2D Intrinsic Ferromagnetic MnP Single Crystals

Synergistic electrochemical catalysis by high-entropy metal phosphide in lithium-sulfur batteries

The shuttle effect and sluggish redox kinetics of polysulfides have hindered the development of lithium-sulfur batteries (LSBs) as premier energy storage devices. To address these issues, a high-entropy metal phosphide (NiCoMnFeCrP) was synthesized using the sol-gel method. NiCoMnFeCrP, with its rich metal species, exhibits strong synergistic effects and provides numerous catalytic active sites for the conversion of polysulfides. These active sites, possessing significant polarity, can bond with polysulfides. In situ ultraviolet-visible were conducted to monitor the dynamic changes in species and concentrations of polysulfides, validating the ability of NiCoMnFeCrP to facilitate the conversion of polysulfides. The batteries with the NiCoMnFeCrP catalyst as functional separators exhibited minimal capacity decay rates of 0.04 % and 0.23 % after 100 cycles at 0 °C and 60 °C, respectively. This indicates that the NiCoMnFeCrP catalyst possesses good thermal stability. Meanwhile, its area capacity can reach 4.78 mAh cm-2 at a high sulfur load of 4.54 mg cm-2. In conclusion, NiCoMnFeCrP achieves the objective of mitigating the shuttle effect and accelerating the kinetics of the redox reaction, thereby facilitating the commercialization of LSBs.

Atomic Diffusion Rate Dominated Fabrication of High Entropy Phosphide with Heterogeneous Aggregation for Oxygen Evolution Reaction

The synthesis of high-entropy phosphide (HEP) remains a great challenge owing to the different migration rates of different metallic atoms. Herein, a new metal organic gel (MOG) precursor strategy is proposed for HEP synthesis by controlling the migration rate of different atoms in an organic gel. The MOG precursor with five kinds of metal and phosphor species homogeneously dispersing is formed through a facile solvothermal method, which is calcined at 900 °C to obtain carbon-supported HEP FeCoNiMnCdP (MPC-5). The difference in the atom radius and the influence of MOG on the migration rate result in heterogeneous aggregation of different atoms in the product, which increases the defects in the product to a certain extent. In addition, the presence of carbon and nitrogen in the gel simultaneously realizes carbon coating and nitrogen doping. Combining the above advantages, the MPC-5 shows excellent oxygen evolution reaction (OER) catalytic performance with an overpotential of 250 mV at 10 mA·cm-2, superior to many recently reported OER electrocatalysts. This work provides a new strategy to solve the differences in the migration rates of different metals to obtain pure phase high-entropy phosphides, which is conducive to the further development of high-entropy materials and their applications in the energy and catalysis fields.

Intergranular Spin Dependent Tunneling Dominated Magnetoresistance in Helimagnetic Manganese Phosphide Thin Films

Helical magnets are emerging as a novel class of materials for spintronics and sensor applications; however, research on their charge- and spin-transport properties in a thin film form is less explored. Herein, we report the temperature and magnetic field-dependent charge transport properties of a highly crystalline MnP nanorod thin film over a wide temperature range (2 K < T < 350 K). The MnP nanorod films of ~100 nm thickness were grown on Si substrates at 500 °C using molecular beam epitaxy. The temperature-dependent resistivity ρ(T) data exhibit a metallic behavior (dρ/dT > 0) over the entire measured temperature range. However, large negative magnetoresistance (Δρ/ρ) of up to 12% is observed below ~50 K at which the system enters a stable helical (screw) magnetic state. In this temperature regime, the Δρ(H)/ρ(0) dependence also shows a magnetic field-manipulated CONE + FAN phase coexistence. The observed magnetoresistance is dominantly governed by the intergranular spin dependent tunneling mechanism. These findings pinpoint a correlation between the transport and magnetism in this helimagnetic system.

Li-S Chemistry of Manganese Phosphides Nanoparticles With Optimized Phase

The targeted synthesis of manganese phosphides with target phase remains a huge challenge because of their various stoichiometries and phase-dependent physicochemical properties. In this study, phosphorus-rich MnP, manganese-rich Mn₂ P, and their heterostructure MnP-Mn₂ P nanoparticles evenly dispersed on porous carbon are accurately synthesized by a convenient one-pot heat treatment of phosphate resin combined with Mn²⁺ . Moreover, their electrochemical properties are systematically investigated as sulfur hosts in lithium-sulfur batteries. Density functional theory calculations demonstrate the superior adsorption, catalysis capabilities, and electrical conductivity of MnP-Mn₂ P/C, compared with MnP/C and Mn₂ P/C. The MnP-Mn₂ P/C@S exhibits an excellent capacity of 763.3 mAh g^-1 at 5 C with a capacity decay rate of only 0.013% after 2000 cycles. A phase evolution product (MnS) of MnP-Mn₂ P/C@S is detected during the catalysis of MnP-Mn₂ P/C with polysulfides redox through in situ X-ray diffraction and Raman spectroscopy. At a sulfur loading of up to 8 mg cm^-2 , the MnP-Mn₂ P/C@S achieves an area capacity of 6.4 mAh cm^-2 at 0.2 C. A pouch cell with the MnP-Mn₂ P/C@S cathode exhibits an initial energy density of 360 Wh kg^-1 .

A general thermodynamics-triggered competitive growth model to guide the synthesis of two-dimensional nonlayered materials

Two-dimensional (2D) nonlayered materials have recently provoked a surge of interest due to their abundant species and attractive properties with promising applications in catalysis, nanoelectronics, and spintronics. However, their 2D anisotropic growth still faces considerable challenges and lacks systematic theoretical guidance. Here, we propose a general thermodynamics-triggered competitive growth (TTCG) model providing a multivariate quantitative criterion to predict and guide 2D nonlayered materials growth. Based on this model, we design a universal hydrate-assisted chemical vapor deposition strategy for the controllable synthesis of various 2D nonlayered transition metal oxides. Four unique phases of iron oxides with distinct topological structures have also been selectively grown. More importantly, ultra-thin oxides display high-temperature magnetic ordering and large coercivity. Mn_xFe_yCo_3-x-yO₄ alloy is also demonstrated to be a promising room-temperature magnetic semiconductor. Our work sheds light on the synthesis of 2D nonlayered materials and promotes their application for room-temperature spintronic devices.

Facet engineering of ultrathin two-dimensional materials

Ultrathin two-dimensional (2D) materials exhibit broad application prospects in many fields due to the enhanced specific surface area to volume ratio and quantum confinement effect. Because of the atomic thickness and various orientations, ultrathin 2D materials exposing specific facets have drawn great attention for various applications in catalysis, batteries, optoelectronics, magnetism, epitaxial template for material growth, etc. Though maintaining the atomic thickness of 2D materials while controlling crystal facets is an enormous challenge, breakthroughs are being made. This review provides a comprehensive overview of the recent advances in the facet engineering of 2D materials, ranging from a basic understanding of facets and the corresponding approaches and the significance of facet engineering. We also propose current challenges and forecast future development directions including the establishment of a facet database, the fabrication of new 2D materials, the design of specific substrates, and the introduction of theoretical calculations and in situ characterization techniques. This review can guide researchers to design ultrathin 2D materials with unique and distinct facets and provide an insight into the applications of energy, magnetism, optics, biomedicine, and other fields.

Growth, Raman Scattering Investigation and Photodetector Properties of 2D SnP

As an important metal phosphides material, 2D tin phosphides (SnP_x 0 <  x ≤ 3) have been theoretically predicted to have intriguing physicochemical properties and potential applications in electronics, optoelectronics, and energy fields. However, the synthesis of high-quality 2D SnP single crystal has not been reported due to the lack of efficiency and reliable growth method. Here, a facile atmospheric pressure chemical vapor deposition (APCVD) method is developed to realize the growth of high-quality 2D SnP nanosheets, by employing tin (Sn) foil as both liquid metal substrates and reaction precursor. Temperature-dependent and angle-resolved polarization Raman spectra observed Raman peaks located at 142.6, 303.3, and 444.2 cm^-1 are concluded to belong to A_1g mode, which are consistent with the theoretical calculation results. Moreover, the field-effect transistor (FET) devices based on SnP nanosheets show a typical n-type characteristic with an on/off ratio of 10³ at 200 K. SnP nanosheets also demonstrate excellent photoresponse performance under the illumination of 473, 532, and 639 nm lasers, which can be tuned by V_gs , V_ds , and light power density. It is believed that these findings can provide the first-hand experimental information for the future study of 2D SnP nanosheets.

Generation of 2D nonlayered ferromagnetic VO2(M) nanosheets induced by strain engineering of CO2

Two-dimensional (2D) nonlayered ferromagnets displaying high Curie temperatures, sizable magnetic anisotropy levels, and large spin polarizations are emerging as promising 2D ferromagnetics. However, the difficulties in synthesizing 2D nonlayered intrinsic ferromagnets have largely limited their development. Herein, defect-rich 2D nonlayered VO₂(M) nanosheets have been fabricated by deploying straining engineering of CO₂ on the metal-insulator transition (MIT) of VO₂. Above T_MIT, the strong strain engineering of CO₂ in the R phase of VO₂ generated a very large number of atomic defects in its 3D crystal structure, and as a result facilitated conversion of the defective 3D network to 2D nanosheets along the c-axis. The as-prepared 2D defective VO₂(M) nanosheets displayed unique room-temperature ferromagnetism, attributed to the symmetry breaking triggered by the disordered atomic structure combined with the 3D-to-2D transformation.

Emerging Topochemical Strategies for Designing Two-Dimensional Energy Materials

The unique properties of two-dimensional (2D) materials make them increasingly attractive in various fields, especially for energy harvesting, conversion, or storage. Simultaneously, numerous synthetic methods have been rapidly developed. Recently, topochemical strategies were demonstrated, and they show tremendous promising potential for synthesizing 2D materials due to their simplicity, scalability, and high efficiency. Considering the suitability of material structures and their synthesis methods, as well as the relationship between material properties and applications, it is necessary for researchers to comprehensively review and determine the prospects of 2D materials based on topological chemical synthesis methods and their related applications. Therefore, in this review, we systematically summarize and analyze the representative topochemical strategies for synthesizing 2D materials, including salt-templating methods for non-layered 2D materials, molten Lewis acid etching strategy for novel MXenes, and the chalcogen vapors etching and substituting strategy for phase-controlled 2D materials and so on, with the application of these 2D materials in energy-related fields including batteries, supercapacitors, and electrocatalysis. At the end of the paper, the corresponding perspective was also illustrated, and we expect that this could provide a reference for the future research in the field.

Electronic Modulation of Non-van der Waals 2D Electrocatalysts for Efficient Energy Conversion

The exploration of efficient electrocatalysts for energy conversion is important for green energy development. Owing to their high surface areas and unusual electronic structure, 2D electrocatalysts have attracted increasing interest. Among them, non-van der Waals (non-vdW) 2D materials with numerous chemical bonds in all three dimensions and novel chemical and electronic properties beyond those of vdW 2D materials have been studied increasingly over the past decades. Herein, the progress of non-vdW 2D electrocatalysts is critically reviewed, with a special emphasis on electronic structure modulation. Strategies for heteroatom doping, vacancy engineering, pore creation, alloying, and heterostructure engineering are analyzed for tuning electronic structures and achieving intrinsically enhanced electrocatalytic performances. Lastly, a roadmap for the future development of non-vdW 2D electrocatalysts is provided from material, mechanism, and performance viewpoints.