Mechanical properties of the collagen network in human articular cartilage as measured by osmotic stress technique

Mechanically Robust Lubricating Hydrogels Beyond the Natural Cartilage as Compliant Artificial Joint Coating

Natural cartilage exhibits superior lubricity as well as an ultra-long service lifetime, which is related to its surface hydration, load-bearing, and deformation recovery feature. Until now, it is of great challenge to develop reliable cartilage lubricating materials or coatings with persistent robustness. Inspired by the unique biochemical structure and mechanics of natural cartilage, the study reports a novel cartilage-hydrogel composed of top composite lubrication layer and bottom mechanical load-bearing layer, by covalently manufacturing thick polyelectrolyte brush phase through sub-surface of tough hydrogel matrix with multi-level crystallization phase. Due to multiple network dissipation mechanisms of matrix, this hydrogel can achieve a high compression modulus of 11.8 MPa, a reversible creep recovery (creep strain: ≈2%), along with excellent anti-swelling feature in physiological medium (v/v0 < 5%). Using low-viscosity PBS as lubricant, this hydrogel demonstrates persistent lubricity (average COF: ≈0.027) under a high contact pressure of 2.06 MPa with encountering 100k reciprocating sliding cycles, negligible wear and a deformation recovery of collapse pit in testing area. The extraordinary lubrication performance of this hydrogel is comparable to but beyond the natural animal cartilage, and can be used as compliant coating for implantable articular material of UHMWPE to present, offering more robust lubricity than current commercial system.

Osmolarity-Induced Altered Intracellular Molecular Crowding Drives Osteoarthritis Pathology

Osteoarthritis (OA) is a multifactorial degenerative joint disease of which the underlying mechanisms are yet to be fully understood. At the molecular level, multiple factors including altered signaling pathways, epigenetics, metabolic imbalance, extracellular matrix degradation, production of matrix metalloproteinases, and inflammatory cytokines, are known to play a detrimental role in OA. However, these factors do not initiate OA, but are mediators or consequences of the disease, while many other factors causing the etiology of OA are still unknown. Here, it is revealed that microenvironmental osmolarity can induce and reverse osteoarthritis-related behavior of chondrocytes via altered intracellular molecular crowding, which represents a previously unknown mechanism underlying OA pathophysiology. Decreased intracellular crowding is associated with increased sensitivity to proinflammatory triggers and decreased responsiveness to anabolic stimuli. OA-induced lowered intracellular molecular crowding could be renormalized via exposure to higher extracellular osmolarity such as those found in healthy joints, which reverse OA chondrocyte's sensitivity to catabolic stimuli as well as its glycolytic metabolism.

Is seborrheic dermatitis associated with early-stage osteoarthritis?

Seborrheic dermatitis (SD) and osteoarthritis involve similar factors in their pathogenesis. Both of these diseases are associated with an increased frequency of metabolic syndrome and underlying systemic inflammation. This study evaluated the thickness of the distal femoral cartilage using ultrasonography in patients with SD. The study enrolled 60 patients with SD (19 females and 41 males, mean age: 34.07 ± 12.56 years) and 60 controls matched for age and sex (20 females and 40 males, mean age: 35.08 ± 12.78 years). Ultrasonography was used to measure the distal femoral cartilage thickness (FCT) of the right medial condyle, right lateral condyle, right intercondylar area, left medial condyle, left lateral condyle, and left intercondylar area. FCT values at all points were significantly higher in patients with SD than in the controls (P < .05). Further, all FCT values were significantly higher in patients with moderate SD than in those with mild SD (P < .001). A strong positive correlation was observed between disease severity and FCT measured at right medial condyle (r = .7, P < .001), right lateral condyle (r = .749, P < .001), right intercondylar area (r = .79, P < .001), left medial condyle (r = .624, P < .001), and left intercondylar area (r = .703, P < .001). Further, a moderately positive correlation was observed between disease severity and FCT measured at left lateral condyle (r = .581, P < .001). Increased FCT in patients with SD might be an early indicator of osteoarthritis. However, further studies, especially those evaluating older patients with SD, are required to support our findings.

Structure, composition and anisotropic swelling of the bovine acetabular labrum

The fibro-cartilaginous labrum surrounds the acetabular rim and is important for hip joint stability and sealing. Sealing may be enhanced by swelling pressure within the normal labrum. Swelling of the degenerated or torn labrum might occur and potentially contribute to the development of osteoarthritis, through altered load transmission. This study aimed to characterize the three-dimensional swelling behaviour, the collagen fiber orientation and spatial proteoglycan distribution of the bovine acetabular labrum. Specimens were harvested from bovine donors (192-652 days, male, n = 6 donors). Structure was analyzed by scanning electron microscopy, histology, and dimethylmethylene blue assay. Specimen dimensions were measured before and after incubation in phosphate buffered saline to assess the swelling. Results showed that the articulating surface is composed of a collagen mesh network. Collagen fiber bundles showed a low degree of alignment close to the surface and were circumferentially aligned in the deep tissue. Proteoglycans were identified clustered between the collagen bundles. Glycosaminoglycan content was 10 x lower than that of cartilage (23.1 ± 6.4 compared to 299.5 ± 19.1 μg/mg dry weight) with minor regional differences. Specimens swelled significantly more in the orthogonal direction (swelling ratio 124.7 ± 10.2%) compared to the swelling parallel to the articulating surface (108.8 ± 6.1% and 102.8 ± 4.1%). In the deep tissue, swelling was also restricted in the main collagen fiber bundle direction (circumferentially), with a swelling ratio of 109.5 ± 4.0% in the main fiber bundle direction compared to 126.8 ± 7.3 % and 122.3 ± 5.8% radially. The findings demonstrate that the labrum shows anisotropic swelling properties, which reflect the anisotropy in the tissue structure and inter-fiber localisation of proteoglycans.

Microscale investigation of the anisotropic swelling of cartilage tissue and cells in response to hypo-osmotic challenges

Tissue swelling represents an early sign of osteoarthritis, reflecting osmolarity changes from iso- to hypo-osmotic in the diseased joints. Increased tissue hydration may drive cell swelling. The opposing cartilages in a joint may swell differently, thereby predisposing the more swollen cartilage and cells to mechanical injuries. However, our understanding of the tissue-cell interdependence in osmotically loaded joints is limited as tissue and cell swellings have been studied separately. Here, we measured tissue and cell responses of opposing patellar (PAT) and femoral groove (FG) cartilages in lapine knees exposed to an extreme hypo-osmotic challenge. We found that the tissue matrix and most cells swelled during the hypo-osmotic challenge, but to a different extent (tissue: <3%, cells: 11%-15%). Swelling-induced tissue strains were anisotropic, showing 2%-4% stretch and 1%-2% compression along the first and third principal directions, respectively. These strains were amplified by 5-8 times in the cells. Interestingly, the first principal strains of tissue and cells occurred in different directions (60-61° for tissue vs. 8-13° for cells), suggesting different mechanisms causing volume expansion in the tissue and the cells. Instead of the continuous swelling observed in the tissue matrix, >88% of cells underwent regulatory volume decrease to return to their pre-osmotic challenge volumes. Cell shapes changed in the early phase of swelling but stayed constant thereafter. Kinematic changes to tissue and cells were larger for PAT cartilage than for FG cartilage. We conclude that the swelling-induced deformation of tissue and cells is anisotropic. Cells actively restored volume independent of the surrounding tissues and seemed to prioritize volume restoration over shape restoration. Our findings shed light on tissue-cell interdependence in changing osmotic environments that is crucial for cell mechano-transduction in swollen/diseased tissues.

Depth-Dependent Strain Model (1D) for Anisotropic Fibrils in Articular Cartilage

The mechanical response of articular cartilage (AC) under compression is anisotropic and depth-dependent. AC is osmotically active, and its intrinsic osmotic swelling pressure is balanced by its collagen fibril network. This mechanism requires the collagen fibers to be under a state of tensile pre-strain. A simple mathematical model is used to explain the depth-dependent strain calculations observed in articular cartilage under 1D axial compression (perpendicular to the articular surface). The collagen fibers are under pre-strain, influenced by proteoglycan concentration (fixed charged density, FCD) and collagen stiffness against swelling stress. The stiffness is introduced in our model as an anisotropic modulus that varies with fibril orientation through tissue depth. The collagen fibers are stiffer to stretching parallel to their length than perpendicular to it; when combined with depth-varying FCD, the model successfully predicts how tissue strains decrease with depth during compression. In summary, this model highlights that the mechanical properties of cartilage depend not only on proteoglycan concentration but also on the intrinsic properties of the pre-strained collagen network. These properties are essential for the proper functioning of articular cartilage.

Optics-Free, In Situ Swelling Monitoring of Articular Cartilage with Graphene Strain Sensors

Articular cartilage derives its load-bearing strength from the mechanical and physiochemical coupling between the collagen network and negatively charged proteoglycans, respectively. Current disease modeling approaches and treatment strategies primarily focus on cartilage stiffness, partly because indentation tests are readily accessible. However, stiffness measurements via indentation alone cannot discriminate between proteoglycan degradation versus collagen degradation, and there is a lack of methods to monitor physiochemical contributors in full-stack tissue. To decouple these contributions, here, we developed a platform that measures tissue swelling in full-depth equine cartilage explants using piezoresistive graphene strain sensors. These piezoresistive strain sensors are embedded within an elastomer bulk and have sufficient sensitivity to resolve minute, real-time changes in swelling. By relying on simple DC resistance measurements over optical techniques, our platform can analyze multiple samples in parallel. Using these devices, we found that cartilage explants under enzymatic digestion showed distinctive swelling responses to a hypotonic challenge and established average equilibrium swelling strains in healthy cartilage (4.6%), cartilage with proteoglycan loss (0.5%), and in cartilage with both collagen and proteoglycan loss (-2.6%). Combined with histology, we decoupled the pathologic swelling responses as originating either from reduced fixed charge density or from loss of intrinsic stiffness of the collagen matrix in the superficial zone. By providing scalable and in situ monitoring of cartilage swelling, our platform could facilitate regenerative medicine approaches aimed at restoring osmotic function in osteoarthritic cartilage or could be used to validate physiologically relevant swelling behavior in synthetic hydrogels.

Mechanochemistry of collagen

The collagen molecular family is the result of nearly one billion years of evolution. It is a unique family of proteins, the majority of which provide general mechanical support to biological tissues. Fibril forming collagens are the most abundant collagens in vertebrate animals and are generally found in positions that resist tensile loading. In animals, cells produce fibril-forming collagen molecules that self-assemble into larger structures known as collagen fibrils. Collagen fibrils are the fundamental, continuous, load-bearing elements in connective tissues, but are often further aggregated into larger load-bearing structures, fascicles in tendon, lamellae in cornea and in intervertebral disk. We know that failure to form fibrillar collagen is embryonic lethal, and excessive collagen formation/growth (fibrosis) or uncontrolled enzymatic remodeling (type II collagen: osteoarthritis) is pathological. Collagen is thus critical to vertebrate viability and instrumental in maintaining efficient mechanical structures. However, despite decades of research, our understanding of collagen matrix formation is not complete, and we know still less about the detailed mechanisms that drive collagen remodeling, growth, and pathology. In this perspective, we examine the known role of mechanical force on the formation and development of collagenous structure. We then discuss a mechanochemical mechanism that has the potential to unify our understanding of collagenous tissue assembly dynamics, which preferentially deposits and grows collagen fibrils directly in the path of mechanical force, where the energetics should be dissuasive and where collagen fibrils are most required. We term this mechanism: Mechanochemical force-structure causality. STATEMENT OF SIGNIFICANCE: Our mechanochemical-force structure causality postulate suggests that collagen molecules are components of mechanochemically-sensitive and dynamically-responsive fibrils. Collagen molecules assemble preferentially in the path of applied strain, can be grown in place by mechanical extension, and are retained in the path of force through strain-stabilization. The mechanisms that drive this behavior operate at the level of the molecules themselves and are encoded into the structure of the biomaterial. The concept might change our understanding of structure formation, enhance our ability to treat injuries, and accelerate the development of therapeutics to prevent pathologies such as fibrosis. We suggest that collagen is a mechanochemically responsive dynamic element designed to provide a substantial "material assist" in the construction of adaptive carriers of mechanical signals.

Computational Modelling for Managing Pathways to Cartilage Failure

Over several decades the perception and therefore description of articular cartilage changed substantially. It has transitioned from being described as a relatively inert tissue with limited repair capacity, to a tissue undergoing continuous maintenance and even adaption, through a range of complex regulatory processes. Even from the narrower lens of biomechanics, the engagement with articular cartilage has changed from it being an interesting, slippery material found in the hostile mechanical environment between opposing long bones, to an intriguing example of mechanobiology in action. The progress revealing this complexity, where physics, chemistry, material science and biology are merging, has been described with increasingly sophisticated computational models. Here we describe how these computational models of cartilage as an integrated system can be combined with the approach of structural reliability analysis. That is, causal, deterministic models placed in the framework of the probabilistic approach of structural reliability analysis could be used to understand, predict, and mitigate the risk of cartilage failure or pathology. At the heart of this approach is seeing cartilage overuse and disease processes as a 'material failure', resulting in failure to perform its function, which is largely mechanical. One can then describe pathways to failure, for example, how homeostatic repair processes can be overwhelmed leading to a compromised tissue. To illustrate this 'pathways to failure' approach, we use the interplay between cartilage consolidation and lubrication to analyse the increase in expected wear rates associated with cartilage defects or meniscectomy.

The intrinsic quality of proteoglycans, but not collagen fibres, degrades in osteoarthritic cartilage

The function of articular cartilage as a load-bearing connective tissue is derived primarily from a balanced interaction between the swelling proteoglycan (PG) matrix and tension-resistant collagen fibrous network. Such balance is compromised during joint disease such as osteoarthritis (OA) due to degradation to PGs and/or collagens. While the PG degradation is generally thought to be related to a loss of protein abundance, the collagenous degradation is more complex as it can be caused independently by a decrease of collagen content, disorganisation of fibrous structure and softening of individual collagen fibrils. A comprehensive understanding of the initial trajectories of degradation of PGs and collagen network can improve our chance of finding potential therapeutic solutions for OA. Here, we developed geometrically, structurally, and compositionally realistic and sample-specific Finite Element (FE) models under the framework of multiphasic mixture theory, from which the elastic moduli of collagen fibres and the PG load-bearing quality in healthy and diseased cartilages were estimated by numerical optimisation of the multi-step indentation stress relaxation force-time curves. We found the intrinsic quality of collagen fibres, measured by their elastic moduli, to stay constant for healthy and diseased cartilages. Combining with previous findings which show unaltered collagen content during early stages of OA, our results suggest the disorganisation of collagen fibrous network as the first form of collagenous degradation in osteoarthritic cartilage. We also found that PG degradation involves not only a loss of protein abundance, but also the quality of the remaining PGs in generating sufficient osmotic pressure for load bearing. This study sheds light on the mechanism of OA pathogenesis and highlights the restoration of collageneous organisation in cartilage as key medical intervention for OA. STATEMENT OF SIGNIFICANCE: Collagen network in articular cartilage consists of individual fibres that are organised into depth-dependent structure specialised for joint load-bearing and lubrication. During osteoarthritis, the collagen network undergoes mechanical degradation, but it is unclear if a loss of content, disorganisation of fibrous structure, or softening of individual fibres causes this degeneration. Using mechanical indentation, Finite Element modelling, and numerical optimisation methods, we determined that individual fibres did not soften in early disease stage. Together with previous findings showing unaltered collagen content, our results pinpoint the disorganisation of collagen structure as the main culprit for early collagenous degradation in osteoarthritic cartilage. Thus, early restoration in cartilage of collagen organisation, instead of individual fibre quality, may be key to slow osteoarthritis development.

Hydrogel composite mimics biological tissues

A novel composite hydrogel was developed that shows remarkable similarities to load bearing biological tissues. The composite gel consisting of a poly(vinyl alcohol (PVA) matrix filled with poly(acrylic acid) (PAA) microgel particles exhibits osmotic and mechanical properties that are qualitatively different from regular gels. In the PVA/PAA system the swollen PAA particles "inflate" the PVA network. The swelling of the PAA is limited by the tensile stress P_el developing in the PVA matrix. P_el increases with increasing swelling degree, which is opposite to the decrease of the elastic pressure observed in regular gels. The maximum tensile stress Pmaxel can be identified as a quantity that defines the load bearing ability of the composite gel. Systematic osmotic swelling pressure measurements have been made on PVA/PAA gels to determine the effects of PVA stiffness, PAA crosslink density, and Ca²⁺ ion concentration on Pmaxel. It is found that Pmaxel increases with the stiffness of the PVA matrix, and decreases with (i) increasing crosslink density of the PAA and (ii) increasing Ca²⁺ ion concentration. Small angle neutron scattering (SANS) measurements indicate only a weak interaction between the PVA and PAA gels. It is demonstrated that the osmotic swelling pressure of PVA/PAA composite gels reproduces the osmotic behavior of healthy and osteoarthritic cartilage.

Structural origins of cartilage shear mechanics

Articular cartilage is a remarkable material able to sustain millions of loading cycles over decades of use outperforming any synthetic substitute. Crucially, how extracellular matrix constituents alter mechanical performance, particularly in shear, remains poorly understood. Here, we present experiments and theory in support of a rigidity percolation framework that quantitatively describes the structural origins of cartilage's shear properties and how they arise from the mechanical interdependence of the collagen and aggrecan networks making up its extracellular matrix. This framework explains that near the cartilage surface, where the collagen network is sparse and close to the rigidity threshold, slight changes in either collagen or aggrecan concentrations, common in early stages of cartilage disease, create a marked weakening in modulus that can lead to tissue collapse. More broadly, this framework provides a map for understanding how changes in composition throughout the tissue alter its shear properties and ultimate in vivo function.

The ultrastructure of cartilage tissue and its swelling response in relation to matrix health

This multi-length scale anatomical study explores the influence of mild cartilage structural degeneration on the tissue swelling response. While the swelling response of cartilage has been studied extensively, this is the first study to reveal and correlate tissue microstructure and ultrastructure, with the swelling induced cartilage tissue strains. Cartilage sample strips (n = 30) were obtained from the distal-lateral quadrant of thirty mildly degenerate bovine patellae and, following excision from the bone, the cartilage strips were allowed to swell freely for 2 h in solutions of physiological saline and distilled water successively. The swelling response of this group of samples were compared with that of healthy cartilage, with (n = 20) and without the surface layer (n = 20). The subsequent curling response of cartilage showed that in healthy tissue it was highly variable, and with the surface removed some samples curved in the opposite direction, while in the mildly degenerate tissue group, virtually all tissue strips curved in a consistent upward manner. A significant difference in strain was observed between healthy samples with surface layer removed and mildly degenerate samples, illustrating how excision of the surface zone from pristine cartilage is insufficient to model the swelling response of tissue which has undergone natural degenerative changes. On average, total tissue thickness increased from 940 µm (healthy) to 1079 µm (mildly degenerate), however, looking at the zonal strata, surface and transition zone thicknesses both decreased while deep zone thickness increased from healthy to mildly degenerate tissue. Morphologically, changes to the surface zone integrity were correlated with a diminished surface layer which, at the ultrastructural scale, correlated with a decreased fibrillar density. Similarly, fibrosity of the general matrix visible at the microscale was associated with a loss of later interconnectivity resulting in large, aggregated fibril bundles. The microstructural and ultrastructural investigation revealed that the key differences influencing the tissue swelling strain response was (1) the thickness and extent of disruption to the surface layer and (2) the amount of fibrillar network destructuring, highlighting the importance of the collagen and tissue matrix structure in restraining cartilage swelling.

Reversible changes in the 3D collagen fibril architecture during cyclic loading of healthy and degraded cartilage

Biomechanical changes to the collagen fibrillar architecture in articular cartilage are believed to play a crucial role in enabling normal joint function. However, experimentally there is little quantitative knowledge about the structural response of the Type II collagen fibrils in cartilage to cyclic loading in situ, and the mechanisms that drive the ability of cartilage to withstand long-term repetitive loading. Here we utilize synchrotron small-angle X-ray scattering (SAXS) combined with in-situ cyclic loading of bovine articular cartilage explants to measure the fibrillar response in deep zone articular cartilage, in terms of orientation, fibrillar strain and inter-fibrillar variability in healthy cartilage and cartilage degraded by exposure to the pro-inflammatory cytokine IL-1β. We demonstrate that under repeated cyclic loading the fibrils reversibly change the width of the fibrillar orientation distribution whilst maintaining a largely consistent average direction of orientation. Specifically, the effect on the fibrillar network is a 3-dimensional conical orientation broadening around the normal to the joint surface, inferred by 3D reconstruction of X-ray scattering peak intensity distributions from the 2D pattern. Further, at the intrafibrillar level, this effect is coupled with reversible reduction in fibrillar pre-strain under compression, alongside increase in the variability of fibrillar pre-strain. In IL-1β degraded cartilage, the collagen rearrangement under cyclic loading is disrupted and associated with reduced tissue stiffness. These finding have implications as to how changes in local collagen nanomechanics might drive disease progression or vice versa in conditions such as osteoarthritis and provides a pathway to a mechanistic understanding of such diseases.

Statement of significance

Structural deterioration in biomechanically loaded musculoskeletal organs, e.g., joint osteoarthritis and back pain, are linked to breakdown and changes in their collagen-rich cartilaginous tissue matrix. A critical component enabling cartilage biomechanics is the ultrastructural collagen fibrillar network in cartilage. However, experimental probes of the dynamic structural response of cartilage collagen to biomechanical loads are limited. Here, we use X-ray scattering during cyclic loading (as during walking) on joint tissue to show that cartilage fibrils resist loading by a reversible, three-dimensional orientation broadening and disordering mechanism at the molecular level, and that inflammation reduces this functionality. Our results will help understand how changes to small-scale tissue mechanisms are linked to ageing and osteoarthritic progression, and development of biomaterials for joint replacements.

The swelling behavior of the mouse cervix: Changing kinetics with osmolarity and the role of hyaluronan in pregnancy

The cervical remodeling process during pregnancy is characterized by progressive compositional and structural changes in the tissues extra-cellular matrix (ECM). Appropriately timed remodeling is critical for healthy gestation and prevention of premature cervical softening leading to preterm birth (PTB). Modification of the ECM glycosaminoglycans (GAGs) content with advancing pregnancy, especially the non-sulfated GAG hyaluronan (HA), is a fundamental change associated with cervical remodeling. While GAGs have numerous physiological roles, the mechanical consequence of evolving GAG content on cervical structure-function behavior remains an open question. Additionally, an understanding of cervical swelling properties, postulated to be regulated in part by GAGs, is required for the appropriate definition of a reference configuration for mechanical tests and to enhance biological understanding. To investigate cervical swelling, osmotic loading tests are conducted on isolated wild type mouse cervices throughout pregnancy. These tests are performed in various osmolarity solutions to assess the influence of the media on swelling kinetics. A genetically altered strain of mice with depletion of cervical HA is also tested to elucidate the contribution of HA to tissue swelling. Results show ex vivo cervical swelling is significant with volume changes ranging from 20 to 100% after 3h of free swelling. The swelling kinetics depend highly on osmolarity of the media and is altered with advancing pregnancy. The contribution of HA to swelling is only significant in hypo-osmotic solution when HA cervical content is high at the end of pregnancy. In summary, it is critical to account for swelling deformation mechanisms after excision in mechanical experiments. STATEMENT OF SIGNIFICANCE: The cervical extracellular matrix (ECM) undergoes drastic changes to fulfill the functional change of the cervix during pregnancy. Inappropriate timing for this transformation can result in preterm birth, a severe clinical challenge. One of the fundamental changes of the cervical ECM is the significant modification of the glycosaminoglycan content, especially hyaluronan (HA), which is thought to contribute significantly to the swelling and mechanical properties of the cervix. This study aims to measure the swelling kinetics of cervical tissue during pregnancy and to investigate the role of HA in these swelling tendencies. Results show the significant swelling of cervical tissue, which evolves as pregnancy progresses, highlighting a key material property feature of the remodeled cervix. Using a mouse strain with a cervical HA depletion, this work shows HA contributes to the swelling trends of late-term cervical tissue, in a hypo-osmotic solution.

Hydrostatic mechanical stress regulates growth and maturation of the atrioventricular valve

During valvulogenesis, cytoskeletal, secretory and transcriptional events drive endocardial cushion growth and remodeling into thin fibrous leaflets. Genetic disorders play an important role in understanding valve malformations but only account for a minority of clinical cases. Mechanical forces are ever present, but how they coordinate molecular and cellular decisions remains unclear. In this study, we used osmotic pressure to interrogate how compressive and tensile stresses influence valve growth and shape maturation. We found that compressive stress drives a growth phenotype, whereas tensile stress increases compaction. We identified a mechanically activated switch between valve growth and maturation, by which compression induces cushion growth via BMP-pSMAD1/5, while tension induces maturation via pSer-19-mediated MLC2 contractility. The compressive stress acts through BMP signaling to increase cell proliferation and decrease cell contractility, and MEK-ERK is essential for both compressive stress and BMP mediation of compaction. We further showed that the effects of osmotic stress are conserved through the condensation and elongation stages of development. Together, our results demonstrate that compressive/tensile stress regulation of BMP-pSMAD1/5 and MLC2 contractility orchestrates valve growth and remodeling.

Recent Progress in Cartilage Lubrication

Healthy articular cartilage, covering the ends of bones in major joints such as hips and knees, presents the most efficiently-lubricated surface known in nature, with friction coefficients as low as 0.001 up to physiologically high pressures. Such low friction is indeed essential for its well-being. It minimizes wear-and-tear and hence the cartilage degradation associated with osteoarthritis, the most common joint disease, and, by reducing shear stress on the mechanotransductive, cartilage-embedded chondrocytes (the only cell type in the cartilage), it regulates their function to maintain homeostasis. Understanding the origins of such low friction of the articular cartilage, therefore, is of major importance in order to alleviate disease symptoms, and slow or even reverse its breakdown. This progress report considers the relation between frictional behavior and the cellular mechanical environment in the cartilage, then reviews the mechanism of lubrication in the joints, in particular focusing on boundary lubrication. Following recent advances based on hydration lubrication, a proposed synergy between different molecular components of the synovial joints, acting together in enabling the low friction, has been proposed. Additionally, recent development of natural and bio-inspired lubricants is reviewed.

Characterization of collagen type I/tannic acid beads as a cell scaffold

Breast cancer is the most commonly diagnosed cancer among women worldwide. Surgical removal of tumors is often necessary and many patients suffer complications due to subsequent breast reconstruction. A safe and effective breast reconstructive material is needed for patients recovering from surgical removal of small breast cancer tumors. Our lab has developed injectable collagen/tannic acid beads seeded with patient-derived preadipocytes for regeneration of healthy breast tissue in patients post-lumpectomy. Previous research indicates that the inclusion of tannic acid in the matrix imparts an anticancer property. This research seeks to determine the variables needed to control collagen/tannic acid bead diameter and seeded cell attachment, which are essential to proper bead implantation and function. We found that as tannic acid concentration increases within the beads, cell attachment decreases. Bead diameter is controlled by bead generator voltage, solution osmolality, the degree of cell attachment, and tannic acid concentrations. Higher voltages resulted in significant decrease in bead diameter. Collagen/tannic acid beads decreased in diameter when placed in solutions of increasing osmolality. Higher degrees of cell attachment across the surface of the beads were associated with a significant decrease in diameter. In beads made with high concentrations of tannic acid, bead diameter was found to decrease. Collagen/TA beads are a promising subdermal tissue regenerative matrix with anticancer activity as an alternative to simple lipofilling in breast reconstructive procedures. This study was conducted to better understand the properties of collagen/TA beads in order to improve injection efficacy and tissue regenerative activity.

Strain Assessment of Deep Fascia of the Thigh During Leg Movement: An in situ Study

Fascia is a fibrous connective tissue present all over the body. At the lower limb level, the deep fascia that is overlying muscles of the outer thigh and sheathing them (fascia lata) is involved in various pathologies. However, the understanding and quantification of the mechanisms involved in these sheathing effects are still unclear. The aim of this study is to observe and quantify the strain field of the fascia lata, including the iliotibial tract (ITT), during a passive movement of the knee. Three fresh postmortem human subjects were studied. To measure hip and knee angles during knee flexion-extension, passive movements from 0° to around 120° were recorded with a motion analysis system and strain fields of the fascia were acquired using digital image correlation. Strains were computed for three areas of the fascia lata: anterior fascia, lateral fascia, and ITT. Mean principal strains showed different strain mechanisms depending on location on the fascia and knee angle. For the ITT, two strain mechanisms were observed depending on knee movement: compression is observed when the knee is extended relative to the reference position of 47°, however, tension and pure shear can be observed when the knee is flexed. For the anterior and lateral fascia, in most cases, minor strain is higher than major strain in absolute value, suggesting high tissue compression probably due to microstructural fiber rearrangements. This in situ study is the first attempt to quantify the superficial strain field of fascia lata during passive leg movement. The study presents some limitations but provides a step in understanding strain mechanism of the fascia lata during passive knee movement.

Biological perspectives and current biofabrication strategies in osteochondral tissue engineering

Articular cartilage and the underlying subchondral bone are crucial in human movement and when damaged through disease or trauma impacts severely on quality of life. Cartilage has a limited regenerative capacity due to its avascular composition and current therapeutic interventions have limited efficacy. With a rapidly ageing population globally, the numbers of patients requiring therapy for osteochondral disorders is rising, leading to increasing pressures on healthcare systems. Research into novel therapies using tissue engineering has become a priority. However, rational design of biomimetic and clinically effective tissue constructs requires basic understanding of osteochondral biological composition, structure, and mechanical properties. Furthermore, consideration of material design, scaffold architecture, and biofabrication strategies, is needed to assist in the development of tissue engineering therapies enabling successful translation into the clinical arena. This review provides a starting point for any researcher investigating tissue engineering for osteochondral applications. An overview of biological properties of osteochondral tissue, current clinical practices, the role of tissue engineering and biofabrication, and key challenges associated with new treatments is provided. Developing precisely engineered tissue constructs with mechanical and phenotypic stability is the goal. Future work should focus on multi-stimulatory environments, long-term studies to determine phenotypic alterations and tissue formation, and the development of novel bioreactor systems that can more accurately resemble the in vivo environment.

Systematic investigation of synthetic polyelectrolyte bottlebrush solutions by neutron and dynamic light scattering, osmometry, and molecular dynamics simulation

There is a great interest in the synthesis and characterization of polyelectrolytes that mimic naturally occurring bottlebrush polyelectrolytes to capitalize on the unique properties of this class of macromolecules. Charged bottlebrush polymers form the protective mucus layer in the lungs, stomach, and orifices of animals and provide osmotic stabilization and lubrication to joints. In the present work, we systematically investigate bottlebrush poly(sodium acrylates) through a combination of measurements of solution properties (osmometry, small-angle neutron scattering, and dynamic light scattering) and molecular dynamics simulations, where the bottlebrush properties are compared in each case to their linear polymer counterparts. These complementary experimental and computational methods probe vastly different length- and timescales, allowing for a comprehensive characterization of the supermolecular structure and dynamics of synthetic polyelectrolyte bottlebrush molecules in solution.

Composite Hydrogel Model of Cartilage Predicts Its Load-Bearing Ability

Articular cartilage is a load-bearing tissue found in animal and human joints. It is a composite gel-like material in which a fibrous collagen network encapsulates large proteoglycan assemblies that imbibe fluid and “inflate” the network. Here we describe a composite hydrogel consisting of a cross-linked polyvinyl alcohol matrix filled with poly(acrylic acid) microparticles that mimics functional properties and biomechanical behavior of cartilage. The swelling and mechanical behaviors of this biomimetic model system are strikingly similar to that of human cartilage. The development of synthetic composite gel-based articular cartilage analog suggests new avenues to explore material properties, and their change in disease and degeneration, as well as novel strategies for developing composite tissue-engineered cartilage constructs for regenerative medicine applications.

Mechanics of cervical remodelling: insights from rodent models of pregnancy

The uterine cervix undergoes a complex remodelling process during pregnancy, characterized by dramatic changes in both extracellular matrix (ECM) structure and mechanical properties. Understanding the cervical remodelling process in a term or preterm birth will aid efforts for the prevention of preterm births (PTBs), which currently affect 14.8 million babies annually worldwide. Animal models of pregnancy, particularly rodents, continue to provide valuable insights into the cervical remodelling process, through the study of changes in ECM structure and mechanical properties at defined gestation time points. Currently, there is a lack of a collective, quantitative framework to relate the complex, nonlinear mechanical behaviour of the rodent cervix to changes in ECM structure. This review aims to fill this gap in knowledge by outlining the current understanding of cervical remodelling during pregnancy in rodent models in the context of solid biomechanics. Here we highlight the collective contribution of multiple mechanical studies which give evidence that cervical softening coincides with known ECM changes throughout pregnancy. Taken together, mechanical tests on tissue from pregnant rodents reveal the cervix's remarkable ability to soften dramatically during gestation to allow for a compliant tissue that can withstand damage and can dissipate mechanical loads.

Mechanical Properties of Arterial Elastin With Water Loss

Elastin is a peculiar elastomer in that it requires water to maintain resilience, and its mechanical properties are closely associated with the immediate aqueous environment. The bulk, extra- and intrafibrillar water plays important roles in both elastic and viscoelastic properties of elastin. In this study, a two-stage liquid-vapor method was developed to investigate the effects of water loss on the mechanical properties of porcine aortic elastin. The tissue samples started in a phosphate-buffered saline (PBS) solution at their fully hydrated condition, with a gravimetric water content of 370±36%. The hydration level was reduced by enclosing the tissue in dialysis tubing and submerging it in polyethylene glycol (PEG) solution at concentrations of 10%, 20%, 30%, and 45% w/v, which reduced the water content of the samples to 258±34%, 224±20%, 109±9%, and 58±3%, respectively. The samples were then transferred to a humidity chamber to maintain the hydration level while the samples underwent equi-biaxial tensile and stress relaxation tests. The concentration of 10% PEG treatment induced insignificant changes in tissue dimensions and stiffness, indicating that the removal of bulk water has less effect on elastin. Significant increases in tangent modulus were observed after 20% and 30% PEG treatment due to the decreased presence of extrafibrillar water. Elastin treated with 45% PEG shows a very rigid behavior as most of the extrafibrillar water is eliminated. These results suggest that extrafibrillar water is crucial for elastin to maintain its elastic behavior. It was also observed that the anisotropy of elastin tends to decrease with water loss. An increase in stress relaxation was observed for elastin treated with 30% PEG, indicating a more viscous behavior of elastin when the amount of extrafibrillar water is significantly reduced. Results from this study shed light on the close association between the bulk, extra- and intrafibrillar water pools and the mechanics of elastin.

Depth-dependent ratcheting strains of young and adult articular cartilages by experiments and predictions

Background

Ratcheting strain is produced due to the repeated accumulation of compressive strain in cartilage and may be a precursor to osteoarthritis. The aim of this study was to investigate the ratcheting behaviors of young and adult articular cartilages under cyclic compression by experiments and theoretical predictions.

Methods

A series of uniaxial cyclic compression tests were conducted for young and adult cartilage, and the effects of different loading conditions on their ratcheting behaviors were probed. A theoretical ratcheting model was constructed and applied to predict the ratcheting strains of young and adult cartilages with different loading conditions.

Results

Ratcheting strains of young and adult cartilages rapidly increased at the initial stage, followed by a slower increase in subsequent stages. The strain accumulation value and its rate for young cartilage were greater than them for adult cartilage. The ratcheting strains of the two groups of cartilage samples decreased with increasing stress rate, while they increased with increasing stress amplitude. As the stress amplitude increased, the gap between the ratcheting strains of young and adult cartilages increased gradually. The ratcheting strains of young and adult cartilages decreased along the cartilage depth from the surface to the deep layer. The ratcheting strains of different layers increased with the compressive cycle, and the difference among the three layers was noticeable. Additionally, the theoretical predictions agreed with the experimental data.

Conclusions

Overall, the ratcheting behavior of articular cartilage is affected by the degree of articular cartilage maturation.

Maximum shear strain-based algorithm can predict proteoglycan loss in damaged articular cartilage

Post-traumatic osteoarthritis (PTOA) is a common disease, where the mechanical integrity of articular cartilage is compromised. PTOA can be a result of chondral defects formed due to injurious loading. One of the first changes around defects is proteoglycan depletion. Since there are no methods to restore injured cartilage fully back to its healthy state, preventing the onset and progression of the disease is advisable. However, this is problematic if the disease progression cannot be predicted. Thus, we developed an algorithm to predict proteoglycan loss of injured cartilage by decreasing the fixed charge density (FCD) concentration. We tested several mechanisms based on the local strains or stresses in the tissue for the FCD loss. By choosing the degeneration threshold suggested for inducing chondrocyte apoptosis and cartilage matrix damage, the algorithm driven by the maximum shear strain showed the most substantial FCD losses around the lesion. This is consistent with experimental findings in the literature. We also observed that by using coordinate system-independent strain measures and selecting the degeneration threshold in an ad hoc manner, all the resulting FCD distributions would appear qualitatively similar, i.e., the greatest FCD losses are found at the tissue adjacent to the lesion. The proposed strain-based FCD degeneration algorithm shows a great potential for predicting the progression of PTOA via biomechanical stimuli. This could allow identification of high-risk defects with an increased risk of PTOA progression.

Wave velocities in articular cartilage measured by micro-Brillouin scattering technique

Micro-Brillouin scattering was used to measure gigahertz ultrasonic wave velocities in the articular cartilage of a bovine femur. Velocities propagating parallel to the surface of the subchondral bone were 3.36-3.83 × 10³m/s in a dry cartilage sample. Anisotropy measurements were also performed in a 10-μm-diameter local area of the cartilage matrix. A weak velocity anisotropy reflected characteristics of the layers. The velocity also depended on the water content. In the middle layer, the velocity in the dry sample was 3.58 × 10³m/s, whereas that for a fully wet sample was 2.04 × 10³m/s.

Matrix degradation in osteoarthritis primes the superficial region of cartilage for mechanical damage

Osteoarthritis (OA) is a degenerative disease that affects 25% of the world's population over fifty years of age. It is a chronic disease of the synovial joints, primarily the hip and knee. The main pathologies are degradation of the articular cartilage and changes to the subchondral bone, as a result of both mechanical wear and a locally elevated inflammatory state. This study compares the viscoelastic properties of cartilage that represents the biochemical changes in OA and age-matched healthy tissue. Further, the mechanical damage induced by this compressive loading cycle was characterised and the mechanism for it was investigated. The storage modulus of OA cartilage was shown to be significantly lower than that of healthy cartilage whilst having a higher capacity to hold water. Following mechanical testing, there was a significant increase in the surface roughness of OA cartilage. This change in surface structure occurred following a reduction in sulphated glycosaminoglycan content of the superficial region in OA, as seen by alcian blue staining and quantified by micro X-ray fluorescence. These findings are important in understanding how the chemical changes to cartilage matrix in OA influence its dynamic mechanical properties and structural integrity.

STATEMENT OF SIGNIFICANCE

Cartilage has a very specialised tissue structure which acts to resist compressive loading. In osteoarthritis (OA), there is both mechanically- and chemically-induced damage to cartilage, resulting in severe degradation of the tissue. In this study we have undertaken a detailed mechanical and chemical analysis of macroscopically undamaged OA and healthy cartilage tissue. We have demonstrated, for the first time in human tissue, that the mechanical degradation of the tissue is attributed to a chemical change across the structure. In macroscopically undamaged OA tissue, there is a reduction in the elastic response of cartilage tissue and an associated destabilisation of the matrix that leaves it susceptible to damage. Understanding this allows us to better understand the progression of OA to design better therapeutic interventions.

Non-enzymatic cross-linking of collagen type II fibrils is tuned via osmolality switch

An important aspect in cartilage ageing is accumulation of advanced glycation end products (AGEs) after exposure to sugars. Advanced glycation results in cross-links formation between the collagen fibrils in articular cartilage, hampering their flexibility and making cartilage more brittle. In the current study, we investigate whether collagen cross-linking after exposure to sugars depends on the stretching condition of the collagen fibrils. Healthy equine cartilage specimens were exposed to l-threose sugar and placed in hypo-, iso-, or hyper-osmolal conditions that expanded or shrank the tissue and changed the 3D conformation of collagen fibrils. We applied micro-indentation tests, contrast enhanced micro-computed tomography, biochemical measurement of pentosidine cross-links, and cartilage surface color analysis to assess the effects of advanced glycation cross-linking under these different conditions. Swelling of extracellular matrix due to hypo-osmolality made cartilage less susceptible to advanced glycation, namely, the increase in effective Young's modulus was approximately 80% lower in hypo-osmolality compared to hyper-osmolality and pentosidine content per collagen was 47% lower. These results indicate that healthy levels of glycosaminoglycans not only keep cartilage stiffness at appropriate levels by swelling and pre-stressed collagen fibrils, but also protect collagen fibrils from adverse effects of advanced glycation. These findings highlight the fact that collagen fibrils and therefore cartilage can be protected from further advanced glycation ("ageing") by maintaining the joint environment at sufficiently low osmolality. Understanding of mechanochemistry of collagen fibrils provided here might evoke potential ageing prohibiting strategies against cartilage deterioration. © 2018 The Authors. Journal of Orthopaedic Research Published by Wiley Periodicals, Inc. on behalf of Orthopaedic Research Society. J Orthop Res 36:1929-1936, 2018.

Alterations in structural macromolecules and chondrocyte deformations in lapine retropatellar cartilage 9 weeks after anterior cruciate ligament transection

The structural integrity and mechanical environment of the articular cartilage matrix directly affect chondrocyte deformations. Rabbit models of early osteoarthritis at 9 weeks following anterior cruciate ligament transection (ACLT) have been shown to alter the deformation behavior of superficial zone chondrocytes in mechanically loaded articular cartilage. However, it is not fully understood whether these changes in cell mechanics are caused by changes in structural macromolecules in the extracellular matrix. Therefore, the purpose of this study was to characterize the proteoglycan content, collagen content, and collagen orientation at 9 weeks post ACLT using microscopic techniques, and relate these changes to the altered cell mechanics observed upon mechanical loading of cartilage. At 9 weeks following ACLT, collagen orientation was significantly (p < 0.05) altered and proteoglycan content was significantly (p < 0.05) reduced in the superficial zone cartilage matrix. These structural changes either in the extracellular or pericellular matrix (ECM and PCM) were also correlated significantly (p < 0.05) with chondrocyte width and height changes, thereby suggesting that chondrocyte deformation response to mechanical compression in early OA changes primarily because of alterations in matrix structure. However, compared to the normal group, proteoglycan content in the PCM from the ACLT group decreased less than that in the surrounding ECM. Therefore, PCM could play a key role to protect excessive chondrocyte deformations in the ACLT group. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:342-350, 2018.

Mechanical stiffness of TMJ condylar cartilage increases after artificial aging by ribose

OBJECTIVE

Aging is accompanied by a series of changes in mature tissues that influence their properties and functions. Collagen, as one of the main extracellular components of cartilage, becomes highly crosslinked during aging. In this study, the aim was to examine whether a correlation exists between collagen crosslinking induced by artificial aging and mechanical properties of the temporomandibular joint (TMJ) condyle. To evaluate this hypothesis, collagen crosslinks were induced using ribose incubation.

METHODS

Porcine TMJ condyles were incubated for 7 days with different concentrations of ribose. The compressive modulus and stiffness ratio (incubated versus control) was determined after loading. Glycosaminoglycan and collagen content, and the number of crosslinks were analyzed. Tissue structure was visualized by microscopy using different staining methods.

RESULTS

Concomitant with an increasing concentration of ribose, an increase of collagen crosslinks was found. The number of crosslinks increased almost 50 fold after incubation with the highest concentration of ribose. Simultaneously, the stiffness ratio of the samples showed a significant increase after incubation with the ribose. Pearson correlation analyses showed a significant positive correlation between the overall stiffness ratio and the crosslink level; the higher the number of crosslinks the higher the stiffness.

CONCLUSION

The present model, in which ribose was used to mimic certain aspects of age-related changes, can be employed as an in vitro model to study age-related mechanical changes in the TMJ condyle.

Current strategies for integrative cartilage repair

Osteoarthritis (OA) is a degenerative joint condition characterized by painful cartilage lesions that impair joint mobility. Current treatments such as lavage, microfracture, and osteochondral implantation fail to integrate newly formed tissue with host tissues and establish a stable transition to subchondral bone. Similarly, tissue-engineered grafts that facilitate cartilage and bone regeneration are challenged by how to integrate the graft seamlessly with surrounding host cartilage and/or bone. This review centers on current approaches to promote cartilage graft integration. It begins with an overview of articular cartilage structure and function, as well as degenerative changes to this relationship attributed to aging, disease, and trauma. A discussion of the current progress in integrative cartilage repair follows, focusing on graft or scaffold design strategies targeting cartilage-cartilage and/or cartilage-bone integration. It is emphasized that integrative repair is required to ensure long-term success of the cartilage graft and preserve the integrity of the newly engineered articular cartilage. Studies involving the use of enzymes, choice of cell source, biomaterial selection, growth factor incorporation, and stratified versus gradient scaffolds are therefore highlighted. Moreover, models that accurately evaluate the ability of cartilage grafts to enhance tissue integrity and prevent ectopic calcification are also discussed. A summary and future directions section concludes the review.

Characterization of Articular Cartilage Recovery and Its Correlation with Optical Response in the Near-Infrared Spectral Range

OBJECTIVES

In this study, we examine the capacity of a new parameter, based on the recovery response of articular cartilage, to distinguish between healthy and damaged tissues. We also investigate whether or not this new parameter correlates with the near-infrared (NIR) optical response of articular cartilage.

DESIGN

Normal and artificially degenerated (proteoglycan-depleted) bovine cartilage samples were nondestructively probed using NIR spectroscopy. Subsequently they were subjected to a load and unloading protocol, and the recovery response was logged during unloading. The recovery parameter, elastic rebound ( E_R), is based on the strain energy released as the samples underwent instantaneous elastic recovery.

RESULTS

Our results reveal positive relationship between the rebound parameter and cartilage proteoglycan content (normal samples: 2.20 ± 0.10 N mm; proteoglycan-depleted samples: 0.50 ± 0.04 N mm for 1 hour of enzymatic treatment and 0.13 ± 0.02 N mm for 4 hours of enzymatic treatment). In addition, multivariate analysis using partial least squares regression was employed to investigate the relationship between E_R and NIR spectral data. The results reveal significantly high correlation ( R²_cal = 98.35% and R²_val = 79.87%; P < 0.0001), with relatively low error (14%), between the recovery and optical response of cartilage in the combined NIR regions 5,450 to 6,100 cm^-1 and 7,500 to 12,500 cm^-1.

CONCLUSION

We conclude that E_R can indicate the mechanical condition and state of health of articular cartilage. The correlation of E_R with cartilage optical response in the NIR range could facilitate real-time evaluation of the tissue's integrity during arthroscopic surgery and could also provide an important tool for cartilage assessment in tissue engineering and regeneration research.

Osmotic Properties of Cartilage

Understanding the interactions and organization of various molecular constituents of cartilage is an essential prerequisite to designing and developing effective nuclear magnetic resonance and magnetic resonance imaging (MRI) strategies to characterize the state of this tissue in normal and abnormal development, aging, health and disease, and trauma. In this chapter the osmotic properties of cartilage are discussed. An attempt is made to relate the tissue’s macroscopic behavior to its hierarchical organization and the physical–chemical interactions among its main macromolecular constituents. It is shown how to separate the osmotic contribution of the proteoglycan assemblies from that of the collagen network. The interactions between the main macromolecular components of cartilage extracellular matrix (ECM) are determined using an array of complementary experimental techniques (osmotic pressure measurements, small-angle X-ray scattering, small-angle neutron scattering, dynamic light scattering, and atomic force microscopy) probing the ECM structure and dynamics over a broad range of length and timescales. This knowledge is also important to construct magnetic resonance phantoms for quantitative MRI that exhibit osmotic, mechanical, and relaxation properties similar to that of cartilage. Such biomimetic phantoms with well-characterized physical and imaging properties are critically important to validate MRI characteristics.

Introduction to Cartilage

Cartilage is a supporting connective tissue that, together with the bone, forms the framework supporting the body as a whole. There are many distinct types of cartilage, which exhibit numerous similarities as well as differences. Among them, articular cartilage is the best known and the most studied type. Articular cartilage is the thin layer of connective tissue that covers the articulating ends of bones in synovial (diarthrodial) joints. It provides a smooth surface for joint movement and acts as a load-bearing medium that protects the bone and distributes stress. The intense interest in articular cartilage is motivated by the critical role its degradation plays in arthritis and related joint diseases, which are the number one cause of disability in humans. This chapter discusses the physical, chemical and cellular properties of cartilage that give the tissue its extraordinary load-bearing characteristics.

Descemet membrane adhesion strength is greater in diabetics with advanced disease compared to healthy donor corneas

Descemet membrane endothelial keratoplasty (DMEK) is an increasingly popular surgical procedure for treating ocular diseases that require a corneal transplant. Previous studies have found that tissue tearing during surgical preparation is more likely elevated in eyes from donors with a history of diabetes mellitus. To quantify these potential differences, we established an experimental technique for quantifying the force required to separate the endothelium-Descemet membrane complex (EDM) from stroma in human donor corneal tissue, and we assessed differences in adhesion strength between diabetic and non-diabetic donor corneas. Transplant suitable corneas were obtained from 23 donors 50-75 years old with an average preservation to assay time of 11.5 days. Corneas were classified from a medical records review as non-diabetic (ND, n = 9), diabetic without evidence of advanced disease (NAD, n = 8), or diabetic with evidence of advanced disease (AD, n = 10). Corneas were sectioned into 3 mm wide strips and the EDM peeled from the stroma. Using the force-extension data obtained from mechanical peel testing, EDM elastic peel tension (T_E), elastic stiffness (S_E), average delamination tension (T_D), and maximum tension (T_MAX) were calculated. Mean T_E, S_E, T_D, and T_MAX values for ND corneas were 0.78 ± 0.07 mN/mm, 0.37 ± 0.05 mN/mm/mm, 0.78 ± 0.08 mN/mm, and 0.94 ± 0.17 mN/mm, respectively. NAD values did not differ significantly. However, AD values for T_E (1.01 ± 0.18 mN/mm), T_D (1.09 ± 0.21 mN/mm), and T_MAX (1.37 ± 0.24 mN/mm) were greater than ND and NAD corneas (P < 0.05). S_E did not differ significantly between groups. These findings provide proof of the concept that chronic hyperglycemia from diabetes mellitus results in a phenotypically more adhesive interface between Descemet membrane and the posterior stroma in donor corneal tissue. Results of this study provide a foundation for further investigations into the impact of diabetes on the posterior cornea, eye banking, and keratoplasty.

Effect of crosslinking in cartilage-like collagen microstructures

The mechanical performance of biological tissues is underpinned by a complex and finely balanced structure. Central to this is collagen, the most abundant protein in our bodies, which plays a dominant role in the functioning of tissues, and also in disease. Based on the collagen meshwork of articular cartilage, we have developed a bottom-up spring-node model of collagen and examined the effect of fibril connectivity, implemented by crosslinking, on mechanical behaviour. Although changing individual crosslink stiffness within an order of magnitude had no significant effect on modelling predictions, the density of crosslinks in a meshwork had a substantial impact on its behaviour. Highly crosslinked meshworks maintained a 'normal' configuration under loading, with stronger resistance to deformation and improved recovery relative to sparsely crosslinked meshwork. Stress on individual fibrils, however, was higher in highly crosslinked meshworks. Meshworks with low numbers of crosslinks reconfigured to disease-like states upon deformation and recovery. The importance of collagen interconnectivity may provide insight into the role of ultrastructure and its mechanics in the initiation, and early stages, of diseases such as osteoarthritis.

Effect of collagen cross-linking on quantitative MRI parameters of articular cartilage

OBJECTIVE

To investigate the sensitivity of quantitative magnetic resonance imaging (MRI) parameters to increase of collagen cross-linking in articular cartilage, a factor possibly contributing to the aging-related development of osteoarthritis (OA). The issue has not been widely studied although collagen cross-links may significantly affect the evaluation of cartilage imaging outcome.

DESIGN

Osteochondral samples (n = 14) were prepared from seven bovine patellae. To induce cross-linking, seven samples were incubated in threose while the other seven served as non-treated controls. The specimens were scanned at 9.4 T for T1, T1Gd (dGEMRIC), T2, adiabatic and continuous wave (CW) T1ρ, adiabatic T2ρ and T1sat relaxation times. Specimens from adjacent tissue were identically treated and used for reference to determine biomechanical properties, collagen, proteoglycan and cross-link contents, fixed charge density (FCD), collagen fibril anisotropy and water concentration of cartilage.

RESULTS

In the threose-treated sample group, cross-links (pentosidine, lysyl pyridinoline (LP)), FCD and equilibrium modulus were significantly (P < 0.05) higher as compared to the non-treated group. Threose treatment resulted in significantly greater T1Gd relaxation time constant (+26%, P < 0.05), although proteoglycan content was not altered. Adiabatic and CW-T1ρ were also significantly increased (+16%, +28%, P < 0.05) while pre-contrast T1 was significantly decreased (-10%, P < 0.05) in the threose group. T2, T2ρ and T1sat did not change significantly.

CONCLUSION

Threose treatment induced collagen cross-linking and changes in the properties of articular cartilage, which were detected by T1, T1Gd and T1ρ relaxation time constants. Cross-linking should be considered especially when interpreting the outcome of contrast-enhanced MRI in aging populations.

Finite difference time domain model of ultrasound propagation in agarose scaffold containing collagen or chondrocytes

Measurement of ultrasound backscattering is a promising diagnostic technique for arthroscopic evaluation of articular cartilage. However, contribution of collagen and chondrocytes on ultrasound backscattering and speed of sound in cartilage is not fully understood and is experimentally difficult to study. Agarose hydrogels have been used in tissue engineering applications of cartilage. Therefore, the aim of this study was to simulate the propagation of high frequency ultrasound (40 MHz) in agarose scaffolds with varying concentrations of chondrocytes (1 to 32 × 10(6) cells/ml) and collagen (1.56-200 mg/ml) using transversely isotropic two-dimensional finite difference time domain method (FDTD). Backscatter and speed of sound were evaluated from the simulated pulse-echo and through transmission measurements, respectively. Ultrasound backscatter increased with increasing collagen and chondrocyte concentrations. Furthermore, speed of sound increased with increasing collagen concentration. However, this was not observed with increasing chondrocyte concentrations. The present study suggests that the FDTD method may have some applicability in simulations of ultrasound scattering and propagation in constructs containing collagen and chondrocytes. Findings of this study indicate the significant role of collagen and chondrocytes as ultrasound scatterers and can aid in development of modeling approaches for understanding how cartilage architecture affects to the propagation of high frequency ultrasound.

Connecting the dots: the effects of macromolecular crowding on cell physiology

The physicochemical properties of cellular environments with a high macromolecular content have been systematically characterized to explain differences observed in the diffusion coefficients, kinetics parameters, and thermodynamic properties of proteins inside and outside of cells. However, much less attention has been given to the effects of macromolecular crowding on cell physiology. Here, we review recent findings that shed some light on the role of crowding in various cellular processes, such as reduction of biochemical activities, structural reorganization of the cytoplasm, cytoplasm fluidity, and cellular dormancy. We conclude by presenting some unresolved problems that require the attention of biophysicists, biochemists, and cell physiologists. Although it is still underappreciated, macromolecular crowding plays a critical role in life as we know it.

In Vivo Evaluation of a Novel Oriented Scaffold-BMSC Construct for Enhancing Full-Thickness Articular Cartilage Repair in a Rabbit Model

Tissue engineering (TE) has been proven usefulness in cartilage defect repair. For effective cartilage repair, the structural orientation of the cartilage scaffold should mimic that of native articular cartilage, as this orientation is closely linked to cartilage mechanical functions. Using thermal-induced phase separation (TIPS) technology, we have fabricated an oriented cartilage extracellular matrix (ECM)-derived scaffold with a Young's modulus value 3 times higher than that of a random scaffold. In this study, we test the effectiveness of bone mesenchymal stem cell (BMSC)-scaffold constructs (cell-oriented and random) in repairing full-thickness articular cartilage defects in rabbits. While histological and immunohistochemical analyses revealed efficient cartilage regeneration and cartilaginous matrix secretion at 6 and 12 weeks after transplantation in both groups, the biochemical properties (levels of DNA, GAG, and collagen) and biomechanical values in the oriented scaffold group were higher than that in random group at early time points after implantation. While these differences were not evident at 24 weeks, the biochemical and biomechanical properties of the regenerated cartilage in the oriented scaffold-BMSC construct group were similar to that of native cartilage. These results demonstrate that an oriented scaffold, in combination with differentiated BMSCs can successfully repair full-thickness articular cartilage defects in rabbits, and produce cartilage enhanced biomechanical properties.

Biomechanics of fibrous proteins of the extracellular matrix studied by Brillouin scattering

Brillouin light scattering (BLS) spectroscopy is a technique that is able to detect thermally excited phonons within a material. The speed of propagation of these phonons can be determined from the magnitude of the Brillouin frequency shift between incident and scattered light, thereby providing a measure of the mechanical properties of the material in the gigahertz range. The mechanical properties of the extracellular matrices of biological tissues and their constituent biopolymers are important for normal tissue function and disturbances in these properties are widely implicated in disease. BLS offers the prospect of measuring mechanical properties on a microscopic scale in living tissues, thereby providing insights into structure-function relationships under normal and pathological conditions. In this study, we investigated BLS in collagen and elastin-the fibrous proteins of the extracellular matrix (ECM). Measurements were made on type I collagen in rat tail tendon, type II collagen in articular cartilage and nuchal ligament elastin. The dependence of the BLS spectrum on fibre orientation was investigated in a backscattering geometry using a reflective substrate. Two peaks, a bulk mode arising from phonon propagation along a quasi-radial direction to the fibre axis and a mode parallel to the surface, depending on sample orientation relative to the fibre axis, could be distinguished. The latter peak was fitted to a model of wave propagation through a hexagonally symmetric elastic solid, and the five components of the elasticity tensor were combined to give axial and transverse Young's, shear and bulk moduli of the fibres. These were 10.2, 8.3, 3.2 and 10.9 GPa, and 6.1, 5.3, 1.9 and 8 GPa for dehydrated type I collagen and elastin, respectively. The former values are close to those previously reported. A microfocused BLS approach was also applied providing selection of single fibres. The moduli of collagen and elastin are much higher than those measured at lower frequency using macroscopic strains, and the difference between them is much less. We therefore believe, like previous investigators, that molecular-scale viscoelastic effects are responsible for the frequency dependence of the fibre biomechanics. Combining BLS with larger-scale mechanical testing methods therefore should, in the future, provide a means of following the evolution of mechanical properties in the formation of the complex structures found in the ECM.

Fast Water Diffusion and Long-Term Polymer Reorganization during Nafion Membrane Hydration Evidenced by Time-Resolved Small-Angle Neutron Scattering

We report a small-angle neutron scattering study of liquid water sorption in Nafion membranes. The swelling of hydrophilic domains was measured on the nanoscale by combining in situ time-resolved and long-term static experiments, yielding kinetic curves recorded over an unprecedented time scale, from hundreds of milliseconds to several years. At low water content, typically below 5 water molecules per ionic group, a limited subdiffusive regime was observed and ascribed to nanoconfinement and local interactions between charged species and water molecules. Further ultrafast and thermally activated swelling due to massive liquid water sorption was observed and analyzed by using Fick's equation. The extracted mutual water diffusion coefficients are in good agreement with pulsed field gradient NMR self-diffusion coefficient values, evidencing a water diffusion-driven process due to concentration gradients within the Nafion membrane. Finally, after completion of the ultrafast regime, the kinetic swelling curves exhibit a remarkable long-term behavior scaling as the logarithm of time, showing that the polymer membrane can continuously accommodate additional water molecules upon hydration stress. The present nanoscale kinetics results provide insights into the vapor-versus-liquid sorption mechanisms, the nanostructure of Nafion, and the role of polymer reorganization modes, highlighting that the membrane can never reach a steady state.

Mussel adhesive protein provides cohesive matrix for collagen type-1α

Understanding the interactions between collagen and adhesive mussel foot proteins (mfps) can lead to improved medical and dental adhesives, particularly for collagen-rich tissues. Here we investigated interactions between collagen type-1, the most abundant load-bearing animal protein, and mussel foot protein-3 (mfp-3) using a quartz crystal microbalance and surface forces apparatus (SFA). Both hydrophilic and hydrophobic variants of mfp-3 were exploited to probe the nature of the interaction between the protein and collagen. Our chief findings are: 1) mfp-3 is an effective chaperone for tropocollagen adsorption to TiO2 and mica surfaces; 2) at pH 3, collagen addition between two mfp-3 films (Wc = 5.4 ± 0.2 mJ/m(2)) increased their cohesion by nearly 35%; 3) oxidation of Dopa in mfp-3 by periodate did not abolish the adhesion between collagen and mfp-3 films, and 4) collagen bridging between both hydrophilic and hydrophobic mfp-3 variant films is equally robust, suggesting that hydrophobic interactions play a minor role. Extensive H-bonding, π-cation and electrostatic interactions are more plausible to explain the reversible bridging of mfp-3 films by collagen.