easyEndo robotic endoscopy system: Development and usability test in a randomized controlled trial with novices and physicians

Design and Evaluation of an Omnidirectional Wheel-Driven Endoscope-Assisted Robotic System Based on Motion Capture Control

BACKGROUND

In endoscopic surgery, surgeons collaborate with assistants to manipulate the endoscope and instruments, making it impossible to perform the surgery independently.

METHODS

We propose an endoscopic assistive robot based on motion capture control, enabling surgeons to control the endoscope with one hand. The system uses cameras at the master end to capture real-time motion information from the marker accessory, determining the surgeon's intent. It then controls the robot at the slave end to simulate surgical delivery actions, enabling precise endoscopic positioning through master-slave mapping. The omnidirectional wheel design addresses coupling issues of traditional friction wheels, significantly improving control accuracy.

RESULTS

Testing demonstrated a maximum delivery error of 3.99% and 45.77% improvement in rotational precision. The system received positive feedback in both simulated and animal trials.

CONCLUSIONS

The system empowers surgeons to perform endoscopic procedures independently, establishing a foundation for advancing diagnosis and treatment of gastric diseases.

Separable Tendon-Driven Robotic Manipulator with a Long, Flexible, Passive Proximal Section

This work tackles practical issues which arise when using a tendon-driven robotic manipulator (TDRM) with a long, flexible, passive proximal section in medical applications. Tendon-driven devices are preferred in medicine for their improved outcomes via minimally invasive procedures, but TDRMs come with unique challenges such as sterilization and reuse, simultaneous control of tendons, hysteresis in the tendon-sheath mechanism, and unmodeled effects of the proximal section shape. A separable TDRM which overcomes difficulties in actuation and sterilization is introduced, in which the body containing the electronics is reusable and the remainder is disposable. An open-loop redundant controller which resolves the redundancy in the kinematics is developed. Simple linear hysteresis compensation and re-tension compensation based on the physical properties of the device are proposed. The controller and compensation methods are evaluated on a testbed for a straight proximal section, a curved proximal section at various static angles, and a proximal section which dynamically changes angles; and overall, distal tip error was reduced.

A robotic system for solo surgery in flexible ureteroscopy: development and evaluation with clinical users

PURPOSE

The robotic system CoFlex for kidney stone removal via flexible ureteroscopy (fURS) by a single surgeon (solo surgery, abbreviated SSU) is introduced. It combines a versatile robotic arm and a commercially available ureteroscope to enable gravity compensation and safety functions like virtual walls. The haptic feedback from the operation site is comparable to manual fURS, as the surgeon actuates all ureteroscope DoF manually.

METHODS

The system hardware and software as well as the design of an exploratory user study on the simulator model with non-medical participants and urology surgeons are described. For each user study task both objective measurements (e.g., completion time) and subjective user ratings of workload (using the NASA-TLX) and usability (using the System Usability Scale SUS) were obtained.

RESULTS

CoFlex enabled SSU in fURS. The implemented setup procedure resulted in an average added setup time of 341.7 ± 71.6 s, a NASA-TLX value of 25.2 ± 13.3 and a SUS value of 82.9 ± 14.4. The ratio of inspected kidney calyces remained similar for robotic (93.68 %) and manual endoscope guidance (94.74 %), but the NASA-TLX values were higher (58.1 ± 16.0 vs. 48.9 ± 20.1) and the SUS values lower (51.5 ± 19.9 vs. 63.6 ± 15.3) in the robotic scenario. SSU in the fURS procedure increased the overall operation time from 1173.5 ± 355.7 s to 2131.0 ± 338.0 s, but reduced the number of required surgeons from two to one.

CONCLUSIONS

The evaluation of CoFlex in a user study covering a complete fURS intervention confirmed the technical feasibility of the concept and its potential to reduce surgeon working time. Future development steps will enhance the system ergonomics, minimize the users' physical load while interacting with the robot and exploit the logged data from the user study to optimize the current fURS workflow.

Feasibility of multi-section continuum robotic ureteroscope in the kidney

Our objective was to evaluate the feasibility of a multi-section continuum robotic ureteroscope to address the difficulties with access into certain renal calyces during flexible ureteroscopy. First, the robotic ureteroscope developed in previous research, which utilizes three actuated bendable sections controlled by wires, was modified for use in this project. Second, using phantom models created from five randomly selected computer tomography urograms, the flexible ureteroscope and robotic ureteroscope were evaluated, focusing on several factors: time taken to access each renal calyx, time taken to aim at three targets on each renal calyx, the force generated in the renal pelvic wall associated with ureteroscope manipulation, and the distance and standard deviation between the ureteroscope and the target. As a result, the robotic ureteroscope utilized significantly less force during lower pole calyx access (flexible ureteroscope vs. robotic ureteroscope; 2.0 vs. 0.98 N, p = 0.03). When aiming at targets, the standard deviation of proper target access was smaller for each renal calyx (upper pole: 0.49 vs. 0.11 mm, middle: 0.84 vs. 0.12 mm, lower pole: 3.4 vs. 0.19 mm) in the robotic ureteroscope group, and the distance between the center point of the ureteroscope image and the target was significantly smaller in the robotic ureteroscope group (upper: 0.49 vs. 0.19 mm, p < 0.001, middle: 0.77 vs. 0.17 mm, p < 0.001, lower: 0.77 vs. 0.22 mm, p < 0.001). In conclusion, our robotic ureteroscope demonstrated improved maneuverability and facilitated accuracy and precision while reducing the force on the renal pelvic wall during access into each renal calyx.

Endoscopic simulators: training the next generation

PURPOSE OF REVIEW

To provide a review of current evidence evaluating endoscopic simulators as teaching platforms in gastroenterology training, with emphasis on upper gastrointestinal anatomy.

RECENT FINDINGS

Endoscopic simulators have leveraged mechanical, virtual reality and ex-vivo or live animal platforms to deliver training in both general and therapeutic endoscopy. Simulators have demonstrated their greatest utility in training novice endoscopists. Intermediate and expert endoscopists may additionally benefit from simulator exposure when learning advanced therapeutic techniques including large tissue resection or natural orifice transluminal endoscopic surgery.

SUMMARY

Simulator-based learning offers promise to complement conventional endoscopic training modalities for novice trainees. Nevertheless, additional evidence demonstrating a clear benefit is required for simulators to become an integral part of gastroenterology training. As novel advanced endoscopic therapies are developed, endoscopic simulators may assume a larger role in training prior to clinical practice.