UV Photochromism in Transition Metal Oxides and Hybrid Materials

Photoswitching the fluorescence of nanoparticles for advanced optical applications

The dynamic optical response properties and the distinct features of nanomaterials make photoswitchable fluorescent nanoparticles (PF NPs) attractive candidates for advanced optical applications. Over the past few decades, the design of PF NPs by coupling photochromic and fluorescent motifs at the nanoscale has been actively pursued, and substantial efforts have been made to exploit their potential applications. In this perspective, we critically summarize various design principles for fabricating these PF NPs. Then, we discuss their distinct optical properties from different aspects by highlighting the capability of NPs in fabricating new, robust photoswitch systems. Afterwards, we introduce the pivotal role of PF NPs in advanced optical applications, including sensing, anti-counterfeiting and imaging. Finally, current challenges and future development of PF NPs are briefly discussed.

Cyclodextrin-Assisted Surface-Enhanced Photochromic Phenomena of Tungsten(VI) Oxide Nanoparticles for Label-Free Colorimetric Detection of Phenylalanine

Herein are presented the results of experiments designed to evaluate the effectiveness of host-guest interactions in improving the sensitivity of colorimetric detection based on surface-enhanced photochromic phenomena of tungsten(VI) oxide (WO3) nanocolloid particles. The UV-induced photochromic coloration of WO3 nanocolloid particles in the presence of aromatic α-amino acid (AA), l-phenylalanine (Phe) or l-2-phenylglycine (Phg), and heptakis(2,3,6-tri-O-methyl)-β-cyclodextrin (TMβCDx) in an aqueous system was investigated using UV-vis absorption spectrometry. The characteristics of the adsorption modes and configurations of AAs on the WO3 surface have also been identified by using a combination of adsorption isotherm analysis and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). A distinct linear relationship was observed between the concentration of AAs adsorbed on the WO3 nanocolloid particles and the initial photochromic coloration rate in the corresponding UV-irradiated colloidal WO3 in aqueous media, indicating that a simple and sensitive quantification of AAs can be achieved from UV-induced WO3 photochromic coloration without any complicated preprocessing. The proposed colorimetric assay in the Phe/TMβCDx/WO3 ternary aqueous system had a linear range of 1 × 10-8 to 1 × 10-4 mol dm-3 for Phe detection, with a limit of detection of 8.3 × 10-9 mol dm-3. The combined results from UV-vis absorption, ATR-FTIR, and adsorption isotherm experiments conclusively indicated that the TMβCDx-complexed Phe molecules in the Phe/TMβCDx/WO3 ternary aqueous system are preferentially and strongly inner-sphere adsorbed on the WO3 surface, resulting in a more significant surface-enhanced photochromic phenomenon. The findings in this study provided intriguing insights into the design and development of the "label-free" colorimetric assay system based on the surface-enhanced photochromic phenomenon of the WO3 nanocolloid probe.

Friction Reduction Achieved by Ultraviolet Illumination on TiO2 Surface

Controlling friction by light field is a low-cost, low-energy, non-polluting method. By applying ultraviolet light on the surface of photosensitive materials, the properties of the friction pairs or lubricant can be influenced, thus achieving the purpose of reducing friction. In this study, TiO2, an inorganic photosensitive material, was selected to investigate the modulating effect of light fields on friction lubrication when using polyalphaolefin (PAO) base oil as a lubricant, and the modulation law of light fields on the friction lubrication behavior was investigated under different loads (1-8 N), different speeds (20-380 mm/s), and different viscosities (10.1-108.6 mPa·s) of PAO base oil. The experimental results showed that light treatment could reduce the friction coefficient of PAO4 base oil lubrication from 0.034 to 0.016, with a reduction of 52.9% under conditions of 3 N-load and 56.5 mm/s-speed, and the best regulation effect could be achieved under the mixed lubrication condition. After TiO2 was treated with ultraviolet light, due to its photocatalytic property, PAO molecules were oxidized and adsorbed on the TiO2 surface to form an adsorption layer, which avoided the direct contact of rough peaks and thus reduced the friction coefficient. This study combines photosensitivity, photocatalysis, and friction, presenting a method to reduce the friction coefficient by applying a light field without changing the friction pairs or lubricants, which provides a new direction for friction modulation and gives new ideas for practical applications.

Chelating Coordination Regulated Photochromic Electrospun Nanofibers for Waterproof and Long-Color-Retention Rewritable Wearables

Photochromic materials with rapid color-switching, long color retention times, and rewritability are crucial for meeting the requirements of future rewritable ink-free media. However, these requirements are challenging to satisfy simultaneously due to the inherent constraints among these features. Herein, a novel photochromic nanofiber nonwoven fabric was designed and constructed based on a conjugated organic-inorganic hybrid structure through electrospinning and hot-pressing techniques. The as-prepared fabric can change color in merely 5 s under UV irradiation and can reach saturation within 2 min. In addition, upon the introduction of a potent metal chelator, its color retention time exceeds 14 days under ambient conditions, significantly longer than that of most rewritable materials recently reported (several hours to 5 days). Moreover, the fabric exhibits high writing resolution and can be photoprinted and heat-erased for over 100 cycles while still retaining 96% of its initial reflectivity. Hydrophobic thermoplastic polyurethane provides the fabric with excellent waterproof and antifouling properties, thus preventing the composite from swelling or collecting graffiti due to moisture or dust. This work exploits a competitive approach for designing flexible, rewritable, and superior functional wearables with practical applications.

Scalable, Green, Flexible Photochromic Bacterial Cellulose for Multicolor Switching, Photo-patterning, and Daily Sunlight UV Monitoring

Sustainable, durable, and diverse photochromic smart textiles based on bacterial cellulose (BC) have emerged as attractive candidates in UV-sensing applications due to the green and easy functionalization of BC. However, existing BC-based photochromic textiles lack photochromic efficiency and combining fastness. In this study, a green strategy for in situ fermentation is developed to achieve the directional distribution of functional particles and remarkable photochromism in photochromic bacterial cellulose (PBC). The unique functional design obtained by regulating the photochromic dye distribution in 3D nanonetworks of PBCs during in situ growth affords a more uniform distribution and high fastness. Benefiting from the uniform distribution of photochromic dyes and adequate utilization of the 3D network structure, more surface area is provided to receive and utilize the photon energy from the UV rays, making the photochromic process more effective. The as-prepared PBCs exhibited rapid (within 1 min) and stable (30 cycles) discoloration and multicolor selectivity. Their simple preparation process and exceptional wearability, e.g., their flexibility, lightweight, and air permeability, make them suitable for various applications, including tunable color switching systems, photopatterning, and daily sunlight UV monitoring. This study provides empirical value for the biofabrication of photochromic textiles and wearable flexible UV sensors.

A laser-induced zinc oxide/graphene photoelectrode for a photocurrent-polarity-switching photoelectrochemical biosensor with bipedal DNA walker amplification

A photocurrent-polarity-switching photoelectrochemical (PEC) biosensor was developed for the ultrasensitive detection of tobramycin (TOB) through bipedal DNA walker amplification with hemin-induced photocurrent-polarity-switching using a laser-induced zinc oxide/graphene (ZnO/LIG) photoelectrode. Specifically, the ZnO/LIG photoelectrode was synthesized in situ by a laser direct writing (LDW) technique. In the presence of TOB, it reacted with HP1 and HP2 and the DNA walker response was activated to form a stable hemin/G-quadruplex. Furthermore, hemin induced a polarity shift in the photocurrent signal. The developed analytical platform exhibited excellent photoelectron transport performance of ZnO/LIG, the signal amplification effect of the DNA walker strategy, and the photocurrent-polarity-switching ability of hemin. Therefore, it demonstrated satisfying photocurrent responses to the target TOB within the working range of 20 nM-1.0 μM at a low detection limit of 5.43 nM. The PEC platform exhibited good stability, reproducibility, sufficient sensitivity and high selectivity for complex experimental samples. Moreover, the photocurrent-polarity-switching PEC biosensor improved the anti-interference ability and avoided false positives or negatives.

Preparation, Characterization, Photochromic Properties, and Mechanism of PMoA/ZnO/PVP Composite Film

A novel photochromic heteropolyacid-based composite film consisting of phosphomolybdic acid (PMoA), ZnO, and polyvinylpyrrolidone (PVP) was fabricated by a sol-gel process. The microstructure and photochromic properties of the PMoA/ZnO/PVP were characterized via Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and ultraviolet-visible spectroscopy (UV-Vis). The FTIR spectra showed that the basic structures of ZnO and PVP, and the Keggin structure of PMoA in the PMoA/ZnO/PVP composite film, had not been destroyed during the preparation. The TEM images demonstrated that ZnO presented a rod-like structure, while PMoA was spherical, and many PMoA balls adhered to the surface of the ZnO rods. The XPS spectra of Mo 3d indicated that the valency of Mo atoms in the PMoA/ZnO/PVP was changed by visible light exposure. After visible light irradiation, the PMoA/ZnO/PVP varied from slight yellow to blue, while undergoing an opposite color change upon heating. The discoloration mechanism of the PMoA/ZnO/PVP was consistent with the photoelectron transfer mechanism.

Photochromic Tungsten Oxide Quantum Dots-based Fluorescent Photoswitches towards Dual-mode Anti-counterfeiting Application

Development of new anti-counterfeiting technology to increase the difficulty of imitation and decoding is becoming increasingly important, but still remains challenging yet. In this work, we report the design of new fluorescence photoswitches based on photochromic tungsten oxide quantum dots (WO₃ QDs) for dual-mode anti-counterfeiting applications. Complexing photochromic WO₃ QDs with fluorescent gold nanoclusters (AuNCs) enables the construction of a photoswitchable fluorescence system (WO₃-AuNCs) based on fluorescence resonance energy transfer. Detailed spectral and photophysical characterization showed that WO₃ QDs well-retain the photochromic properties within the WO₃-AuNCs composite. Importantly, photoresponsive and highly reversible switching of both color and fluorescence signals was successfully achieved by simply alternating the irradiation with UV and visible light. Potential utility of photoswitchable WO₃-AuNCs composite as novel dual-mode anti-counterfeiting materials has been successfully demonstrated, including photoswitchable ink, rewritable paper and number encryption. Compared with other anti-counterfeiting materials, the present photochromic WO₃ QDs-based fluorescent switches are easily synthesized and handled, and they can provide dual security mode (color and fluorescence). This work provides a generable WO₃ QDs-assisted strategy of fabricating advanced fluorescence photoswitches for versatile optical counterfeiting applications.

Coupling Ti doping with oxygen vacancies in tungsten oxide for high-performance photochromism applications

A series of Ti-doped W₁₈O₄₉ samples were prepared using a convenient solvothermal route. Due to the synergistic effect of doped Ti and oxygen vacancies, the samples showed excellent visible-light photochromic properties. Their performances as light-printable rewritable paper and smart windows showed great application value and promotion value.

Molecular modification effects on the electrochromic and photochromic properties of diarylethene with intramolecular isomerization behavior

Diarylethene (DAE) is one of the most widely used functional units for electrochromic or photochromic materials. To better understand the molecular modification effects on the electrochromic and photochromic properties of DAE, two modification strategies, substitution with functional groups or heteroatoms, were investigated theoretically by density functional theory calculations. It is found that red-shifted absorption spectra caused by a decreased highest occupied molecular orbital-lowest unoccupied molecular orbital energy gap and S₀ → S₁ transition energy during the ring-closing reaction become more significant by adding different functional substituents. In addition, for two isomers, the energy gap and S₀ → S₁ transition energy decreased by heteroatom substitution of S atoms with O or NH, while they increased by replacing two S atoms with CH₂. For intramolecular isomerization, one-electron excitation is the most effective way to trigger the closed-ring (O → C) reaction, while the open-ring (C → O) reaction occurs most readily in the presence of one-electron reduction. Moreover, it is confirmed that substitution with strong electron donating groups (-OCH₃/-NH₂) or with one O/two CH₂ heteroatoms leads to a more favorable closed-ring (O → C) reaction. Functionalized with strong electron-withdrawing groups (-NO₂ and -COOH) or one/two NH heteroatom substitutions, the open-ring (C → O) reaction is easier. Our results confirmed that the photochromic and electrochromic properties of DAE can be tuned effectively by molecular modifications, which provides theoretical guidance for the design of new DAE-based photochromic/electrochromic materials.

Stepwise Crystallization of Millimeter Scale Thorium Cluster Single Crystals as a Bifunctional Platform for X-ray Detection and Shielding

Monitoring and shielding of X-ray radiation are of paramount importance across diverse fields. However, they are frequently realized in separate protocols and a single material integrating both functions remained elusive. Herein, a hexanuclear cluster [Th₆ (µ₃ -OH)₄ (µ₃ -O)₄ (H₂ O)₆ ](pba)₆ (HCOO)₆ (Th-pba-0D) incorporating high-Z thorium cations and 3-(pyridin-4-yl)benzoate ligands that can function as a brand-new dual-module platform for visible detection and efficient shielding of ionizing radiation is demonstrated. Th-pba-0D exhibits rather unique reversible radiochromism upon alternating X-ray and UV irradiation. Moreover, the millimeter scale crystal size of Th-pba-0D renders the penetration depth of X-ray visible to naked eye and leads to the unearthing of its high X-ray attenuation efficiency. Indeed, the shielding efficacy of Th-pba-0D is comparable to that of lead glass containing 40% PbO, and a Th-pba-0D pellet with a thickness of merely 1.2 mm can shield 99.73% X-ray (16 keV). These studies portend the possible utilization of thorium-bearing materials as a bifunctional platform for radiation detection and shielding.

Visible light responsive photoacids for subcellular pH and temperature correlated fluorescence sensing

Liao's photoacids (PAs) are a well-known type of visible light-responsive photoswitches. Here, taking advantage of the temperature-dependent thermal relaxation from the ring-closed to the ring-opened forms, PAs are proposed for the first time as a fluorescent temperature sensor in cells. The logarithmic lifetime (ln τ) of the ring-closed spiro-form exhibited an excellent linear response to the reciprocal of the temperature. In addition, the fluorescent ring-opened PAs were able to highlight lysosomes and responded to lysosomal pH changes. These properties made the PAs promising fluorescent probes in the sensing of subcellular pH and temperature.

Preparation of Lighting in the Dark and Photochromic Electrospun Glass Nanofiber-Reinforced Epoxy Nanocomposites Immobilized with Alkaline Earth Aluminates

Alkaline earth aluminates (AEAs) as photoluminescent agents and silicon dioxide-based electrospun glass nanofibers with an average diameter of 150-450 nm as a roughening agent were prepared and applied to reinforce an epoxy resin toward the development of long-persistent photoluminescent and photochromic smart materials, such as smart windows and anticounterfeiting barcodes. With the physical immobilization of lanthanide-doped aluminate nanoparticles (NPs), a light-induced luminescent transparent glass@epoxy film was developed. The glass@epoxy samples were able to alter their color to green beneath ultraviolet rays and greenish-yellow in the dark, as explored by CIE Lab and luminescence spectral analyses. The morphology of the lanthanide-doped aluminate nanoparticles (43-98 nm) was examined by transmission electron microscopy (TEM). The morphologies and chemical composition of the luminescent glass@epoxy substrates were determined by different analytical techniques. The mechanical properties of the developed photoluminescent glass@epoxy substrates were inspected to show improved scratch resistance as compared to the AEA-free substrate. The photoluminescence spectra were measured to indicate the detection of two emission bands at 494 and 525 nm when excited at 365 nm. The photoluminescent glass@epoxy hybrids with lower AEA contents have showed fast reversibility of photochromism. On the other hand, the glass@epoxy substrates with higher phosphor contents underwent persistent luminescence. Results showed that the luminescent colorless glass@epoxy hybrids have enhanced superhydrophobicity and ultraviolet blocking.

Immobilization of Strontium Aluminate into Recycled Polycarbonate Plastics towards an Afterglow and Photochromic Smart Window

A transparent smart window made of recycled polycarbonate plastic (PCP) waste was prepared and immobilized with strontium aluminate phosphor nanoparticles (SAPN). It has afterglow emission, super-hydrophobicity, durability, photostability, good mechanical properties, ultraviolet protection, and high optical transmittance. To create an afterglow emission polycarbonate smart window (SAPN@PCP), recycled polycarbonate waste was integrated with various concentrations of SAPN (15-52 nm). SAP micro-scale powder was made using the solid-state high temperature method. The SAP nanoparticles were produced using the top-down method. To create a colorless plastic bulk, recycled polycarbonate waste was inserted into a hot bath. This colorless plastic was thoroughly combined with SAPN and cast to create an afterglow luminous smart window. To investigate its photoluminescence properties, spectrum profiles of excitation and emission were measured. According to the luminescence parameters, the phosphorescent colorless polycarbonate plates displayed a change in color to strong green under UV illumination and greenish-yellow in a dark box. The afterglow polycarbonate smart window displayed two emission peaks at 496 and 526 nm, and an absorption wavelength of 373 nm. Upon increasing the SAPN ratio, the hydrophobic activity, hardness, photostability, and UV protection were improved. Luminescent polycarbonate substrates with lower SAPN ratio demonstrated rapid and reversible fluorescence under UV light, while the higher SAPN content in the luminous polycarbonate substrates showed afterglow.

Color-switchable and photoluminescent poly (vinyl chloride) for multifunctional smart applications

Recycled poly (vinyl chloride) (PVC) waste was used to prepare transparent material with long-lasting phosphorescence, photochromic activity, hydrophobicity, strong optical transmission, ultraviolet (UV) protection, and stiffness. Lanthanide-activated aluminate (LaA) microparticles were prepared via the high temperature solid state procedure, which were subjected to the top-down grinding technology to afford LaA nanoparticles (LaAN). Laminated poly (vinyl chloride) bottles were shredded into a transparent plastic matrix, which was combined with LaAN and drop-casted to produce smart materials for a variety of applications. Smart window and photochromic film for smart packaging can be made from recycled poly (vinyl chloride) waste by immobilizing it with various ratios of LaAN. Long-lasting phosphorescent translucent poly (vinyl chloride) smart window and films need LaAN to be evenly dispersed in PVC without clumping. Different analytical methods were employed to assess the materials' morphological structure and chemical composition. Photoluminescence and decay spectra were all employed to investigate the luminescence characteristics. In addition, the mechanical performance was studied. According to CIE Lab (Commission Internationale de L'éclairage) color measurements, this transparent PVC smart material becomes a bright green under UV rays and turns a greenish-yellow in the dark. The PVC luminescence was observed to exhibit an apparent emission bands at 429 and 513 nm when excited at 367 nm. Improvements have been monitored in the UV shielding and hydrophobicity with increasing the phosphor concentration. LaAN-immobilized PVC exhibited reversible photochromism. The present approach can be applied for a variety of applications, such as anticounterfeiting films for smart packaging, smart window, and warning lightening marks.

The structural origin of the efficient photochromism in natural minerals

SignificanceNatural photochromic minerals have been reported by geologists for decades. However, the understanding of the photochromism mechanism has a key question still unanswered: What in their structure gives rise to the photochromism's reversibility? By combining experimental and computational methods specifically developed to investigate this photochromism, this work provides the answer to this fundamental question. The specific crystal structure of these minerals allows an unusual motion of the sodium atoms stabilizing the electronic states associated to the colored forms. With a complete understanding of the photochromism mechanism in hand, it is now possible to design new families of stable and tunable photochromic inorganic materials-based devices.

Oxygen mobility in yttrium hydride films studied by isotopic labelling

The photochromic properties of oxygen-containing yttrium hydride thin films are directly dependent on the oxygen concentration in the material. We use 16O/18O labelling to study oxidation of YH2 films. Oxygen penetrates the film through grain boundaries and intercolumnar voids oxidising the whole film thickness, without pronounced surface oxidation or self-passivation. Once oxidised, the mobility of oxygen in the films is low and no detectable changes in chemical composition of 18O-labeled YHO films is found under illumination.

New directions in the analysis of buried interfaces for device technology by hard X-ray photoemission

Photoelectron spectroscopy is a characterization technique which plays a key role in device technology, a field requiring, very often, a reliable and reproducible analysis of buried, critical interfaces. The recent...

Synthesis of lanthanide-doped strontium aluminate nanoparticles encapsulated in polyacrylonitrile nanofibres: photoluminescence properties for anticounterfeiting applications

Photochromism has been applied as an interesting technique in order to improve the anticounterfeiting of commercial commodities. To build up a mechanically reliable anticounterfeiting nanocomposite, it has been vital to enhance the engineering process of the anticounterfeiting material. In the current study, we developed mechanically reliable and highly photoluminescent lanthanide-doped strontium aluminate nanoparticles (LSAN)/polyacrylonitrile (PAN) hybrid nanofibres successfully fabricated using an electrospinning technique for anticounterfeiting applications. The produced nanocomposite films exhibited ultraviolet-induced photochromic anticounterfeiting properties. To guarantee the transparency of the LSAN-PAN film, LSAN must be immobilized onto the nanoparticle size to allow better dispersion without aggregation in the polyacrylonitrile matrix. The LSAN-PAN nanofibrous film demonstrated absorbance intensity that exhibited at 354 nm and associated with an emission intensity at 424 nm. The produced LSAN-PAN films demonstrated an enhanced hydrophobicity when increasing the ratio of LSAN, without adversely influencing their native appearance and mechanical performance. Upon excitation with ultraviolet light, the translucent nanofibrous substrates exhibited fast and reversible photochromic activity to greenish-yellow without exhaustion. The nanofibrous films exhibited stretchability, transparency, flexibility, and ultraviolet light-induced photochromism at low cost. The current strategy can be considered as an efficient technique towards the development of various anticounterfeiting materials for a better market with economic and social values.

Quaternary type IV deep eutectic solvent-based tungsten oxide/niobium oxide photochromic and reverse fading composite complex

An excellent photochromic material based on a WO3/Nb2O5 complex with the fast fading property for promising application in optical glasses/lenses and color display devices.