Tunable Design of Structural Colors Produced by Pseudo-1D Photonic Crystals of Graphene Oxide

Towards rapid colorimetric detection of extracellular vesicles using optofluidics-enhanced color-changing optical metasurface

Efficient transportation and delivery of analytes to the surface of optical sensors are crucial for overcoming limitations in diffusion-limited transport and analyte sensing. In this study, we propose a novel approach that combines metasurface optics with optofluidics-enabled active transport of extracellular vesicles (EVs). By leveraging this combination, we show that we can rapidly capture EVs and detect their adsorption through a color change generated by a specially designed optical metasurface that produces structural colors. Our results demonstrate that the integration of optofluidics and metasurface optics enables spectrometer-less and label-free colorimetric read-out for EV concentrations as low as 107 EVs/ml, achieved within a short incubation time of two minutes.

Liquid Crystal Materials for Biomedical Applications

Liquid crystal is a state of matter being intermediate between solid and liquid. Liquid crystal materials exhibit both orientational order and fluidity. While liquid crystals have long been highly recognized in the display industry, in recent decades, liquid crystals provide new opportunities into the cross-field of material science and biomedicine due to their biocompatibility, multifunctionality, and responsiveness. In this review, the latest achievements of liquid crystal materials applied in biomedical fields are summarized. The start is made by introducing the basic concepts of liquid crystals, and then shifting to the components of liquid crystals as well as functional materials derived therefrom. After that, the ongoing and foreseeable applications of liquid crystal materials in the biomedical field with emphasis put on several cutting-edge aspects, including drug delivery, bioimaging, tissue engineering, implantable devices, biosensing, and wearable devices are discussed. It is hoped that this review will stimulate ingenious ideas for the future generation of liquid crystal-based drug development, artificial implants, disease diagnosis, health status monitoring, and beyond.

Scalable and Sensitive Humidity-Responsive Polymer Photonic Crystal Films for Anticounterfeiting Application

In this study, we fabricate a new kind of ultrasensitive humidity-responsive photonic crystal (HPC) films based on emulsion polymerization and the open mill and bending-induced ordering technique (OM-BIOT) method, which is simple and scalable. The HPC film senses relative humidity (RH) from 9 to 98% for the polymer matrix swells up in high RH and shrinks in low RH, leading to a large reflectance shift (81 nm) and distinct color change. Based on the double-peak reflective spectra of the HPC film, we confirm the gradient swelling hypothesis and find that the thickness is another important factor for controlling the sensitivity and response rate of the HPC film. Except for static humidity, the HPC film can also respond to the dynamic humid flow of blowing and polar solvents, which broadens its application potential. This kind of HPC film shows a vivid structural color, and the humidity-responsive behavior is quick, distinct, energy-free, and reversible, having a great prospect for anticounterfeiting application.

Iridescent coating of graphene oxide on various substrates

Two-dimensional nanomaterials have been incorporated into coating layers for exceptional properties in mechanic toughness, electronics, thermology and optics. Graphene oxide (GO), however, was greatly hindered by its strong adsorption within visible wavelength and hereby the intrinsic dark color at the solid state. Herein, we found a unique aqueous mixture of GO containing sodium dodecyl sulfate and l-ascorbic acid. It enabled to produce iridescent coating layers with tunable thickness of 0.3-50 μm on both hydrophilic and hydrophobic substrates (e.g., glass, aluminum foil, polytetrafluoroethylene), through brushing, liquid-casting, dipping and writing. Their iridescence could be further tuned by incorporating MXene nanosheets. And their mechanical properties could be enhanced by certain synthetic polymers (e.g., polyvinyl alcohol and polyethylene glycol). Their sensitivity to heat, laser and water also benefited to pattern the coating layers. Furthermore, by controlling laser intensity, the domain color could be changed (e.g., green to blue). Thus, this study may pave a new pathway of producing iridescent coatings of graphene oxide in a large scale for practical applications.

Multiple Anti-Counterfeiting Composite Film Based on Cholesteric Liquid Crystal and QD Materials

A composite film with multiple anti-counterfeiting features was demonstrated by superposing quantum dots (QDs) polymer matrix (film A) and cholesteric liquid crystal film (film B) together. The first-line and second-line anti-counterfeiting characteristics were successfully implemented by employing thermochromic, angular photochromic, and circularly polarized discoloration of film B, respectively. By initiatively utilizing the different relative positions between the fluorescence emission peak (λ_em) of film A and the central selective reflection wavelength (λ_m) of film B at different temperatures, which resulted in changes in the fluorescence spectra or the different presence of latent patterns, the most important third-line anti-counterfeiting feature was successfully achieved.

Hyperchromatic structural color for perceptually enhanced sensing by the naked eye

Colorimetric sensors offer the prospect for on-demand sensing diagnostics in simple and low-cost form factors, enabling rapid spatiotemporal inspection by digital cameras or the naked eye. However, realizing strong dynamic color variations in response to small changes in sample properties has remained a considerable challenge, which is often pursued through the use of highly responsive materials under broadband illumination. In this work, we demonstrate a general colorimetric sensing technique that overcomes the performance limitations of existing chromatic and luminance-based sensing techniques. Our approach combines structural color optical filters as sensing elements alongside a multichromatic laser illuminant. We experimentally demonstrate our approach in the context of label-free biosensing and achieve ultrasensitive and perceptually enhanced chromatic color changes in response to refractive index changes and small molecule surface attachment. Using structurally enabled chromaticity variations, the human eye is able to resolve ∼0.1-nm spectral shifts with low-quality factor (e.g., Q ∼ 15) structural filters. This enables spatially resolved biosensing in large area (approximately centimeters squared) lithography-free sensing films with a naked eye limit of detection of ∼3 pg/mm², lower than industry standard sensors based on surface plasmon resonance that require spectral or angular interrogation. This work highlights the key roles played by both the choice of illuminant and design of structural color filter, and it offers a promising pathway for colorimetric devices to meet the strong demand for high-performance, rapid, and portable (or point-of-care) diagnostic sensors in applications spanning from biomedicine to environmental/structural monitoring.

Nature-Inspired Emerging Chiral Liquid Crystal Nanostructures: From Molecular Self-Assembly to DNA Mesophase and Nanocolloids

Liquid crystals (LCs) are omnipresent in living matter, whose chirality is an elegant and distinct feature in certain plant tissues, the cuticles of crabs, beetles, arthropods, and beyond. Taking inspiration from nature, researchers have recently devoted extensive efforts toward developing chiral liquid crystalline materials with self-organized nanostructures and exploring their potential applications in diverse fields ranging from dynamic photonics to energy and safety issues. In this review, an account on the state of the art of emerging chiral liquid crystalline nanostructured materials and their technological applications is provided. First, an overview on the significance of chiral liquid crystalline architectures in various living systems is given. Then, the recent significant progress in different chiral liquid crystalline systems including thermotropic LCs (cholesteric LCs, cubic blue phases, achiral bent-core LCs, etc.) and lyotropic LCs (DNA LCs, nanocellulose LCs, and graphene oxide LCs) is showcased. The review concludes with a perspective on the future scope, opportunities, and challenges in these truly advanced functional soft materials and their promising applications.

An iridescent film of porous anodic aluminum oxide with alternatingly electrodeposited Cu and SiO2 nanoparticles

The structurally colored surface of anodic aluminum oxide (AAO) is highly useful for decoration and anti-counterfeiting applications, which are of significance for both scientific and industrial communities. This study presents the first demonstration of the fabrication of an iridescent film of porous AAO on an industrial aluminum alloy substrate, with alternatingly electrodeposited Cu and SiO₂ nanoparticles (NPs). A rainbow effect was effectively obtained for the optimized sample with appropriate alternating electrodeposition times. The structure and optical properties of a series of the electrodeposited AAO-based thin film were investigated. The Cu and SiO₂ NPs were found to be uniformly deposited into the porous structure of the AAO film, and the alternating electrodeposition repeating twice led to the formation of the optimal AAO-based thin film that exhibited a rainbow effect and superior anti-corrosion performance.

Graphene Oxide as an Optical Biosensing Platform: A Progress Report

A few years ago, crucial graphene oxide (GO) features such as the carbon/oxygen ratio, number of layers, and lateral size were scarcely investigated and, thus, their impact on the overall optical biosensing performance was almost unknown. Nowadays valuable insights about these features are well documented in the literature, whereas others remain controversial. Moreover, most of the biosensing systems based on GO were amenable to operating as colloidal suspensions. Currently, the literature reports conceptually new approaches obviating the need of GO colloidal suspensions, enabling the integration of GO onto a solid phase and leading to their application in new biosensing devices. Furthermore, most GO-based biosensing devices exploit photoluminescent signals. However, further progress is also achieved in powerful label-free optical techniques exploiting GO in biosensing, particularly using optical fibers, surface plasmon resonance, and surface enhanced Raman scattering. Herein, a critical overview on these topics is offered, highlighting the key role of the physicochemical properties of GO. New challenges and opportunities in this exciting field are also highlighted.

Separation-cooperated assembly of liquid photonic crystals from polydisperse particles

Easy and cost-effective production of high-quality photonic crystals (PCs) remains challenging but attractive, not just because they are a type of gemstone but more for their scientific applications (e.g., serving as lossless waveguides, visual sensors, novel pigments and novel separation media). Herein presented is a separation-cooperated assembly (SCA) strategy able to organize cheap polydisperse particles into PCs. Its feasibility was validated through sink-induced SCA of poorly disperse (size variation up to 56%) particles into iridescent liquid PCs in 3 days or more. Strikingly, with a sharp photonic band gap down to 10 nm (ca. 1/7 of the reported 66 nm), the liquid PCs are able to cyclically recover their iridescent color in ca 20 s after agitation, and keep their structural order after dryness, making them practicable to write and paint directly. Also significant is that SCA yielded uniform particles with size variation down to 0.7%. It is thus an easy way to isolate homogeneous particles from disperse ones.

Large-Scale Noniridescent Structural Color Printing Enabled by Infiltration-Driven Nonequilibrium Colloidal Assembly

Structural colors originating from interaction of light with intricately arranged micro-/nanostructures have stimulated considerable interest because of their inherent photostability and energy efficiency. In particular, noniridescent structural color with wide viewing angle has been receiving increasing attention recently. However, no method is yet available for rapid and large-scale fabrication of full-spectrum structural color patterns with wide viewing angles. Here, infiltration-driven nonequilibrium assembly of colloidal particles on liquid-permeable and particle-excluding substrates is demonstrated to direct the particles to form amorphous colloidal arrays (ACAs) within milliseconds. The infiltration-assisted (IFAST) colloidal assembly opens new possibilities for rapid manufacture of noniridescent structural colors of ACAs and straightforward structural color mixing. Full-spectrum noniridescent structural colors are successfully produced by mixing primary structural colors of red, blue, and yellow using a commercial office inkjet printer. Rapid fabrication of large-scale structural color patterns with sophisticated color combination/layout by IFAST printing is realized. The IFAST technology is versatile for developing structural color patterns with wide viewing angles, as colloidal particles, inks, and substrates are flexibly designable for diverse applications.

Electrothermally Driven Fluorescence Switching by Liquid Crystal Elastomers Based On Dimensional Photonic Crystals

In this article, the fabrication of an active organic-inorganic one-dimensional photonic crystal structure to offer electrothermal fluorescence switching is described. The film is obtained by spin-coating of liquid crystal elastomers (LCEs) and TiO₂ nanoparticles alternatively. By utilizing the property of LCEs that can change their size and shape reversibly under external thermal stimulations, the λ_max of the photonic band gap of these films is tuned by voltage through electrothermal conversion. The shifted photonic band gap further changes the matching degree between the photonic band gap of the film and the emission spectrum of organic dye mounting on the film. With rhodamine B as an example, the enhancement factor of its fluorescence emission is controlled by varying the matching degree. Thus, the fluorescence intensity is actively switched by voltage applied on the system, in a fast, adjustable, and reversible manner. The control chain of using the electrothermal stimulus to adjust fluorescence intensity via controlling the photonic band gap is proved by a scanning electron microscope (SEM) and UV-vis reflectance. This mechanism also corresponded to the results from the finite-difference time-domain (FDTD) simulation. The comprehensive usage of photonic crystals and liquid crystal elastomers opened a new possibility for active optical devices.

Response to "Comment on 'Tunable Design of Structural Colors Produced by Pseudo-1D Photonic Crystals of Graphene Oxide' and Thin-Film Interference from Dried Graphene Oxide Film"

The structural colors produced by pseudo-1D photonic crystals of graphene oxide originate from the regularly layered structure of GO films, which have been previously reported. For the same observation regarding the tunable color reflection obtained from the dried GO films, Hong et al. suggest a different mechanism to the previously published model.

Comment on "Tunable Design of Structural Colors Produced by Pseudo-1D Photonic Crystals of Graphene Oxide" and Thin-Film Interference from Dried Graphene Oxide Film

The mechanism of the iridescent color reflection from dried thin graphene oxide (GO) film on Si wafer is clarified. Dissimilarly to the photonic crystalline reflection in aqueous GO dispersion, the color reflection in dried GO film originates from the thin film interference. The peak reflection can reach 23% by optimizing the GO thickness and the substrate.

Sub-micron silk fibroin film with high humidity sensibility through color changing

A Sub-micron silk fibroin film with high humidity sensibility through color changing is achieved by spin-coating fibroin aqueous solution, and it can be potentially applied for low-cost and fast humidity detection, as well as anti-counterfeit labels.

Biomimetic superwettable materials with structural colours

This review aims at offering a comprehension elaboration of the mechanism, recent biomimetic research and applications of biomimetic superwettable materials with structural colours. Futhermore, this review will provide significant insight into the design, fabrication and application of biomimetic superwettable materials with structural colours.

Heat Transfer Organic Materials: Robust Polymer Films with the Outstanding Thermal Conductivity Fabricated by the Photopolymerization of Uniaxially Oriented Reactive Discogens

For the development of advanced heat transfer organic materials (HTOMs) with excellent thermal conductivities, triphenylene-based reactive discogens, 2,3,6,7,10,11-hexakis(but-3-enyloxy)triphenylene (HABET) and 4,4',4″,4‴,4'''',4'''''-(triphenylene-2,3,6,7,10,11-hexaylhexakis(oxy))hexakis(butane-1-thiol) (THBT), were synthesized as discotic liquid crystal (DLC) monomers and cross-linkers, respectively. A temperature-composition phase diagram of HABET-THBT mixtures was first established based on their thermal and microscopic analyses. From the experimental results, it was realized that the thermal conductivity of DLC HTOM was strongly affected by the molecular organizations on a macroscopic length scale. Macroscopic orientation of self-assembled columns in DLC HTOMs was effectively achieved under the rotating magnetic fields and successfully stabilized by the photopolymerization. The DLC HTOM polymer-stabilized at the LC phase exhibited the remarkable thermal conductivity above 1 W/mK. When the DLC HTOM was macroscopically oriented, the thermal conductivity was estimated to be 3 W/mK along the in-plane direction of DLC molecule. The outstanding thermal conductivity of DLC HTOM should be originated not only from the high content of two-dimensional aromatic discogens but also from the macroscopically oriented and self-assembled DLC. The newly developed DLC HTOM with an outstanding thermal conductivity as well as with an excellent mechanical sustainability can be applied as directional heat dissipating materials in electronic and display devices.