Defect-enhanced F- ion conductivity in layer-structured nanocrystalline BaSnF4 prepared by high-energy ball milling combined with soft annealing

Lithium ion transport in micro- and nanocrystalline lithium sulphide Li2S

Ion dynamics in binary Li-bearing compounds such as LiF, Li2O and Li2S is rather poor. These compounds do, however, form as decomposition products at the interface between the electrolyte and the electrode materials in lithium-based batteries. They are expected to severely influence the charge transport across this electrode-electrolyte interface and, thus, the overall performance of such systems. Yet, ion dynamics in the nanostructured forms of these binary compounds has scarcely been investigated. Here, we prepared bulk nanostructured Li2S through high-energy ball milling and studied its temperature-dependent ionic conductivity by means of broadband impedance spectroscopy. It turned out that, compared to the unmilled form, Li+ ion conductivity in ball-milled Li2S increased by approximately 3 orders or magnitude. This striking increase is accompanied by a decrease of the average activation energy from ca. 0.9 eV to approximately 0.7 eV. Structural disorder, stress and local distortions are assumed to be responsible for this clear change in macroscopic transport parameters. Fast ion dynamics in or near the interfacial space charge zones might contribute to enhanced dynamics, too. We conclude that Li ion transport in interfacial Li2S, if present in a disordered nanostructured form in lithium-ion batteries, is much faster than originally thought for its ordered counterpart.

A Fluoride-Ion-Conducting Solid Electrolyte with Both High Conductivity and Excellent Electrochemical Stability

Solid-state fluoride-ion batteries (FIBs) circumvent multiple formidable bottlenecks of lithium-ion batteries, but their overall performance remains inferior due to the absence of appropriate solid electrolytes. Presently the conductivity of most solid electrolytes for FIBs is too low to enable room-temperature cycling, while the few sufficiently conductive ones only allow for very low discharge voltages because of the narrow electrochemical stability window (ESW). Here, high room-temperature conductivity and a decent ESW are simultaneously achieved by designing a solid electrolyte CsPb_0.9 K_0.1 F_2.9 . Its room-temperature conductivity is 1.23 × 10^-3  S cm^-1 , comparable to the most conductive system reported so far (PbSnF₄ , 5.44 × 10^-4 -1.6 × 10^-3  S cm^-1 ), but the ESW is several times broader. With these appealing characteristics simultaneously achieved in the solid electrolyte, a cell with much higher voltages than other room-temperature-operable solid-state FIBs in literature is successfully constructed, and stably cycled at 25 °C for 4581 h without considerable capacity fade.

Fuzzy logic: about the origins of fast ion dynamics in crystalline solids

Nuclear magnetic resonance offers a wide range of tools to analyse ionic jump processes in crystalline and amorphous solids. Both high-resolution and time-domain [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text] NMR helps throw light on the origins of rapid self-diffusion in materials being relevant for energy storage. It is well accepted that [Formula: see text] ions are subjected to extremely slow exchange processes in compounds with strong site preferences. The loss of this site preference may lead to rapid cation diffusion, as is also well known for glassy materials. Further examples that benefit from this effect include, e.g. cation-mixed, high-entropy fluorides [Formula: see text], Li-bearing garnets ([Formula: see text]) and thiophosphates such as [Formula: see text]. In non-equilibrium phases site disorder, polyhedra distortions, strain and the various types of defects will affect both the activation energy and the corresponding attempt frequencies. Whereas in [Formula: see text] ([Formula: see text]) cation mixing influences F anion dynamics, in [Formula: see text] ([Formula: see text]) the potential landscape can be manipulated by anion site disorder. On the other hand, in the mixed conductor [Formula: see text] cation-cation repulsions immediately lead to a boost in [Formula: see text] diffusivity at the early stages of chemical lithiation. Finally, rapid diffusion is also expected for materials that are able to guide the ions along (macroscopic) pathways with confined (or low-dimensional) dimensions, as is the case in layer-structured [Formula: see text] or [Formula: see text]. Diffusion on fractal systems complements this type of diffusion. This article is part of the Theo Murphy meeting issue 'Understanding fast-ion conduction in solid electrolytes'.

F anion transport in nanocrystalline SmF3 and in mechanosynthesized, vacancy-rich Sm1—x BaxF3—x

Nanostructured materials can show considerably different properties as compared to their coarse-grained counterparts. Especially prepared by high-energy ball milling they are to be characterized by a large fraction of point defects in the bulk and structurally disordered interfacial regions. Here, we explored how the overall conductivity of SmF3 can be enhanced by mechanical treatment and to which degree aliovalent substitution is able to further enhance anion transport. For this purpose nanocrystalline (hexagonal) SmF3 was prepared by high-energy ball milling; mechanosynthesis helped us to replace Sm3+ in SmF3 by Ba2+ and to create vacancies in the F anion sublattice. We observed a remarkable increase in total (direct current) conductivity when going from nano-SmF3 to Sm1−x Ba x F3−x for x = 0.1. Electrical modulus spectroscopy was used to further characterize the corresponding increase in electrical relaxation frequencies.

On the underestimated influence of synthetic conditions in solid ionic conductors

The development of high-performance inorganic solid electrolytes is central to achieving high-energy- density solid-state batteries. Whereas these solid-state materials are often prepared via classic solid-state syntheses, recent efforts in the community have shown that mechanochemical reactions, solution syntheses, microwave syntheses, and various post-synthetic heat treatment routines can drastically affect the structure and microstructure, and with it, the transport properties of the materials. On the one hand, these are important considerations for the upscaling of a materials processing route for industrial applications and industrial production. On the other hand, it shows that the influence of the different syntheses on the materials' properties is neither well understood fundamentally nor broadly internalized well. Here we aim to review the recent efforts on understanding the influence of the synthetic procedure on the synthesis - (micro)structure - transport correlations in superionic conductors. Our aim is to provide the field of solid-state research a direction for future efforts to better understand current materials properties based on synthetic routes, rather than having an overly simplistic idea of any given composition having an intrinsic conductivity. We hope this review will shed light on the underestimated influence of synthesis on the transport properties of solid electrolytes toward the design of syntheses of future solid electrolytes and help guide industrial efforts of known materials.

Synthesis of Fast Fluoride-Ion-Conductive Fluorite-Type Ba1- xSb xF2+ x (0.1 ≤ x ≤ 0.4): A Potential Solid Electrolyte for Fluoride-Ion Batteries

Toward the development of high-performance solid electrolytes for fluoride-ion batteries, fluorite-type nanostructured solid solutions of Ba_{1- x}Sb _xF_{2+ x} ( x ≤ 0.4) were synthesized by high-energy ball-milling method. Substitution of divalent Ba²⁺ by trivalent Sb³⁺ leads to an increase in interstitial fluoride-ion concentration, which enhances the ionic conductivity of the Ba_{1- x}Sb _xF_{2+ x} (0.1 ≤ x ≤ 0.4) system. Total ionic conductivities of 4.4 × 10^-4 and 3.9 × 10^-4 S cm^-1 were obtained for Ba_0.7Sb_0.3F_2.3 and Ba_0.6Sb_0.4F_2.4 compositions at 160 °C, respectively. In comparison to isostructural Ba_0.3La_0.7F_2.3, the ionic conductivity of Ba_0.7Sb_0.3F_2.3 is significantly higher, which is attributed to the presence of an electron lone pair on Sb³⁺. Introduction of such lone pairs seems to increase fluoride-ion mobility in solid solutions. In addition, Ba_0.7Sb_0.3F_2.3 was tested as a cathode material against Ce and Zn anode using La_0.9Ba_0.1F_2.9 as the electrolyte. Ba_0.3Sb_0.7F_2.3/La_0.9Ba_0.1F_2.9/Ce cell showed high discharge and charge capacities of 301 and 170 mA h g^-1, respectively, in the first cycle at 150 °C.

Mismatch in cation size causes rapid anion dynamics in solid electrolytes: the role of the Arrhenius pre-factor

Mixed (Ba,Ca)F₂ reveals highly correlated F anion diffusion in disordered potentials landscapes.

Structure and ion dynamics of mechanosynthesized oxides and fluorides

In many cases, limitations in conventional synthesis routes hamper the accessibility to materials with properties that have been predicted by theory. For instance, metastable compounds with local non-equilibrium structures can hardly be accessed by solid-state preparation techniques often requiring high synthesis temperatures. Also other ways of preparation lead to the thermodynamically stable rather than metastable products. Fortunately, such hurdles can be overcome by mechanochemical synthesis. Mechanical treatment of two or three starting materials in high-energy ball mills enables the synthesis of not only new, metastable compounds but also of nanocrystalline materials with unusual or enhanced properties such as ion transport. In this short review we report about local structures and ion transport of oxides and fluorides mechanochemically prepared by high-energy ball-milling.

Mechanochemically synthesized fluorides: local structures and ion transport

The performance of new sensors or advanced electrochemical energy storage devices strongly depends on the active materials chosen to realize such systems. In particular, their morphology may greatly influence their overall macroscopic properties. Frequently, limitations in classical ways of chemical preparation routes hamper the development of materials with tailored properties. Fortunately, such hurdles can be overcome by mechanochemical synthesis. The versatility of mechanosynthesis allows the provision of compounds that are not available through common synthesis routes. The mechanical treatment of two or three starting materials in high-energy ball mills enables the synthesis not only of new compounds but also of nanocrystalline materials with unusual properties such as enhanced ion dynamics. Fast ion transport is of crucial importance in electrochemical energy storage. It is worth noting that mechanosynthesis also provides access to metastable phases that cannot be synthesized by conventional solid state synthesis. Ceramic synthesis routes often yield the thermally, i.e., thermodynamically, stable products rather than metastable compounds. In this perspective we report the mechanochemical synthesis of nanocrystalline fluorine ion conductors that serve as model substances to understand the relationship between local structures and ion dynamics. While ion transport properties were complementarily probed via conductivity spectroscopy and nuclear magnetic relaxation, local structures of the phases prepared were investigated by high-resolution (19)F NMR spectroscopy carried out by fast magic angle spinning. The combination of nuclear and non-nuclear techniques also helped us to shed light on the mechanisms controlling mechanochemical reactions in general.