A Green Approach for the Synthesis of Coconut Husk Ash –Twisted Graphene Nanocomposites: Novel Catalysts for Solvent‐Free Biginelli Reaction

Design of an efficient magnetic brush solid acid and its catalytic use in organic reactions

In this research, with the Green Chemistry approach, to load more sulfonic acid active sites on catalyst surfaces, a nanocomposite material based on core-shell magnetite coated with vinyl silane and a sulfonated polymeric brush-like structure is designed and synthesized as a new class of efficient solid acid catalysts, referred to as Fe3O4@VS-APS brush solid acid. The synthesized catalyst was comprehensively characterized by a range of instrumental techniques, including XRD, SEM, TEM, FT-IR, EDX, TGA, and VSM. The activity of the catalyst was evaluated in Biginelli, Strecker, and esterification reactions. The Fe3O4@VS-APS brush solid acid has special features, such as easy reusability when a simple magnet is used for four reaction runs, an appropriate balance between hydrophobic and hydrophilic properties on the catalyst surface, and effective catalytic performance in the production of 3,4-dihydropyrimidin-2-one(thione) derivatives, 2-phenyl-2-(phenylamino)acetonitrile and octyl acetate.

Magnetic BiFeO3 nanoparticles: a robust and efficient nanocatalyst for the green one-pot three-component synthesis of highly substituted 3,4-dihydropyrimidine-2(1H)-one/thione derivatives

In this research, magnetic bismuth ferrite nanoparticles (BFO MNPs) were prepared through a convenient method and characterized. The structure and morphological characteristics of the prepared nanomaterial were confirmed through analyses using Fourier-transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), elemental mapping, powder X-ray diffraction (XRD), N2 adsorption-desorption isotherms and vibrating sample magnetometry (VSM) techniques. The obtained magnetic BFO nanomaterial was investigated, as a heterogeneous Lewis acid, in three component synthesis of 3,4-dihydropyrimidin-2 (1H)-ones/thiones (DHPMs/DHPMTs). It was found that the BFO MNPs exhibit remarkable efficacy in the synthesis of various DHPMs as well as their thione analogues. It is noteworthy that this research features low catalyst loading, good to excellent yields, environmentally friendly conditions, short reaction time, simple and straightforward work-up, and the reusability of the catalyst, distinguishing it from other recently reported protocols. Additionally, the structure of the DHPMs/DHPMTs was confirmed through 1H NMR, FTIR, and melting point analyses. This environmentally-benign methodology demonstrates the potential of the catalyst for more sustainable and efficient practices in green chemistry.

Fabrication of a Biomass-Derived Activated Carbon-Based Anode for High-Performance Li-Ion Batteries

Porous carbons are highly attractive and demanding materials which could be prepared using biomass waste; thus, they are promising for enhanced electrochemical capacitive performance in capacitors and cycling efficiency in Li-ion batteries. Herein, biomass (rice husk)-derived activated carbon was synthesized via a facile chemical route and used as anode materials for Li-ion batteries. Various characterization techniques were used to study the structural and morphological properties of the prepared activated carbon. The prepared activated carbon possessed a carbon structure with a certain degree of amorphousness. The morphology of the activated carbon was of spherical shape with a particle size of ~40-90 nm. Raman studies revealed the characteristic peaks of carbon present in the prepared activated carbon. The electrochemical studies evaluated for the fabricated coin cell with the activated carbon anode showed that the cell delivered a discharge capacity of ~321 mAhg^-1 at a current density of 100 mAg^-1 for the first cycle, and maintained a capacity of ~253 mAhg^-1 for 400 cycles. The capacity retention was found to be higher (~81%) with 92.3% coulombic efficiency even after 400 cycles, which showed excellent cyclic reversibility and stability compared to commercial activated carbon. These results allow the waste biomass-derived anode to overcome the problem of cyclic stability and capacity performance. This study provides an insight for the fabrication of anodes from the rice husk which can be redirected into creating valuable renewable energy storage devices in the future, and the product could be a socially and ethically acceptable product.

Synthesis, characterization, and photocatalytic activity of ZnO nanoparticles using water extract of waste coconut husk

The present work reports the use of natural alkaline extract from coconut husk ash as a precipitating agent for metal oxide nanoparticles synthesis. The abundance of K₂O and K₂CO₃ in it makes the extract highly basic and could be the alternative source of basic media in the laboratory. In this study, highly photoactive zinc oxide nanoparticles have been synthesized using water extract of waste coconut husk ash in a green approach which is considered as replacement of homogeneous base like NaOH and KOH. The formation of zinc oxide nanoparticles at different pH of the solution of coconut husk ash was confirmed through powder XRD, BET, SEM-EDX, UV-Vis, FTIR, and photoluminescence spectroscopy. The photocatalytic performance of the samples was evaluated through the degradation of methylene blue (MB) and methyl orange (MO) under solar irradiation which undergo degradation around 97% and 68% within 120 min, respectively. The high photocatalytic activity and rate constant could be attributed to the large surface area due to small particle size that could provide quicker photon absorption and reduction of charge carrier recombination. This current work introduces a new method to reduce energy consumption for the synthesis of highly photoactive low-cost zinc oxide nanoparticles.

Sulfonated carbons from agro-industrial residues: simple and efficient catalysts for the Biginelli reaction

An eco-friendly catalyst prepared from rice husk was used to synthesize dihydropyrimidinones (DHPMs) and achieved a yield of 92%.

Waste-to-wealth transition: application of natural waste materials as sustainable catalysts in multicomponent reactions

Application of natural waste materials as sustainable catalysts in multicomponent reactions.

Novel cost-effective synthesis of non-doped turbostratic graphene from a graphite intercalation compound: development of a durable and stable electrocatalyst for the oxygen reduction reaction

A cost-effective novel preparation of turbostratic graphene and its efficient use as an electrocatalyst for the oxygen reduction reaction is presented here.

Niobium Oxides as Heterogeneous Catalysts for Biginelli Multicomponent Reaction

This study reports a simple, reusable, and recoverable niobium-based heterogeneous catalysts for Biginelli multicomponent reactions. Different methods of catalysts preparation were investigated. For this purpose, HY-340 (Nb₂O₅·nH₂O) and Nb₂O₅ were chemically and/or thermally treated and investigated as catalysts for dihydropyrimidinones (DHPMs) production. The catalysts were characterized by scanning electron microscopy, high-resolution transmission electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, temperature-programmed desorption of NH₃, adsorption/desorption of N₂ at -196 °C, and thermogravimetric and differential thermal analysis. The characterization results showed that niobium oxides have the potential to be used as catalysts because of high crystallinity and large surface area. Among the tested catalysts, Nb₂O₅ chemically treated (Nb₂O₅/T) showed the best catalytic performance. In the absence of solvents, 94% yield of DHPMs was achieved. Also, Nb₂O₅/T can be reused three times without a significant yield decrease. Additionally, a feasible reaction pathway was suggested based on the Knoevenagel mechanism for DHPM synthesis using niobium-based catalysts.