Recent Advancements of Graphene-Based Materials for Zinc-Based Batteries: Beyond Lithium-Ion Batteries

Optimizing Mn in Prussian blue analogs with double redox active sites to induce boosted Zn2+ storage

Prussian Blue analogs (PBAs) are a suitable aqueous zinc-ion batteries (AZIBs) cathode material, but they face issues related to low specific capacity and cycling lifespan due to insufficient active sites and poor ion de-intercalation structural stability. In this study, Mn-Prussian Blue Analog (Mn-PBA) is fabricated using a simple co-precipitation method and the morphology of Mn-PBA is further optimized through artificially manipulating concentration gradients strategy, effectively enhancing the structural stability of Zn2+ de-intercalation. Furthermore, the introduction of Mn established dual Zn2+ active centers in Mn-PBA (Mn-O and Fe(CN)6]4-/[Fe(CN)6]3-), leading to an increased specific capacity. As a proof of concept for AZIBs, the optimized Mn-PBA-3 cathode exhibits a high reversible specific capacity of 143.5 mAh/g and maintains a capacity retention of 88.5 % after 250 cycles at 1 A/g, surpassing commercial MnO2 (30.5 mAh/g after 100 cycles). Mn-PBA-3 also delivers a high capacity of 79.0 mA h g-1 after 2000 cycles of 10 A/g. The mechanism of the Zn2+ double redox reaction of Mn-PBA-3 has been revealed in detail by in situ Raman and a series of ex situ techniques. Under a high operating voltage window of 0-1.9 V, Zn//Mn-PBA-3 demonstrates a capacity of 99.3 mAh/g after 800 cycles (5 A/g) by assembling zinc ion button battery. This work has reference significance for structurally modulated PBAs used in high performance AZIBs.

Atomic-Scale Characterization of Microscale Battery Particles Enabled by a High-Throughput Focused Ion Beam Milling Technique

The cathode materials in lithium-ion batteries (LIBs) require improvements to address issues such as surface degradation, short-circuiting, and the formation of dendrites. One such method for addressing these issues is using surface coatings. Coatings can be sought to improve the durability of cathode materials, but the characterization of the uniformity and stability of the coating is important to assess the performance and lifetime of these materials. For microscale particles, there are, however, challenges associated with characterizing their surface modifications by transmission electron microscopy (TEM) techniques due to the size of these particles. Often, techniques such as focused ion beam (FIB)-assisted lift-out can be used to prepare thin cross sections to enable TEM analysis, but these techniques are very time-consuming and have a relatively low throughput. The work outlined herein demonstrates a FIB technique with direct support of microscale cathode materials on a TEM grid that increases sample throughput and reduces the processing time by 60-80% (i.e., from >5 to ∼1.5 h). The demonstrated workflow incorporates an air-liquid particle assembly followed by direct particle transfer to a TEM grid, FIB milling, and subsequent TEM analysis, which was illustrated with lithium nickel cobalt aluminum oxide particles and lithium manganese nickel oxide particles. These TEM analyses included mapping the elemental composition of cross sections of the microscale particles using energy-dispersive X-ray spectroscopy. The methods developed in this study can be extended to high-throughput characterization of additional LIB cathode materials (e.g., new compositions, coating, end-of-life studies), as well as to other microparticles and their coatings as prepared for a variety of applications.

Suppressing the Shuttle Effect of Aqueous Zinc-Iodine Batteries: Progress and Prospects

Aqueous zinc-iodine batteries are considered to be one of the most promising devices for future electrical energy storage due to their low cost, high safety, high theoretical specific capacity, and multivalent properties. However, the shuttle effect currently faced by zinc-iodine batteries causes the loss of cathode active material and corrosion of the zinc anodes, limiting the large-scale application of zinc-iodine batteries. In this paper, the electrochemical processes of iodine conversion and the zinc anode, as well as the induced mechanism of the shuttle effect, are introduced from the basic configuration of the aqueous zinc-iodine battery. Then, the inhibition strategy of the shuttle effect is summarized from four aspects: the design of cathode materials, electrolyte regulation, the modification of the separator, and anode protection. Finally, the current status of aqueous zinc-iodine batteries is analyzed and recommendations and perspectives are presented. This review is expected to deepen the understanding of aqueous zinc-iodide batteries and is expected to guide the design of high-performance aqueous zinc-iodide batteries.

Rational Design of Ni-Doped V2O5@3D Ni Core/Shell Composites for High-Voltage and High-Rate Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (ZIBs) have significant potential for large energy storage systems because of their high energy density, cost-effectiveness and environmental friendliness. However, the limited voltage window, poor reaction kinetics and structural instability of cathode materials are current bottlenecks which contain the further development of ZIBs. In this work, we rationally design a Ni-doped V2O5@3D Ni core/shell composite on a carbon cloth electrode (Ni-V2O5@3D Ni@CC) by growing Ni-V2O5 on free-standing 3D Ni metal nanonets for high-voltage and high-capacity ZIBs. Impressively, embedded Ni doping increases the interlayer spacing of V2O5, extending the working voltage and improving the zinc-ion (Zn302+) reaction kinetics of the cathode materials; at the same time, the 3D structure, with its high specific surface area and superior electronic conductivity, aids in fast Zn302+ transport. Consequently, the as-designed Ni-V2O5@3D Ni@CC cathodes can operate within a wide voltage window from 0.3 to 1.8 V vs. Zn30/Zn302+ and deliver a high capacity of 270 mAh g-1 (~1050 mAh cm-3) at a high current density of 0.8 A g-1. In addition, reversible Zn2+ (de)incorporation reaction mechanisms in the Ni-V2O5@3D Ni@CC cathodes are investigated through multiple characterization methods (SEM, TEM, XRD, XPS, etc.). As a result, we achieved significant progress toward practical applications of ZIBs.