Continuous beds for microchromatography: detection of proteins by a blotting membrane technique

Coupling sodium dodecyl sulfate-capillary polyacrylamide gel electrophoresis with matrix-assisted laser desorption ionization time-of-flight mass spectrometry via a poly(tetrafluoroethylene) membrane

Sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis (PAGE) is a fundamental analytical technique for proteomic research, and SDS-capillary gel electrophoresis (CGE) is its miniaturized version. Compared to conventional slab-gel electrophoresis, SDS-CGE has many advantages such as increased separation efficiency, reduced separation time, and automated operation. SDS-CGE is not widely accepted in proteomic research primarily due to the difficulties in identifying the well-resolved proteins. MALDI-TOF-MS is an outstanding platform for protein identifications. Coupling the two would solve the problem but is extremely challenging because the MS detector has no access to the SDS-CGE-resolved proteins and the SDS interferes with MS detection. In this work we introduce an approach to address these issues. We discover that poly(tetrafluoroethylene) (PTFE) membranes are excellent materials for collecting SDS-CGE-separated proteins. We demonstrate that we can wash off the SDS bound to the collected proteins and identify these proteins on-membrane with MALDI-TOF-MS. We also show that we can immunoblot and Coomassie-stain the proteins collected on these membranes.

Stellan Hjertén's contribution to the development of monolithic stationary phases

This overview is presented to celebrate the birthday of one of the luminaries of the separation science and my friend - Stellan Hjertén. He made significant contributions to a variety of areas in separation science such as electrophoresis, LC, and CEC to name just a few. Since the scope of his work was enormous, this review will focus only on a single aspect of his scientific activities, the design and applications of monolithic materials. During the years starting from 1989, Stellan Hjertén published many excellent papers concerning the preparation of acrylamide chemistry-based monoliths and their use in both micro-HPLC and CEC. The following text details his works in the field.

Use of monolithic supports in proteomics technology

An overview on the utilization of monoliths in proteomics technology will be given. Both silica- and polymer-based monoliths have broad use for microseparation of tryptic peptides in reversed-phase (RP) mode before identification by mass spectrometry (MS) or by MS/MS. For two-dimensional (2D) LC separation of peptides before MS or MS/MS analysis, a combination of ion-exchange, usually cation-exchange (CEX) chromatography with RP chromatography on monolithic supports can be employed. Immobilized metal ion affinity chromatography monoliths with immobilized Fe3+-ions are used for the isolation of phosphopeptides. Monoliths with immobilized affinity ligands are usually applied to the rapid separation of proteins and peptides. Miniaturized reactors with immobilized proteolytic enzymes are utilized for rapid on- or offline digestion of isolated proteins or protein mixtures prior to identification by LC-MS/MS. Monoliths also have broad potential for application in sample preparation, prior to further proteomic analyses. Monolithic supports with large pore sizes can be exploited for the isolation of nanoparticles, such as cells, organelles, viruses and protein aggregates. The potential for further adoption of monolithic supports in protein separation and enrichment of low abundance proteins prior to proteolytic digestion and final LC-MS/MS protein identification will be discussed.

Organic polymer monoliths as stationary phases for capillary HPLC

Modern rigid porous polymer monoliths were conceived as a new class of stationary phases in classical columns in the early 1990s and later extended to the capillary format. These monolithic materials are typically prepared using a simple molding process carried out within the confines of the capillary. Polymerization of a mixture comprising monomers, initiator, and porogenic solvent affords macroporous materials with large through-pores that enable applications in a rapid flow-through mode. Since all the mobile phase must flow through the monolith, convection considerably accelerates mass transport within the monolithic separation medium and improves the separations. As a result, monolithic columns perform well even at very high flow rates. Various mechanisms including thermally and UV initiated free radical polymerization as well as ring opening metathesis copolymerizations were demonstrated for the preparation of monolithic capillary columns. The versatility of these preparation techniques was demonstrated by their use with hydrophobic (styrene, divinylbenzene, butyl methacrylate, ethylene dimethacrylate), hydrophilic (2-hydroxyethyl methacrylate, methacrylamide, methylenebisacrylamide), ionizable (vinylsulfonic acid, 2-acrylamido-2-methyl-propanesulfonic acid), and tailor-made (norborn-2-ene, 1,4,4a,5,8,8a-hexahydro-1,4,5,8-exo,endo-dimethanonaphthalene) monomers. Variation of polymerization conditions enables control of the porous properties of the monolith over a broad range and mediates the hydrodynamic properties of the monolithic columns. The applications of polymer-based monolithic capillary columns are demonstrated for numerous separations in the microHPLC mode.

Continuous beds (monoliths): stationary phases for liquid chromatography formed using the hydrophobic interaction-based phase separation mechanism

The pioneering research work published by Hjertén et al. [J. Chromatogr. 473 (1989) 273] in 1989 dealing with development and application of the continuous bed (monolithic) technique as an attractive alternative for the classical packed columns in chromatography, stimulated further investigations in this direction. The research data published since that time on the development and application of the continuous beds formed using hydrophobic interaction-based phase separation mechanism are reviewed. Some innovative species of the beds, such as polyrotaxane beds or nonparticulate restricted-access materials for direct analysis of the biological fluids in the capillary format are also discussed. Characteristic features and practical details of the continuous bed technique are revealed. Due to many advantages, the continuous bed technique became a competitor with the traditional packings in capillary or chip-based microanalysis. The importance of the continuous bed morphology on the chromatographic characteristics is shown. The applicability of modern microscopic analysis to evaluate the morphology of the continuous beds is demonstrated.

Monoliths as stationary phases for separation of proteins and polynucleotides and enzymatic conversion

Monoliths are considered as a novel generation of stationary phases. They were applied for capillary electrochromatography and liquid chromatography exploiting every action principle such as ion-exchange, affinity recognition, reversed-phase, and hydrophobic interaction. The fast separation was explained by convective transport of the solutes through the bed. The contribution of this mode of transport is similarly explained as done for the beds packed with particles with gigapores. For monolithic beds, the concept of an ultrashort bed was frequently used. This mode of operation allows very short separation time. In many cases a gradient elution is necessary to achieve separation. Examples of applications for protein and polynucleotide separation performed on monoliths are given. Enzymatic conversion was described showing the examples of several immobilzed enzymes.

Control method for integrity of continuous beds

Monoliths are considered to be the latest version of stationary phases for protein chromatography. They are now becoming popular since they exhibit reduced peak broadening due to low mass transfer resistances. A weak point of monoliths may be an inhomogeneous bed, especially when charged groups are present during co-polymerization. This becomes apparent when a protein solution is loaded onto such a monolith. A biphasic breakthrough curve differing from the sigmoidal-shaped one, is observed. Two error functions were used to approximate the breakthrough curve. From these parameters an estimate of the fraction of flow passing through the homogeneously packed part of the bed as well as the inhomogeneously one was derived. This flow pattern was also confirmed by perfusing ferritin through an inhomogeneous monolith and comparing it to an intact one. Electron microscopy and mercury porosimetry did not indicate any abnormalities in the bed.

Continuous beds for microchromatography: chromatofocusing and anion exchange chromatography

A method was developed for the preparation of continuous beds derivatized with polyethyleneimine (PEI) for chromatofocusing and anion exchange chromatography in the capillary mode. First, a continuous bed activated by epoxy groups was synthesized inside a fused silica capillary and became at the same time covalently attached to the inner wall of the capillary. A PEI solution was then pumped through the continuous bed to allow the imine groups in PEI to react with the epoxy groups in the bed. Efficient immobilization of PEI was indicated by the high-resolution separation of standard proteins (hemoglobins C, S, F, and A) in both chromatofocusing and anion exchange chromatography on a capillary column prepared by this method.