Highly active metastable ruthenium nanoparticles for hydrogen production through the catalytic hydrolysis of ammonia borane

Chemistry and microstructure of C-supported Ru catalyst nanoparticles: A correlative study

Ru@Pt core shell nanoparticles possess optimal catalytic properties that facilitate the anodic oxidation reaction of H2 with decreased Pt loading in hydrogen fuel cells. Moreover, since they preferentially oxidize CO, Pt poisoning is considerably reduced, which significantly improves the stability of the cell. The Ru cores used in this system are usually synthesized by dissolving a RuCl3*H2O precursor in an ethylene glycol-carbon black-NaOH mixture. However, the possibility that remnant Cl and Na from the synthesis process are present in the Ru nanoparticles has not been extensively studied. Therefore, due to the challenges in detecting impurities with traditional characterization methods, here correlative atom probe tomography (APT) with scanning transmission electron microscopy ((S)TEM) techniques were implemented. The capabilities of APT to obtain chemical information with high sensitivity at the nanoscale, in combination with the high spatial resolving power of (S)TEM, provide the necessary resolution to fully characterize the structure and chemical makeup of Ru nanoparticles.

Reducible tungsten(VI) oxide-supported ruthenium(0) nanoparticles: highly active catalyst for hydrolytic dehydrogenation of ammonia borane

Reducible WO3 powder with a mean diameter of 100 nm is used as support to stabilize ruthenium(0) nanoparticles. Ruthenium(0) nanoparticles are obtained by NaBH4 reduction of ruthenium(III) precursor on the surface of WO3 support at room temperature. Ruthenium(0) nanoparticles are uniformly dispersed on the surface of tungsten(VI) oxide. The obtained Ru0/WO3 nanoparticles are found to be active catalysts in hydrolytic dehydrogenation of ammonia borane. The turnover frequency (TOF) values of the Ru0/WO3 nanocatalysts with the metal loading of 1.0%, 2.0%, and 3.0% wt. Ru are 122, 106, and 83 min-1, respectively, in releasing hydrogen gas from the hydrolysis of ammonia borane at 25.0 °C. As the Ru0/WO3 (1.0% wt. Ru) nanocatalyst with an average particle size of 2.6 nm provides the highest activity among them, it is extensively investigated. Although the Ru0/WO3 (1.0% wt. Ru) nanocatalyst is not magnetically separable, it has extremely high reusability in the hydrolysis reaction as it preserves 100% of initial catalytic activity even after the 5th run of hydrolysis. The high activity and reusability of Ru0/WO3 (1.0% wt. Ru) nanocatalyst are attributed to the favorable metal-support interaction between the ruthenium(0) nanoparticles and the reducible tungsten(VI) oxide. The high catalytic activity and high stability of Ru0/WO3 nanoparticles increase the catalytic efficiency of precious ruthenium in hydrolytic dehydrogenation of ammonia borane.

Efficient visible-light-driven S-scheme AgVO3/Ag2S heterojunction photocatalyst for boosting degradation of organic pollutants

The traditional semiconductor photocatalysts for solving the related environmental aggravation are often challenged by the recombination of photogenerated carriers. Designing an S-scheme heterojunction photocatalyst is one of the keys to tackling its practical application problems. This paper reports an S-scheme AgVO₃/Ag₂S heterojunction photocatalyst constructed via a straightforward hydrothermal approach that exhibits outstanding photocatalytic degradation performances to the organic dye Rhodamine B (RhB) and antibiotic Tetracycline hydrochloride (TC-HCl) driven by visible light. The results show that AgVO₃/Ag₂S heterojunction with a molar ratio of 6:1 (V6S) possesses the highest photocatalytic performances, 99% of RhB can be almost degraded by 0.1 g/L V6S within 25 min light illumination, and about 72% of TC-HCl can be photodegraded with the act of 0.3 g/L V6S under 120 min light irradiation. Meanwhile, the AgVO₃/Ag₂S system exhibits superior stability and maintains high photocatalytic activity after 5 repeated tests. Moreover, the EPR measurement and radical capture test identify that superoxide radicals and hydroxyl radicals mainly contribute to the photodegradation process. The present work demonstrates that constructing an S-scheme heterojunction can effectively inhibit the recombination of carriers, providing insights into the fabrication of applied photocatalysts for practical wastewater purification treatment.

Recent Advances and Perspectives on Supported Catalysts for Heterogeneous Hydrogen Production from Ammonia Borane

Ammonia borane (AB), a liquid hydrogen storage material, has attracted increasing attention for hydrogen utilization because of its high hydrogen content. However, the slow kinetics of AB hydrolysis and the indefinite catalytic mechanism remain significant problems for its large-scale practical application. Thus, the development of efficient AB hydrolysis catalysts and the determination of their catalytic mechanisms are significant and urgent. A summary of the preparation process and structural characteristics of various supported catalysts is presented in this paper, including graphite, metal-organic frameworks (MOFs), metal oxides, carbon nitride (CN), molybdenum carbide (MoC), carbon nanotubes (CNTs), boron nitride (h-BN), zeolites, carbon dots (CDs), and metal carbide and nitride (MXene). In addition, the relationship between the electronic structure and catalytic performance is discussed to ascertain the actual active sites in the catalytic process. The mechanism of AB hydrolysis catalysis is systematically discussed, and possible catalytic paths are summarized to provide theoretical considerations for the designing of efficient AB hydrolysis catalysts. Furthermore, three methods for stimulating AB from dehydrogenation by-products and the design of possible hydrogen product-regeneration systems are summarized. Finally, the remaining challenges and future research directions for the effective development of AB catalysts are discussed.

Moiré Superlattice Structure in Two-Dimensional Catalysts: Synthesis, Property and Activity

Two-dimensional (2D) layered materials have been widely used as catalysts due to their high specific surface area, large fraction of uncoordinated surface atoms, and high charge carrier mobility. Moiré superlattice emerges in 2D layered materials with twist angle or lattice mismatch. By manipulating the moiré superlattice structure, 2D layered materials present modulated electronic band structure, topological edge states, and unconventional superconductivity which are tightly associated with the performance of catalysts. Hence, engineering moiré superlattice structures are proposed to be an important technology in modifying 2D layered materials for improved catalytic properties. However, currently, the investigation of moiré superlattice structure in a catalytic application is still in its infancy. This perspective starts with the discussion of structural features and fabrication strategy of 2D materials with moiré superlattice structure. Afterward, the catalytic applications, including electrocatalytic and photocatalytic applications, are summarized. In particular, the promotion mechanism of the catalytic performance caused by the moiré superlattice structure is proposed. Finally, the perspective is concluded by outlining the remaining challenges and possible solutions for the future development of 2D materials with moiré superlattice structure towards the catalytic applications.

Formation and selected catalytic properties of ruthenium, rhodium, osmium and iridium nanoparticles

The synthesis and applications in catalysis of nanoparticles formed from ruthenium, rhodium, osmium and iridium have been reviewed.

Phase Control of Noble Monometallic and Alloy Nanomaterials by Chemical Reduction Methods

In recent years, the phase control of monometallic and alloy nanomaterials has attracted great attention because of the potential to tune the physical and chemical properties of these species. In this Review, an overview of the latest research progress in phase-controlled monometallic and alloy nanomaterials is first given. Then, the phase-controlled synthesis using a chemical reduction method are discussed, and the formation mechanisms of these nanomaterials are specifically highlighted. Lastly, the challenges and future perspectives in this new research field are discussed.

The solvent determines the product in the hydrogenation of aromatic ketones using unligated RhCl3 as catalyst precursor

RhCl3-catalysed hydrogenation/hydrodeoxygenation of aromatic ketones produced alkylcyclohexanes in TFE and cyclohexyl alkyl alcohols in water at moderate temperatures. Rh-nanoparticles were found to be the true catalysts.

Recent Advances in Noble Metal Catalysts for Hydrogen Production from Ammonia Borane

Interest in chemical hydrogen storage has increased, because the supply of fossil fuels are limited and the harmful effects of burning fossil fuels on the environment have become a focus of public concern. Hydrogen, as one of the energy carriers, is useful for the sustainable development. However, it is widely known that controlled storage and release of hydrogen are the biggest barriers in large-scale application of hydrogen energy. Ammonia borane (NH3BH3, AB) is deemed as one of the most promising hydrogen storage candidates on account of its high hydrogen to mass ratio and environmental benignity. Development of efficient catalysts to further improve the properties of chemical kinetics in the dehydrogenation of AB under appropriate conditions is of importance for the practical application of this system. In previous studies, a variety of noble metal catalysts and their supported metal catalysts (Pt, Pd, Au, Rh, etc.) have presented great properties in decomposing the chemical hydride to generate hydrogen, thus, promoting their application in dehydrogenation of AB is urgent. We analyzed the hydrolysis of AB from the mechanism of hydrogen release reaction to understand more deeply. Based on these characteristics, we aimed to summarize recent advances in the development of noble metal catalysts, which had excellent activity and stability for AB dehydrogenation, with prospect towards realization of efficient noble metal catalysts.

Ru nanoclusters confined in porous organic cages for catalytic hydrolysis of ammonia borane and tandem hydrogenation reaction

The fabrication of narrow-sized metal nanoclusters for heterogeneous catalysis has attracted widespread research attention. Nevertheless, it is still a significant challenge to fabricate highly dispersed metal-nanocluster-based catalysts with high activity and stability. In this study, 1,3,5-benzenetricarboxylate and 1,2-diaminocyclohexane were used as precursors to fabricate porous organic cages (POCs), CC3-R. CC3-R exhibited a high specific surface area and a microporous-mesoporous structure. In addition, ultrafine Ru nanoclusters were successfully encapsulated in CC3-R with high dispersion via impregnation and subsequent reduction, affording Ru nanoclusters with a precisely controlled size of ∼0.65 nm. As-obtained Ru(1.45%)@CC3-R exhibited significantly enhanced catalytic activities toward the hydrolysis of ammonia borane (AB) and exhibited high conversion and selectivity for the tandem hydrogenation of nitroarenes and hydrogenation of quinoline in water under mild conditions. In addition, the Ru(1.45%)@CC3-R catalyst exhibited high stability and good recyclability. This study should provide a novel strategy for fabricating highly dispersed ultrafine nanocluster-based catalysts for various catalysis applications.

Synergetic Effect of Ultrasmall Metal Clusters and Zeolites Promoting Hydrogen Generation

Taking advantage of the synergetic effect of confined ultrasmall metal clusters and zeolite frameworks is an efficient strategy for improving the catalytic performance of metal nanocatalysts. Herein, it is demonstrated that the synergetic effect of ultrasmall ruthenium (Ru) clusters and intrinsic Brønsted acidity of zeolite frameworks can significantly promote the hydrogen generation of ammonia borane (AB) hydrolysis. Ultrasmall Ru clusters are embedded onto the silicoaluminophosphate SAPO-34 (CHA) and various aluminosilicate zeolites (MFI, *BEA, and FAU) with tunable acidities by a facile incipient wetness impregnation method. Evidenced by high-resolution scanning transmission electron microscopy, the sub-nanometric Ru clusters are uniformly distributed throughout the zeolite crystals. The X-ray absorption spectroscopy measurements reveal the existence of Ru-H species between Ru clusters and adjacent Brønsted acid sites of zeolites, which could synergistically activate AB and water molecules, significantly enhancing the hydrogen evolution rate of AB hydrolysis. Notably, the Ru/SAPO-34-0.8Si (Si/Al = 0.8) and Ru/FAU (Si/Al = 30) catalysts with strong acidities afford high turnover frequency values up to 490 and 627 min-1, respectively. These values are more than a 13-fold enhancement than that of the commercial Ru/C catalyst, and among the top level over other heterogeneous catalysts tested under similar conditions.

Morphology evolution of fcc Ru nanoparticles under hydrogen atmosphere

Tuning the morphology and structural evolution of metal nanoparticles to expose specific crystal facets in a certain reaction atmosphere is conducive to designing catalysts with a high catalytic activity. Herein, coverage dependent hydrogen adsorption on seven fcc Ru surfaces was investigated using density functional theory (DFT) calculations. The morphology evolution of the fcc Ru nanoparticles under the reactive environment was further illustrated using the multiscale structure reconstruction (MSR) model, which combines the DFT results with the Fowler-Guggenheim (F-G) adsorption isotherm and the Wulff construction. At constant pressure, the shape of a fcc Ru nanoparticle changes from a rhombic dodecahedron to a truncated octahedron with an increase of the temperature. More importantly, the desired Ru morphology, with abundant open facets, was predicted to occur at a high temperature and low pressure. Our results provide an insightful understanding of the reshaping of Ru nanoparticles during real reactions, which is crucial for its rational design for use as a nanocatalyst.

Seed-assisted synthesis of fcc Ru–Cu bimetallic nanostructures and their catalytic properties for the hydrogen evolution reaction

Adjusting the chemical composition and/or crystal structures is an important approach to tune the activity of catalysts.

Surface and interface design for heterogeneous catalysis

Recent progresses in catalytic nanocrystals with uniform and well-defined structures, in situ characterization techniques, and theoretical calculations are facilitating the innovation of efficient catalysts via surface and interface designs, including crystal phase design, morphology/facet design, and size design, followed by controlled synthesis.

Size and shape-controlled synthesis of Ru nanocrystals

Mastery over the size/shape of nanocrystals (NCs) enables control of their properties and enhancement of their usefulness for a given application. Within the past decades, the development of wet-chemistry methods leads to the blossom of research in noble metal nanomaterials with tunable sizes and shapes. We herein would prefer to devote this chapter to introduce the solution-based methods for size and shape-controlled synthesis of ruthenium (Ru) NCs, which can be summarized into five categories: (i) Synthesis of spherical Ru NCs; (ii) synthesis of one-dimensional (1D) Ru NCs, e.g. wires and rods; (iii) synthesis of two-dimensional (2D) Ru NCs, e.g. nanoplates; (iv) synthesis of Ru NCs with hollow interiors and (v) synthesis of Ru NCs with other morphologies, e.g. chains, dendrites and branches. We aim at highlighting the synthetic approaches and growth mechanisms of these types of Ru NCs. We also introduce the detailed characterization tools for analysis of Ru NCs with different sizes/shapes. With respect to the creation of great opportunities and tremendous challenges due to the accumulation in noble metal nanomaterials, we briefly make some perspectives for the future development of Ru NCs so as to provide the readers a systematic and coherent picture of this promising field. We hope this reviewing effort can provide for technical bases for effectively designing and producing Ru NCs with enhanced physical/chemical properties.

Graphical Abstract:

Influence of the Water/Titanium Alkoxide Ratio on the Morphology and Catalytic Activity of Titania-Nickel Composite Particles for the Hydrolysis of Ammonia Borane

This work reports the influence of the water/titanium alkoxide ratio during the preparation of titania–nickel composite particles on their morphology and catalytic activity toward the hydrolysis of ammonia borane. The titania–nickel composite particle catalysts were fabricated by using a sol‐gel method, followed by an activation process in aqueous solution containing sodium borohydride and ammonia borane. From the scanning electron microscopy images and pore‐size distributions calculated from nitrogen sorption data, the particle dispersion was significantly enhanced at ratios above 6000, and increased with increasing water/titanium alkoxide ratio. Stoichiometric amounts of hydrogen were evolved in the presence of all of the prepared titania–nickel composite particle catalysts. The particle dispersion influenced the hydrogen evolution rate from aqueous ammonia borane solution, and the samples with the most highly dispersed particles showed the highest hydrogen evolution rate. The most active catalyst showed an apparent activation energy comparable to that of other reported catalysts and high cycle ability for the hydrolysis of ammonia borane.

Syntheses and Properties of Metal Nanomaterials with Novel Crystal Phases

In recent decades, researchers have devoted tremendous effort into the rational design and controlled synthesis of metal nanomaterials with well-defined size, morphology, composition, and structure, and great achievements have been reached. However, the crystal-phase engineering of metal nanomaterials still remains a big challenge. Recent research has revealed that the crystal phase of metal nanomaterials can significantly alter their properties, arising from the distinct atomic arrangement and modified electronic structure. Until now, it has been relatively uncommon to synthesize metal nanomaterials with novel crystal phases in spite of the fact that these nanostructures would be promising for various applications. Here, the research progress regarding the fine control of noble metal (Au, Ag, Ru, Rh, Pd) and non-noble metal (Fe, Co, Ni) nanomaterials with novel crystal phases is reviewed. First, synthesis strategies and their phase transformations are summarized, while highlighting the peculiar characteristics of each element. The phase-dependent properties are then discussed by providing representative examples. Finally, the challenges and perspectives in this emerging field are proposed.

Metal Ruthenate Perovskites as Heterogeneous Catalysts for the Hydrolysis of Ammonia Borane

Ammonia borane (NH3-BH3) is of interest as a hydrogen storage material because of its ease of use and its ability to release three molar equivalents of H2(g) via catalytic hydrolysis. Most heterogeneous catalysts for ammonia borane hydrolysis are nanoparticles containing expensive noble metals. Here, we show that metal ruthenate perovskites function as active and durable catalysts for ammonia borane hydrolysis. As a bulk powder, CaRuO3 catalyzes the hydrolysis of ammonia borane at room temperature and is recyclable and reusable. CaRuO3 facilitates the release of H2(g) from aqueous ammonia borane solutions at comparable rates to some other heterogeneous catalyst systems while having a low noble metal content. Other ruthenium-based perovskites, including SrRuO3, Ca2LaRuO6, Sr2CoRuO6, and SrLaCoRuO6, are similarly active catalysts for room-temperature ammonia borane hydrolysis.

One-step synthesis of magnetically recyclable Co@BN core–shell nanocatalysts for catalytic reduction of nitroarenes

The possible mechanism for Co@BN catalyzed 4-nitrophenol reduction in the presence of NaBH₄. Moreover, the 13.6 wt% Co@BN core–shell nanoparticles exhibited the excellent catalytic activity in hydrogenation of nitroaromatic compounds.

Magnetic, recyclable PtyCo1−y/Ti3C2X2 (X = O, F) catalyst: a facile synthesis and enhanced catalytic activity for hydrogen generation from the hydrolysis of ammonia borane

Magnetic recyclable Pt_yCo_1−y/Ti₃C₂X₂ (X = O, F) catalyst exhibits excellent catalytic performance for the hydrolysis of AB at room temperature.

MnCo2O4film composed of nanoplates: synthesis, characterization and its superior catalytic performance in the hydrolytic dehydrogenation of ammonia borane

MnCo₂O₄film composed of nanoplates as an active and reusable catalyst towards the hydrolysis of ammonia borane for hydrogen production.

Non-Noble-Metal Nanoparticle Supported on Metal-Organic Framework as an Efficient and Durable Catalyst for Promoting H2 Production from Ammonia Borane under Visible Light Irradiation

In this work, we propose a straightforward method to enhance the catalytic activity of AB dehydrogenation by using non-noble-metal nanoparticle supported on chromium-based metal-organic framework (MIL-101). It was demonstrated to be effective for hydrogen generation from ammonia borane under assistance of visible light irradiation as a noble-metal-free catalyst. The catalytic activity of metal nanoparticles supported on MIL-101 under visible light irradiation is remarkably higher than that without light irradiation. The TOFs of Cu/MIL-101, Co/MIL-101, and Ni/MIL-101 are 1693, 1571, and 3238 h(-1), respectively. The enhanced activity of catalysts can be primarily attributed to the cooperative promoting effects from both non-noble-metal nanoparticles and photoactive metal-organic framework in activating the ammonia borane molecule and strong ability in the photocatalytic production of hydroxyl radicals, superoxide anions, and electron-rich non-noble-metal nanoparticle. This work sheds light on the exploration of active non-noble metals supported on photoactive porous materials for achieving high catalytic activity of various redox reactions under visible light irradiation.

A Route for Phase Control in Metal Nanoparticles: A Potential Strategy to Create Advanced Materials

There is untapped potential for materials whose crystal structures are unobtainable in the bulk state. Several examples of such structures have been found in nanomaterials, and these materials exhibit unique properties that arise from their unique electronic states and surface structures. Here, recent developments in the syntheses of these nanomaterials and their unique properties, such as hydrogen-storage ability and catalytic activity, are summarized. Firstly, the syntheses and properties of novel solid-solution alloy nanoparticles in immiscible alloy systems such as Ag-Rh and Pd-Ru are introduced. Following this, the crystal structure control of nanoscale Ru is discussed. These unique alloy materials show enhanced properties and highlight the potential of phase control to be a new strategy for nanomaterial development.

Fabrication of a Ti-supported NiCo2O4nanosheet array and its superior catalytic performance in the hydrolysis of ammonia borane for hydrogen generation

A Ti-supported NiCo₂O₄nanosheet array exhibited high catalytic performance in the hydrolysis of ammonia borane for hydrogen generation.

Ruthenium nanoparticles confined in SBA-15 as highly efficient catalyst for hydrolytic dehydrogenation of ammonia borane and hydrazine borane

Ultrafine ruthenium nanoparticles (NPs) within the mesopores of the SBA-15 have been successfully prepared by using a “double solvents” method, in which n-hexane is used as a hydrophobic solvent and RuCl₃ aqueous solution is used as a hydrophilic solvent. After the impregnation and reduction processes, the samples were characterized by XRD, TEM, EDX, XPS, N₂ adsorption-desorption, and ICP techniques. The TEM images show that small sized Ru NPs with an average size of 3.0 ± 0.8 nm are uniformly dispersed in the mesopores of SBA-15. The as-synthesized Ru@SBA-15 nanocomposites (NCs) display exceptional catalytic activity for hydrogen generation by the hydrolysis of ammonia borane (NH₃BH₃, AB) and hydrazine borane (N₂H₄BH₃, HB) at room temperature with the turnover frequency (TOF) value of 316 and 706 mol H₂ (mol Ru min)⁻¹, respectively, relatively high values reported so far for the same reaction. The activation energies (E_a) for the hydrolysis of AB and HB catalyzed by Ru@SBA-15 NCs are measured to be 34.8 ± 2 and 41.3 ± 2 kJ mol⁻¹, respectively. Moreover, Ru@SBA-15 NCs also show satisfied durable stability for the hydrolytic dehydrogenation of AB and HB, respectively.