Hydrogen from Water is more than a Fuel: Hydrogenations and Hydrodeoxygenations for a Biobased Economy

Electrochemical hydrogenation and oxidation of organic species involving water

Fossil fuel-driven thermochemical hydrogenation and oxidation using high-pressure H2 and O2 are still popular but energy-intensive CO2-emitting processes. At present, developing renewable energy-powered electrochemical technologies, especially those using clean, safe and easy-to-handle reducing agents and oxidants for organic hydrogenation and oxidation reactions, is urgently needed. Water is an ideal carrier of hydrogen and oxygen. Electrochemistry provides a powerful route to drive water splitting under ambient conditions. Thus, electrochemical hydrogenation and oxidation transformations involving water as the hydrogen source and oxidant, respectively, have been developed to be mild and efficient tools to synthesize organic hydrogenated and oxidized products. In this Review, we highlight the advances in water-participating electrochemical hydrogenation and oxidation reactions of representative organic molecules. Typical electrode materials, performance metrics and key characterization techniques are firstly introduced. General electrocatalyst design principles and controlling the microenvironment for promoting hydrogenation and oxygenation reactions involving water are summarized. Furthermore, paired hydrogenation and oxidation reactions are briefly introduced before finally discussing the challenges and future opportunities of this research field.

Hetero-Coupling of Bio-Based Medium-Chain Carboxylic Acids by Kolbe Electrolysis Enables High Fuel Yield and Efficiency

Mixtures of n-carboxylic acids (n-CA) as derived from microbial conversion of waste biomass were converted to bio-fuel using Kolbe electrolysis. While providing full carbon and electron balances, key parameters like electrolysis time, chain length of n-CA, and pH were investigated for their influence on reaction efficiency. Electrolysis of n-hexanoic acid showed the highest coulombic efficiency (CE) of 58.9±16.4 % (n=4) for liquid fuel production among individually tested n-CA. Duration of the electrolysis was varied within a range of 0.27 to 1.02 faraday equivalents without loss of efficiency. Noteworthy, CE increased to around 70 % by hetero-coupling when electrolysing n-CA mixtures regardless of the applied pH. Thus, 1 L of fuel could be produced from 12.4 mol of n-CA mixture using 5.02 kWh (<1 € L^-1 ). Thus, a coupling with microbial processes producing n-CA mixtures from different organic substrates and waste is more than promising.

Platinized Titanium as Alternative Cost-Effective Anode for Efficient Kolbe Electrolysis in Aqueous Electrolyte Solutions

Five commercial materials were assessed for electrochemical conversion of n-hexanoic acid by Kolbe electrolysis. Platinized titanium performed best, achieving a coulombic efficiency (CE) of 93.1±6.7 % (n=6) for the degradation of n-hexanoic acid and 48.3±3.2 % (n=6) for the production of n-decane, which is close to the performance of pure platinum (89.7±14.4 and 55.5±3.5 %; n=6). 56.7 mL liquid fuel was produced per mole n-hexanoic acid, converting to an energy demand of 6.66 kWh and 1.22 € per L. Using optical profilometry and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy, it was shown that the degree of coverage of the titanium surface with platinum played the most important role. An uncovered surface of as little as 1-3 % already led to a deterioration of the CE of approximately 50 %. Using platinized titanium requires >36 times less capital expenditure at only <10 % increased operational expenditure; an electrode lifetime of 10000 h can be expected.