Electron spectroscopy of the main allotropes of carbon

Covalent functionalization by using blue light activated radicals: on the reaction mechanisms of arylazo sulfone binding on graphene

Covalent functionalization of graphene presents a pivotal strategy to enhance its surface properties and overcome inherent chemical inertness. While diazonium salts have been extensively utilized for this purpose, their limitations necessitate exploration of alternative approaches. Arylazo sulfones, such as diazonium salt derivatives serving as chromophores, offer a promising solution, enabling photochemical reactions under visible light. Here, we propose a novel method for rapid covalent photofunctionalization of chemical vapor deposition (CVD) graphene on copper substrates using arylazo sulfones. The generation of aryl radicals - chlorobenzene in this case - was achieved through blue light LED irradiation of 4-chlorophenylazo methyl sulfone solution in acetonitrile. Efficient surface covalent modification of graphene was verified by observing (i) the photogeneration of radicals with a decrease in the π-π* band absorbance and an increase in the n-π* of arylazosulfone solution by UV-Vis spectroscopy; (ii) an increase in C sp3 defects on graphene from the Raman D band, the Auger C KLL signal and graphene C 1s X-ray photoelectron spectroscopy (XPS); and (iii) the presence of the chlorobenzene XPS Cl 2p signal. The aryl radical generation was enhanced by the copper substrate during irradiation, with a possible double path reaction mechanism. This approach highlights the versatility of arylazo sulfones in covalently patterning graphene surfaces, thus unlocking opportunities by overcoming the current approach consisting of the deposition of resist materials with successive cycles of lithography and electrochemistry.

Low-Temperature Direct Growth of Nanocrystalline Multilayer Graphene on Silver with Long-Term Surface Passivation

A wide variety of transition metals, including copper and gold, have been successfully used as substrates for graphene growth. On the other hand, it has been challenging to grow graphene on silver, so realistic applications by combining graphene and silver for improved electrode stability and enhanced surface plasmon resonance in organic light-emitting diodes and biosensing have not been realized to date. Here, we demonstrate the surface passivation of silver through the single-step rapid growth of nanocrystalline multilayer graphene on silver via low-temperature plasma-enhanced chemical vapor deposition (PECVD). The effect of the growth time on the graphene quality and the underlying silver characteristics is investigated by Raman spectroscopy, X-ray diffraction, atomic force microscopy, X-ray photoelectron spectroscopy (XPS), and cross-sectional annular dark-field scanning transmission electron microscopy (ADF-STEM). These results reveal nanocrystalline graphene structures with turbostratic layer stacking. Based on the XPS and ADF-STEM results, a PECVD growth mechanism of graphene on silver is proposed. The multilayer graphene also provides excellent long-term protection of the underlying silver surface from oxidation after 5 months of air exposure. This development thus paves the way toward realizing technological applications based on graphene-protected silver surfaces and electrodes as well as hybrid graphene-silver plasmonics.

Recent Progress of Nanodiamond Film in Controllable Fabrication and Field Emission Properties

The interest in the field electron emission cathode nanomaterials is on the rise due to the wide applications, such as electron sources, miniature X-ray devices, display materials, etc. In particular, nanodiamond (ND) film is regarded as an ideal next-generation cathode emitter in the field emission devices, due to the low or negative electron affinity, small grain size, high mechanical hardness, low work function, and high reliability. Increasing efforts are conducted on the investigation of the emission structures, manufacturing cost, and field emission properties improvement of the ND films. This review aims to summarize the recent research, highlight the new findings, and provide a roadmap for future developments in the area of ND film electron field emitter. Specially, the optimizing methods of large-scale, high-quality, and cost-effective synthesis of ND films are discussed to achieve more stable surface structure and optimal physical properties. Additionally, the mainstream strategies applied to produce high field emission performance of ND films are analyzed in detail, including regulating the grain size/boundary, hybrid phase carbon content, and doping element/type of ND films; meanwhile, the problems existing in the related research and the outlook in this area are also discussed.

Extra-Low Dosage Graphene Oxide Cementitious Nanocomposites: A Nano- to Macroscale Approach

The impact of extra-low dosage (0.01% by weight of cement) Graphene Oxide (GO) on the properties of fresh and hardened nanocomposites was assessed. The use of a minimum amount of 2-D nanofiller would minimize costs and sustainability issues, therefore encouraging the market uptake of nanoengineered cement-based materials. GO was characterized by X-ray Photoelectron Spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), Atomic Force Microscopy (AFM), X-ray Diffraction (XRD), and Raman spectroscopy. GO consisted of stacked sheets up to 600 nm × 800 nm wide and 2 nm thick, oxygen content 31 at%. The impact of GO on the fresh admixtures was evaluated by rheology, flowability, and workability measurements. GO-modified samples were characterized by density measurements, Scanning Electron Microscopy (SEM) analysis, and compression and bending tests. Permeability was investigated using the boiling-water saturation technique, salt ponding test, and Initial Surface Absorption Test (ISAT). At 28 days, GO-nanocomposite exhibited increased density (+14%), improved compressive and flexural strength (+29% and +13%, respectively), and decreased permeability compared to the control sample. The strengthening effect dominated over the adverse effects associated with the worsening of the fresh properties; reduced permeability was mainly attributed to the refining of the pore network induced by the presence of GO.

One-Step Plasma Synthesis of Nitrogen-Doped Carbon Nanomesh

A one-step method for plasma synthesis of nitrogen-doped carbon nanomesh is presented. The method involves a molten polymer, which is a source of carbon, and inductively coupled nitrogen plasma, which is a source of highly reactive nitrogen species. The method enables the deposition of the nanocarbon layer at a rate of almost 0.1 µm/s. The deposited nanocarbon is in the form of randomly oriented multilayer graphene nanosheets or nanoflakes with a thickness of several nm and an area of the order of 1000 nm². The concentration of chemically bonded nitrogen on the surface of the film increases with deposition time and saturates at approximately 15 at.%. Initially, the oxygen concentration is up to approximately 10 at.% but decreases with treatment time and finally saturates at approximately 2 at.%. Nitrogen is bonded in various configurations, including graphitic, pyridinic, and pyrrolic nitrogen.

ESCA as a Tool for Exploration of Metals’ Surface

The main principles and development of electron spectroscopy for chemical analysis (ESCA) are briefly reviewed. The role of ESCA techniques (X-ray photoelectron spectroscopy and Auger electron spectroscopy) in the investigation of metallic surfaces is discussed, evidencing their importance and analytical potentiality. An overview is given of a series of recent experimental cases of ESCA application for the characterization of different metals and metallic alloys, illustrating the main results and various phenomena, such as the formation of impurity defects, corrosion, migration of constituent elements in various alloys, clustering in liquid alloy, etc., that can occur on the surface and the interface of investigated materials. These materials comprise the collection coins of noble metals, some metal alloys and Ni-based superalloys, nitride coatings on stainless steel, composite material with TiAlV alloy, treated austenitic steels, and graphene interface with polycrystalline metal foils. The present review could be particularly recommended for the newcomers to the research field of surface analysis and its application for various metals, their treatments, and possible modifications in operating conditions.

A Review of Strategies for the Synthesis of N-Doped Graphene-Like Materials

Methods for synthesizing nitrogen-doped graphene-like materials have attracted significant attention among the scientific community because of the possible applications of such materials in electrochemical devices such as fuel cells, supercapacitors and batteries, as well as nanoelectronics and sensors. The aim of this paper is to review recent advances in this scientific niche. The most common synthesis technique is nitridization of as-deposited graphene or graphene-containing carbon mesh using a non-equilibrium gaseous plasma containing nitrogen or ammonia. A variety of chemical bonds have been observed, however, it is still a challenge how to ensure preferential formation of graphitic nitrogen, which is supposed to be the most favorable. The nitrogen concentration depends on the processing conditions and is typically few at.%; however, values below 1 and up to 20 at.% have been reported. Often, huge amounts of oxygen are found as well, however, its synergistic influence on N-doped graphene is not reported. The typical plasma treatment time is several minutes. The results reported by different authors are discussed, and future needs in this scientific field are summarized. Some aspects of the characterization of graphene samples with X-ray photoelectron spectroscopy and Raman spectroscopy are presented as well.

Non-covalent Functionalization of Graphene to Tune Its Band Gap and Stabilize Metal Nanoparticles on Its Surface

Controlling graphene conductivity is crucial for its potential applications. With this focus, this paper shows the effect of the non-covalent bonding of a pyrimidine derivative (HIS) on the electronic properties of graphene (G). Several G-HIS hybrids are prepared through mild treatments keeping unaltered the structures of both G and HIS. The attachment of HIS to G occurs by π-π stacking of the HIS-aromatic residue with the G surface. This partially blocks the p z electrons of G, giving rise to the splitting of both the valence and conduction bands. Moreover, the width of the splitting is directly related to the HIS content. This fact allows the fine-tuning of the band gap of G-HIS hybrids. Furthermore, HIS keeps its metal-complexing ability in the G-HIS hybrids. Taking advantage of this, a G-HIS-Cu(0) composite was prepared by H2 plasma reduction of a precursor of the G-HIS-Cu(II) type. G-HIS-Cu(0) contains Cu(0) clusters stabilized on the G surface due to interactions with the COO- functions of HIS. In an analogous hybrid, G-HIS-Au(0), the Au(0) NPs are also stabilized by COO- functions. This material, consisting of the coupling of Au(0) NPs and G-HIS, photocatalyzed water reduction under visible light radiation producing 12.5 μmol·g-1·h-1of hydrogen.

Room temperature Co-doped manganite/graphene sensor operating at high pulsed magnetic fields

The demand to increase the sensitivity to magnetic field in a broad magnetic field ranges has led to the research of novel materials for sensor applications. Therefore, the hybrid system consisting of two different magnetoresistive materials – nanostructured Co-doped manganite La_1−xSr_x(Mn_1−yCo_y)_zO₃ and single- and few-layer graphene – were combined and investigated as potential system for magnetic field sensing. The negative colossal magnetoresistance (CMR) of manganite-cobaltite and positive one of graphene gives the possibility to increase the sensitivity to magnetic field of the hybrid sensor. The performed magnetoresistance (MR) measurements of individual few layer (n = 1–5) graphene structures revealed the highest MR values for three-layer graphene (3LG), whereas additional Co-doping increased the MR values of nanostructured manganite films. The connection of 3LG graphene and Co-doped magnanite film in a voltage divider configuration significantly increased the sensitivity of the hybrid sensor at low and intermediate magnetic fields (1–2 T): 70 mV/VT of hybrid sensor in comparison with 56 mV/VT for 3LG and 12 mV/VT for Co-doped magnanite film, respectively, and broadened the magnetic field operation range (0.1–20) T of the produced sensor prototype.

Large-scale synthesis of free-standing N-doped graphene using microwave plasma

Direct assembling of N-graphene, i.e. nitrogen doped graphene, in a controllable manner was achieved using microwave plasmas at atmospheric pressure conditions. The synthesis is accomplished via a single step using ethanol and ammonia as carbon and nitrogen precursors. Tailoring of the high-energy density plasma environment results in a selective synthesis of N-graphene (~0.4% doping level) in a narrow range of externally controlled operational conditions, i.e. precursor and background gas fluxes, plasma reactor design and microwave power. Applying infrared (IR) and ultraviolet (UV) irradiation to the flow of free-standing sheets in the post-plasma zone carries out changes in the percentage of sp², the N doping type and the oxygen functionalities. X-ray photoelectron spectroscopy (XPS) revealed the relative extension of the graphene sheets π-system and the type of nitrogen chemical functions present in the lattice structure. Scanning Electron microscopy (SEM), Transmission Electron microscopy (TEM) and Raman spectroscopy were applied to determine morphological and structural characteristics of the sheets. Optical emission and FT-IR spectroscopy were applied for characterization of the high-energy density plasma environment and outlet gas stream. Electrochemical measurements were also performed to elucidate the electrochemical behavior of NG for supercapacitor applications.

Discriminating between Different Heavy Metal Ions with Fullerene-Derived Nanoparticles

A novel type of graphene-like nanoparticle, synthesized by oxidation and unfolding of C₆₀ buckminsterfullerene fullerene, showed multiple and reproducible sensitivity to Cu²⁺, Pb²⁺, Cd²⁺, and As(III) through different degrees of fluorescence quenching or, in the case of Cd²⁺, through a remarkable fluorescence enhancement. Most importantly, only for Cu²⁺ and Pb²⁺, the fluorescence intensity variations came with distinct modifications of the optical absorption spectrum. Time-resolved fluorescence study confirmed that the common origin of these diverse behaviors lies in complexation of the metal ions by fullerene-derived carbon layers, even though further studies are required for a complete explanation of the involved processes. Nonetheless, the different response of fluorescence and optical absorbance towards distinct cationic species makes it possible to discriminate between the presence of Cu²⁺, Pb²⁺, Cd²⁺, and As(III), through two simple optical measurements. To this end, the use of a three-dimensional calibration plot is discussed. This property makes fullerene-derived nanoparticles a promising material in view of the implementation of a selective, colorimetric/fluorescent detection system.

Laser-Plasma Driven Synthesis of Carbon-Based Nanomaterials

In this paper we introduce a laser-plasma driven method for the production of carbon based nanomaterials and in particular bi- and few-layers of Graphene. This is obtained by using laser-plasma exfoliation of amorphous Graphite in a liquid solution, employing a laser with energy in the order of 0.5 J/mm². Raman and XPS analysis of a carbon colloidal performed at different irradiation stages indicate the formation of Graphene multilayers with an increasing number of layers: the amount of layers varies from a monolayer obtained in the first few seconds of the laser irradiation, up to two layers obtained after 10 s, and finally to Graphite and amorphous carbon obtained after 40 s of irradiation. The obtained colloidals are pure, without any presence of impurities or Graphene oxides, and can easily be deposited onto large surfaces (in the order of cm²) for being characterized or for being used in diverse applications.

Control of the size and density of ZnO-nanorods grown onto graphene nanoplatelets in aqueous suspensions

Zinc oxide nanorods with controlled density and size and high chemical purity were grown onto unsupported graphene nanoplatelets in aqueous suspension.