Insight into Electrochemical Performance of Nitrogen-Doped Carbon/NiCo-Alloy Active Nanocomposites

What Is the Mechanism by which the Introduction of Amorphous SeOx Effectively Promotes Urea-Assisted Water Electrolysis Performance of Ni(OH)2?

Nickel hydroxide (Ni(OH)2) is considered to be one of the most promising electrocatalysts for urea oxidation reaction (UOR) under alkaline conditions due to its flexible structure, wide composition and abundant 3D electrons. However, its slow electrochemical reaction rate, high affinity for the reaction intermediate *COOH, easy exposure to low exponential crystal faces and limited metal active sites that seriously hinder the further improvement of UOR activities. Herein it is reported electrocatalyst composed of rich oxygen-vacancy (Ov) defects with amorphous SeOx-covered Ni(OH)2 (Ov-SeOx/Ni(OH)2). Surprisingly, at 100 mA cm-2, compared with Ni(OH)2 (1.46 V (vs RHE)), Ov-SeOx/Ni(OH)2 has a potential of 1.35 V. Meanwhile, Ov-SeOx/Ni(OH)2 catalyst also showed good hydrogen evolution reaction (HER) performance, so it is used as the electrolytic cell assembled by UOR and HER bifunctional catalysts and only 1.57 V could reach 100 mA cm-2. Density functional theory (DFT) study revealed that introduce of amorphous SeOx optimizes the electronic structure of the central active metal, amorphous/crystalline interfaces promote charge-carrier transfer, shift d-band center and entail numerous spin-polarized electrons during the reaction, which speeds up the UOR reaction kinetics.

Magnetic Field-Driven NiCo-3DOMC Modified Separators for Effective Lithium Polysulfide Mitigation and Catalysis

Lithium-sulfur batteries (LSBs) face challenges from the shuttle effect of lithium polysulfides (LiPSs) and slow redox kinetics. In this study, a NiCo-Doped 3D Ordered Mesoporous Carbon (NiCo-3DOMC) composite material is synthesized using a gel-crystalline template and sol-gel method to modify polypropylene separators in LSBs. Density Functional Theory calculations and experiment results demonstrate that under a magnetic field, the NiCo-3DOMC enhances adsorption and catalyzes the conversion of LiPSs, effectively mitigating the shuttle effect and boosting redox kinetics. This improvement is due to the material's porous structure and active catalytic sites. Enhanced by magnetohydrodynamic effects and NiCo spin polarization, the modified separators in LSBs deliver a high initial capacity of 1544.21 mAh g-1 at 0.1 C, maintain superior rate performance at 565.49 mAh g-1 at 3 C, and show prolonged cycling stability with only 0.06% capacity decay per cycle over 470 cycles. Even with a sulfur loading of 3.78 mg cm-2, an initial capacity of 884 mAh g-1 at 0.2 C is achieved. This approach marks a significant advancement in LSB performance, leveraging magnetic field applications to improve battery technology.

Deashing Strategy on Biomass Carbon for Achieving High-Performance Full-Supercapacitor Electrodes

The porous carbon materials, namely, MC700/800, PC700/800, and SC700/800, have been prepared using several biomasses (mushroom dreg, Chinese parasol leaves, and Siraitia grosvenorii leaves) as individual precursors at 700 and 800 °C activation temperatures. Among these carbon-negative electrodes, SC700 exhibits an impressive specific capacitance, nearly 2-fold that of commercial activated carbon (169.5 F g-1). When assembled with a Ni(OH)2 positive electrode in asymmetric supercapacitors, the SC700//Ni(OH)2 device can achieve a specific capacitance of 80 F g-1 and an energy density of 32.16 Wh kg-1 at 1700 W kg-1. In contrast, the MC700 electrode can display inferior performance potentially attributed to the high ash content in the biomass. To further optimize the activated process of the MC700 product, three deashing carbon negative electrodes (denoted as MC(H2O), MC(HF), and MC(Mix)) were prepared by deashing treatment using H2O, HF, and mixed acid, and then a modified composite positive electrode (MC700@MnO2(MCM)) has been prepared by doping with MnO2. Electrochemical testing demonstrates that the deashing strategy achieves a significant capacitance enhancement compared to the primary carbon material while maintaining excellent cyclic stability. The asymmetric supercapacitors, assembled from these decorated electrode materials, exhibited a maximum energy density of 21.08 Wh kg-1 and a power density of 1150 W kg-1 under a high-voltage window of 2.2 V. Additionally, this type of full device can power 28 LEDs for approximately 5 min.

Fabrication of Sandwiched NiCo-Layered Double Hydroxides/Carbon Nanoballs for Sustainable Energy Storage

This study presents a promising method for creating high-performance supercapacitor electrodes. The approach involves crafting a unique composite material-nickel-cobalt-layered double hydroxides (NiCo-LDH) grown on carbon nanoballs (CNBs). This is achieved by first creating a special carbon material rich in oxygen and nitrogen from a polybenzoxazine source. At first, eugenol, ethylene diamine and paraformaldehyde undergo Mannich condensation to form the benzoxazine monomer, which undergoes self-polymerization in the presence of heat to produce polybenzoxazine. This was then carbonized and activated to produce CNBs containing heteroatoms. Then, through a hydrothermal technique, NiCo-LDH nanocages are directly deposited onto the CNBs, eliminating the need for complicated templates. The amount of CNBs used plays a crucial role in performance. By optimizing the CNB content to 50%, a remarkable specific capacitance of 1220 F g-1 was achieved, along with excellent rate capability and impressive cycling stability, retaining 86% of its capacitance after 5000 cycles. Furthermore, this NiCo-LDH/CNB composite, when combined with active carbon in a supercapacitor configuration, delivered outstanding overall performance. The exceptional properties of this composite, combined with its simple and scalable synthesis process, position it as a strong contender for next-generation sustainable energy storage devices. The ease of fabrication also opens doors for its practical application in advancing energy storage technologies.

Ni Single Atom Decorated Porous Hollow Carbon Nanosphere-Based Electrodes for High Performance Symmetric Solid-State Supercapacitors

Ni single atom containing hollow carbon nanospheres with nitrogen doping has been synthesized by carbonization of Ni(NO3)2/phloroglucinol-formaldehyde polymer/silica composite. The samples have been characterized by powder X-ray diffraction, nitrogen adsorption/desorption, electron microscopic, Raman and X-ray photoelectron spectroscopic studies. The microstructure and surface area vary with the amount of Ni(NO3)2 employed in the syntheses and the carbonization environment. An optimized amount of nickel and argon as the carbonization gas afford Ni-1.0@N@HCN-Ar which possesses overall superior features. The uniformly dispersed Ni single atoms within the hollow porous carbon framework fully utilize all the electroactive sites thereby improving the supercapacitive performance. The specific capacitance of Ni-1.0@N@HCN-Ar reaches 777 F g-1 at 1 A g-1 with a Coulombic efficiency of 98.4 % and excellent recyclability. The energy and power density of Ni-1.0@N@HCN-Ar are found to be high; at 1 A g-1 its energy density is 155.4 Wh kg-1 with a power density of 600.3 W kg-1. At a high current density of 10 A g-1 the material shows a high energy density of 118.4 Wh kg-1 with excellent power density of 6003.4 W kg-1. A symmetric solid-state supercapacitor assembled with this material, Ni-1.0@N@HCN-Ar//Ni-1.0@N@HCN-Ar using H2SO4/PVA gel electrolyte shows a superior energy density value of 30 Wh kg-1 at a power density of 1200 W kg-1.

Dual Applications of Cobalt-Oxide-Grafted Carbon Quantum Dot Nanocomposite for Two Electrode Asymmetric Supercapacitors and Photocatalytic Behavior

Carbon materials, such as graphene, carbon nanotubes, and quantum-dot-doped metal oxides, are highly attractive for energy storage and environmental applications. This is due to their large surface area and efficient optical and electrochemical activity. In this particular study, a composite material of cobalt oxide and carbon quantum dots (Co3O4-CQD) was prepared using cobalt nitrate and ascorbic acid (carbon source) through a simple one-pot hydrothermal method. The properties of the composite material, including the functional groups, composition, surface area, and surface morphology, were evaluated by using various methods such as ultraviolet, Fourier transform infrared, X-ray diffraction, Raman, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller, scanning electron microscopy, and transmission electron microscopy analysis. The electrochemical performance of the Co3O4-CQD composite has been studied using a three-electrode system. The results show that at 1 A g-1, the composite delivers a higher capacitance of 1209 F g-1. The asymmetric supercapacitor (Co3O4-CQD//AC) provided 13.88 W h kg-1 energy and 684.65 W kg-1 power density with a 96% capacitance retention. The Co3O4-CQD composite also demonstrated excellent photocatalytic activity (90% in 60 min) for the degradation of methylene blue dye under UV irradiation, which is higher than that of pristine Co3O4 and CQD. This demonstrates that the Co3O4-CQD composite is a promising material for commercial energy storage and environmental applications.

Electrode Materials, Structural Design, and Storage Mechanisms in Hybrid Supercapacitors

Currently, energy storage systems are of great importance in daily life due to our dependence on portable electronic devices and hybrid electric vehicles. Among these energy storage systems, hybrid supercapacitor devices, constructed from a battery-type positive electrode and a capacitor-type negative electrode, have attracted widespread interest due to their potential applications. In general, they have a high energy density, a long cycling life, high safety, and environmental friendliness. This review first addresses the recent developments in state-of-the-art electrode materials, the structural design of electrodes, and the optimization of electrode performance. Then we summarize the possible classification of hybrid supercapacitor devices, and their potential applications. Finally, the fundamental theoretical aspects, charge-storage mechanism, and future developing trends are discussed. This review is intended to provide future research directions for the next generation of high-performance energy storage devices.

Carbon Nanodots Memristor: An Emerging Candidate toward Artificial Biosynapse and Human Sensory Perception System

In the era of big data and artificial intelligence (AI), advanced data storage and processing technologies are in urgent demand. The innovative neuromorphic algorithm and hardware based on memristor devices hold a promise to break the von Neumann bottleneck. In recent years, carbon nanodots (CDs) have emerged as a new class of nano-carbon materials, which have attracted widespread attention in the applications of chemical sensors, bioimaging, and memristors. The focus of this review is to summarize the main advances of CDs-based memristors, and their state-of-the-art applications in artificial synapses, neuromorphic computing, and human sensory perception systems. The first step is to systematically introduce the synthetic methods of CDs and their derivatives, providing instructive guidance to prepare high-quality CDs with desired properties. Then, the structure-property relationship and resistive switching mechanism of CDs-based memristors are discussed in depth. The current challenges and prospects of memristor-based artificial synapses and neuromorphic computing are also presented. Moreover, this review outlines some promising application scenarios of CDs-based memristors, including neuromorphic sensors and vision, low-energy quantum computation, and human-machine collaboration.