In Situ Inkjet Printing Patterned Lead Halide Perovskite Quantum Dot Color Conversion Films by Using Cheap and Eco-Friendly Aqueous Inks

Defect Regulation Strategy of Porous Persistent Phosphors for Multiple and Dynamic Information Encryption

Optical encryption technologies based on persistent luminescence material have currently drawn increasing attention due to the distinctive and long-lived optical properties, which enable multi-dimensional and dynamic optical information encryption to improve the security level. However, the controlled synthesis of persistent phosphors remains largely unexplored and it is still a great challenge to regulate the structure for optical properties optimization, which inevitably sets significant limitations on the practical application of persistent luminescent materials. Herein, a controlled synthesis method is proposed based on defect structure regulation and a series of porous persistent phosphors is obtained with different luminous intensities, lifetime, and wavelengths. By simply using diverse templates during the sol-gel process, the oxygen vacancy defects structures are successfully regulated to improve the optical properties. Additionally, the obtained series of porous Al2O3 are utilized for multi-color and dynamic optical information encryption to increase the security level. Overall, the proposed defect regulation strategy in this work is expected to provide a general and facile method for optimizing the optical properties of persistent luminescent materials, paving new ways for broadening their applications in multi-dimensional and dynamic information encryption.

Hydrochromic Effect of Perovskite-Polymer Composites

Hydrochromic materials undergo magical color changes when interacting with water and are receiving widespread attention for their frontier applications such as sensing and information security. The hydrochromic effect is observable in perovskite materials via the mechanism of water-induced fluorescence quenching. However, due to water isolation, achieving a hydrochromic effect in perovskite-polymer composite remains elusive, notwithstanding its importance as a potentially commercial-ready material. Here, we demonstrate a hydrochromic effect of perovskite-polymer-based porous composite via a nonsolvent-induced phase separation method, comprising of FA2PbBr4/poly(vinylidene fluoride) (FA = formamidinium). The naturally formed pores serve as microchannels, facilitating moisture diffusion. The penetrated water induces a phase transition of perovskite material from the nonfluorescent two-dimensional FA2PbBr4 to the fluorescent three-dimensional FAPbBr3. This work has developed the hydrochromic perovskite-polymer composites, enabling various commercial-ready chromatic applications as conceptually demonstrated custom-made fingerprint labels, quick response code anticounterfeiting labels, encrypted document protections, and water-ink inkjet printing.

Monolithic Integration of Full-Color Microdisplay Screen with Sub-5 µm Quantum-Dot Pixels

Monolithic integration of color-conversion materials onto blue-backlight micro-light-emitting-diodes (micro-LEDs) has emerged as a promising strategy for achieving full-color microdisplay devices. However, this approach still encounters challenges such as the blue-backlight leakage and the poor fabrication yield rate due to unsatisfied quantum dot (QD) material and fabrication process. Here, the monolithic integration of 0.39-inch micro-display screens displaying colorful pictures and videos are demonstrated, which are enabled by creating interfacial chemical bonds for wafer-scale adhesion of sub-5 µm QD-pixels on blue-backlight micro-LED wafer. The ligand molecule with chlorosulfonyl and silane groups is selected as the synthesis ligand and surface treatment material, facilitating the preparation of high-efficiency QD photoresist and the formation of robust chemical bonds for pixel integration. This is a leading record in micro-display devices achieving the highest brightness larger than 400 thousand nits, the ultrahigh resolution of 3300 PPI, the wide color gamut of 130.4% NTSC, and the ultimate performance of service life exceeding 1000 h. These results extend the mature integrated circuit technique into the manufacture of micro-display device, which also lead the road of industrialization process of full-color micro-LEDs.

Ultrahigh-resolution, high-fidelity quantum dot pixels patterned by dielectric electrophoretic deposition

The high pixel resolution is emerging as one of the key parameters for the next-generation displays. Despite the development of various quantum dot (QD) patterning techniques, achieving ultrahigh-resolution (>10,000 pixels per inch (PPI)) and high-fidelity QD patterns is still a tough challenge that needs to be addressed urgently. Here, we propose a novel and effective approach of orthogonal electric field-induced template-assisted dielectric electrophoretic deposition to successfully achieve one of the highest pixel resolutions of 23090 (PPI) with a high fidelity of up to 99%. Meanwhile, the proposed strategy is compatible with the preparation of QD pixels based on perovskite CsPbBr3 and conventional CdSe QDs, exhibiting a wide applicability for QD pixel fabrication. Notably, we further demonstrate the great value of our approach to achieve efficiently electroluminescent QD pixels with a peak external quantum efficiency of 16.5%. Consequently, this work provides a general approach for realizing ultrahigh-resolution and high-fidelity patterns based on various QDs and a novel method for fabricating QD-patterned devices with high performance.

Inkjet printing of heavy-metal-free quantum dots-based devices: a review

Inkjet printing (IJP) has become a versatile, cost-effective technology for fabricating organic and hybrid electronic devices. Heavy-metal-based quantum dots (HM QDs) play a significant role in these inkjet-printed devices due to their excellent optoelectrical properties. Despite their utility, the intrinsic toxicity of HM QDs limits their applications in commercial products. To address this limitation, developing alternative HM-free quantum dots (HMF QDs) that have equivalent optoelectronic properties to HM QD is a promising approach to reduce toxicity and environmental impact. This article comprehensively reviews HMF QD-based devices fabricated using IJP methods. The discussion includes the basics of IJP technology, the formulation of printable HMF QD inks, and solutions to the coffee ring effect. Additionally, this review briefly explores the performance of typical state-of-the-art HMF QDs and cutting-edge characterization techniques for QD inks and printed QD films. The performance of printed devices based on HMF QDs is discussed and compared with those fabricated by other techniques. In the conclusion, the persisting challenges are identified, and perspectives on potential avenues for further progress in this rapidly developing research field are provided.

Electrohydrodynamic Inkjet Printing of Three-Dimensional Perovskite Nanocrystal Arrays for Full-Color Micro-LED Displays

Perovskite nanocrystal (PeNC) arrays are showing a promising future in the next generation of micro-light-emitting-diode (micro-LED) displays due to the narrow emission linewidth and adjustable peak wavelength. Electrohydrodynamic (EHD) inkjet printing, with merits of high resolution, uniformity, versatility, and cost-effectiveness, is among the competent candidates for constructing PeNC arrays. However, the fabrication of red light-emitting CsPbBrxI(3-x) nanocrystal arrays for micro-LED displays still faces challenges, such as low brightness and poor stability. This work proposes a design for a red PeNC colloidal ink that is specialized for the EHD inkjet printing of three-dimensional PeNC arrays with enhanced luminescence and stability as well as being adaptable to both rigid and flexible substrates. Made of a mixture of PeNCs, polymer polystyrene (PS), and a nonpolar xylene solvent, the PeNC colloidal ink enables precise control of array sizes and shapes, which facilitates on-demand micropillar construction. Additionally, the inclusion of PS significantly increases the brightness and environmental stability. By adopting this ink, the EHD printer successfully fabricated full-color 3D PeNC arrays with a spatial resolution over 2500 ppi. It shows the potential of the EHD inkjet printing strategy for high-resolution and robust PeNC color conversion layers for micro-LED displays.

Water-Soluble Quantum Dots for Inkjet Printing Color Conversion Films with Simultaneous High Efficiency and Stability

Water-soluble quantum dots (QDs) are necessary to prepare patterned pixels or films for high-resolution displays with less environmental burden but are very limited by the trade-off between photoluminescence and stability of QDs. In this work, we proposed synthesizing water-soluble QDs with simultaneous excellent luminescence properties and high stability by coating the amphiphilic poly(maleic anhydride-alt-1-octadecene)-ethanol amine (PMAO-EA) polymer on the surface of silane-treated QDs. These coated QDs show a photoluminescence quantum yield (PLQY) as high as 94%, and they have good photoluminescence stability against light irradiation and thermal attacks, owing to the suppression of the nonradiative recombination by the polymer layer and the isolation of oxygen and water by the silica layer. The water-soluble QDs, mixed with ethylene glycol, enable inkjet printing of QD color conversion films (QD-CCFs) with an average diameter of 68 μm for each pixel and a high PLQY of 91%. The QD-CCFs are demonstrated to fabricate red-emitting mini-LEDs by combining with blue mini-LED chips, which have an external quantum efficiency as high as 25.86% and a luminance of 2.44 × 107 cd/m2. We believe that the proposed strategy is applicable to other water-soluble QDs and paves an avenue for inkjet printing environmentally friendly QD-CCFs for mini/micro-LED displays.

The Creation of Multimode Luminescent Phosphor through an Oxygen Vacancy Center for High-Level Anticounterfeiting

Integrating multimode optical properties into a single material simultaneously is promising for improving the security level of fluorescent anticounterfeiting. However, there has been a lack of affirmative principles and unambiguous mechanisms that guide the design of such material. Herein, we achieve color-tunable photoluminescence, long-lived persistent emission, thermally stimulated luminescence, and reversible photochromism in a Tb3+-activated Mg4Ga8Ge2O20 phosphor by employing the F-like color center as an energy reservoir. It is experimentally revealed that the role of oxygen vacancies in the lattice of Mg4Ga8Ge2O20 is assumed as the main trap for the photogenerated electronic carriers, which is the origin of metastable F-like color centers. The formed color centers with the estimated depths of 0.48-0.95 eV could suppress the recombination of electron-hole pairs, thus giving rise to good photochromism and persistent emission properties, while under various modes of stimulation such as thermal attack or photo radiation, a quick recombination of electron holes happens, accounting for the bright thermally stimulated luminescence and the accompanied color bleaching. Finally, we fabricate a flexible phosphor/polymer composite by encapsulating the developed phosphor into a polydimethylsiloxane matrix, and conceptual demonstration of the composite for the high-security fluorescent anticounterfeiting technology, by virtue of multimode optical phenomena as authentication signals.

Recent Advances in Patterning Strategies for Full-Color Perovskite Light-Emitting Diodes

Metal halide perovskites have emerged as promising light-emitting materials for next-generation displays owing to their remarkable material characteristics including broad color tunability, pure color emission with remarkably narrow bandwidths, high quantum yield, and solution processability. Despite recent advances have pushed the luminance efficiency of monochromic perovskite light-emitting diodes (PeLEDs) to their theoretical limits, their current fabrication using the spin-coating process poses limitations for fabrication of full-color displays. To integrate PeLEDs into full-color display panels, it is crucial to pattern red-green-blue (RGB) perovskite pixels, while mitigating issues such as cross-contamination and reductions in luminous efficiency. Herein, we present state-of-the-art patterning technologies for the development of full-color PeLEDs. First, we highlight recent advances in the development of efficient PeLEDs. Second, we discuss various patterning techniques of MPHs (i.e., photolithography, inkjet printing, electron beam lithography and laser-assisted lithography, electrohydrodynamic jet printing, thermal evaporation, and transfer printing) for fabrication of RGB pixelated displays. These patterning techniques can be classified into two distinct approaches: in situ crystallization patterning using perovskite precursors and patterning of colloidal perovskite nanocrystals. This review highlights advancements and limitations in patterning techniques for PeLEDs, paving the way for integrating PeLEDs into full-color panels.

Multiple-Channel Information Encryption Based on Quantum Dot Absorption Spectra

Large-capacity information encryption has attracted significant interest in the information age. The diversity and controllability of spectra have positioned them to be widely applied for information encryption. Current spectra-based information encryption methods commonly rely on either spectral alteration induced by external stimuli or the utilization of narrowband channels within spectra. However, these methods encounter a common challenge in attaining both high security and large capacity simultaneously. To address these issues, we propose a multiple-channel information encryption system based on quantum dot (QD) absorption spectra. The diversity of QD absorption spectra and their broadband features ensure that the encrypted spectra can hardly be decrypted without knowing the correct channel matrix. Meanwhile, the large capacity is realized through the combination of multiple QD spectral channels with a theoretical maximum capacity of 24.0 bits in a single spectrum. In order to optimize the performance of our proposed system, the selection principle of the channel matrix is established to achieve the rapid identification of the optimal channel matrix in several milliseconds. The additivity of QD spectral channels and the consistency of QD spectra are also explored to minimize the impact of errors on information decryption. Furthermore, two spectral encryption scenarios of spatial pattern and spectral pattern are applied to demonstrate the feasibility, showcasing their ability to achieve both a high level of security and large capacity. Owing to the advantages offered by QD spectra, the QD spectra-based information system exhibits excellent potential for broader applications in information storage, authentication, and computing.

Large area inkjet-printed OLED fabrication with solution-processed TADF ink

This work demonstrates successful large area inkjet printing of a thermally activated delayed fluorescence (TADF) material as the emitting layer of organic light-emitting diodes (OLEDs). TADF materials enable efficient light emission without relying on heavy metals such as platinum or iridium. However, low-cost manufacturing of large-scale TADF OLEDs has been restricted due to their incompatibility with solution processing techniques. In this study, we develop ink formulation for a TADF material and show successful ink jet printing of intricate patterns over a large area (6400 mm2) without the use of any lithography. The stable ink is successfully achieved using a non-chlorinated binary solvent mixture for a solution processable TADF material, 3-(9,9-dimethylacridin-10(9H)-yl)-9H-xanthen-9-one dispersed in 4,4'-bis-(N-carbazolyl)-1,1'-biphenyl host. Using this ink, large area ink jet printed OLEDs with performance comparable to the control spin coated OLEDs are successfully achieved. In this work, we also show the impact of ink viscosity, density, and surface tension on the droplet formation and film quality as well as its potential for large-area roll-to-roll printing on a flexible substrate. The results represent a major step towards the use of TADF materials for large-area OLEDs without employing any lithography.

Inverse design of chiral functional films by a robotic AI-guided system

Artificial chiral materials and nanostructures with strong and tuneable chiroptical activities, including sign, magnitude, and wavelength distribution, are useful owing to their potential applications in chiral sensing, enantioselective catalysis, and chiroptical devices. Thus, the inverse design and customized manufacturing of these materials is highly desirable. Here, we use an artificial intelligence (AI) guided robotic chemist to accurately predict chiroptical activities from the experimental absorption spectra and structure/process parameters, and generate chiral films with targeted chiroptical activities across the full visible spectrum. The robotic AI-chemist carries out the entire process, including chiral film construction, characterization, and testing. A machine learned reverse design model using spectrum embedded descriptors is developed to predict optimal structure/process parameters for any targeted chiroptical property. A series of chiral films with a dissymmetry factor as high as 1.9 (gabs ~ 1.9) are identified out of more than 100 million possible structures, and their feasible application in circular polarization-selective color filters for multiplex laser display and switchable circularly polarized (CP) luminescence is demonstrated. Our findings not only provide chiral films with the highest reported chiroptical activity, but also have great fundamental value for the inverse design of chiroptical materials.

Ligand-Crosslinking Strategy for Efficient Quantum Dot Light-Emitting Diodes via Thiol-Ene Click Chemistry

While solution-processable colloidal quantum dots (QDs) offer cost-effective and large-scale manufacturing, they can be susceptible to subsequent solution processes, making continuous processing challenging. To enable complex and integrated device architectures, robust QD films with subsequent patterning are necessary. Here, we report a facile ligand-crosslinking strategy based on thiol-ene click chemistry. Thiol molecules added to QD films react with UV light to form radicals that crosslink with QD ligands containing carbon double bonds, enabling microscale photo-patterning of QD films and enhancing their solvent resistance. This strategy can also be extended to other ligand-capped nanocrystals. It is found that the swelling of QD films during the process of binding with the thiol molecules placed between the ligands contributes to the improvement of photoluminescence and electroluminescence properties. These results suggest that the thiol-ene crosslinking modifies the optoelectronic properties and enables direct optical patterning, expanding the potential applications of QDs.

High-Resolution Patterning of Perovskite Quantum Dots via Femtosecond Laser-Induced Forward Transfer

High-resolution patterning of perovskite quantum dots (PQDs) is of significant importance for satisfying various practical applications, including high-resolution displays and image sensing. However, due to the limitation of the instability of PQDs, the existing patterning strategy always involves chemical reagent treatment or mask contact that is not suitable for PQDs. Therefore, it is still a challenge to fabricate high-resolution full-color PQD arrays. Here, we present a femtosecond laser-induced forward transfer (FsLIFT) technology, which enables the programmable fabrication of high-resolution full-color PQD arrays and arbitrary micropatterns. The FsLIFT process integrates transfer, deposition, patterning, and alignment in one step without involving a mask and chemical reagent treatment, guaranteeing the preservation of the photophysical properties of PQDs. A full-color PQD array with a high resolution of 2 μm has been successfully achieved. We anticipate that our facile and flexible FsLIFT technology can facilitate the development of diverse practical applications based on patterned PQDs.

Advances in Microscale Droplet Generation and Manipulation

Microscale droplet generation and manipulation have widespread applications in numerous fields, from biochemical assays to printing and additive manufacturing. There are several techniques for droplet handling. Most techniques, however, can generate and work with only a limited range of droplet sizes. Furthermore, there are constraints regarding the workable variety of fluid properties (e.g., viscosity, surface tension, mass loading, etc.). Recent works have focused on developing techniques to overcome these limitations. This feature article discusses advances in this area that cover a wide range of droplet sizes from subpicoliter to microliter.

Inorganic Halide Perovskite Quantum Dots: A Versatile Nanomaterial Platform for Electronic Applications

Metal halide perovskites have generated significant attention in recent years because of their extraordinary physical properties and photovoltaic performance. Among these, inorganic perovskite quantum dots (QDs) stand out for their prominent merits, such as quantum confinement effects, high photoluminescence quantum yield, and defect-tolerant structures. Additionally, ligand engineering and an all-inorganic composition lead to a robust platform for ambient-stable QD devices. This review presents the state-of-the-art research progress on inorganic perovskite QDs, emphasizing their electronic applications. In detail, the physical properties of inorganic perovskite QDs will be introduced first, followed by a discussion of synthesis methods and growth control. Afterwards, the emerging applications of inorganic perovskite QDs in electronics, including transistors and memories, will be presented. Finally, this review will provide an outlook on potential strategies for advancing inorganic perovskite QD technologies.

Weakening Ligand-Liquid Affinity to Suppress the Desorption of Surface-Passivated Ligands from Perovskite Nanocrystals

The interfacial migration of surface-bound ligands highly affects the colloidal stability and optical quality of semiconductor nanocrystals, of which the underlying mechanism is not fully understood. Herein, colloidal CsPbBr₃ perovskite nanocrystals (PNCs) with fragile dynamic equilibrium of ligands are taken as the examples to reveal the important role of balancing ligand-solid/solvent affinity in suppressing the desorption of ligands. As a micellar surfactant, glycyrrhizic acid (GA) with bulky hydrophobic and hydrophilic groups exhibits a relatively smaller diffusion coefficient (∼440 μm²/s in methanol) and weaker ligand-liquid affinity than that of conventional alkyl amine and carboxy ligands. Consequently, hydrophilic GA-passivated PNCs (PNCs-GA) show excellent colloidal stability in various polar solvents with dielectric constant ranging from 2.2 to 32.6 and efficient photoluminescence with a quantum yield of 85.3%. Due to the suppressed desorption of GA, the morphological and optical properties of PNCs-GA are well maintained after five rounds purification and two months long-term storage. At last, hydrophilic PNCs-GA are successfully patterned through inkjet- and screen-printing technology. These findings offer deep insights into the interfacial chemistry of colloidal NCs and provide a universal strategy for preparing high-quality hydrophilic PNCs.

Tuning Multicolor Emission of Manganese-Activated Gallogermanate Nanophosphors by Regulating Mn Ions Occupying Sites for Multiple Anti-Counterfeiting Application

The ability to manipulate the luminescent color, intensity and long lifetime of nanophosphors is important for anti-counterfeiting applications. Unfortunately, persistent luminescence materials with multimode luminescent features have rarely been reported, even though they are expected to be highly desirable in sophisticated anti-counterfeiting. Here, the luminescence properties of Zn₃Ga₂GeO₈:Mn phosphors were tuned by using different preparation approaches, including a hydrothermal method and solid-state reaction approach combining with non-equivalent ion doping strategy. As a result, Mn-activated Zn₃Ga₂GeO₈ phosphors synthesized by a hydrothermal method demonstrate an enhanced red photoluminescence at 701 nm and a strong green luminescence with persistent luminescence and photostimulated luminescence at 540 nm. While Mn-activated Zn₃Ga₂GeO₈ phosphors synthesized by solid-state reactions combined with a hetero-valent doping approach only exhibit an enhanced single-band red emission. Keeping the synthetic method unchanged, the substitution of hetero-valent dopant ion Li⁺ into different sites is valid for spectral fine-tuning. A spectral tuning mechanism is also proposed. Mn-activated Zn₃Ga₂GeO₈ phosphors synthesized by a hydrothermal approach with multimodal luminescence is especially suitable for multiple anti-counterfeiting, multicolor display and other potential applications.

One-step spray coating strategy toward a highly uniform large-area CsPbBr3@PMMA composite film for backlit display

The large-scale and continuous production of CsPbBr₃@PMMA composite film is realized by the in-situ ultrasonic spray coating method at room temperature. Through embedding CsPbBr₃ nanocrystals into the hydrophobic polymer framework, the as-fabricated films (20 cm × 20 cm) exhibit uniform green emissions with a relatively high PLQYs of 76%, and could maintain 80% PL intensity after 3 months storage under ambient conditions. Assembling the green-emissive CsPbBr₃@PMMA film and the red-emissive KSF@PMMA film with blue LED chip, a high-performance LCD is obtained, reaching a higher saturation with 126% and 94% color gamut of NTSC and Rec.2020, respectively. This work demonstrates that ultrasonic spray coating technique could be widely used in the large-scale fabrication of uniformly high-quality perovskite films for backlight application.

Micropore filling fabrication of high resolution patterned PQDs with a pixel size less than 5 μm

PQDs are promising color converters for micro-LED applications. Here we report the micropore filling fabrication of high resolution patterned PQDs with a pixel size of 2 μm using a template with SU8 micropores.

Colloidal Quantum Dot Solar Cells: Progressive Deposition Techniques and Future Prospects on Large-Area Fabrication

Colloidally grown nanosized semiconductors yield extremely high-quality optoelectronic materials. Many examples have pointed to near perfect photoluminescence quantum yields, allowing for technology-leading materials such as high purity color centers in display technology. Furthermore, because of high chemical yield, and improved understanding of the surfaces, these materials, particularly colloidal quantum dots (QDs) can also be ideal candidates for other optoelectronic applications. Given the urgent necessity toward carbon neutrality, electricity from solar photovoltaics will play a large role in the power generation sector. QDs are developed and shown dramatic improvements over the past 15 years as photoactive materials in photovoltaics with various innovative deposition properties which can lead to exceptionally low-cost and high-performance devices. Once the key issues related to charge transport in optically thick arrays are addressed, QD-based photovoltaic technology can become a better candidate for practical application. In this article, the authors show how the possibilities of different deposition techniques can bring QD-based solar cells to the industrial level and discuss the challenges for perovskite QD solar cells in particular, to achieve large-area fabrication for further advancing technology to solve pivotal energy and environmental issues.

What Happens When Halide Perovskites Meet with Water?

Halide perovskites are considered to be next-generation semiconductor materials with bright prospects to advance the technology of photonics and optoelectronics. Because of the intrinsic ionic feature, the interactions between perovskites and water induce serious stability issues, which has been one of the fundamental problems hindering the practical application of perovskites. The degradation of halide perovskites upon water exposure has been intensively studied, resulting in chemical insights into key processes, including hydration, phase transformation, decomposition, and dissolution. In this Perspective, we try to illustrate what happens when halide perovskites meet with water. We summarize the research progress regarding the understanding of these processes and discuss the principle of strategy design toward improved stability against water. In addition to the instability-related interactions, we also discuss the aqueous solution of perovskite precursors for fabricating perovskite-based functional materials. Hopefully, this Perspective can inspire more fundamental studies on the interactions between perovskites and water, such as spectroscopy and simulation, crystal structure and material characterizations, and solution chemistry and crystallization.

A Universal Ternary-Solvent-Ink Strategy toward Efficient Inkjet-Printed Perovskite Quantum Dot Light-Emitting Diodes

Toward next-generation electroluminescent quantum dot (QD) displays, inkjet printing technique has been convinced as one of the most promising low-cost and large-scale manufacturing of patterned quantum dot light-emitting diodes (QLEDs). The development of high-quality and stable QD inks is a key step to push this technology toward practical applications. Herein, a universal ternary-solvent-ink strategy is proposed for the cesium lead halides (CsPbX₃ ) perovskite QDs and their corresponding inkjet-printed QLEDs. With this tailor-made ternary halogen-free solvent (naphthene, n-tridecane, and n-nonane) recipe, a highly dispersive and stable CsPbX₃ QD ink is obtained, which exhibits much better printability and film-forming ability than that of the binary solvent (naphthene and n-tridecane) system, leading to a much better qualitied perovskite QD thin film. Consequently, a record peak external quantum efficiency (EQE) of 8.54% and maximum luminance of 43 883.39 cd m^-2 is achieved in inkjet-printed green perovskite QLEDs, which is much higher than that of the binary-solvent-system-based devices (EQE = 2.26%). Moreover, the ternary-solvent-system exhibits a universal applicability in the inkjet-printed red and blue perovskite QLEDs as well as cadmium (Cd)-based QLEDs. This work demonstrates a new strategy for tailor-making a general ternary-solvent-QD-ink system for efficient inkjet-printed QLEDs as well as the other solution-processed electronic devices in the future.

Three-dimensional direct lithography of stable perovskite nanocrystals in glass

Material composition engineering and device fabrication of perovskite nanocrystals (PNCs) in solution can introduce organic contamination and entail several synthetic, processing, and stabilization steps. We report three-dimensional (3D) direct lithography of PNCs with tunable composition and bandgap in glass. The halide ion distribution was controlled at the nanoscale with ultrafast laser-induced liquid nanophase separation. The PNCs exhibit notable stability against ultraviolet irradiation, organic solution, and high temperatures (up to 250°C). Printed 3D structures in glass were used for optical storage, micro-light emitting diodes, and holographic displays. The proposed mechanisms of both PNC formation and composition tunability were verified.