1
|
He J, Zhang Q, Zhou Y, Chen Y, Ge H, Tang S. Bioinspired Polymer Films with Surface Ordered Pyramid Arrays and 3D Hierarchical Pores for Enhanced Passive Radiative Cooling. ACS NANO 2024; 18:11120-11129. [PMID: 38626337 DOI: 10.1021/acsnano.3c12244] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 04/18/2024]
Abstract
Passive radiative cooling (PRC) has been acknowledged to be an environmentally friendly cooling technique, and especially artificial photonic materials with manipulating light-matter interaction ability are more favorable for PRC. However, scalable production of radiative cooling materials with advanced biologically inspired structures, fascinating properties, and high throughput is still challenging. Herein, we reported a bioinspired design combining surface ordered pyramid arrays and internal three-dimensional hierarchical pores for highly efficient PRC based on mimicking natural photonic structures of the white beetle Cyphochilus' wings. The biological photonic film consisting of surface ordered pyramid arrays with a bottom side length of 4 μm together with amounts of internal nano- and micropores was fabricated by using scalable phase separation and a quick hot-pressing process. Optimization of pore structures and surface-enhanced photonic arrays enables the bioinspired film to possess an average solar reflectance of ∼98% and a high infrared emissivity of ∼96%. A temperature drop of ∼8.8 °C below the ambient temperature is recorded in the daytime. Besides the notable PRC capability, the bioinspired film exhibits excellent flexibility, strong mechanical strength, and hydrophobicity; therefore, it can be applied in many complex outdoor scenarios. This work provides a highly efficient and mold replication-like route to develop highly efficient passive cooling devices.
Collapse
Affiliation(s)
- Jiajun He
- National Laboratory of Solid State Microstructures, Collaborative Innovation Center of Advanced Microstructures, Jiangsu Key Laboratory of Artificial Functional Materials, College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093, People's Republic of China
| | - Qingyuan Zhang
- National Laboratory of Solid State Microstructures, Collaborative Innovation Center of Advanced Microstructures, Jiangsu Key Laboratory of Artificial Functional Materials, College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093, People's Republic of China
| | - Yaya Zhou
- National Laboratory of Solid State Microstructures, Collaborative Innovation Center of Advanced Microstructures, Jiangsu Key Laboratory of Artificial Functional Materials, College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093, People's Republic of China
| | - Yu Chen
- National Laboratory of Solid State Microstructures, Collaborative Innovation Center of Advanced Microstructures, Jiangsu Key Laboratory of Artificial Functional Materials, College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093, People's Republic of China
| | - Haixiong Ge
- National Laboratory of Solid State Microstructures, Collaborative Innovation Center of Advanced Microstructures, Jiangsu Key Laboratory of Artificial Functional Materials, College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093, People's Republic of China
| | - Shaochun Tang
- National Laboratory of Solid State Microstructures, Collaborative Innovation Center of Advanced Microstructures, Jiangsu Key Laboratory of Artificial Functional Materials, College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093, People's Republic of China
| |
Collapse
|
2
|
Tao S, Cai W, Han J, Shi C, Fang Z, Lu C, Xu C, Li W, Xu Z. Construction of a Robust Radiative Cooling Emitter for Efficient Food Storage and Transportation. ACS APPLIED MATERIALS & INTERFACES 2024. [PMID: 38684025 DOI: 10.1021/acsami.4c02298] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/02/2024]
Abstract
Nowadays, food safety is still facing great challenges. During storage and transportation, perishable goods have to be kept at a low temperature. However, the current logistics still lack enough preservation ability to maintain a low temperature in the whole. Hence, considering the temperature fluctuation in logistics, in this work, the passive radiative cooling (RC) technology was applied to package to enhance the temperature control capability in food storage and transportation. The RC emitter with selective infrared emission property was fabricated by a facile coating method, and Al2O3 was added to improve the wear resistance. The sunlight reflectance and infrared emittance within atmospheric conditions could reach up to 0.92 and 0.84, respectively. After abrasion, the sunlight reflection only decreased by 0.01, and the infrared emission showed a negligible change, revealing excellent wear resistance. During outdoor measurement, the box assembled by RC emitters (RC box) was proved to achieve temperature drops of ∼9 and ∼4 °C compared with the corrugated box and foam box, respectively. Besides, the fruits stored in the RC box exhibited a lower decay rate. Additionally, after printing with patterns to meet the aesthetic requirements, the RC emitter could also maintain the cooling ability. Given the superior optical properties, wear resistance, and cooling capability, the emitter has great potential for obtaining a better temperature control ability in food storage and transportation.
Collapse
Affiliation(s)
- Shuang Tao
- College of Materials Science and Engineering, State Key Laboratory of Materials-Oriented Chemical Engineering, Nanjing Tech University, Nanjing 210009, P. R. China
- Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Nanjing Tech University, Nanjing 210009, P. R. China
| | - Weikang Cai
- College of Materials Science and Engineering, State Key Laboratory of Materials-Oriented Chemical Engineering, Nanjing Tech University, Nanjing 210009, P. R. China
- Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Nanjing Tech University, Nanjing 210009, P. R. China
| | - Jingtian Han
- College of Materials Science and Engineering, State Key Laboratory of Materials-Oriented Chemical Engineering, Nanjing Tech University, Nanjing 210009, P. R. China
- Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Nanjing Tech University, Nanjing 210009, P. R. China
| | - Chenjie Shi
- College of Materials Science and Engineering, State Key Laboratory of Materials-Oriented Chemical Engineering, Nanjing Tech University, Nanjing 210009, P. R. China
- Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Nanjing Tech University, Nanjing 210009, P. R. China
| | - Zhenggang Fang
- College of Materials Science and Engineering, State Key Laboratory of Materials-Oriented Chemical Engineering, Nanjing Tech University, Nanjing 210009, P. R. China
- Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Nanjing Tech University, Nanjing 210009, P. R. China
| | - Chunhua Lu
- College of Materials Science and Engineering, State Key Laboratory of Materials-Oriented Chemical Engineering, Nanjing Tech University, Nanjing 210009, P. R. China
- Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Nanjing Tech University, Nanjing 210009, P. R. China
- Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University, Nanjing 210009, P. R. China
| | - Chao Xu
- China Construction Yipin Investment and Development Co., Wuhan 430000, P. R. China
- China Construction Third Bureau Technology Innovation Industry Development Co., Wuhan 430000, P. R. China
| | - Wenjun Li
- China Construction Third Bureau Technology Innovation Industry Development Co., Wuhan 430000, P. R. China
| | - Zhongzi Xu
- College of Materials Science and Engineering, State Key Laboratory of Materials-Oriented Chemical Engineering, Nanjing Tech University, Nanjing 210009, P. R. China
- Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Nanjing Tech University, Nanjing 210009, P. R. China
- Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University, Nanjing 210009, P. R. China
| |
Collapse
|
3
|
Liu R, Wang S, Zhou Z, Zhang K, Wang G, Chen C, Long Y. Materials in Radiative Cooling Technologies. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024:e2401577. [PMID: 38497602 DOI: 10.1002/adma.202401577] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/30/2024] [Revised: 03/12/2024] [Indexed: 03/19/2024]
Abstract
Radiative cooling (RC) is a carbon-neutral cooling technology that utilizes thermal radiation to dissipate heat from the Earth's surface to the cold outer space. Research in the field of RC has garnered increasing interest from both academia and industry due to its potential to drive sustainable economic and environmental benefits to human society by reducing energy consumption and greenhouse gas emissions from conventional cooling systems. Materials innovation is the key to fully exploit the potential of RC. This review aims to elucidate the materials development with a focus on the design strategy including their intrinsic properties, structural formations, and performance improvement. The main types of RC materials, i.e., static-homogeneous, static-composite, dynamic, and multifunctional materials, are systematically overviewed. Future trends, possible challenges, and potential solutions are presented with perspectives in the concluding part, aiming to provide a roadmap for the future development of advanced RC materials.
Collapse
Affiliation(s)
- Rong Liu
- Department of Electronic Engineering, The Chinese University of Hong Kong, New Territories, Hong Kong SAR, 999077, China
| | - Shancheng Wang
- Department of Electronic Engineering, The Chinese University of Hong Kong, New Territories, Hong Kong SAR, 999077, China
| | - Zhengui Zhou
- Department of Electronic Engineering, The Chinese University of Hong Kong, New Territories, Hong Kong SAR, 999077, China
| | - Keyi Zhang
- Department of Electronic Engineering, The Chinese University of Hong Kong, New Territories, Hong Kong SAR, 999077, China
| | - Guanya Wang
- Department of Electronic Engineering, The Chinese University of Hong Kong, New Territories, Hong Kong SAR, 999077, China
| | - Changyuan Chen
- Department of Electronic Engineering, The Chinese University of Hong Kong, New Territories, Hong Kong SAR, 999077, China
| | - Yi Long
- Department of Electronic Engineering, The Chinese University of Hong Kong, New Territories, Hong Kong SAR, 999077, China
| |
Collapse
|
4
|
Song J, Shen Q, Shao H, Deng X. Anti-Environmental Aging Passive Daytime Radiative Cooling. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2305664. [PMID: 38148594 PMCID: PMC10933639 DOI: 10.1002/advs.202305664] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/14/2023] [Revised: 10/30/2023] [Indexed: 12/28/2023]
Abstract
Passive daytime radiative cooling technology presents a sustainable solution for combating global warming and accompanying extreme weather, with great potential for diverse applications. The key characteristics of this cooling technology are the ability to reflect most sunlight and radiate heat through the atmospheric transparency window. However, the required high solar reflectance is easily affected by environmental aging, rendering the cooling ineffective. In recent years, significant advancements have been made in understanding the failure mechanisms, design strategies, and manufacturing technologies of daytime radiative cooling. Herein, a critical review on anti-environmental aging passive daytime radiative cooling with the goal of advancing their commercial applications is presented. It is first introduced the optical mechanisms and optimization principles of radiative cooling, which serve as a basis for further endowing environmental durability. Then the environmental aging conditions of passive daytime radiative cooling, mainly focusing on UV exposure, thermal aging, surface contamination and chemical corrosion are discussed. Furthermore, the developments of anti-environmental aging passive daytime radiative cooling materials, including design strategies, fabrication techniques, structures, and performances, are reviewed and classified for the first time. Last but not the least, the remaining open challenges and the insights are presented for the further promotion of the commercialization progress.
Collapse
Affiliation(s)
- Jianing Song
- Institute of Fundamental and Frontier SciencesUniversity of Electronic Science and Technology of ChinaChengdu610054China
| | - Qingchen Shen
- Bio‐inspired Photonics GroupYusuf Hamied Department of ChemistryUniversity of CambridgeLensfield RoadCambridgeCB2 1EWUK
| | - Huijuan Shao
- Institute of Fundamental and Frontier SciencesUniversity of Electronic Science and Technology of ChinaChengdu610054China
| | - Xu Deng
- Institute of Fundamental and Frontier SciencesUniversity of Electronic Science and Technology of ChinaChengdu610054China
| |
Collapse
|
5
|
Lin K, Chen S, Zeng Y, Ho TC, Zhu Y, Wang X, Liu F, Huang B, Chao CYH, Wang Z, Tso CY. Hierarchically structured passive radiative cooling ceramic with high solar reflectivity. Science 2023; 382:691-697. [PMID: 37943925 DOI: 10.1126/science.adi4725] [Citation(s) in RCA: 9] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/28/2023] [Accepted: 09/19/2023] [Indexed: 11/12/2023]
Abstract
Passive radiative cooling using nanophotonic structures is limited by its high cost and poor compatibility with existing end uses, whereas polymeric photonic alternatives lack weather resistance and effective solar reflection. We developed a cellular ceramic that can achieve highly efficient light scattering and a near-perfect solar reflectivity of 99.6%. These qualities, coupled with high thermal emissivity, allow the ceramic to provide continuous subambient cooling in an outdoor setting with a cooling power of >130 watts per square meter at noon, demonstrating energy-saving potential on a worldwide scale. The color, weather resistance, mechanical robustness, and ability to depress the Leidenfrost effect are key features ensuring the durable and versatile nature of the cooling ceramic, thereby facilitating its commercialization in various applications, particularly building construction.
Collapse
Affiliation(s)
- Kaixin Lin
- School of Energy and Environment, City University of Hong Kong, Hong Kong, China
| | - Siru Chen
- School of Energy and Environment, City University of Hong Kong, Hong Kong, China
| | - Yijun Zeng
- Department of Mechanical Engineering, City University of Hong Kong, Hong Kong, China
- Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hong Kong, China
| | - Tsz Chung Ho
- School of Energy and Environment, City University of Hong Kong, Hong Kong, China
| | - Yihao Zhu
- School of Energy and Environment, City University of Hong Kong, Hong Kong, China
| | - Xiong Wang
- Department of Mechanical Engineering, City University of Hong Kong, Hong Kong, China
| | - Fayu Liu
- Department of Mechanical Engineering, City University of Hong Kong, Hong Kong, China
- Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hong Kong, China
| | - Baoling Huang
- Department of Mechanical and Aerospace Engineering, Hong Kong University of Science and Technology, Hong Kong, China
| | - Christopher Yu-Hang Chao
- Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hong Kong, China
- Department of Building Environment and Energy Engineering, The Hong Kong Polytechnic University, Hong Kong, China
| | - Zuankai Wang
- Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hong Kong, China
| | - Chi Yan Tso
- School of Energy and Environment, City University of Hong Kong, Hong Kong, China
| |
Collapse
|