Advances on the Application of Wide Band-Gap Insulating Materials in Perovskite Solar Cells

Fluorinated Polyimide Tunneling Layer for Efficient and Stable Perovskite Photovoltaics

Despite the remarkable progress of perovskite solar cells (PSCs), challenges remain in terms of finding effective and viable strategies to enhance their long-term stability while maintaining high efficiency. In this study, a new insulating and hydrophobic fluorinated polyimide (FPI: 6FDA-6FAPB) was used as the interface layer between the perovskite layer and the hole transport layer (HTL) in PSCs. The functional groups of FPI play a pivotal role in passivating interface defects within the device. Due to its high work function, FPI demonstrates field-effect passivation (FEP) capabilities as an interface layer, effectively mitigating non-radiative recombination at the interface. Notably, the FPI insulating interface layer does not impede carrier transmission at the interface, which is attributed to the presence of hole tunneling effects. The optimized PSCs achieve an outstanding power conversion efficiency (PCE) of 24.61 % and demonstrate excellent stability, showcasing the efficacy of FPI in enhancing device performance and reliability.

Polyvinyl Pyrrolidone Induced "Confinement Effect" on PbI2 and the Improvement on Crystallization and Thermal Stability of Perovskite

Polyvinyl pyrrolidone is blended in PbI2 with varied concentration, so as to study the coarsening dynamics of perovskite during the two-step growth method. It is observed that polyvinyl pyrrolidone hinders the crystallization of PbI2 and helps to form a more amorphous PbI2 matrix, which then improves perovskite crystallization. As the blending concentration increases from 0 to 2 mM, average crystallite/grain size of perovskite increases from 40.29 nm/0.79 µm to 84.35 nm/1.02 µm while surface fluctuation decreases slightly from 25.64 to 23.96 nm. The observations are caused by the "confinement effect" brought by polyvinyl pyrrolidone on PbI2 . Elevating blending concentration of polyvinyl pyrrolidone results in smaller PbI2 crystallites and more amorphous PbI2 matrix, thus reducing the diffusion/reaction barrier between PbI2 and organic salt and favoring perovskite crystallization. As blending concentration increases from 0 to 2 mM, the device efficiency rises from 19.76 (± 0.60) % to 20.50 (± 0.89) %, with the optimized value up to 22.05%, which is further improved to 24.48% after n-Octylammonium iodide (OAI)-basing surface modification. The study enlarges the scope of "confinement effect" brought by polymer molecules, which is beneficial for efficient and stable perovskite solar cell fabrication.

High-Quality Hybrid Perovskite Thin Films by Post-Treatment Technologies in Photovoltaic Applications

Incredible progress in photovoltaic devices based on hybrid perovskite materials has been made in the past few decades, and a record-certified power conversion efficiency (PCE) of over 26% has been achieved in single-junction perovskite solar cells (PSCs). In the fabrication of high-efficiency PSCs, the postprocessing procedures toward perovskites are essential for designing high-quality perovskite thin films; developing efficient and reliable post-treatment techniques is very important to promote the progress of PSCs. Here, recent post-treatment technological reforms toward perovskite thin films are summarized, and the principal functions of the post-treatment strategies on the design of high-quality perovskite films have been thoroughly analyzed by dividing into two categories in this review: thermal annealing (TA)-related technique and TA-free technique. The latest research progress of the above two types of post-treatment techniques is summarized and discussed, focusing on the optimization of postprocessing conditions, the regulation of perovskite qualities, and the enhancement of device performance. Finally, an outlook of the prospect trends and future challenges for the fabrication of the perovskite layer and the production of highly efficient PSCs is given.