12‐Tungstosilicic Acid H 4 [W 12 SiO 40 ] Over Natural Bentonite as a Heterogeneous Catalyst for the Synthesis of 3,4‐dihydropyrimidin‐2(1H)‐Ones

Synthesis of 4H-pyrimido[2,1-b]benzimidazoles catalyzed by a Schiff base cobalt(ii) complex supported on cobalt ferrite magnetite nanoparticles

Nano-[CoFe2O4@SiO2/propyl-1-(o-vanillinaldimine)][CoCl2] was designed and reported with the Schiff base cobalt(ii) complex anchored onto cobalt ferrite magnetite nanoparticles. The resulting nanomagnetite Schiff base cobalt(ii) complex was employed as a recoverable catalyst for the condensation reaction of aryl aldehyde, 2-aminobenzimidazole and ethyl acetoacetate at 90 °C to synthesize 4H-pyrimido[2,1-b]benzimidazoles under solvent-free condition. According to the proposed mechanism, the cobalt complex can accelerate the reaction via a structural rearrangement from a tetrahedral to a square planar geometry.

Synergistic effects of covalently coupled eosin-Y with Ben-graphitic carbon nitride framework for improved photocatalytic activity in solar light-driven Biginelli product generation and NADH regeneration

Elevated global pollution level is the prime reason that contributes to the onset of various harmful health diseases. The products of Biginelli reaction are enormously used in the pharmaceutical industry as they have antiviral, antibacterial, and calcium channel modulation abilities. This work reports a novel eosin Y sensitized boron graphitic carbon nitride (EY-Ben-g-C3N4) as a photocatalyst that efficiently produced 3,4-dihydropyrimidine-2-(1H)-one by the Biginelli reaction of benzaldehyde, urea, and methyl acetoacetate. The photocatalyst EY-Ben-g-C3N4 showed a successful generation of 3,4-dihydropyrimidine-2-(1H)-one (Biginelli product) in good yield via photocatalysis which is an eco-friendly method and has facile operational process. In addition to the production of Biginelli products, the photocatalyst also showed a remarkable NADH regeneration of 81.18%. The incorporation of g-C3N4 with boron helps increase the surface area and the incorporation of eosin Y which is an inexpensive and non-toxic dye, and in Ben-g-C3N4, enhanced the light-harvesting capacity of the photocatalyst. The production of 3,4-dihydropyrimidine-2-(1H)-one and NADH by the EY-Ben-g-C3N4 photocatalyst is attributed to the requisite band gap, high molar absorbance, low rate of charge recombination, and increased capacity of the photocatalyst to harvest solar light energy.

Halogenated dicyanobenzene-based photosensitizer (3DPAFIPN) as a thermally activated delayed fluorescence (TADF) used in gram-scale photosynthesis 3,4-dihydropyrimidin-2-(1H)-one/thione derivatives via a consecutive visible-light-induced electron-transfer pathway

Background: Organic dyes often have shorter lifetimes in the excited state, which is a major obstacle to the development of effective photoredox methods. The scientific community has shown a great deal of interest in a certain class of organic chromophores because of their unique characteristics and effectiveness. One characteristic of the molecules under research is thermally activated delayed fluorescence (TADF), which is only observed in molecules with a tiny energy gap (often less than 0.2 eV) between their lowest two excited states, i.e., singlet excited state (S1) and triplet excited state (T1). The extended singlet excited states arising from TADF and the simplicity with which their redox potentials may be altered make the isophthalonitrile family of chromophores an attractive option for organic photocatalyst applications. Methods: The Biginelli reaction between β-ketoesters, arylaldehydes, and urea/thiourea has been used to build a sustainable technique for the production of 3,4-dihydropyrimidin-2-(1H)-one/thione derivatives. In the present study, the development of a green radical synthesis approach for this class of compounds is addressed in depth. As a photocatalyst, a new halogenated dicyanobenzene-based photosensitizer was employed in this study. As a renewable energy source activated by a blue LED, it was dissolved in ethanol, at room temperature in air atmosphere. The primary objective of this research is to employ a novel donor-acceptor (D-A) based on halogenated cyanoarene that is affordable, easily available, and innovative. Findings: The 3DPAFIPN [2,4,6-tris(diphenylamino)-5-fluoroisophthalonitrile] photocatalyst, a thermally activated delayed fluorescence (TADF), induces single-electron transfer (SET) in response to visible light, offering a straightforward, eco-friendly, and highly efficient process. Additionally, we determined the 3,4-dihydropyrimidin-2-(1H)-one/thione derivatives turnover frequency (TOF) and turnover number (TON). It has also been demonstrated that gram-scale cyclization is a workable method for industrial purposes.

Clay based heterogeneous catalysts for carbon-nitrogen bond formation: a review

Clay and modified clay-based catalysts are widely used in organic transformation. Owing to the interlayer ions and good ion exchange capacity of clay, replacement with another ion and incorporation of different nanomaterials can be done. Due to these significant properties of clay, it can be utilized in the synthesis of various organic compounds. Carbon-nitrogen bonded compounds possess diverse applications in different fields. These compounds are prepared using different solid acid heterogeneous catalysts. This review presents a detailed discussion on clay used for the carbon-nitrogen bond formation reaction, such as the Biginelli reaction and A3 and KA2 coupling reactions. Additionally, other C-N bond formation reactions using various clay-based catalysts such as bentonite, montmorillonite, hydrotalcite and halloysite clay with various metals, metal oxides, Kegging type heteropoly acid and various nanomaterial incorporated clay heterogeneous catalysts are discussed.

Recyclable photocatalyst perovskite as a single-electron redox mediator for visible-light-driven photocatalysis gram-scale synthesis of 3,4-dihydropyrimidin-2-(1H)-ones/thiones in air atmosphere

Based on the Biginelli reaction of β-ketoesters, arylaldehydes, and urea/thiourea, we created a green radical synthesis procedure for 3,4-dihydropyrimidin-2-(1H)-ones/thiones. A single-electron redox mediator was applied to a solution of ethanol in an air environment, at room temperature, and with blue LEDs as a renewable energy source in order to create. The objective of this research is to create a halide perovskite that is widely available, affordable, recyclable, and economically feasible. A factor mentioned in the discussion is that the procedure tolerates a variety of donating and withdrawing functional groups while still offering a very fast rate and excellent yields. The range of yields is quite uniform (86-94%, average: 90.4%), and the range of reaction times is very quick (4-8 min, average: 5.8 min). Furthermore, gram-scale cyclization shows that it is applicable for use in industry. Additionally, CsPbBr₃ is quite stable and can be used six times in a row without experiencing significant structural changes or activity loss, which has been extremely helpful in meeting industrial needs and environmental issues.

Carbazole-based photocatalyst (4CzIPN) for novel donor-acceptor (D-A) fluorophore-catalyzed visible-light-induced photosynthesis of 3,4-dihydropyrimidin-2-(1H)-ones/thiones via a proton-coupled electron transfer (PCET) process

Based on the Biginelli reaction of β-ketoesters, arylaldehydes, and urea/thiourea, we created a green radical synthesis procedure for 3,4-dihydropyrimidin-2-(1H)-ones/thiones. A PCET (proton-coupled electron transfer) photocatalyst was used in an ethanol solution in an air environment and at room temperature and visible light to provide a renewable energy source. In this study, we seek to create a novel donor-acceptor (D-A) fluorophore that is affordable and widely available. The carbazole-based photocatalyst (4CzIPN), in addition to its time-saving capabilities and simplicity of use, exhibits excellent yields, is energy-efficient, and is ecologically friendly. This makes it possible to track the evolution of environmental and chemical factors throughout time. To determine the turnover number (TON) and turnover frequency (TOF) of 3,4-dihydropyrimidin-2-(1H)-ones/thiones, a study was done. Gram-scale cyclization demonstrates that it may be used in industry effectively.

Mild Acidic Charcoal Catalyzed Synthesis of 3,4-dihydropyrimidin-2(1H)-one/-thione Derivatives

A green and efficient method for the multicomponent synthesis of 3,4-dihydropyrimidin-2(1H)-ones and -thiones using acetic acid supported on activated charcoal as a mild acid catalyst in ethanol under both conventional as well as microwave irradiation conditions has been developed. The catalyst system found more efficient under microwave irradiation conditions than conventional conditions with shorter reaction times and excellent yields.

Efficient Synthesis of Dihydropyrimidines Using a Highly Ordered Mesoporous Functionalized Pyridinium Organosilica

A Brönsted acidic ionic solid pyridinium-functionalized organosilica network (PMO-Py-IL) was demonstrated to efficiently catalyse one-pot Biginelli condensation reaction. The green synthesis of 3,4-dihydro-2(H)-pyrimidinones (DHPMs) with high yield was carried out via one-pot three component condensation of β- dicarbonyls, aldehydes, and urea in the presence of a catalytic amount of PMO-Py-IL nanomaterial as an efficient nanocatalyst under solvent free conditions. Furthermore, the catalyst showed outstanding stability and could be easily separated and reused for at least ten reaction runs without significant loss of activity and product selectivity. The green protocol features simple set-up, cost-effectiveness, easy work-up, eco-friendly and mild reaction conditions.

Visible-Light-Induced Radical Condensation Cyclization to Synthesize 3,4-Dihydropyrimidin-2-(1H)-ones/thiones Using Photoexcited Na2 Eosin Y as a Direct Hydrogen Atom Transfer (HAT) Catalyst

The data suggests that Na2 eosin Y-derived photoinduced states act as a HAT catalyst for the synthesis of 3,4-dihydropyrimidin-2-(1H)-ones/thiones in ethanol at room temperature. This research establishes a novel function for using a nonmetallic natural dye, Na2 eosin Y, available commercially and at a cheap cost in the photochemical synthesis using the least amount of catalyst, obtaining good results, speeding up the process, and achieving a high atom economy. The TON and TOF of 3,4-dihydropyrimidin-2-(1H)-ones/thiones are computed. Furthermore, this cycle runs on the gram scale as well, indicating the possibility of industrial purposes.

Modification of bentonite clay & its applications: a review

Bentonite clay is one of the oldest clays that humankind has been using from ancient times as traditional habits and remedies. In recent years researchers have found many applications of bentonite clay due to its various physio-chemical properties. In the present work, various physical and chemical properties of bentonite such as surface area, adsorption, swelling properties, cation exchange properties, etc. have been studied. This study also includes various procedures of modification of bentonite clay into Chitosan/Ag-bentonite composite, Fe-Modified bentonite, Hydroxyl-Fe-pillared-bentonite, Organo Bentonite, Organophilic clay, Arenesulfonic Acid-Functionalized Bentonite, Bentonite clay modified with Nb2O5. The study reveals that bentonite clay has large surface area due to similar structure with montmorillonite and it is found that the functionality of bentonite can be increased by increasing total surface area of the clay. Due to high cation exchangeability of bentonite, various cations can be incorporated into it. After purification and modification, the absorbent aluminum phyllosilicate bentonite clay can be used as an efficient catalyst in various types of catalytic reactions. Moreover, bentonite clay can be applied in various field like drilling, civil engineering, agriculture and water treatment.

Synthesis of dihydropyrimidinones via multicomponent reaction route over acid functionalized Metal-Organic framework catalysts

Multi component reactions over heterogeneous solid acid catalysts are extremely important owing to easy separation, amenable recycling, and prospective scaling up of the process. Here, we are reporting the synthesis of biologically important dihydropyrimidinones over postsynthetic modified Cr-based metal-organic framework materials as heterogeneous catalysts containing the bifunctional Lewis and Brønsted acid sites. Cr-based metal-organic frameworks contained coordinatively unsaturated metal sites as inherent Lewis acid sites, whereas postsynthetic modifications introduced the Brønsted acid sites in the framework. A direct one pot synthesis route was employed to produce the pristine MOF in pure aqueous medium without using any additives. The bulk structure, morphology, surface and bonding properties of the synthesized materials were thoroughly characterized with powder XRD, FTIR, XPS, FE-SEM, TGA, and N₂ sorption isotherms. A qualitative evolution of acid strength was carried out over the functionalized MOFs. Among the post synthetic functionalized materials, carboxylic acid functionalized framework exhibited a very high yield of dihydropyrimidinones under solvent less moderate reaction conditions. The catalyst also demonstrated a robust recyclability and wide substrate scope. Comparative study showed a very high catalytic activity of the postsynthetic modified MOFs in comparison to the reported literature. The reaction condition was optimized by varying parameters like solvent, temperature, reaction duration and catalyst loadings. The mechanistic studies indicated the involvement of both the Lewis and Brønsted sites acid sites of the catalysts in the multicomponent reaction.

Incorporation of Keggin-based H3PW7Mo5O40 into bentonite: synthesis, characterization and catalytic applications

The Keggin-based molybdo-substituted tungstophosphoric acid, H3[PW7Mo5O40]·12H2O, were synthesized and incorporated with a bentonite clay by using a wetness impregnation method. The catalysts were characterized using several methods, such as inductively coupled plasma-atomic emission spectroscopy (ICP-AES), Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometry (XRD), scanning electron microscopy energy-dispersive X-ray spectroscopy (SEM-EDS), transmission electron microscopy (TEM), and thermogravimetric and differential thermal analysis (TG-DTA). This extremely active catalytic system provides a green strategy for the synthesis of 1,8-dioxo-octahydroxanthene and 1,8-dioxo-decahydroacridine derivatives under solvent free conditions at 80 °C with a good reaction mass efficiency, effective mass yield, and excellent atom economy. Both the surface acidity and catalytic activity sharply increased after H3[PW7Mo5O40]·12H2O was impregnated with bentonite clay. In addition, the PW7Mo5/bentonite catalyst can be conveniently recovered and reused numerous times without demonstrating a significant loss in activity.

Recent Applications of Heteropolyacids and Related Compounds in Heterocycle Synthesis. Contributions between 2010 and 2020

Over the past two decades, polyoxometalates (POM) have received considerable attention as solid catalysts, due to their unique physicochemical characteristics, since, first, they have very strong Bronsted acidity, approaching the region of a superacid, and second, they are efficient oxidizers that exhibit rapid redox transformations under fairly mild conditions. Their structural mobility is also highlighted, since they are complex molecules that can be modified by changing their structure or the elements that compose them to model their size, charge density, redox potentials, acidity, and solubility. Finally, they can be used in substoichiometric amounts and reused without an appreciable loss of catalytic activity, all of which postulate them as versatile, economic and ecological catalysts. Therefore, in 2009, we wrote a review article highlighting the great variety of organic reactions, mainly in the area of the synthesis of bioactive heterocycles in which they can be used, and this new review completes that article with the contributions made in the same area for the period 2010 to 2020. The synthesized heterocycles to be covered include pyrimidines, pyridines, pyrroles, indoles, chromenes, xanthenes, pyrans, azlactones, azoles, diazines, azepines, flavones, and formylchromones, among others.

Tungsten-substituted molybdophosphoric acid impregnated with kaolin: effective catalysts for the synthesis of 3,4-dihydropyrimidin-2(1H)-ones via biginelli reaction

A series of highly reusable heterogeneous catalysts (10-25 wt% PMo7W5/kaolin), consisting of tungsten-substituted molybdophosphoric acid, H3PMo7W5O40·24H2O (PMo7W5) impregnated with acid treated kaolin clay was synthesized by the wetness impregnation method. The newly synthesized catalyst was fully characterized using inductively coupled plasma-atomic emission spectroscopy (ICP-AES), Fourier transform infrared (FT-IR), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) analysis and thermal analysis (TG-DTA). The synthesized materials were shown to be efficient in the synthesis of 3,4-dihydropyrimidin-2(1H)-ones via Biginelli reaction under solvent-free conditions. The obtained results indicate that 20% PMo7W5/kaolin catalyst showed remarkably enhanced catalytic activity compared to the bulk PMo7W5 catalyst, and also the (10 and 15%) PMo7W5 catalyst supported on kaolin clay.

Deep eutectic solvent assisted synthesis of dihydropyrimidinones/thiones via Biginelli reaction: theoretical investigations on their electronic and global reactivity descriptors

DES 2 (ZrOCl2·8H2O-ethylene glycol at 1 : 2 ratio) was used as a catalyst for the synthesis of dihydropyrimidinones/thiones via a Biginelli reaction.