Extraction efficiency and implications for absolute quantitation of propranolol in mouse brain, liver and kidney tissue sections using droplet-based liquid microjunction surface sampling high-performance liquid chromatography/electrospray ionization tandem mass spectrometry

Surface sampling capillary electrophoresis-mass spectrometry for a direct chemical characterization of tissue and blood samples

Capillary electrophoresis (CE) is a powerful separation tool for non-targeted analysis of chemically complex samples, such as blood, urine, and tissue. However, traditionally CE requires samples in solution for analysis, which limits information on analyte distribution and heterogeneity in tissue. The recent development of surface sampling CE-mass spectrometry (SS-CE-MS) brings these advantages of CE to solid samples and enables chemical mapping directly from the tissue surface without laborious sample preparation. Here, we describe developments of SS-CE-MS to increase reproducibility and stability for metabolite, lipid, and protein extraction from tissue sections and dried blood spots. Additionally, we report the first electrokinetic sequential sample injection for high throughput analysis. We foresee that the wide molecular coverage from a distinct tissue region in combination with higher throughput will provide novel information on biological function and dysfunction.

A review on quantitation-related factors and quantitation strategies in mass spectrometry imaging of small biomolecules

Accurate quantitative information of the analytes in mass spectrometry imaging (MSI) is fundamental for determining the accurate spatial distribution, which can provide additional insight into the living processes, disease progression or the pharmacokinetic-pharmacodynamic mechanisms. However, performing a quantitative analysis in MSI is still challenging. This review focuses on the quantitation-related factors and recent advances in the strategies of quantitative MSI (q-MSI) of small molecules. The main quantitation-related factors are discussed according to the new investigations in recent years, including the regionally varied extraction efficiencies and ionization efficiencies, signal-concentration regression functions, and the repeatability of surface sampling/ionization methods. Newly developed quantitation strategies in MSI based on aforementioned factors are introduced, including new techniques in standard curve calibration with normalization to an internal standard, kinetic calibration, and chemometric methods. Different strategies for validating q-MSI methods are discussed. Finally, the future perspectives to q-MSI are proposed.

Quantitative Mass Spectrometry Imaging with Liquid Microjunction Surface Sampling

Mass spectrometry imaging (MSI) could provide chemical spatial distribution within a diverse range of samples, but absolute quantitation with those techniques is still challenging. Recent years, ambient liquid extraction-based MSI techniques, such as liquid microjunction surface sampling (LMJSS), have been largely developed and were found to be favorable to quantitation by directly doping standards in the extraction solvent. Here, we describe the detailed experimental protocols and the data processing methods for quantitative MSI with LMJSS. The new methods could have absolute quantitative MSI of both endogenous lipids and small metabolites from tissue samples.

Rapid and sensitive analysis of trace β-blockers by magnetic solid-phase extraction coupled with fourier transform ion cyclotron resonance mass spectrometry

A rapid and sensitive method for analyzing trace β-blockers in complex biological samples, which involved magnetic solid-phase extraction (MSPE) coupled with Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS), was developed. Novel nanosilver-functionalized magnetic nanoparticles with an interlayer of poly(3,4-dihydroxyphenylalanine) (polyDOPA@Ag-MNPs) were synthesized and used as MSPE adsorbents to extract trace β-blockers from biological samples. After extraction, the analytes loaded on the polyDOPA@Ag-MNPs were desorbed using an organic solvent and analyzed by FTICR-MS. The method was rapid and sensitive, with a total detection procedure of less than 10 min as well as limits of detection and quantification in the ranges of 3.5–6.8 pg/mL and 11.7–22.8 pg/mL, respectively. The accuracy of the method was also desirable, with recoveries ranging from 80.9% to 91.0% following the detection of analytes in human blood samples. All the experimental results demonstrated that the developed MSPE-FTICR-MS method was suitable for the rapid and sensitive analysis of trace β-blockers in complex biological samples.

•

A MSPE-FTICR-MS method was developed for the rapid and sensitive analysis of β-blockers.

•

Novel magnetic nanoparticles (polyDOPA@Ag-MNPs) were synthesized.

•

The polyDOPA@Ag-MNPs showed high enrichment capacity during MSPE of β-blockers.

•

The loaded β-blockers were desorbed and analyzed using ESI-FTICR-MS.

•

Trace β-blockers in human blood were successfully detected.

An Effective QWBA/UHPLC-MS/Tissue Punch Approach: Solving a Pharmacokinetic Issue via Quantitative Met-ID

BACKGROUND

Methods to provide absolute quantitation of the administered drug and corresponding metabolites in tissue in a spatially resolved manner is a challenging but much needed capability in pharmaceutical research. Quantitative Whole-Body Autoradiography (QWBA) after a single- dose intravenous (3 mg/kg) and extravascular (30 mg/kg) administrations of an in vitro metabolically stable test compound (structure not reported here) indicated quick tissue distribution and excretion.

OBJECTIVE

Good bioavailability and short in vivo half-lives were determined formerly for the same test compound. For closing gaps in the understanding of pharmacokinetic data and in vitro results, radioactive hot spots on whole-body tissue sections had been profiled.

METHODS

Punches from selected tissue regions containing high radioactivity in the tissue sections previously analyzed by QWBA were extracted by a highly organic solvent and analyzed without any consecutive sample preparation step, applying Ultra High Performance Liquid Chromatography- Mass Spectrometry (UHPLC-MS) and off-line radioanalysis to maximize signal levels for metabolite identification and profiling.

RESULTS

The analysis revealed that the test compound was metabolized intensively by phase I reactions in vivo and the metabolites formed were excreted in bile and urine. The predominant metabolites showed abundant signal intensities both by MS and by radioanalysis but the MS signal intensities generally underestimated the real abundances of metabolites relative to the unchanged drug.

CONCLUSION

This work illustrates that maximizing the sensitivity of tissue punch radioanalysis and the combination with UHPLC-MS leads to a better insight into pharmacokinetic processes by providing quantitative data with high molecular selectivity.

Per-pixel absolute quantitation for mass spectrometry imaging of endogenous lipidomes by model prediction of mass transfer kinetics in single-probe-based ambient liquid extraction

With the development of mass spectrometry imaging (MSI), techniques providing quantitative information on the spatial distribution have attracted more attentions recent years. However, for MSI of endogenous compounds in bio-samples, the uncertainty of locally varied sampling efficiencies always hinders accurate absolute quantitation. Here single-probe was used for ambient liquid extraction MSI in rat cerebellum, and standards of phosphatidylcholines (PCs) and cerebrosides (CBs) were doped in extraction solvent. The extraction kinetic curves of endogenous lipids in the ambient liquid extraction during probe parking in single pixel of tissue were investigated. From the results, the extraction kinetic curves were varied between different lipid species in different brain regions, resulting in variations of extraction efficiencies between imaging pixels, and calibration with standards deposited in tissue could not compensate for the variations. In our approach, the theoretical kinetic model of ambient liquid extraction was established, and original concentrations of endogenous lipids in each pixel of tissue were predicted by fitting the experimental extraction kinetic curve in each imaging pixel to the model. The experimental data was demonstrated to be well fitted to the kinetic model with R² > 0.86, and only with 18-s extraction in each pixel, the original lipid concentrations were predicted accurately with relative errors <23%. With the new method, totally 157 lipids and small metabolites were imaged, and per-pixel quantitation was achieved for 19 PCs and 4 CBs. Compared with conventional quantitative MSI (q-MSI) method, the new q-MSI method had better reproducibility and wider linear range, and produced better contrast in the quantitative images of lipids in brain tissue with less hot spots and noises. The absolute quantitation results by the new method were verified by quantitative LC-MS method with Pearson'r > 0.9 and the slope of the linear fitting line of the correlation plot near 1.

The liquid micro junction-surface sampling probe (LMJ-SSP); a versatile ambient mass spectrometry interface

Ambient ionization methods have become important tools in mass spectrometry. The LMJ-SSP can significantly simplify/reduce lengthy sample preparation requirements associated with mass spectrometry analysis. Samples may be introduced through direct contact, insertion and droplet injection, enabling applications from drug discovery and surface analysis to tissue profiling and metabolic mapping. This review examines the underlying principles associated with the LMJ-SSP interface and highlights modifications of the original design that have extended its capability. We summarize different application areas that have exploited the method and describe potential future directions for the adaptable ambient ionization source.

Spatially resolved absolute quantitation in thin tissue by mass spectrometry

Mass spectrometry (MS) has become the de facto tool for routine quantitative analysis of biomolecules. MS is increasingly being used to reveal the spatial distribution of proteins, metabolites, and pharmaceuticals in tissue and interest in this area has led to a number of novel spatially resolved MS technologies. Most spatially resolved MS measurements are qualitative in nature due to a myriad of potential biases, such as sample heterogeneity, sampling artifacts, and ionization effects. As applications of spatially resolved MS in the pharmacological and clinical fields increase, demand has become high for quantitative MS imaging and profiling data. As a result, several varied technologies now exist that provide differing levels of spatial and quantitative information. This review provides an overview of MS profiling and imaging technologies that have demonstrated quantitative analysis from tissue. Focus is given on the fundamental processes affecting quantitative analysis in an array of MS imaging and profiling technologies and methods to address these biases.Graphical abstract.

Quantitative Mass Spectrometry Imaging of Biological Systems

Mass spectrometry imaging (MSI) is a powerful, label-free technique that provides detailed maps of hundreds of molecules in complex samples with high sensitivity and subcellular spatial resolution. Accurate quantification in MSI relies on a detailed understanding of matrix effects associated with the ionization process along with evaluation of the extraction efficiency and mass-dependent ion losses occurring in the analysis step. We present a critical summary of approaches developed for quantitative MSI of metabolites, lipids, and proteins in biological tissues and discuss their current and future applications.

Absolute quantitation of propranolol from 200-μm regions of mouse brain and liver thin tissues using laser ablation-dropletProbe-mass spectrometry

RATIONALE

The ability to quantify drugs and metabolites in tissue with sub-mm resolution is a challenging but much needed capability in pharmaceutical research. To fill this void, a novel surface sampling approach combining laser ablation with the commercial dropletProbe automated liquid surface sampling system (LA-dropletProbe) was developed and is presented here.

METHODS

Parylene C-coated 200 × 200 μm tissue regions of mouse brain and kidney thin tissue sections were analyzed for propranolol by laser ablation of tissue directly into a preformed liquid junction. Propranolol was detected by high-performance liquid chromatography/tandem mass spectrometry (HPLC/MS/MS) in positive electrospray ionization mode. Quantitation was achieved via application of a stable-isotope-labeled internal standard and an external calibration curve.

RESULTS

The absolute concentrations of propranolol determined from 200 × 200 μm tissue regions were compared with the propranolol concentrations obtained from 2.3-mm-diameter tissue punches of adjacent, non-coated sections using standard bulk tissue extraction protocols followed by regular HPLC/MS/MS analysis. The average concentration of propranolol in both organs determined by the two employed methods agreed to within ±12%. Furthermore, the relative abundances of phase II hydroxypropranolol glucuronide metabolites were recorded and found to be consistent with previous results.

CONCLUSIONS

This work illustrates that depositing a thin layer of parylene C onto thin tissue prior to analysis, which seals the surface and prevents direct liquid extraction of the drug from the tissue, coupled to the novel LA-dropletProbe surface sampling system is a viable approach for sub-mm resolution quantitative drug distribution analysis.

Integrated laser ablation-dropletProbe-mass spectrometry for absolute drug quantitation, metabolite detection, and distribution in tissue

RATIONALE

Spatially resolved and accurate quantitation of drug-related compounds in tissue is a much-needed capability in drug discovery research. Here, application of an integrated laser ablation-dropletProbe-mass spectrometry surface sampling system (LADP-MS) is reported, which achieved absolute quantitation of propranolol measured from <500 × 500 μm thin tissue samples.

METHODS

Mouse liver and kidney thin tissue sections were coated with parylene C and analyzed for propranolol by a laser ablation/liquid extraction workflow. Non-coated adjacent sections were microdissected for validation and processed using standard bulk tissue extraction protocols. High-performance liquid chromatography with positive ion mode electrospray ionization tandem mass spectrometry was applied to detect the drug and its metabolites.

RESULTS

Absolute propranolol concentration in ~500 × 500 μm tissue regions measured by the two methods agreed within ±8% and had a relative standard deviation within ±17%. Quantitation down to ~400 × 400 μm tissue regions was shown, and this resolution was also used for automated mapping of propranolol and phase II hydroxypropranolol glucuronide metabolites in kidney tissue.

CONCLUSIONS

This study exemplifies the capabilities of integrated laser ablation-dropletProbe-mass spectrometry (LADP-MS) for high resolution absolute drug quantitation analysis of thin tissue sections. This capability will be valuable for applications needing to quantitatively understand the spatial distribution of small molecules in tissue.

Combining MALDI mass spectrometry imaging and droplet-base surface sampling analysis for tissue distribution, metabolite profiling, and relative quantification of cyclic peptide melanotan II

Peptides have become a fast-growing segment of the pharmaceutical industry over the past few decades. It is essential to develop cutting edge analytical techniques to support the discovery and development of peptide therapeutics, especially to examine their absorption, distribution, metabolism and excretion (ADME) properties. Herein, we utilized two label-free mass spectrometry (MS) based techniques to investigate representative challenges in developing therapeutic peptides, such as tissue distribution, metabolic stability and clearance. A tool proof-of-concept cyclic peptide, melanotan II, was used in this study. Matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI), which is a well-developed label-free imaging technique, was used to map the detailed molecular distribution of melanotan II and its metabolites. Droplet-based liquid microjunction surface sampling liquid chromatography-high resolution mass spectrometry (LMJ-SSP-LC-HRMS) was used in combination with MALDI-MSI to rapidly profile molecular information and provide structural insights on drug and metabolites. Using both techniques in parallel allowed a more comprehensive and complementary data set than using either technique independently. We envision MALDI-MSI and droplet-based LMJ-SSP-LC-HRMS, which can be used in combination or as standalone techniques, to become valuable tools for assessing the in vivo fate of peptide therapeutics in support of drug discovery and development.

Nanoextraction Coupled to Liquid Chromatography Mass Spectrometry Delivers Improved Spatially Resolved Analysis

Direct analyte-probed nanoextraction (DAPNe) is a technique that allows extraction of drug and endogenous compounds from a discrete location on a tissue sample using a nano capillary filled with solvent. Samples can be extracted from spot diameters as low as 6 μm. Studies previously undertaken by our group have shown that the technique can provide good precision (5%) for analyzing drug molecules in 150 μm diameter areas of homogenized tissue, provided an internal standard is sprayed on to the tissue prior to analysis. However, without an isotopically labeled standard, the repeatability is poor, even after normalization to the spot area or matrix compounds. By application to tissue homogenates spiked with drug compounds, we can demonstrate that it is possible to significantly improve the repeatability of the technique by incorporating a liquid chromatography separation step. Liquid chromatography is a technique for separating compounds prior to mass spectrometry (LC-MS) which enables separation of isomeric compounds that cannot be discriminated using mass spectrometry alone, as well as reducing matrix interferences. Conventionally, LC-MS is carried out on bulk or homogenized samples, which means analysis is essentially an average of the sample and does not take into account discrete areas. This work opens a new opportunity for spatially resolved liquid chromatography mass spectrometry with precision better than 20%.

Comparison between thaw-mounting and use of conductive tape for sample preparation in ToF-SIMS imaging of lipids in Drosophila microRNA-14 model

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) imaging elucidates molecular distributions in tissue sections, providing useful information about the metabolic pathways linked to diseases. However, delocalization of the analytes and inadequate tissue adherence during sample preparation are among some of the unfortunate phenomena associated with this technique due to their role in the reduction of the quality, reliability, and spatial resolution of the ToF-SIMS images. For these reasons, ToF-SIMS imaging requires a more rigorous sample preparation method in order to preserve the natural state of the tissues. The traditional thaw-mounting method is particularly vulnerable to altered distributions of the analytes due to thermal effects, as well as to tissue shrinkage. In the present study, the authors made comparisons of different tissue mounting methods, including the thaw-mounting method. The authors used conductive tape as the tissue-mounting material on the substrate because it does not require heat from the finger for the tissue section to adhere to the substrate and can reduce charge accumulation during data acquisition. With the conductive-tape sampling method, they were able to acquire reproducible tissue sections and high-quality images without redistribution of the molecules. Also, the authors were successful in preserving the natural states and chemical distributions of the different components of fat metabolites such as diacylglycerol and fatty acids by using the tape-supported sampling in microRNA-14 (miR-14) deleted Drosophila models. The method highlighted here shows an improvement in the accuracy of mass spectrometric imaging of tissue samples.

Coupling matrix-assisted ionization with high resolution mass spectrometry and electron transfer dissociation to characterize intact proteins and post-translational modifications

Matrix-assisted ionization (MAI) is a recently developed ionization technique that produces multiply charged ions on either electrospray ionization (ESI) or matrix-assisted laser desorption/ionization (MALDI) platform without the need of high voltage or laser ablation. In this study, MAI has been coupled to a high resolution accurate mass (HRAM) hybrid instrument, the Orbitrap Elite mass spectrometer, with electron transfer dissociation (ETD) module for fast peptide and intact protein characterization. The softness of MAI process preserves labile post-translational modifications (PTM) and allows fragmentation and localization by ETD. Moreover, MAI on ESI platform allows rapid sample preparation and analysis (~ 1 min/sample) due to the easiness of sample introduction. It significantly improves the throughput compared to ESI direct infusion and MAI on MALDI platform, which usually takes more than 10 min/sample. Intact protein standards, protein mixtures, and neural tissue extracts have been characterized using this instrument platform with both full MS and MS/MS (CID, HCD, and ETD) analyses. Furthermore, the performances of ESI, MALDI, and MAI on both platforms have been tested to provide a systematic comparison among these techniques. With improved ETD performance and PTM analysis capabilities, we anticipate that the HRAM MAI-MS with ETD module will offer greater utilities in large molecule characterization with enhanced speed and coverage. These advancements will enable promising applications in bottom-up and top-down protein analyses. Graphical abstract Matrix-assisted ionization (MAI) for characterizing intact proteins and post-translational modifications with representative mass spectra from intact proteins.

Compound Property Optimization in Drug Discovery Using Quantitative Surface Sampling Micro Liquid Chromatography with Tandem Mass Spectrometry

Surface sampling micro liquid chromatography tandem mass spectrometry (SSμLC-MS/MS) was explored as a quantitative tissue distribution technique for probing compound properties in drug discovery. A method was developed for creating standard curves using surrogate tissue sections from blank tissue homogenate spiked with compounds. The resulting standard curves showed good linearity and high sensitivity. The accuracy and precision of standards met acceptance criteria of ±30%. A new approach was proposed based on an experimental and mathematical method for tissue extraction efficiency evaluation by means of consecutively sampling a location on tissue twice by SSμLC-MS/MS. The observed extraction efficiency ranged from 69% to 82% with acceptable variation for the test compounds. Good agreement in extraction efficiency was observed between surrogate tissue sections and incurred tissue sections. This method was successfully applied to two case studies in which tissue distribution was instrumental in advancing project teams' understanding of compound properties.