites.

Effect of Hydroxyapatite Nanoparticles on the Degradability of Random Poly(butylene terephthalate-co-aliphatic dicarboxylate)s Having a High Content of Terephthalic Units

Copolyesters derived from 1,4-butanediol and constituted also of aliphatic and aromatic dicarboxylate units in a molar ratio of 3:7 were synthesized by a two-step polycondensation procedure. Succinic, adipic, and sebacic acids were specifically selected as the aliphatic component whereas terephthalic acid was chosen as the aromatic moiety. The second synthesis step was a thermal transesterification between the corresponding homopolymers, always attaining a random distribution as verified by NMR spectroscopy. Hybrid polymer composites containing 2.5 wt % of hydroxyapatite (HAp) were also prepared by in situ polymerization. Hydroxyl groups on the nanoparticle surface allowed the grafting of polymer chains in such a way that composites were mostly insoluble in the typical solvents of the parent copolyesters. HAp had some influence on crystallization from the melt, thermal stability, and mechanical properties. HAp also improved the biocompatibility of samples due to the presence of Ca²⁺ cations and the damping effect of phosphate groups. Interestingly, HAp resulted in a significant increase in the hydrophilicity of samples, which considerably affected both enzymatic and hydrolytic degradability. Slight differences were also found in the function of the dicarboxylic component, as the lowest degradation rates was found for the sample constituted of the most hydrophobic sebacic acid units.

Synthesis, properties and applications of biodegradable polymers derived from diols and dicarboxylic acids: from polyesters to poly(ester amide)s

Poly(alkylene dicarboxylate)s constitute a family of biodegradable polymers with increasing interest for both commodity and speciality applications. Most of these polymers can be prepared from biobased diols and dicarboxylic acids such as 1,4-butanediol, succinic acid and carbohydrates. This review provides a current status report concerning synthesis, biodegradation and applications of a series of polymers that cover a wide range of properties, namely, materials from elastomeric to rigid characteristics that are suitable for applications such as hydrogels, soft tissue engineering, drug delivery systems and liquid crystals. Finally, the incorporation of aromatic units and α-amino acids is considered since stiffness of molecular chains and intermolecular interactions can be drastically changed. In fact, poly(ester amide)s derived from naturally occurring amino acids offer great possibilities as biodegradable materials for biomedical applications which are also extensively discussed.