Self-assembling systems comprising intrinsically disordered protein polymers like elastin-like recombinamers

3D tubular constructs based on natural polysaccharides and recombinant polypeptide synergistic blends as potential candidates for blood vessel solutions

The development of versatile tubular structures is critical for tissue engineering (TE) applications where vascularization is necessary. This study investigates the fabrication of tubular shaped biomaterials focused on chitosan (CHT) combined with alginate (ALG) and acemannan (ACE), known for their synergistic properties, including physical stability, antibacterial activity, and healing promotion. Translating this CHT/ACE/ALG blend into 3D tubular architectures via the freeze-drying technology resulted in flexible tubes with dimensional stability, and well-defined hollow interiors. Testing these tubes for their water uptake capacity and stability indicated a substantial water absorption (about 20-fold of their dry mass), and they maintained structural integrity under physiological conditions over seven days. Structural analyses using SEM and Micro-CT revealed uniform morphology and porosity, crucial for nutrient and oxygen diffusion. Elastin-like recombinamers (ELRs) containing the QK peptide - a peptide sequence that mimics the vascular endothelial growth factor (VEGF) - were incorporated into the tubular structures, to enhance the bioactivity and the mechanical behavior of the constructs. This modification led to a reduction in porosity but without affecting endothelial cells viability, with pore size ≥100 μm was maintained. The sustained release of bioactive compounds, including ACE and ELRs, was shown to improve endothelial cells viability. Our approach thus opens new possibilities for the design of tubular structures with customizable length, diameter, stability, and bioactivity, particularly in cardiovascular applications.

Spontaneous Self-Organized Order Emerging From Intrinsically Disordered Protein Polymers

Intrinsically disordered proteins (IDPs) are proteins that, despite lacking a defined 3D structure, are capable of adopting dynamic conformations. This structural adaptability allows them to play not only essential roles in crucial cellular processes, such as subcellular organization or transcriptional control, but also in coordinating the assembly of macromolecules during different stages of development. Thus, in order to artificially replicate the complex processes of morphogenesis and their dynamics, it is crucial to have materials that recapitulate the structural plasticity of IDPs. In this regard, intrinsically disordered protein polymers (IDPPs) emerge as promising materials for engineering synthetic condensates and creating hierarchically self-assembled materials. IDPPs exhibit remarkable properties for their use in biofabrication, such as functional versatility, tunable sequence order-disorder, and the ability to undergo liquid-liquid phase separation (LLPS). Recent research has focused on harnessing the intrinsic disorder of IDPPs to design complex protein architectures with tailored properties. Taking advantage of their stimuli-responsiveness and degree of disorder, researchers have developed innovative strategies to control the self-assembly of IDPPs, resulting in the creation of hierarchically organized structures and intricate morphologies. In this review, we aim to provide an overview of the latest advances in the design and application of IDPP-based materials, shedding light on the fundamental principles that control their supramolecular assembly, and discussing their application in the biomedical and nanobiotechnological fields.

Exploring LCST- and UCST-like Behavior of Branched Molecules Bearing Repeat Units of Elastin-like Peptides as Side Components

Elastin-like peptides (ELPs) exhibit lower critical solution temperature (LCST)-type behavior, being soluble at low temperatures and insoluble at high temperatures. While the properties of linear, long-chain ELPs are well-studied, short-chain ELPs, especially those with branched architectures, have been less explored. Herein, to obtain further insights into multimeric short ELPs, we investigated the temperature-responsive properties of branched molecules composed of a repeating pentapeptide unit of short ELPs, Phe-Pro-Gly-Val-Gly, as side components and oligo(Glu) as a backbone structure. In turbidimetry experiments, the branched ELPs showed LCST-like behavior similar to conventional ELPs and upper critical solution temperature (UCST)-like behavior, which are rarely observed in ELPs. In addition, the morphological aspects and mechanisms underlying the temperature-responsiveness were investigated. We observed that spherical aggregates formed, and the branched ELPs underwent structural changes through the self-assembly process. This study demonstrates the unique temperature-responsiveness of branched short ELPs, providing new insights into the future development and use of ELPs with tailored properties.

Genetically Fusing Order-Promoting and Thermoresponsive Building Blocks to Design Hybrid Biomaterials

The unique biophysical and biochemical properties of intrinsically disordered proteins (IDPs) and their recombinant derivatives, intrinsically disordered protein polymers (IDPPs) offer opportunities for producing multistimuli-responsive materials; their sequence-encoded disorder and tendency for phase separation facilitate the development of multifunctional materials. This review highlights the strategies for enhancing the structural diversity of elastin-like polypeptides (ELPs) and resilin-like polypeptides (RLPs), and their self-assembled structures via genetic fusion to ordered motifs such as helical or beta sheet domains. In particular, this review describes approaches that harness the synergistic interplay between order-promoting and thermoresponsive building blocks to design hybrid biomaterials, resulting in well-structured, stimuli-responsive supramolecular materials ordered on the nanoscale.

Advanced Dressings for Chronic Wound Management

Wound healing, particularly for chronic wounds, presents a considerable difficulty due to differences in biochemical and cellular processes that occur in different types of wounds. Recent technological breakthroughs have notably advanced the understanding of diagnostic and therapeutic approaches to wound healing. The evolution in wound care has seen a transition from traditional textile dressings to a variety of advanced alternatives, including self-healing hydrogels, hydrofibers, foams, hydrocolloids, environment responsive dressings, growth factor-based therapy, bioengineered skin substitutes, and stem cell and gene therapy. Technological advancements, such as 3D printing and electronic skin (e-skin) therapy, contribute to the customization of wound healing. Despite these advancements, effectively managing chronic wounds remains challenging. This necessitates the development of treatments that consider performance, risk-benefit balance, and cost-effectiveness. This review discusses innovative strategies for the healing of chronic wounds. Incorporating biomarkers into advanced dressings, coupled with corresponding biosensors and drug delivery formulations, enables the theranostic approach to the treatment of chronic wounds. Furthermore, integrating advanced dressings with power sources and user interfaces like near-field communication, radio frequency identification, and Bluetooth enhances real-time monitoring and on-demand drug delivery. It also provides a thorough evaluation of the advantages, patient compliance, costs, and durability of advanced dressings, emphasizing smart formulations and their preparation methods.

"In-situ" formation of elastin-like recombinamer hydrogels with tunable viscoelasticity through efficient one-pot process

Despite the remarkable progress in the generation of recombinant elastin-like (ELR) hydrogels, further improvements are still required to enhance and control their viscoelasticity, as well as limit the use of expensive chemical reagents, time-consuming processes and several purification steps. To alleviate this issue, the reactivity of carboxylic groups from glutamic (E) acid distributed along the hydrophilic block of an amphiphilic ELR (coded as E50I60) with amine groups has been studied through a one-pot amidation reaction in aqueous solutions, for the first time. By means of this approach, immediate conjugation of E50I60 with molecules containing amine groups has been performed with a high yield, as demonstrated by the 1H NMR and MALDI-TOF spectroscopies. This has resulted in the preparation of viscoelastic irreversible hydrogels through the "in-situ" cross-linking of E50I60 with another ELR (coded as VKV24) containing amine groups from lysines (K). The rheology analysis demonstrated that the gelation process takes place following a dual mechanism dependent on the ELR concentration: physical cross-linking of I60 block through the hydrophobic interactions, and covalent cross-linking of E50I60 with VKV24 through the amidation reaction. While the chemical network formed between the hydrophilic E50 block and VKV24 ELR preserves the elasticity of ELR hydrogels, the self-assembly of the I60 block through the hydrophobic interactions provides a tunable physical network. The presented investigation serves as a basis for generating ELR hydrogels with tunable viscoelastic properties promising for tissue regeneration, through an ''in-situ", rapid, scalable, economically and feasible one-pot method.

Enhancement of Aggregate Formation Through Aromatic Compound Adsorption in Elastin-like Peptide (FPGVG)5 Analogs

Elastin-like peptides (ELPs) exhibit temperature-dependent reversible self-assembly. Repetitive sequences derived from elastin, such as Val-Pro-Gly-Val-Gly (VPGVG), are essential for the self-assembly of ELPs. Previously, we developed (FPGVG)5 (F5), in which the first valine residue in the VPGVG sequence was replaced with phenylalanine, which showed strong self-aggregation ability. This suggests that interactions through the aromatic amino acid residues of ELPs could play an important role in self-assembly. In this study, we investigated the thermoresponsive behavior of F5 analogs in the presence of aromatic compounds. Turbidimetry, spectroscopy, and fluorescence measurements demonstrated that aromatic compounds interacted with F5 analogs below the transition temperature and enhanced the self-assembly ability of ELPs by stabilizing amyloid-like structures. Furthermore, quantitative high-performance liquid chromatography analyses showed that the F5 analogs could adsorb and remove hydrophobic aromatic compounds from aqueous solutions during aggregate formation. These results suggested that the F5 analogs can be applicable as scavengers of aromatic compounds.

Determining the Sequence Dependency of Self-Assembly of Elastin-Like Peptides Using Short Peptide Analogues with Shuffled Repetitive Sequences

Synthetic elastin-like peptides (ELPs) that possess characteristic tropoelastin-derived hydrophobic repetitive sequences, such as (VPGVG)n, exhibit thermoresponsive reversible self-assembly. Although their thermoresponsive properties have been well-studied, the sequence-dependent and structural requirements for self-assembly remain ambiguous. In particular, it is still unclear whether the amino acid sequences derived from tropoelastin are necessary for self-assembly. In this study, 11 sequence-shuffled ELP analogues based on (FPGVG)5, which is a previously developed short ELP (sELP), were designed to elucidate the sequence-dependent and structural requirements for their self-assembly. Among them, eight shuffled peptides exhibited self-assembling properties, whereas the other three peptides were difficult to dissolve in water. Structural analyses revealed that the structural characteristics of the three insoluble peptides were different from those of their thermoresponsive analogues. Furthermore, the secondary structures of the peptide analogues possessing the self-assembly abilities were different from each other. These results suggest that the potential for self-assembly and water solubility of sELPs depend on the primary structure in each repeated unit. Moreover, several shuffled analogues exhibited more potent self-assembling properties than the original (FPGVG)5, indicating that shorter ELPs can be obtained using their novel motifs as repetitive units. We also observed that the presence of Pro-Gly sequence in the repeating units was advantageous in terms of peptide solubility. Although further analysis will be necessary to elucidate the molecular mechanism underlying the self-assembly of these sELPs, this study provides insights into the relationship between the amino acid sequence and the self-assembling ability of the peptides for developing new sELPs for various applications.

Tissue engineering modalities in skeletal muscles: focus on angiogenesis and immunomodulation properties

Muscular diseases and injuries are challenging issues in human medicine, resulting in physical disability. The advent of tissue engineering approaches has paved the way for the restoration and regeneration of injured muscle tissues along with available conventional therapies. Despite recent advances in the fabrication, synthesis, and application of hydrogels in terms of muscle tissue, there is a long way to find appropriate hydrogel types in patients with congenital and/or acquired musculoskeletal injuries. Regarding specific muscular tissue microenvironments, the applied hydrogels should provide a suitable platform for the activation of endogenous reparative mechanisms and concurrently deliver transplanting cells and therapeutics into the injured sites. Here, we aimed to highlight recent advances in muscle tissue engineering with a focus on recent strategies related to the regulation of vascularization and immune system response at the site of injury.

Flexible customization of the self-assembling abilities of short elastin-like peptide Fn analogs by substituting N-terminal amino acids

Elastin-like peptides (ELPs) are thermoresponsive biopolymers inspired by the characteristic repetitive sequences of natural elastin. As ELPs exhibit temperature-dependent reversible self-assembly, they are expected to be biocompatible thermoresponsive materials for drug delivery carriers. One of the most widely studied ELPs in this field is the repetitive pentapeptide, (VPGXG)_n . We previously reported that phenylalanine-containing ELP (Fn) analogs, in which the former Val residue of the repetitive sequence (VPGVG)_n is replaced by Phe, show coacervation with a short chain length (n = 5). Owing to their short sequences, Fn analogs are easily modified in amino acid sequences via simple chemical synthesis, and are useful for investigating the relationship between peptide sequences and temperature responsiveness. In this study, we developed Fn analogs by replacing Phe residue(s) with other amino acids or introducing another amino acid at the N-terminus. The temperature responsiveness of the Fn analogs changed drastically with the substitution of a single Phe residue, suggesting that aromatic amino acids play an important role in their self-assembly. In addition, the self-assembling ability of Fn was enhanced by increasing the bulkiness of the N-terminal amino acids. Therefore, the N-terminal residue was considered to be important for hydrophobicity-induced intermolecular interactions between the peptides during coacervation.