A small structural element, Pc-J5/5a, plays dual roles in a group IC1 intron RNA

A kinetic and thermodynamic framework for the Azoarcus group I ribozyme reaction

Determination of quantitative thermodynamic and kinetic frameworks for ribozymes derived from the Azoarcus group I intron and comparisons to their well-studied analogs from the Tetrahymena group I intron reveal similarities and differences between these RNAs. The guanosine (G) substrate binds to the Azoarcus and Tetrahymena ribozymes with similar equilibrium binding constants and similar very slow association rate constants. These and additional literature observations support a model in which the free ribozyme is not conformationally competent to bind G and in which the probability of assuming the binding-competent state is determined by tertiary interactions of peripheral elements. As proposed previously, the slow binding of guanosine may play a role in the specificity of group I intron self-splicing, and slow binding may be used analogously in other biological processes. The internal equilibrium between ribozyme-bound substrates and products is similar for these ribozymes, but the Azoarcus ribozyme does not display the coupling in the binding of substrates that is observed with the Tetrahymena ribozyme, suggesting that local preorganization of the active site and rearrangements within the active site upon substrate binding are different for these ribozymes. Our results also confirm the much greater tertiary binding energy of the 5'-splice site analog with the Azoarcus ribozyme, binding energy that presumably compensates for the fewer base-pairing interactions to allow the 5'-exon intermediate in self splicing to remain bound subsequent to 5'-exon cleavage and prior to exon ligation. Most generally, these frameworks provide a foundation for design and interpretation of experiments investigating fundamental properties of these and other structured RNAs.

Turning limited experimental information into 3D models of RNA

Our understanding of RNA functions in the cell is evolving rapidly. As for proteins, the detailed three-dimensional (3D) structure of RNA is often key to understanding its function. Although crystallography and nuclear magnetic resonance (NMR) can determine the atomic coordinates of some RNA structures, many 3D structures present technical challenges that make these methods difficult to apply. The great flexibility of RNA, its charged backbone, dearth of specific surface features, and propensity for kinetic traps all conspire with its long folding time, to challenge in silico methods for physics-based folding. On the other hand, base-pairing interactions (either in runs to form helices or isolated tertiary contacts) and motifs are often available from relatively low-cost experiments or informatics analyses. We present RNABuilder, a novel code that uses internal coordinate mechanics to satisfy user-specified base pairing and steric forces under chemical constraints. The code recapitulates the topology and characteristic L-shape of tRNA and obtains an accurate noncrystallographic structure of the Tetrahymena ribozyme P4/P6 domain. The algorithm scales nearly linearly with molecule size, opening the door to the modeling of significantly larger structures.

Generation and development of RNA ligase ribozymes with modular architecture through "design and selection"

In vitro selection with long random RNA libraries has been used as a powerful method to generate novel functional RNAs, although it often requires laborious structural analysis of isolated RNA molecules. Rational RNA design is an attractive alternative to avoid this laborious step, but rational design of catalytic modules is still a challenging task. A hybrid strategy of in vitro selection and rational design has been proposed. With this strategy termed “design and selection,” new ribozymes can be generated through installation of catalytic modules onto RNA scaffolds with defined 3D structures. This approach, the concept of which was inspired by the modular architecture of naturally occurring ribozymes, allows prediction of the overall architectures of the resulting ribozymes, and the structural modularity of the resulting ribozymes allows modification of their structures and functions. In this review, we summarize the design, generation, properties, and engineering of four classes of ligase ribozyme generated by design and selection.

The molecular evolution and structural organization of self-splicing group I introns at position 516 in nuclear SSU rDNA of myxomycetes

Group I introns are relatively common within nuclear ribosomal DNA of eukaryotic microorganisms, especially in myxomycetes. Introns at position S516 in the small subunit ribosomal RNA gene are particularly common, but have a sporadic occurrence in myxomycetes. Fuligo septica, Badhamia gracilis, and Physarum flavicomum, all members of the family Physaraceae, contain related group IC1 introns at this site. The F. septica intron was studied at the molecular level and found to self-splice as naked RNA and to generate full-length intron RNA circles during incubation. Group I introns at position S516 appear to have a particularly widespread distribution among protists and fungi. Secondary structural analysis of more than 140 S516 group I introns available in the database revealed five different types of organization, including IC1 introns with and without His-Cys homing endonuclease genes, complex twin-ribozyme introns, IE introns, and degenerate group I-like introns. Both intron structural and phylogenetic analyses indicate a multiple origin of the S516 introns during evolution. The myxomycete introns are related to S516 introns in the more distantly related brown algae and Acanthamoeba species. Possible mechanisms of intron transfer both at the RNA- and DNA-levels are discussed in order to explain the observed widespread, but scattered, phylogenetic distribution.

Long-term evolution of the S788 fungal nuclear small subunit rRNA group I introns

More than 1000 group I introns have been identified in fungal rDNA. Little is known, however, of the splicing and secondary structure evolution of these ribozymes. Here, we use a combination of comparative and biochemical methods to address the evolution and splicing of a vertically inherited group I intron found at position 788 in the fungal small subunit (S) rRNA. The ancestral state of the S788 intron contains a highly conserved core and an extended P5 domain typical of IC1 introns. In contrast, the more derived introns have lost most of P5, and have an accelerated divergence rate within the core region with three functionally important substitutions that unambiguously separate them from the ancestral pool. Of 14 S788 group I introns that were tested for splicing, five, all of the ancestral type, were able to self-splice and produced intron RNA circles in vitro. The more derived S788 introns did not self-splice, and potentially rely on fungal-specific factors to facilitate splicing. In summary, we demonstrate one possible fate of vertically inherited group I introns, the loss of secondary structure elements, lessened selective constraints in the intron core, and ultimately, dependence on host-mediated splicing.

Hydrolytic cleavage by a group I intron ribozyme is dependent on RNA structures not important for splicing

DiGIR2 is the group I splicing-ribozyme of the mobile twin-ribozyme intron Dir.S956-1, present in Didymium nuclear ribosomal DNA. DiGIR2 is responsible for intron excision, exon ligation, 3'-splice site hydrolysis, and full-length intron RNA circle formation. We recently reported that DiGIR2 splicing (intron excision and exon ligation) competes with hydrolysis and subsequent full-length intron circularization. Here we present experimental evidence that hydrolysis at the 3'-splice site in DiGIR2 is dependent on structural elements within the P9 subdomain not involved in splicing. Whereas the GCGA tetra-loop in P9b was found to be important in hydrolytic cleavage, probably due to tertiary RNA-RNA interactions, the P9.2 hairpin structure was found to be essential for hydrolysis. The most important positions in P9.2 include three adenosines in the terminal loop (L9.2) and a consensus kink-turn motif in the proximal stem. We suggest that the L9.2 adenosines and the kink-motif represent key regulatory elements in the splicing and hydrolytic reaction pathways.

Biochemical characterization of the kink-turn RNA motif

RNA, which acts as a medium for transmitting genetic information, plays a variety of roles in a cell. As with proteins, elucidation of the three- dimensional (3D) structures of RNAs is important for understanding their various roles. Determination of the atomic structures of crystallized ribosome has enabled the identification of previously unknown RNA structural motifs. The kink-turn (K-turn or GA) motif, which causes a sharp bend in an RNA double helix, was identified as one of these structural motifs. To biochemically characterize the K-turn, the motif was inserted into a hinge region of P4-P6 RNA, which is the most extensively studied self-folding RNA, and its properties were investigated. The stability and metal ion requirement of the constructs containing three different K-turn motifs were analyzed using native PAGE and dimethyl sulfate (DMS) modification. The formation of the sharp bending structure depends on the presence of divalent cation like Mg2+ or Ca2+, although its required concentration is different for each motif.

Design, construction, and analysis of a novel class of self-folding RNA

RNA can play multiple biological roles through use of its three-dimensional (3-D) structures. Recent advances in RNA structural biology have revealed that complex RNA 3D structures are assemblages of double-stranded helices with a variety of tertiary structural motifs. By employing RNA tertiary structural motifs together with the helices, we designed a novel class of self-folding RNA. In RNA composed of three helices (P1, P2, and P3), P1 interacts with P3 via a tetraloop-receptor interaction and P2 forms consecutive base-triples. Two designed RNAs of this class were prepared and their folding properties indicate that they form defined tertiary structures as designed. These RNAs may be used as modular units for constructing artificial ribozymes or nanometer-scale materials.