Design of 3D Graphene-Oxide Spheres and Their Derived Hierarchical Porous Structures for High Performance Supercapacitors

Mechanical Exfoliation of Expanded Graphite to Graphene-Based Materials and Modification with Palladium Nanoparticles for Hydrogen Storage

Hydrogen is a promising green fuel carrier that can replace fossil fuels; however, its storage is still a challenge. Carbon-based materials with metal catalysts have recently been the focus of research for solid-state hydrogen storage due to their efficacy and low cost. Here, we report on the exfoliation of expanded graphite (EG) through high shear mixing and probe tip sonication methods to form graphene-based nanomaterial ShEG and sEG, respectively. The exfoliation processes were optimized based on electrochemical capacitance measurements. The exfoliated EG was further functionalized with palladium nanoparticles (Pd-NP) for solid-state hydrogen storage. The prepared graphene-based nanomaterials (ShEG and sEG) and the nanocomposites (Pd-ShEG and Pd-sEG) were characterized with various traditional techniques (e.g., SEM, TEM, EDX, XPS, Raman, XRD) and the advanced high-resolution pair distribution function (HRPDF) analysis. Electrochemical hydrogen uptake and release (QH) were measured, showing that the sEG decorated with Pd-NP (Pd-sEG, 31.05 mC cm-2) and ShEG with Pd-NP (Pd-ShEG, 24.54 mC cm-2) had a notable improvement over Pd-NP (9.87 mC cm-2) and the composite of Pd-EG (14.7 mC cm-2). QH showed a strong linear relationship with an effective surface area to volume ratio, indicating nanoparticle size as a determining factor for hydrogen uptake and release. This work is a promising step toward the design of the high-performance solid-state hydrogen storage devices through mechanical exfoliation of the substrate EG to control nanoparticle size and dispersion.

Understanding and Optimizing Capacitance Performance in Reduced Graphene-Oxide Based Supercapacitors

Reduced graphene-oxide (RGO)-based electrodes in supercapacitors deliver high energy/power capacities compared to typical nanoporous carbon materials. However, extensive critical analysis of literature reveals enormous discrepancies (up to 250 F g^-1 ) in the reported capacitance (variation of 100-350 F g^-1 ) of RGO materials synthesized under seemingly similar methods, inhibiting an understanding of capacitance variation. Here, the key factors that control the capacitance performance of RGO electrodes are demonstrated by analyzing and optimizing various types of commonly applied electrode fabrication methods. Beyond usual data acquisition parameters and oxidation/reduction properties of RGO, a substantial difference of more than 100% in capacitance values (with change from 190 ± 20 to 340 ± 10 F g^-1 ) is found depending on the electrode preparation method. For this demonstration, ≈40 RGO-based electrodes are fabricated from numerous distinctly different RGO materials via typically applied methods of solution (aqueous and organic) casting and compressed powders. The influence of data acquisition conditions and capacitance estimation practices are also discussed. Furthermore, by optimizing electrode processing method, a direct surface area governed capacitance relationship for RGO structures is revealed.

Tuning the electrical properties of graphene oxide through low-temperature thermal annealing

During the last fifteen years, the reduction of electrically insulating graphene oxide (GO) through the elimination of oxygen containing functional groups and the restoration of sp² conjugation yielding its conducting form, known as reduced graphene oxide (rGO), has been widely investigated as a scalable and low-cost method to produce materials featuring graphene-like characteristics. Among various protocols, thermal annealing represents an attractive green approach compatible with industrial processes. However, the high temperatures typically required to accomplish this process are energetically demanding and are incompatible with the use of plastic substrates often desired for flexible electronics applications. Here, we report a systematic study on the low-temperature annealing of GO by optimizing different annealing conditions, i.e., temperature, time, and reduction atmosphere. We show that the reduction is accompanied by structural changes of GO, which affect its electrochemical performance when used as an electrode material in supercapacitors. We demonstrate that thermally-reduced GO (TrGO) obtained under air or inert atmosphere at relatively low temperatures (<300 °C) exhibits low film resistivities (10^-2-10^-4 Ω m) combined with unaltered resistance after 2000 bending cycles when supported on plastic substrates. Moreover, it exhibits enhanced electrochemical characteristics with a specific capacitance of 208 F g^-1 and a capacitance retention of >99% after 2000 cycles. The reported strategy is an important step forward toward the development of environmentally friendly TrGO for future electrical or electrochemical applications.

Molten salt-confined pyrolysis towards carbon nanotube-backboned microporous carbon for high-energy-density and durable supercapacitor electrodes

The development of a green and scalable construction of a three-dimensional (3D) hierarchically porous carbon as an electrode material for supercapacitors is promising but challenging. Herein, a carbon nanotube-backboned microporous carbon (CNT-MPC) was prepared by molten salt-confined pyrolysis, during which the salt eutectics simultaneously acted as a high-temperature reaction solvent and reusable template. Among the CNT-MPC, the CNT backbone provided a 3D conductive framework, whereas the MPC sheath possessed integrated mesopores and micropores as an efficient ion reservoir. As a result, the as-obtained CNT-MPC exhibited a high specific capacitance of 305.6 F g^-1 at 1 A g^-1, high energy density of 20.5 W h kg^-1 and excellent cyclic stability with no capacitance losses after 50 000 cycles. The molten-salt confined pyrolysis strategy therefore provides a low-cost, environmentally-friendly and readily industrialized route to develop a hierarchically porous carbon that is highly required for high-energy-density and durable supercapacitors.

Synthesis of CoO-Decorated Graphene Hollow Nanoballs for High-Performance Flexible Supercapacitors

The formation of thin and uniform capacitive layers for fully interacting with an electrolyte in a supercapacitor is a key challenge to achieve optimal capacitance. Here, we demonstrate a binder-free and flexible supercapacitor with the electrode made of cobalt oxide nanoparticle (CoO NP)-wrapped graphene hollow nanoballs (GHBs). The growth process of Co(OH)₂ NPs, which could subsequently be thermally annealed to CoO NPs, was monitored by in situ electrochemical liquid transmission electron microscopy (TEM). In the dynamic growth of Co(OH)₂ NPs on a film of GHBs, the lateral formation of fan-shaped clusters of Co(OH)₂ NPs spread over the surface of GHBs was observed by in situ TEM. This CoO-GHBs/CC electrode exhibits high specific capacitance (2238 F g^-1 at 1 A g^-1) and good rate capability (1170 F g^-1 at 15 A g^-1). The outstanding capacitive performance and good rate capability of the CoO-GHBs/CC electrode were achieved by the synergistic combination of highly pseudocapacitive CoO and electrically conductive GHBs with large surface areas. A solid-state symmetric supercapacitor (SSC), with CoO-GHBs/CCs used for both positive and negative electrodes, exhibits high power density (6000 W kg^-1 at 8.2 Wh kg^-1), high energy density (16 Wh kg^-1 at 800 W kg^-1), cycling stability (∼100% capacitance retention after 5000 cycles), and excellent mechanical flexibility at various bending positions. Finally, a serial connection of four SSC devices can efficiently power a red light-emitting diode after being charged for 20 s, demonstrating the practical application of this CoO-GHBs/CC-based SSC device for efficient energy storage.

3D Graphene Materials: From Understanding to Design and Synthesis Control

Carbon materials, with their diverse allotropes, have played significant roles in our daily life and the development of material science. Following 0D C₆₀ and 1D carbon nanotube, 2D graphene materials, with their distinctively fascinating properties, have been receiving tremendous attention since 2004. To fulfill the efficient utilization of 2D graphene sheets in applications such as energy storage and conversion, electrochemical catalysis, and environmental remediation, 3D structures constructed by graphene sheets have been attempted over the past decade, giving birth to a new generation of graphene materials called 3D graphene materials. This review starts with the definition, classifications, brief history, and basic synthesis chemistries of 3D graphene materials. Then a critical discussion on the design considerations of 3D graphene materials for diverse applications is provided. Subsequently, after emphasizing the importance of normalized property characterization for the 3D structures, approaches for 3D graphene material synthesis from three major types of carbon sources (GO, hydrocarbons and inorganic carbon compounds) based on GO chemistry, hydrocarbon chemistry, and new alkali-metal chemistry, respectively, are comprehensively reviewed with a focus on their synthesis mechanisms, controllable aspects, and scalability. At last, current challenges and future perspectives for the development of 3D graphene materials are addressed.

High Ion Transport within a Freeze-Casted Gel Film for High-Rate Integrated Flexible Supercapacitors

Gel electrolytes are important components in flexible solid-state supercapacitors. An urgent need exists for gel electrolytes that can store abundant electrolyte ions and provide high ionic conductivity, with performance characteristics similar to the liquid electrolyte, enabling high-power capability for devices. Herein, we have reported a general and scalable strategy toward various high-performance gel electrolytes including the first freeze of chemical cross-linked poly(vinyl alcohol) followed by infusing with different electrolytes (acid, neutral, and alkaline). The engineering not only endows robust electrolyte ion retention ability and outstanding ion migration rate but also strengthens the mechanical properties for gel electrolytes. As a proof of application, we demonstrate that an all-in-one supercapacitor with a H₂SO₄ gel electrolyte can deliver excellent rate capability (58.2% retention under the 50-fold increase in current densities), high areal capacitance (644.4 mF cm^-2), and long operating lifetime (63.6% retention after 50 000 cycles), representing the best performance among the previously reported all-in-one devices. Thus, we anticipate that the method has a potential application for flexible solid-state energy storage.