Optimization of protein models

Using Local Protein Model Quality Estimates to Guide a Molecular Dynamics-Based Refinement Strategy

The refinement of predicted 3D models aims to bring them closer to the native structure by fixing errors including unusual bonds and torsion angles and irregular hydrogen bonding patterns. Refinement approaches based on molecular dynamics (MD) simulations using different types of restraints have performed well since CASP10. ReFOLD, developed by the McGuffin group, was one of the many MD-based refinement approaches, which were tested in CASP 12. When the performance of the ReFOLD method in CASP12 was evaluated, it was observed that ReFOLD suffered from the absence of a reliable guidance mechanism to reach consistent improvement for the quality of predicted 3D models, particularly in the case of template-based modelling (TBM) targets. Therefore, here we propose to utilize the local quality assessment score produced by ModFOLD6 to guide the MD-based refinement approach to further increase the accuracy of the predicted 3D models. The relative performance of the new local quality assessment guided MD-based refinement protocol and the original MD-based protocol ReFOLD are compared utilizing many different official scoring methods. By using the per-residue accuracy (or local quality) score to guide the refinement process, we are able to prevent the refined models from undesired structural deviations, thereby leading to more consistent improvements. This chapter will include a detailed analysis of the performance of the local quality assessment guided MD-based protocol versus that deployed in the original ReFOLD method.

Computational reconstruction of atomistic protein structures from coarse-grained models

Three-dimensional protein structures, whether determined experimentally or theoretically, are often too low resolution. In this mini-review, we outline the computational methods for protein structure reconstruction from incomplete coarse-grained to all atomistic models. Typical reconstruction schemes can be divided into four major steps. Usually, the first step is reconstruction of the protein backbone chain starting from the C-alpha trace. This is followed by side-chains rebuilding based on protein backbone geometry. Subsequently, hydrogen atoms can be reconstructed. Finally, the resulting all-atom models may require structure optimization. Many methods are available to perform each of these tasks. We discuss the available tools and their potential applications in integrative modeling pipelines that can transfer coarse-grained information from computational predictions, or experiment, to all atomistic structures.

Applications of Molecular Dynamics Simulation in Structure Prediction of Peptides and Proteins

Compared with rapid accumulation of protein sequences from high-throughput DNA sequencing, obtaining experimental 3D structures of proteins is still much more difficult, making protein structure prediction (PSP) potentially very useful. Currently, a vast majority of PSP efforts are based on data mining of known sequences, structures and their relationships (informatics-based). However, if closely related template is not available, these methods are usually much less reliable than experiments. They may also be problematic in predicting the structures of naturally occurring or designed peptides. On the other hand, physics-based methods including molecular dynamics (MD) can utilize our understanding of detailed atomic interactions determining biomolecular structures. In this mini-review, we show that all-atom MD can predict structures of cyclic peptides and other peptide foldamers with accuracy similar to experiments. Then, some notable successes in reproducing experimental 3D structures of small proteins through MD simulations (some with replica-exchange) of the folding were summarized. We also describe advancements of MD-based refinement of structure models, and the integration of limited experimental or bioinformatics data into MD-based structure modeling.

Methods for the Refinement of Protein Structure 3D Models

The refinement of predicted 3D protein models is crucial in bringing them closer towards experimental accuracy for further computational studies. Refinement approaches can be divided into two main stages: The sampling and scoring stages. Sampling strategies, such as the popular Molecular Dynamics (MD)-based protocols, aim to generate improved 3D models. However, generating 3D models that are closer to the native structure than the initial model remains challenging, as structural deviations from the native basin can be encountered due to force-field inaccuracies. Therefore, different restraint strategies have been applied in order to avoid deviations away from the native structure. For example, the accurate prediction of local errors and/or contacts in the initial models can be used to guide restraints. MD-based protocols, using physics-based force fields and smart restraints, have made significant progress towards a more consistent refinement of 3D models. The scoring stage, including energy functions and Model Quality Assessment Programs (MQAPs) are also used to discriminate near-native conformations from non-native conformations. Nevertheless, there are often very small differences among generated 3D models in refinement pipelines, which makes model discrimination and selection problematic. For this reason, the identification of the most native-like conformations remains a major challenge.

Modeling of Disordered Protein Structures Using Monte Carlo Simulations and Knowledge-Based Statistical Force Fields

The description of protein disordered states is important for understanding protein folding mechanisms and their functions. In this short review, we briefly describe a simulation approach to modeling protein interactions, which involve disordered peptide partners or intrinsically disordered protein regions, and unfolded states of globular proteins. It is based on the CABS coarse-grained protein model that uses a Monte Carlo (MC) sampling scheme and a knowledge-based statistical force field. We review several case studies showing that description of protein disordered states resulting from CABS simulations is consistent with experimental data. The case studies comprise investigations of protein⁻peptide binding and protein folding processes. The CABS model has been recently made available as the simulation engine of multiscale modeling tools enabling studies of protein⁻peptide docking and protein flexibility. Those tools offer customization of the modeling process, driving the conformational search using distance restraints, reconstruction of selected models to all-atom resolution, and simulation of large protein systems in a reasonable computational time. Therefore, CABS can be combined in integrative modeling pipelines incorporating experimental data and other modeling tools of various resolution.

Computational characterization and molecular dynamics simulation of the thermostable direct hemolysin-related hemolysin (TRH) amplified from Vibrio parahaemolyticus

Vibrio parahaemolyticus is a major seafood-borne pathogen that causes life-threatening gastroenteric diseases in humans through the consumption of contaminated seafoods. V. parahaemolyticus produces different kinds of toxins, including thermostable direct hemolysin (TDH), TDH-related hemolysin (TRH), and some effector proteins belonging to the Type 3 Secretion System, out of which TDH and TRH are considered to be the major factors for virulence. Although TRH is one of the major virulent proteins, there is a dearth of understanding about the structural and functional properties of this protein. This study therefore aimed to amplify the full length trh gene from V. parahaemolyticus and perform sequence-based analyses, followed by structural and functional analyses of the TRH protein using different bioinformatics tools. The TRH protein shares significant conservedness with the TDH protein. A multiple sequence alignment of TRH proteins from Vibrio and non-Vibrio species revealed that the TRH protein is highly conserved throughout evolution. The three dimensional (3D) structure of the TRH protein was constructed by comparative modelling and the quality of the predicted model was verified. Molecular dynamics simulations were performed to understand the dynamics, residual fluctuations, and the compactness of the protein. The structure of TRH was found to contain 19 pockets, of which one (pocket ID: 2) was predicted to be important from the view of drug design. Eleven residues (E138, Y140, C151, F158, C161, K162, S163, and Q164), which are reported to actively participate in the formation of the tetrameric structure, were present in this pocket. This study extends our understanding of the structural and functional dynamics of the TRH protein and as well as provides new insights for the treatment and prevention of V. parahaemolyticus infections.

Loop modelling 1.0

Engineering surface loops is a sub-topic of protein engineering that is used routinely in many research fields in academia and industry alike. We provide some tools that search in the PDB for loops satisfying a wide variety of constraints. We illustrate the usefulness of these tools by applying them to a series of recently published studies that included loop engineering or loop modelling. LoopFinder finds loops that fit between two anchor stretches of typically 2, 3, or 4 amino acids each. ProDA find loops of a given length with predefined secondary structure, residue types, hydrophobicity, etc. WHAT IF has gotten a series of new options to scan the whole PDB for loops combining the LoopFinder and ProDA techniques. The open nature of these tools will allow bioinformaticians in this field to easily design their own loop modelling software around our tools.

AVAILABILITY AND IMPLEMENTATION

LoopFinder is a stand-alone Fortran program that is likely to compile and run on every computer. The LoopFinder source code, data files, and documentation are freely available from swift.cmbi.ru.nl/gv/loops/. ProDA is free to all users. There is no login requirement. It is available at: http://bioinf.modares.ac.ir/software/linda/. WHAT IF is shareware that is available from https://swift.cmbi.ru.nl/whatif/.

Sphinx: merging knowledge-based and ab initio approaches to improve protein loop prediction

Motivation

Loops are often vital for protein function, however, their irregular structures make them difficult to model accurately. Current loop modelling algorithms can mostly be divided into two categories: knowledge-based, where databases of fragments are searched to find suitable conformations and ab initio, where conformations are generated computationally. Existing knowledge-based methods only use fragments that are the same length as the target, even though loops of slightly different lengths may adopt similar conformations. Here, we present a novel method, Sphinx, which combines ab initio techniques with the potential extra structural information contained within loops of a different length to improve structure prediction.

Results

We show that Sphinx is able to generate high-accuracy predictions and decoy sets enriched with near-native loop conformations, performing better than the ab initio algorithm on which it is based. In addition, it is able to provide predictions for every target, unlike some knowledge-based methods. Sphinx can be used successfully for the difficult problem of antibody H3 prediction, outperforming RosettaAntibody, one of the leading H3-specific ab initio methods, both in accuracy and speed.

Availability and Implementation

Sphinx is available at http://opig.stats.ox.ac.uk/webapps/sphinx.

Supplementary information

Supplementary data are available at Bioinformatics online.

Computational protein structure refinement: Almost there, yet still so far to go

Protein structures are essential in modern biology yet experimental methods are far from being able to catch up with the rapid increase in available genomic data. Computational protein structure prediction methods aim to fill the gap while the role of protein structure refinement is to take approximate initial template-based models and bring them closer to the true native structure. Current methods for computational structure refinement rely on molecular dynamics simulations, related sampling methods, or iterative structure optimization protocols. The best methods are able to achieve moderate degrees of refinement but consistent refinement that can reach near-experimental accuracy remains elusive. Key issues revolve around the accuracy of the energy function, the inability to reliably rank multiple models, and the use of restraints that keep sampling close to the native state but also limit the degree of possible refinement. A different aspect is the question of what exactly the target of high-resolution refinement should be as experimental structures are affected by experimental conditions and different biological questions require varying levels of accuracy. While improvement of the global protein structure is a difficult problem, high-resolution refinement methods that improves local structural quality such as favorable stereochemistry and the avoidance of atomic clashes are much more successful.

One-Dimensional Structural Properties of Proteins in the Coarse-Grained CABS Model

Despite the significant increase in computational power, molecular modeling of protein structure using classical all-atom approaches remains inefficient, at least for most of the protein targets in the focus of biomedical research. Perhaps the most successful strategy to overcome the inefficiency problem is multiscale modeling to merge all-atom and coarse-grained models. This chapter describes a well-established CABS coarse-grained protein model. The CABS (C-Alpha, C-Beta, and Side chains) model assumes a 2-4 united-atom representation of amino acids, knowledge-based force field (derived from the statistical regularities seen in known protein sequences and structures) and efficient Monte Carlo sampling schemes (MC dynamics, MC replica-exchange, and combinations). A particular emphasis is given to the unique design of the CABS force-field, which is largely defined using one-dimensional structural properties of proteins, including protein secondary structure. This chapter also presents CABS-based modeling methods, including multiscale tools for de novo structure prediction, modeling of protein dynamics and prediction of protein-peptide complexes. CABS-based tools are freely available at http://biocomp.chem.uw.edu.pl/tools.

Coarse-Grained Simulations of Membrane Insertion and Folding of Small Helical Proteins Using the CABS Model

The CABS coarse-grained model is a well-established tool for modeling globular proteins (predicting their structure, dynamics, and interactions). Here we introduce an extension of the CABS representation and force field (CABS-membrane) to the modeling of the effect of the biological membrane environment on the structure of membrane proteins. We validate the CABS-membrane model in folding simulations of 10 short helical membrane proteins not using any knowledge about their structure. The simulations start from random protein conformations placed outside the membrane environment and allow for full flexibility of the modeled proteins during their spontaneous insertion into the membrane. In the resulting trajectories, we have found models close to the experimental membrane structures. We also attempted to select the correctly folded models using simple filtering followed by structural clustering combined with reconstruction to the all-atom representation and all-atom scoring. The CABS-membrane model is a promising approach for further development toward modeling of large protein-membrane systems.

Effective protein model structure refinement by loop modeling and overall relaxation

Protein structures predicted by state-of-the-art template-based methods may still have errors when the template proteins are not similar enough to the target protein. Overall target structure may deviate from the template structures owing to differences in sequences. Structural information for some local regions such as loops may not be available when there are sequence insertions or deletions. Those structural aspects that originate from deviations from templates can be dealt with by ab initio structure refinement methods to further improve model accuracy. In the CASP11 refinement experiment, we tested three different refinement methods that utilize overall structure relaxation, loop modeling, and quality assessment of multiple initial structures. From this experiment, we conclude that the overall relaxation method can consistently improve model quality. Loop modeling is the most useful when the initial model structure is high quality, with GDT-HA >60. The method that used multiple initial structures further refined the already refined models; the minor improvements with this method raise the issue of problem with the current energy function. Future research directions are also discussed. Proteins 2016; 84(Suppl 1):293-301. © 2015 Wiley Periodicals, Inc.

Modeling of protein-peptide interactions using the CABS-dock web server for binding site search and flexible docking

Protein-peptide interactions play essential functional roles in living organisms and their structural characterization is a hot subject of current experimental and theoretical research. Computational modeling of the structure of protein-peptide interactions is usually divided into two stages: prediction of the binding site at a protein receptor surface, and then docking (and modeling) the peptide structure into the known binding site. This paper presents a comprehensive CABS-dock method for the simultaneous search of binding sites and flexible protein-peptide docking, available as a user's friendly web server. We present example CABS-dock results obtained in the default CABS-dock mode and using its advanced options that enable the user to increase the range of flexibility for chosen receptor fragments or to exclude user-selected binding modes from docking search. Furthermore, we demonstrate a strategy to improve CABS-dock performance by assessing the quality of models with classical molecular dynamics. Finally, we discuss the promising extensions and applications of the CABS-dock method and provide a tutorial appendix for the convenient analysis and visualization of CABS-dock results. The CABS-dock web server is freely available at http://biocomp.chem.uw.edu.pl/CABSdock/.

Significant Refinement of Protein Structure Models Using a Residue-Specific Force Field

An important application of all-atom explicit-solvent molecular dynamics (MD) simulations is the refinement of protein structures from low-resolution experiments or template-based modeling. A critical requirement is that the native structure is stable with the force field. We have applied a recently developed residue-specific force field, RSFF1, to a set of 30 refinement targets from recent CASP experiments. Starting from their experimental structures, 1.0 μs unrestrained simulations at 298 K retain most of the native structures quite well except for a few flexible terminals and long internal loops. Starting from each homology model, a 150 ns MD simulation at 380 K generates the best RMSD improvement of 0.85 Å on average. The structural improvements roughly correlate with the RMSD of the initial homology models, indicating possible consistent structure refinement. Finally, targets TR614 and TR624 have been subjected to long-time replica-exchange MD simulations. Significant structural improvements are generated, with RMSD of 1.91 and 1.36 Å with respect to their crystal structures. Thus, it is possible to achieve realistic refinement of protein structure models to near-experimental accuracy, using accurate force field with sufficient conformational sampling.

CABS-flex predictions of protein flexibility compared with NMR ensembles

Motivation: Identification of flexible regions of protein structures is important for understanding of their biological functions. Recently, we have developed a fast approach for predicting protein structure fluctuations from a single protein model: the CABS-flex. CABS-flex was shown to be an efficient alternative to conventional all-atom molecular dynamics (MD). In this work, we evaluate CABS-flex and MD predictions by comparison with protein structural variations within NMR ensembles.

Results: Based on a benchmark set of 140 proteins, we show that the relative fluctuations of protein residues obtained from CABS-flex are well correlated to those of NMR ensembles. On average, this correlation is stronger than that between MD and NMR ensembles. In conclusion, CABS-flex is useful and complementary to MD in predicting protein regions that undergo conformational changes as well as the extent of such changes.

Availability and implementation: The CABS-flex is freely available to all users at http://biocomp.chem.uw.edu.pl/CABSflex.

Contact: sekmi@chem.uw.edu.pl

Supplementary information:Supplementary data are available at Bioinformatics online.

CABS-fold: Server for the de novo and consensus-based prediction of protein structure

The CABS-fold web server provides tools for protein structure prediction from sequence only (de novo modeling) and also using alternative templates (consensus modeling). The web server is based on the CABS modeling procedures ranked in previous Critical Assessment of techniques for protein Structure Prediction competitions as one of the leading approaches for de novo and template-based modeling. Except for template data, fragmentary distance restraints can also be incorporated into the modeling process. The web server output is a coarse-grained trajectory of generated conformations, its Jmol representation and predicted models in all-atom resolution (together with accompanying analysis). CABS-fold can be freely accessed at http://biocomp.chem.uw.edu.pl/CABSfold.

Combining coarse-grained protein models with replica-exchange all-atom molecular dynamics

We describe a combination of all-atom simulations with CABS, a well-established coarse-grained protein modeling tool, into a single multiscale protocol. The simulation method has been tested on the C-terminal beta hairpin of protein G, a model system of protein folding. After reconstructing atomistic details, conformations derived from the CABS simulation were subjected to replica-exchange molecular dynamics simulations with OPLS-AA and AMBER99sb force fields in explicit solvent. Such a combination accelerates system convergence several times in comparison with all-atom simulations starting from the extended chain conformation, demonstrated by the analysis of melting curves, the number of native-like conformations as a function of time and secondary structure propagation. The results strongly suggest that the proposed multiscale method could be an efficient and accurate tool for high-resolution studies of protein folding dynamics in larger systems.