Changes in soil microbial biomass and organic C pools improve the sustainability of perennial grass and legume system under organic nutrient management

Introduction

The perennial grass-legume cropping system benefits soil because of its high biomass turnover, cover cropping nature, and different foraging behaviors. We investigated the response of soil organic carbon (SOC) pools and their stock to organic and inorganic nutrient management in the Guinea grass and legume (cowpea-Egyptian clover) cropping system.

Methods

Depth-wise soil samples were collected after harvesting the Egyptian clover. Based on the ease of oxidation with chromic acid, different pools of SOC oxidizable using the Walkley-Black C method, very labile, labile, less labile, non-labile; and dissolved organic C (DOC), microbial biomass C (MBC), and total organic C (TOC) in soils were analyzed for computing several indices of SOC.

Result and discussion

After 10 years of crop cycles, FYM and NPKF nutrient management recorded greater DOC, MBC, SOC stocks, and C sequestration than the NPK. Stocks of all SOC pools and carbon management index (CMI) decreased with soil depth. A significant improvement in CMI, stratification ratio, sensitivity indices, and sustainable yield index was observed under FYM and NPKF. This grass-legume intercropping system maintained a positive carbon balance sequestered at about 0.8Mg C ha^-1 after 10 years without any external input. Approximately 44-51% of the applied carbon through manure was stabilized with SOC under this cropping system. The DOC, MBC, and SOC in passive pools were identified for predicting dry fodder yield. This study concludes that the application of organics in the perennial grass-legume inter cropping system can maintain long-term sustainability, enhance the C sequestration, and offset the carbon footprint of the farm enterprises.

Ultrasonic Irradiation Enables Facile Production of Lovastatin from Sugar Cane Bagasse

This study investigated the effect of ultrasound-assisted hydrogen peroxide (H₂O₂) pretreatment on sugar cane bagasse (SCB) followed by Monascus purpureus TISTR 3003 cultivation for lovastatin production under solid-state fermentation (SSF). Optimization of the pretreatment conditions was investigated using a response surface methodology (RSM). Within the range of the selected operating conditions, the optimized values of H₂O₂ concentration, amplitude, SCB dosage, and sonication time were found to be 2.74%, 83.22 μm, 2.84% and 52.29 min, respectively. The R ² value of 0.9749 indicated that the fitted model is in good agreement with the predicted and actual lovastatin production. On the basis of the optimum conditions, the lovastatin production was 2347.10 ± 17.19 μg/g, which is 2.4 times higher than that under untreated conditions. Scanning electron microscopy (SEM) analysis explored the surface structure of the untreated SCB, which showed a compact rigid structure. In contrast, treated SCB had a rough surface structure and cracks as a result of the pretreatment.

Intensification of alkaline delignification of sugarcane bagasse using ultrasound assisted approach

Ultrasound-assisted approach has been investigated for delignification so as to develop green and sustainable technology. Combination of NaOH with ultrasound has been applied with detailed study into effect of various parameters such as time (operating range of 15-90 min), alkali concentration (0.25 M-2.5 M), solvent loading (1:15-1:30 w/v), temperature (50-90 ˚C), power (40-140 W) and duty cycle (40-70 %) at fixed frequency of 20 kHz. The optimized operating conditions established for the ultrasonic horn were 1 M as the NaOH concentration, 1 h as treatment time, 70˚C as the operating temperature, 1:20 as the biomass loading ratio, 100 W as the ultrasonic power and 70% duty cycle yielding 67.30% as the delignification extent. Comparative study performed using conventional and ultrasonic bath assisted alkaline treatment revealed lower delignification as 48.09% and 61.55% respectively. The biomass samples were characterized by SEM, XRD, FTIR and BET techniques to establish the role of ultrasound during the treatment. The morphological changes based on the ultrasound treatment demonstrated by SEM were favorable for enhanced delignification and also the crystallinity index was more in the case of ultrasound treated material than that obtained by conventional method. Specific surface area and pore size determinations based on BET analysis also confirmed beneficial role of ultrasound. The overall results clearly demonstrated the intensification obtained due to the use of ultrasonic reactors.