Revealing the Role of Electrocatalyst Crystal Structure on Oxygen Evolution Reaction with Nickel as an Example

Spin Polarization and Phase Transformation-Aided Efficient Overall Water Splitting Using Ni50Mn18Ga25Cu7 Ferromagnetic Shape Memory Heusler Alloy

We demonstrate experimentally that the combination of half-metallic property and shape memory features of the Ni50Mn18Ga25Cu7 (NMGC) alloy can synergistically catalyze both the oxygen and hydrogen evolution reactions, leading to excellent water splitting. NMGC, a copper-doped nickel-based ferromagnetic shape memory alloy, undergoes first-order martensite to austenite phase transition with temperature variations. The martensite phase of NMGC demonstrates remarkable efficiency for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). With a large current density of 414 ± 3.8 mA/cm2 at 2.9 V, an OER overpotential of only 220 ± 1.7 mV at 20 mA/cm2, and a HER overpotential of 282 ± 2.2 mV at -10 mA/cm2, NMGC (martensite) exhibits superior electrocatalytic performance compared to the austenite phase. Additionally, under a 5000 Oe external magnetic field, NMGC (martensite) shows a significant reduction of 52 mV in OER overpotential and 6 mV for HER, highlighting the promising role of spin and phase in enhancing the water-splitting kinetics.

Crystal-Phase Engineering in Heterogeneous Catalysis

The performance of a chemical reaction is critically dependent on the electronic and/or geometric structures of a material in heterogeneous catalysis. Over the past century, the Sabatier principle has already provided a conceptual framework for optimal catalyst design by adjusting the electronic structure of the catalytic material via a change in composition. Beyond composition, it is essential to recognize that the geometric atomic structures of a catalyst, encompassing terraces, edges, steps, kinks, and corners, have a substantial impact on the activity and selectivity of a chemical reaction. Crystal-phase engineering has the capacity to bring about substantial alterations in the electronic and geometric configurations of a catalyst, enabling control over coordination numbers, morphological features, and the arrangement of surface atoms. Modulating the crystallographic phase is therefore an important strategy for improving the stability, activity, and selectivity of catalytic materials. Nonetheless, a complete understanding of how the performance depends on the crystal phase of a catalyst remains elusive, primarily due to the absence of a molecular-level view of active sites across various crystal phases. In this review, we primarily focus on assessing the dependence of catalytic performance on crystal phases to elucidate the challenges and complexities inherent in heterogeneous catalysis, ultimately aiming for improved catalyst design.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Low temperature in situ immobilization of nanoscale fcc and hcp polymorphic nickel particles in polymer-derived Si-C-O-N(H) to promote electrocatalytic water oxidation in alkaline media

We synthesized nickel (Ni) nanoparticles (NPs) in a high specific surface area (SSA) p-block element-containing inorganic compound prepared via the polymer-derived ceramics (PDC) route to dispatch the obtained nanocomposite towards oxygen evolution reaction (OER). The in situ formation of Ni NPs in an amorphous silicon carboxynitride (Si-C-O-N(H)) matrix is allowed by the reactive blending of a polysilazane, NiCl2 and DMF followed by the subsequent thermolysis of the Ni : organosilicon polymer coordination complex at a temperature as low as 500 °C in flowing argon. The final nanocomposite displays a BET SSA as high as 311 m2 g-1 while the structure of the NPs corresponds to face-centred cubic (fcc) Ni along with interstitial-atom free (IAF) hexagonal close-packed (hcp) Ni as revealed by XRD. A closer look into the compound through FEG-SEM microscopy confirms the formation of pure metallic Ni, while HR-TEM imaging reveals the occurrence of Ni particles featuring a fcc phase and surrounded by carbon layers; thus, forming core-shell structures, along with Ni NPs in an IAF hcp phase. By considering that this newly synthesized material contains only Ni without doping (e.g., Fe) with a low mass loading (0.15 mg cm-2), it shows promising OER performances with an overpotential as low as 360 mV at 10 mA cm-2 according to the high SSA matrix, the presence of the IAF hcp Ni NPs and the development of core-shell structures. Given the simplicity, the flexibility, and the low cost of the proposed synthesis approach, this work opens the doors towards a new family of very active and stable high SSA nanocomposites made by the PDC route containing well dispersed and accessible non-noble transition metals for electrocatalysis applications.

Fluorinated Materials as Positive Electrodes for Li- and Na-Ion Batteries

Fluorine is known to be a key element for various components of batteries since current electrolytes rely on Li-ion salts having fluorinated ions and electrode binders are mainly based on fluorinated polymers. Metal fluorides or mixed anion metal fluorides (mainly oxyfluorides) have also gained a substantial interest as active materials for the electrode redox reactions. In this review, metal fluorides for cathodes are considered; they are listed according to the dimensionality of the metal fluoride subnetwork. The synthesis conditions and the crystal structures are described; the electrochemical properties are briefly indicated, and the nature of the electron transport agent is noted. We stress the crucial importance of the elaboration processes to induce the presence of cation disorders, of anion substitutions (mainly F-/O2- or F-/OH-) or vacancies. Finally, we show that an accurate structural characterization is a key step to enable enhanced material performances to overcome several lasting roadblocks, namely the large irreversible capacity and poor energy efficiency that are frequently encountered.

Methane plasma-mediated phase engineering of Ni nanosheets for alkaline hydrogen evolution

Engineering of the crystal structures of metallic nanomaterials is an alternative avenue to control the size and shape of nanocatalysts. However, the phase-controlled synthesis of Ni nanocatalysts is challenging because of its low reduction potential under mild conditions. We developed a room-temperature CH₄ plasma conversion of Ni(OH)₂ nanosheets to hexagonal close packed (hcp) Ni while maintaining a pristine shape. Increasing the temperature resulted in the formation of face-centered cubic (fcc) Ni. The hcp Ni nanosheets exhibited an overpotential of 85 mV at 10 mA cm^-2 for an electrocatalytic hydrogen evolution reaction (HER) in alkaline solution, which was superior to that of the fcc (122 mV) counterpart. Density-functional-theory calculations demonstrated that during the HER, the d-band center of hcp Ni was closer to the Fermi level, which aided the formation of H₂ molecules. This work could facilitate the synthesis of other metastable metals and metallic alloys with high efficiency for various applications.

Advanced Transition Metal-Based OER Electrocatalysts: Current Status, Opportunities, and Challenges

Oxygen evolution reaction (OER) is an important half-reaction involved in many electrochemical applications, such as water splitting and rechargeable metal-air batteries. However, the sluggish kinetics of its four-electron transfer process becomes a bottleneck to the performance enhancement. Thus, rational design of electrocatalysts for OER based on thorough understanding of mechanisms and structure-activity relationship is of vital significance. This review begins with the introduction of OER mechanisms which include conventional adsorbate evolution mechanism and lattice-oxygen-mediated mechanism. The reaction pathways and related intermediates are discussed in detail, and several descriptors which greatly assist in catalyst screen and optimization are summarized. Some important parameters suggested as measurement criteria for OER are also mentioned and discussed. Then, recent developments and breakthroughs in experimental achievements on transition metal-based OER electrocatalysts are reviewed to reveal the novel design principles. Finally, some perspectives and future directions are proposed for further catalytic performance enhancement and deeper understanding of catalyst design. It is believed that iterative improvements based on the understanding of mechanisms and fundamental design principles are essential to realize the applications of efficient transition metal-based OER electrocatalysts for electrochemical energy storage and conversion technologies.

Nickel nanoparticles supported on a covalent triazine framework as electrocatalyst for oxygen evolution reaction and oxygen reduction reactions

Covalent triazine frameworks (CTFs) are little investigated, albeit they are promising candidates for electrocatalysis, especially for the oxygen evolution reaction (OER). In this work, nickel nanoparticles (from Ni(COD)2) were supported on CTF-1 materials, which were synthesized from 1,4-dicyanobenzene at 400 °C and 600 °C by the ionothermal method. CTF-1-600 and Ni/CTF-1-600 show high catalytic activity towards OER and a clear activity for the electrochemical oxygen reduction reaction (ORR). Ni/CTF-1-600 requires 374 mV overpotential in OER to reach 10 mA/cm2, which outperforms the benchmark RuO2 catalyst, which requires 403 mV under the same conditions. Ni/CTF-1-600 displays an OER catalytic activity comparable with many nickel-based electrocatalysts and is a potential candidate for OER. The same Ni/CTF-1-600 material shows a half-wave potential of 0.775 V for ORR, which is slightly lower than that of commercial Pt/C (0.890 V). Additionally, after accelerated durability tests of 2000 cycles, the material showed only a slight decrease in activity towards both OER and ORR, demonstrating its superior stability.

Ni2P/C nanosheets derived from oriented growth Ni-MOF on nickel foam for enhanced electrocatalytic hydrogen evolution

Tuning the structural features that furnish electrochemically active sites with improved kinetic diffusion can provide an alternative way to achieve high performance of electrocatalysis. Here, we report a nano-structure of Ni₂P/C(NPC) nano-sheets supported on nickel foam (NF) that is prepared by sequenced nitrogen pyrolysis and gas phosphatization of Ni-MOF nanosheets. Initially, the passivated surface of nickel foam facilitates the oriented growth of Ni-MOF nanosheets, which is crucial for the maintenance of structure stability during the subsequent pyrolysis and phosphatization treatment. As a result, more catalytic active sites are exposed than the non-oriented NPC catalysts and diffusion kinetics is favorable. Consequently, the obtained composite can exhibit excellent hydrogen evolution catalytic activity in an alkaline electrolyte. For hydrogen evolution reaction, a current density of 10 mA cm^-2 is provided at an overpotential of 97 mV and its onset overpotential is only 29 mV. Meanwhile, good morphology and catalytic activity can be maintained after 12 h of stability testing. This excellent performance is believed to be the result of NPC nanosheet structure on NF derived from the facet-oriented control of pristine Ni-MOF, enabling excellent reaction kinetics.

Nitrogen-Doped Carbon-Encased Bimetallic Selenide for High-Performance Water Electrolysis

Demand of highly efficient earth-abundant transition metal-based electrocatalysts to replace noble metal materials for boosting oxygen evolution reaction (OER) is rapidly growing. Herein, an electrochemically exfoliated graphite (EG) foil supported bimetallic selenide encased in N-doped carbon (EG/(Co, Ni)Se₂-NC) hybrid is developed and synthesized by a vapor-phase hydrothermal strategy and subsequent selenization process. The as-prepared EG/(Co, Ni)Se₂-NC hybrid exhibits a core-shell structure where the particle diameter of (Co, Ni)Se₂ core is about 70 nm and the thickness of N-doped carbon shell is approximately 5 nm. Benefitting from the synergistic effects between the combination of highly active Co species and improved electron transfer from Ni species, and N-doped carbon, the EG/(Co, Ni)Se₂-NC hybrid shows remarkable electrocatalytic activity toward OER with a comparatively low overpotential of 258 mV at an current density of 10 mA cm^-2 and a small Tafel slope of 73.3 mV dec^-1. The excellent OER catalysis performance of EG/(Co, Ni)Se₂-NC hybrid is much better than that of commercial Ir/C (343 mV at 10 mA cm^-2 and 98.1 mV dec^-1), and even almost the best among all previously reported binary CoNi selenide-based OER electrocatalysts. Furthermore, in situ electrochemical Raman spectroscopy combined with ex situ X-ray photoelectron spectroscopy analysis indicates that the superb OER catalysis activity can be attributed to the highly active Co-OOH species and modified electron transfer process from Ni element.