A Review on Recent Advances in the Application of Nanocatalysts in A 3 Coupling Reactions

Stabilization of copper nanoparticles onto the double Schiff-base-functionalized ZSM-5 for A3 coupling reaction catalysis aimed under mild conditions

In this research a highly efficient and heterogeneous catalyst of ZSM-5@APTMS@(E)-4-((pyridin-2-ylimino)methyl) benzaldehyde@Cu-NPs was synthesized for upgrading the A3 coupling reaction for the synthesis of propargylamines under mild conditions. Rational tuning of the microenvironment of metallic NPs to improve efficiency and reusability in catalytic performances is of significance for scalable applications. Firstly, ZSM-5 was immobilized with APTMS (3-aminopropyltrimethoxysilane) and further modified with (E)-4-((pyridin-2-ylimino)methyl)benzaldehyde. Subsequently, the amine-activated zeolite@(E)-4-((pyridin-2-ylimino)methyl)benzaldehyde was applied to increase the stabilization of Cu metal nanoparticles. The catalyst was treated with hydrazine to reduce Cu(ii) to Cu(0), which led to active metal sites. The results of catalytic performance in comparison with different parts of catalysis indicate high efficiency due to the stabilization of copper nanoparticles onto the newly synthesized support of MOF modified with nitrogen aromatic groups. The addition of N-rich organic ligand through modification alters the electronic structure of the final composite in favor of the progress of the A3-coupling reaction. Moreover, the proposed catalyst showed no reduction in the catalytic performance up to four cycles, and a minor loss of efficiency occurs after the seventh cycle. In addition, the catalyst was effectively recycled up to 7 times without leaching of Cu-NPs.

Gold nanoparticle decorated dithiocarbamate modified natural boehmite as a catalyst for the synthesis of biologically essential propargylamines

Here, we prepare an Au NP decorated dithiocarbamate functionalized boehmite (γ-AlO(OH)@C-NHCS2H·AuNPs). This stepwise synthetic method gives an efficient, cost-effective, and green heterogenous Au-based nanocatalyst for the A3-coupling preparation of the biologically essential propargylamines. Different characterization methods, including FT-IR, XRD, SEM, TEM, EDX spectra, and elemental SEM-mapping, were employed to investigate the structure of the manufactured γ-AlO(OH)@C-NHCS2H·AuNPs. Then we used the prepared composite as a heterogeneous gold-based nanocatalyst for the one-pot A3-coupling preparation of propargyl amines by reacting a variety of aldehydes, amines, and phenylacetylene which exhibited promising results.

Grafting Copper Atoms and Nanoparticles on Double-Walled Carbon Nanotubes: Application to Catalytic Synthesis of Propargylamine

The decoration of carbon nanotubes (CNTs) by metal nanoparticles (NPs) combines the advantages of a high specific surface material with catalytic properties of metal nanocrystals. Little work has been devoted to the decoration of CNTs with copper NPs, and no evidence of copper atomic decoration of CNTs has shown up until now. Herein, we demonstrate that the strong acidic oxidation of double-walled CNTs (dwCNTs) is very efficient for the decoration of the carbon surface by copper NPs and atoms. This treatment severely degraded the CNT walls and generated a large amount of disordered sp³ carbon. This amorphous carbon film bears many chemically active functions like carboxyl and hydroxyl ones. In such conditions, the CNT walls behave as very efficient ligands for the stabilization of copper obtained by the thermolysis of the mesityl precursor in organic solution under mild dihydrogen pressure. In addition to copper NPs, we evidenced the presence of a regular coverage with copper atoms over the dwCNTs. This nanocomposite catalyzes the quantitative synthesis of propargylamines via one A³-type coupling reaction. Five consecutive catalytic cycles with 100% yield could be performed with no loss of activity, and the combination of Cu supported on dwCNTs allows a facile recycling of the catalytic material.

Spray-Assisted Interfacial Polymerization to Form CuII/I@CMC-PANI Film: An Efficient Dip Catalyst for A3 Reaction

A novel and interesting method for the preparation of carboxymethylcellulose-polyaniline film-supported copper catalyst (CuII/I@CMC-PANI) has been developed via spray-assisted interfacial polymerization. Using copper sulfate as an initiator, spraying technology was introduced to form a unique interface that is perfectly beneficial to the polymerization of aniline monomers onto carboxymethylcellulose macromolecule chains. To further confirm the composition and structure of the as-prepared hybrid film, it was systematically characterized by inductively coupled plasma (ICP), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and thermogravimetric analysis (TGA) techniques. The Cu content in the fresh CuII/I@CMC-PANI film was determined to be 1.805 mmol/g, and spherical nanoparticles with an average size of ca. 10.04 nm could be observed in the hybrid film. The CuII/I@CMC-PANI hybrid film was exerted as a dip catalyst to catalyze the aldehyde-alkyne-amine (A3) coupling reactions. High yields of the products (up to 97%) were obtained in this catalytic system, and the catalyst could be easily picked up from the reaction mixture by tweezers and reused for at least six consecutive runs, without any discernible losses in its activity in the model reaction. The dip catalyst of CuII/I@CMC-PANI, with easy fabrication, convenient deployment, superior catalytic activity, and great reusability, is expected to be very useful in organic synthesis.

Bio-Based (Chitosan-ZnO) Nanocomposite: Synthesis, Characterization, and Its Use as Recyclable, Ecofriendly Biocatalyst for Synthesis of Thiazoles Tethered Azo Groups

In recent years, nanotechnology has become a considerable research interest in the area of preparation of nanocatalysts based on naturally occurring polysaccharides. Chitosan (CS), as a naturally occurring biodegradable and biocompatible polysaccharide, is successfully utilized as an ideal template for the immobilization of metal oxide nanoparticles. In this study, zinc oxide nanoparticles have been doped within a chitosan matrix at dissimilar weight percentages (5, 10, 15, 20, and 25 wt.% CS/ZnO) and have been fabricated by using a simple solution casting method. The prepared solutions of the nanocomposites were cast in a Petri-dish and were subsequently shaped as a thin film. After that, the structural features of the nanocomposite film have been studied by measuring the FTIR, SEM, and XRD analytical tools. FTIR spectra showed the presence of some changes in the major characteristic peaks of chitosan due to interaction with ZnO nanoparticles. In addition, SEM graphs exhibited dramatic morphology changes on the chitosan surface, which is attributed to the surface adsorption of ZnO molecules. Based on the results of the investigated organic catalytic reactions, the prepared CS/ZnO nanocomposite film (20 wt.%) could be a viable an effective, recyclable, and heterogeneous base catalyst in the synthesis of thiazoles. The results showed that the nanocomposite film is chemically stable and can be collected and reused in the investigated catalytic reactions more than three times without loss of its catalytic activity.

Catalytic Approaches to Multicomponent Reactions: A Critical Review and Perspectives on the Roles of Catalysis

In this review, we comprehensively describe catalyzed multicomponent reactions (MCRs) and the multiple roles of catalysis combined with key parameters to perform these transformations. Besides improving yields and shortening reaction times, catalysis is vital to achieving greener protocols and to furthering the MCR field of research. Considering that MCRs typically have two or more possible reaction pathways to explain the transformation, catalysis is essential for selecting a reaction route and avoiding byproduct formation. Key parameters, such as temperature, catalyst amounts and reagent quantities, were analyzed. Solvent effects, which are likely the most neglected topic in MCRs, as well as their combined roles with catalysis, are critically discussed. Stereocontrolled MCRs, rarely observed without the presence of a catalytic system, are also presented and discussed in this review. Perspectives on the use of catalytic systems for improved and greener MCRs are finally presented.

Copper nanocatalysts applied in coupling reactions: a mechanistic insight

Copper-based nanocatalysts have seen great interest for use in synthetic applications since the early 20th century, as evidenced by the exponential number of contributions reported (since 2000, more than 48 000 works published out of about 81 300 since 1900; results from SciFinder using "copper nanocatalysts in organic synthesis" as keywords). These huge efforts are mainly based on two key aspects: (i) copper is an Earth-abundant metal with low toxicity, leading to inexpensive and eco-friendly catalytic materials; and (ii) copper can stabilize different oxidation states (0 to +3) for molecular and nanoparticle-based systems, which promotes different types of metal-reagent interactions. This chemical versatility allows different pathways, involving radical or ionic copper-based intermediates. Thus, copper-based nanoparticles have become convenient catalysts, in particular for couplings (both homo- and hetero-couplings), transformations that are involved in a remarkable number of processes affording organic compounds, which find interest in different fields (medicinal chemistry, natural products, drugs, materials, etc.). Clearly, this richness in reactivity makes understanding the mechanisms more complex. The present review focuses on the analysis of reported contributions using monometallic copper-based nanoparticles as catalytic precursors applied in coupling reactions, paying attention to those shedding light on the reaction mechanism.

Lignin, lipid, protein, hyaluronic acid, starch, cellulose, gum, pectin, alginate and chitosan-based nanomaterials for cancer nanotherapy: Challenges and opportunities

Although nanotechnology-driven drug delivery systems are relatively new, they are rapidly evolving since the nanomaterials are deployed as effective means of diagnosis and delivery of assorted therapeutic agents to targeted intracellular sites in a controlled release manner. Nanomedicine and nanoparticulate drug delivery systems are rapidly developing as they play crucial roles in the development of therapeutic strategies for various types of cancer and malignancy. Nevertheless, high costs, associated toxicity and production of complexities are some of the critical barriers for their applications. Green nanomedicines have continually been improved as one of the viable approaches towards tumor drug delivery, thus making a notable impact on which considerably affect cancer treatment. In this regard, the utilization of natural and renewable feedstocks as a starting point for the fabrication of nanosystems can considerably contribute to the development of green nanomedicines. Nanostructures and biopolymers derived from natural and biorenewable resources such as proteins, lipids, lignin, hyaluronic acid, starch, cellulose, gum, pectin, alginate, and chitosan play vital roles in the development of cancer nanotherapy, imaging and management. This review uncovers recent investigations on diverse nanoarchitectures fabricated from natural and renewable feedstocks for the controlled/sustained and targeted drug/gene delivery systems against cancers including an outlook on some of the scientific challenges and opportunities in this field. Various important natural biopolymers and nanomaterials for cancer nanotherapy are covered and the scientific challenges and opportunities in this field are reviewed.

Multicomponent Polymerizations Involving Green Monomers

Green monomers, such as oxygen (O₂ ), water (H₂ O), and carbon dioxide (CO₂ ), refer to a kind of natural reagents with abundant, nontoxic, cheap, environmentally friendly, renewable, and sustainable features. These monomers have been used in multicomponent polymerizations (MCPs) toward functional polymers. In this review, the recent development of MCPs involving green monomers of O₂ -, H₂ O-, and CO₂ is summarized. The catalytic systems, polymerization conditions, the molecular weights, and potential applications of resultant polymers are briefly discussed. Furthermore, the existing challenges and the promising opportunities are concisely provided.

Total Synthesis of Phospholipomannan of Candida albicans

First, total synthesis of the cell surface phospholipomannan anchor [β-Manp-(1 → 2)-β-Manp]_n-(1 → 2)-β-Manp-(1 → 2)-α-Manp-1 → P-(O → 6)-α-Manp-(1 → 2)-Inositol-1-P-(O → 1)-phytoceramide of Candida albicans is reported. The target phospholipomannan (PLM) anchor poses synthetic challenges such as the unusual kinetically controlled (1 → 2)-β-oligomannan domain, anomeric phosphodiester, and unique phytoceramide lipid tail linked to the glycan through a phosphate group. The synthesis of PLM anchor was accomplished using a convergent block synthetic approach using three main appropriately protected building blocks: (1 → 2)-β-tetramannan repeats, pseudodisaccharide, and phytoceramide-1-H-phosphonate. The most challenging (1 → 2)-β-tetramannan domain was synthesized in one pot using the preactivation method. The phytoceramide-1-H-phosphonate was synthesized through an enantioselective A³ three-component coupling reaction. Finally, the phytoceramide-1-H-phosphonate moiety was coupled with pseudodisaccharide followed by deacetylation to produce the acceptor, which on subsequent coupling with tetramannosyl-H-phosphonate provided the fully protected PLM anchor. Final deprotection was successfully achieved by Pearlman's hydrogenation.

CuMoO4 Bimetallic Nanoparticles, An Efficient Catalyst for Room Temperature C-S Cross-Coupling of Thiols and Haloarenes

Cu^II catalyst is less efficient at room temperature for C-S cross-coupling. C-S cross-coupling by Cu^II catalyst at room temperature is not reported; however, doping of copper with molybdenum metal has been realized here to be more efficient for C-S cross-coupling in comparison to general Cu^II catalyst. The doped catalyst CuMoO₄ nanoparticle is found to be more efficient than copper. The catalyst works under mild conditions without any ligand at room temperature and is recyclable and effective for a wide range of thiols and haloarenes (ArI, ArBr, ArF) from milligram to gram scale. The copper-based bimetallic catalyst is developed and recognized for C-S cross-coupling of haloarenes with alkyl and aryl thiols.

Gold nanoparticles stabilized by PEG-tagged imidazolium salts as recyclable catalysts for the synthesis of propargylamines and the cycloisomerization of γ-alkynoic acids

Water-soluble gold nanoparticles prepared in the presence of PEG-tagged tris-imidazolium bromide, containing Au(0) and Au(i) species, are reusable catalysts.

Bimetallic BaMoO4 nanoparticles for the C–S cross-coupling of thiols with haloarenes

The C–S cross-coupling of alkyl/aryl thiols with haloarenes using BaMoO₄ nanoparticles was accomplished with high yields, and good functional group tolerance and selectivity. Unactivated bromo and 4-acetyl fluoroarenes can afford thioethers in high yields.

Recyclable bimetallic CuMoO4 nanoparticles for C–N cross-coupling reaction under mild conditions

New bimetallic CuMoO₄ nanocatalysts for C–N cross-coupling.

Immobilized Gold Nanoparticles Prepared from Gold(III)-Containing Ionic Liquids on Silica: Application to the Sustainable Synthesis of Propargylamines

A cycloaurated phosphinothioic amide gold(III) complex was supported on amorphous silica with the aid of an imidazolium ionic liquid (IL) physisorbed in the SiO₂ pores (SiO₂⁻IL) and covalently bonded to the SiO₂ (SiO₂@IL). Gold(0) nanoparticles (AuNPs) were formed in situ and subsequently immobilized on the SiO₂⁻IL/SiO₂@IL phase. The resulting catalytic systems Au⁻SiO₂⁻IL and Au⁻SiO₂@IL promoted the solvent-free A³ coupling reaction of alkynes, aldehydes, and amines in high yields under solvent-free conditions with very low catalyst loading and without the use of additives. The Au⁻SiO₂@IL catalyst showed good recyclability and could be reused at least five times with yields of propargylamines of ≥80%. This synthetic method provides a green and low cost way to effectively prepare propargylamines. Additionally, 31P high resolution magic angle spinning (HRMAS) NMR spectroscopy is introduced as a simple technique to establish the Au loading of the catalyst.