Well-Defined Cu2 O/Cu3 (BTC)2 Sponge Architecture as Efficient Phenolics Scavenger: Synchronous Etching and Reduction of MOFs in confined-pH NH3 ⋅H2 O

Contribution of 1O2 in the efficient degradation of organic pollutants with Cu0/Cu2O/CuO@N-C activated peroxymonosulfate: A Case study with tetracycline

Peroxymonosulfate-mediated advanced oxidation processes (PMS-AOPs) degrading organic pollutants (Tetracycline (TC) as an example) in water with singlet oxygen (1O2) as the main reactive oxygen has received more and more attention. However, the generation mechanism of 1O2 is still unclear. Consequently, this study investigates the 1O2 formation mechanism during the activated PMS process using a nitrogen-copper-loaded carbon-based material (Cu0/Cu2O/CuO@N-C), synthesized by thermally decomposing organobase-modified HKUST-1 via a one-pot method. It was discovered that incorporating an organobase (Benzylamine) into the metal organic framework (MOF) precursor directs the MOF's self-assembly process and supplements its nitrogen content. This modification modulates the Nx-Cu-Oy active site formation in the material, selectively producing 1O2. Additionally, 1O2 was identified as the dominant reactive oxygen species in the Cu0/Cu2O/CuO@N-C-PMS system, contributing to TC degradation with a rate of 70.82%. The TC degradation efficiency remained high in the pH range of 3-11 and sustained its efficacy after five consecutive uses. Finally, based on the intermediates of TC degradation, three possible degradation pathways were postulated, and a reduction in the ecotoxicity of the degradation products was predicted. This work presents a novel and general strategy for constructing nitrogen-copper-loaded carbon-based materials for use in PMS-AOPs.

Template-Free Synthesis and Multifunctional Application of Foam HKUST-1

Hierarchically porous metal-organic frameworks (HP-MOFs) have attracted a lot of attention in recent years because their hierarchical pores have critical importance in strengthening their performance, including guest diffusion kinetics, catalytic activity, and selectivity, especially with reference to large molecules. However, the preparation method for simple, controllable, and stable HP-MOFs at a micro-/meso-/macroscopic scale is still lacking. Herein, we showed several forms of HKUST-1 (HKUST = Hong Kong University of Science and Technology) by simply changing the copper source and solvent type, including original micron HKUST-1 (O-HKUST-1), half-foam HKUST-1 (HF-HKUST-1), and fully foam HKUST-1 (F-HKUST-1). Compared to O-HKUST-1, HF-HKUST-1 and F-HKUST-1 possessed an apparent hierarchically porous structure due to the high fusion of HKUST-1 nanocrystals. Especially in F-HKUST-1, all of the HKUST-1 nanocrystals were tightly integrated into each other, which formed a holistic hollow foam structure. Hence, F-HKUST-1 exhibited the highest adsorption capacity toward large molecules, including proteases, phosphotungstic acid, and organic dyes. Meanwhile, F-HKUST-1 presented the highest photocatalytic degradation capability for rhodamine B. Furthermore, F-HKUST-1, loaded with phosphotungstic acid (F-HKUST-1@PTA), which was used as a catalyst, indicated a catalytic capacity comparable to that of a homogeneous catalyst (pure phosphotungstic acid).

Post-Synthetic Surface Modification of Metal-Organic Frameworks and Their Potential Applications

Metal-organic frameworks (MOFs) are porous hybrid materials with countless potential applications. Most of these rely on their porous structure, tunable composition, and the possibility of incorporating and expanding their functions. Although functionalization of the inner surface of MOF crystals has received considerable attention in recent years, methods to functionalize selectively the outer crystal surface of MOFs are developed to a lesser extent, despite their importance. This article summarizes different types of post-synthetic modifications and possible applications of modified materials such as: catalysis, adsorption, drug delivery, mixed matrix membranes, and stabilization of porous liquids.

Modulating crystal and electronic structure of NiFe-MOFs by inorganic acid for highly efficient electrochemical water oxidation

Seeking new methods to modulate the structure of metal-organic frameworks (MOFs) for diverse applications, particularly for water splitting, is intensively urgent but challenging. Herein, a simple hydrothermal method employing HCl as the modulator is developed to synthesize a series of NiFe-MOF-n/NF. The amount of HCl modulator not only changes the elemental composition and crystal structure but also modulates the electronic structure of NiFe-MOF-n/NF, thus improving intrinsic activity. Owing to the synergetic interactions between Ni and Fe atoms, free-standing feature, the optimized NiFe-MOF-2/NF yields excellent OER activity with overpotentials of 209 and 260 mV at 10 and 100 mA cm^-2, respectively, a small Tafel slope of 36.4 mV dec^-1 and excellent OER stability for 24 h at 100 mA cm^-2 in 1 M KOH. This demonstrates that NiFe-MOF-2/NF are in situ converted into metal oxide/oxyhydroxide after OER, thereby serving as the real active sites. This study offers a feasible way to fabricate low-cost, efficient MOF-based electrocatalysts.

Preparation of Hierarchically Porous Metal-Organic Frameworks via Slow Chemical Vapor Etching for CO2 Cycloaddition

Hierarchically porous metal-organic frameworks (HP-MOFs) are a class of promising functional material with micropores, mesopores, and/or macropores, which can address the issue of slow mass transfer and less exposed active sites for primitive microporous MOFs. Despite many attempts that have been achieved through a variety of techniques to date, there is still a myriad of spaces that urgently need to be exploited. In this work, we report the novel synthesis of HP-MOFs via slow chemical steam etching. The preparation process can be subtly achieved using water vapor as an etchant; meanwhile, the addition of ethanol into the vapor atmosphere is carried out because it can stabilize the MOF framework well with its hydrophobic alkane tails, thereby slowing the etching rate toward MOFs, successfully realizing the controllable etching manner of MOF components. Furthermore, the joint influence of the water content and etching temperature on the MOF backbone structure etched has thus been investigated in detail. Impressively, we can harvest desired HP-MOFs with the retained crystalline structure at a water content of 50% and an etching temperature of 120 °C. The resulting HK-120/50 product etched exhibits excellent catalytic activity and stability in [2 + 3] cycloaddition of CO₂ than pristine MOF, which can be attributed to the more exposure of active sites and the acceleration of mass transportation across the entire MOF skeleton. Noteworthy, the strategy proposed in this study may be extended to other HP-MOF construction systems due to the lability of most MOFs toward the chemical water vapor.

Branched In2O3 Mesocrystal of Ordered Architecture Derived from the Oriented Alignment of a Metal-Organic Framework for Accelerated Hydrogen Evolution over In2O3-ZnIn2S4

It is fascinating yet challenging to assemble anisotropic nanowires into ordered architectures of high complexity and intriguing functions. We exploited a facile strategy involving oriented etching of a metal-organic fragment (MOF) to advance the rational design of highly ordered nanostructures. As a proof of concept, a microscale MIL-68(In) single crystal was etched with a K₃[Co(CN)₆] solution to give a microtube composed of aligned MIL-68(In) nanorods. Annealing such a MIL-68(In) microtube readily created an unprecedented branched In₂O₃ mesocrystal by assembly of In₂O₃ nanorods aligned in order. The derived ordered-In₂O₃-ZnIn₂S₄ is more efficient in catalyzing visible-light-driven H₂ evolution (8753 μmol h^-1 g^-1) outperforming the disordered-In₂O₃-ZnIn₂S₄ counterpart (2700 μmol h^-1 g^-1) as well as many other state-of-the-art ZnIn₂S₄-based photocatalysts. The ordered architecture significantly boosts the short-range electron transfer in an In₂O₃-ZnIn₂S₄ heterojunction but has a negligible impact on the long-range electron transfer among In₂O₃ mesocrystals. The density functional theory (DFT) calculation reveals that the oriented etching is achieved by the selective binding of the [Co(CN)₆]^3- etchant on the (110) plane of MIL-68(In), which can drag the In atoms out of the framework in order. Our findings could broaden the technical sense toward advanced photocatalyst design and impose scientific impacts on unveiling how ordered photosystems operate.

Etching and polymerization reactions of alkoxythiophenes in HKUST-1: choosing between filled and core–shell MOF/polymer composite structures

Neat alkoxythiophenes react with MOF HKUST-1 to form a core–shell composite where the HKUST-1 surface is coated with conjugated polymer, while hexane solutions of thiophenes form a filled composite with polythiophene inside MOF pores.