Quantitative microleakage analysis of root canal filling materials in single-rooted canals

Clinical application of calcium silicate-based bioceramics in endodontics

Pulp treatment is extremely common in endodontics, with the main purpose of eliminating clinical symptoms and preserving tooth physiological function. However, the effect of dental pulp treatment is closely related to the methods and materials used in the process of treatment. Plenty of studies about calcium silicate-based bioceramics which are widely applied in various endodontic operations have been reported because of their significant biocompatibility and bioactivity. Although most of these materials have superior physical and chemical properties, the differences between them can also have an impact on the success rate of different clinical practices. Therefore, this review is focused on the applications of several common calcium silicate-based bioceramics, including Mineral trioxide aggregate (MTA), Biodentine, Bioaggregate, iRoot BP Plus in usual endodontic treatment, such as dental pulp capping, root perforation repair, regenerative endodontic procedures (REPs), apexification, root-end filling and root canal treatment (RCT). Besides, the efficacy of these bioceramics mentioned above in human trials is also compared, which aims to provide clinical guidance for their clinical application in endodontics.

Thermal and volumetric assessment of endodontic filling techniques using infrared thermography and micro-CT

PURPOSE

To assess root temperature during filling techniques and quantify the volume of endodontic filling materials using infrared thermography (IT) and micro-computed tomography (micro-CT).

METHODS

Ninety premolars were divided into three groups: lateral condensation (LC), single cone (SC) and thermomechanical compaction (TMC). For thermal analysis, 45 teeth were assessed using a FLIR T650sc IT camera during filling techniques and 45 teeth were scanned using a Nikon micro-CT to assess gutta-percha, cement, and void volumes. Descriptive and inferential statistical analyses were performed (non-parametric Mann-Whitney test, Kruskal-Wallis test, and Friedman test with Tukey's bidirectional analysis of variance).

RESULTS

TMC showed the highest temperature increase at 15 s after the procedure and a significant temperature decrease at 45 s after its completion. TMC showed the largest volume of gutta-percha and LC the highest void volume.

CONCLUSION

The temperature increase generated by gutta-percha endodontic filling techniques is within acceptable limits. A greater volume of endodontic cement was observed for the SL and LC filling techniques.

Comparison of Obturation Quality after MTA Orthograde Filling with Various Obturation Techniques

This study aimed to quantify and compare the obturation quality after mineral trioxide aggregate (MTA) orthograde fillings with three different obturation techniques. Thirty-three extracted human maxillary molars were collected. Distobuccal and palatal canals were prepared to an apical size of #40/06 with a Profile Ni-Ti system. All 66 canals were divided into two groups according to the material (EZ-seal or OrthoMTA) and then obturated using three different techniques: manual compaction using S-kondenser (group H), compactor activation (group C), or reverse rotary motion of Ni-Ti file (group R). The obturated roots were scanned using micro-computed tomography (micro-CT). The percentage of voids located in the apical 5 mm was measured separately, that is, closed, open, and total porosity. There was no relation between the filling material and obturation technique (p > 0.05). The percentage volume of open and total porosity was higher in EZ-seal than in OrthoMTA (open: p = 0.002, total: p = 0.001). Group H showed higher open and total porosity than groups C and R. Micro-CT analysis showed that the void volume after orthograde MTA fillings significantly decreased when the additional activation was accompanied by hand condensation. Obturation with a Ni-Ti file using reverse motion could be recommended as an MTA orthograde filling technique.

Influence of two photodynamic therapy sessions and different photosensitizers on the bond strength of glass-fiber posts in different regions of intraradicular dentin

BACKGROUND

Although photodynamic therapy associated with photosensitizers can promote microbial reduction, studies evaluating the consequences of two photodynamic therapy sessions associated with different photosensitizers on the bond strength of glass-fiber posts to endodontically treated intraradicular dentin are scarce. This in vitro study aimed to investigate the influence of two photodynamic therapy sessions using methylene blue or curcumin photosensitizers on the bond strength of glass-fiber posts to intraradicular dentin in different root thirds.

METHODS

Seventy-two teeth were divided into 9 experimental groups according to photosensitizer type, concentration and light-activation: Control - deionized water; Methylene blue 50 mg/L; Methylene blue 50 mg/L + laser; Methylene blue 100 mg/L; Methylene blue 100 mg/L + laser; Curcumin 500 mg/L; Curcumin 500 mg/L + LED; Curcumin 1000 mg/L; and Curcumin 1000 mg/L + LED. Push-out bond strength of the fiber posts to endodontically treated dentin was evaluated using a universal test machine (n = 8). Bond strength data underwent Kruskal-Wallis test, followed by Dunn test for comparison between treatments, and Friedman test for comparison between thirds (α = 0.05). Illustrative scanning electron microscopy images were obtained to qualify the failure mode.

RESULTS

Curcumin at higher concentration, activated or not by blue LED, decreased the bond strength values in the apical region when compared with the control group (P < 0.05). There was no difference between two photodynamic therapy sessions using methylene blue photosensitizer (activated or not) and the control group regardless of concentrations and root canal depth evaluated (P > 0.05). Regarding intraradicular depth, the different thirds showed no statistical difference on bond strength values (P > 0.05). All experimental groups presented predominance of mixed-type failure, excepting the methylene blue group at higher concentration activated by red laser, and the curcumin photosensitizer at both concentrations activated by blue LED.

CONCLUSIONS

Methylene blue at a 50 mg/L concentration can be applied in two PDT sessions, after biomechanical preparation and before glass-fiber post luting, as it presents no influence on root dentin bond strength in in vitro conditions.

Biocompatibility and Mineralization Activity of Three Calcium Silicate-Based Root Canal Sealers Compared to Conventional Resin-Based Sealer in Human Dental Pulp Stem Cells

The purpose of this study was to compare the cytotoxic effects and mineralization activity of three calcium silicate-based root canal sealers to those of a conventional resin-based sealer. Experiments were performed using human dental pulp stem cells grown in a monolayer culture. The root canal sealers tested in this study were EndoSequence BC Sealer (Brasseler), BioRoot RCS (Septodont), Endoseal MTA (Maruchi), and AH Plus (Dentsply DeTrey). Experimental disks 6 mm in diameter and 3 mm in height were made and stored in a 100% humidity chamber at 37 °C for 72 h to achieve setting. The cytotoxicity of various root canal sealers was evaluated using a methyl-thiazoldiphenyl-tetrazolium (MTT) assay. To evaluate cell migration ability, a scratch wound healing method was used, and images of the scratch area were taken using a phase-contrast microscope. Cell morphology was evaluated by a scanning electron microscope after direct exposure for 72 h to each sealer disk. In the cell viability assay, there were no significant differences between the EndoSequence BC, BioRoot RCS, Endoseal MTA, and control groups in any experimental period (p > 0.05). In the cell migration assay, there were no significant differences between the EndoSequence BC, Endoseal MTA, and control groups in any experimental period (p > 0.05). BioRoot RCS exhibited slower cell migration relative to EndoSequence BC and Endoseal MTA for up to 72 h (p < 0.05). Conversely, it showed a similar wound healing percentage at 96 h (p > 0.05). In an evaluation of cell morphology, cells in direct contact with EndoSequence BC, BioRoot RCS, and Endoseal MTA disks showed superior spreading compared to those in contact with the AH Plus disk. In an Alizarin red staining assay, EndoSequence BC, BioRoot RCS, and Endoseal MTA showed a significant increase in mineralized nodule formation compared to the AH Plus group (p < 0.05). In conclusion, all calcium silicate-based root canal sealers tested in this study showed good biological properties and mineralization activity compared to conventional resin-based sealer.

Intratubular Biomineralization in a Root Canal Filled with Calcium-Enriched Material over 8 Years

This case report describes intratubular biomineralization in root canal, filled with calcium-enriched material after 8 years of clinical maintenance. The schematic findings of dentinal tubules were investigated with scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The root canal obturation material was closely adapted to root dentin surface, suggesting the possibility of chemical bonding between the two interfaces. SEM and EDS observation of dentinal tubules showed intratubular biomineralized crystal structures with Ca/P ratio in a range of 1.30-2.12, suggesting bioactive capacity of calcium-enriched material.

Effect of acidic solutions on the microhardness of dentin and set OrthoMTA and their cytotoxicity on murine macrophage

OBJECTIVES

To evaluate the effects of three acids on the microhardness of set mineral trioxide aggregate (MTA) and root dentin, and cytotoxicity on murine macrophage.

MATERIALS AND METHODS

OrthoMTA (BioMTA) was mixed and packed into the human root dentin blocks of 1.5 mm diameter and 5 mm height. Four groups, each of ten roots, were exposed to 10% citric acid (CA), 5% glycolic acid (GA), 17% ethylenediaminetetraacetic acid (EDTA), and saline for five minutes after setting of the OrthoMTA. Vickers surface microhardness of set MTA and dentin was measured before and after exposure to solutions, and compared between groups using one-way ANOVA with Tukey test. The microhardness value of each group was analyzed using student t test. Acid-treated OrthoMTA and dentin was examined by scanning electron microscope (SEM). Cell viability of tested solutions was assessed using WST-8 assay and murine macrophage.

RESULTS

Three test solutions reduced microhardness of dentin. 17% EDTA demonstrated severe dentinal erosion, significantly reduced the dentinal microhardness compared to 10% CA (p = 0.034) or 5% GA (p = 0.006). 10% CA or 5% GA significantly reduced the surface microhardness of set MTA compared to 17% EDTA and saline (p < 0.001). Acid-treated OrthoMTA demonstrated microporous structure with destruction of globular crystal. EDTA exhibited significantly more cellular toxicity than the other acidic solutions at diluted concentrations (0.2, 0.5, 1.0%).

CONCLUSIONS

Tested acidic solutions reduced microhardness of root dentin. Five minute's application of 10% CA and 5% GA significantly reduced the microhardness of set OrthoMTA with lower cellular cytotoxicity compared to 17% EDTA.

Evaluation of three obturation techniques in the apical third of mandibular first molar mesial root canals using micro-computed tomography

Background/purpose

Recent studies have demonstrated a high incidence of isthmuses in mandibular first molar mesial roots, and intratubular mineralization following mineral trioxide aggregate obturation. This study assessed the filling quality of three obturation techniques in the apical 5 mm of mandibular first molar mesial root canals.

Materials and methods

Sixty extracted human mandibular first molar mesial roots with two separate canals that had interconnecting isthmuses, were prepared to an apical size of 40/0.06. They were allocated to three groups of 20 roots for obturation by either cold lateral compaction (CLC) or the continuous wave of condensation (CW) that used gutta-percha and AH Plus sealer, or by an orthograde canal obturation using OrthoMTA. The obturated roots were scanned by micro-computed tomography and assessed for the volumetric ratio (%) of gutta-percha, sealer, and OrthoMTA within the main canals or isthmuses in the apical 5 mm area. Measurements were analyzed statistically for differences among three obturation techniques.

Results

In the main canals, filled volume ratios were not significantly different among groups. Within isthmuses, the filled volume ratio for CLC was lower than in CW (P = 0.025) or OrthoMTA (P = 0.002). In isthmuses, the gutta-percha volume ratio in CLC was lower than in CW (P = 0.005), although the sealer volume ratio was higher than in CW (P = 0.049).

Conclusion

CLC demonstrated lower filling densities in isthmuses in the apical region than either CW or OrthoMTA. Orthograde MTA obturation showed comparable filling quality to gutta-percha with sealer.