Self-Assembled Monolayers of Alkylammonium Ions on Mica: Direct Determination of the Orientation of the Alkyl Chains

Aggregation of alkyltrimethylammonium ions at the cleaved muscovite mica-water interface: a Monte Carlo study

The precise molecular structure of organically modified mineral surfaces is still not well understood. To establish a relation between experimental observations and underlying molecular structure, we performed Monte Carlo simulations of the aggregation behavior of alkyltrimethylammonium surfactants (C(n)TMA(+)) at the interface between C(n)TMACl solution and cleaved K(+)-muscovite. The structures were examined with regard to the influence of varying alkyl chain length n (n = 8, 12, 16) and surface coverage of C(n)TMA(+) ions. The simulation results indicate that the water film structure at the muscovite surface is considerably influenced by the adsorption of C(n)TMA(+). A fraction of the C(n)TMA(+) ions forms inner-sphere and outer-sphere adsorption complexes with nitrogen-surface distances of 3.3-3.8 and 5.5-8.4 Å, respectively. The simulated monolayer aggregates exhibit thicknesses of 31-35, 22-27, and ∼18 Å for C(16)TMA(+), C(12)TMA(+), and C(8)TMA(+), respectively. C(16)TMA(+) and C(12)TMA(+) ions form bilayer aggregates, which show a strong interdigitation of the two opposing layers composing them. The aggregate thicknesses equal 35-39 and 30-35 Å, respectively, and are in agreement with available experimental data. In contrast, the short-chained C(8)TMA(+) ions do not form bilayer aggregates. In agreement with previous experimental studies, the alkyl chains of the aggregated ions show high conformational order markedly decreasing with decreasing chain length. We suggest that the simulated structures represent C(n)TMA(+) aggregates, which are formed on muscovite during the experimentally observed initial equilibration phase characterized by the presence of inorganic ions within the aggregates.

Pure and Molecularly Mixed Methyl- and Hydroxyl-Terminated Self-Assembled Dialkylammonium Monolayers on Mica: Wettability and Conformational Order

Muscovite mica surfaces were coated with methyl- and hydroxyl-terminated dialkyldimethylammonium monolayers via ion exchange by immersion of the substrates into solutions of the corresponding salts. The samples were examined by water contact-angle measurements and near edge X-Ray absorption fine structure spectroscopy (NEXAFS). The purely methyl-terminated species was found to form self-assembled monolayers (SAMs) of comparable quality to those of a similar thiol/gold system as has been reported earlier. The hydroxyl-terminated surfactant established films with a lower degree of orientation under the same preparation conditions and showed a high water contact angle value for a hydrophilic surface (47°). The molecularly mixed film where one alkyl chain of the surfactant is methyl terminated and one hydroxyl terminated had a significantly lower wettability but established a similar degree of orientation as the film prepared from the purely OH-terminated species.

Relation between packing density and thermal transitions of alkyl chains on layered silicate and metal surfaces

Self-assembled layers of alkyl chains grafted onto the surfaces of layered silicates, metal, and oxidic nanoparticles are utilized to control interactions with external media by tuning the packing density of the chains on the surface, head group functionality, and chain length. Characterization through experiment and simulation shows that the orientation of the alkyl layers and reversible phase transitions on heating are a function of the cross-sectional area of the alkyl chains in relation to the available surface area per alkyl chain. On even surfaces, a packing density less than 0.2 leads to nearly parallel orientation of the alkyl chains on the surface, a high degree of conformational disorder, and no reversible melting transitions. A packing density between 0.2 and 0.75 leads to intermediate inclination angles, semicrystalline order, and reversible melting transitions on heating. A packing density above 0.75 results in nearly vertical alignment of the surfactants on the surface, a high degree of crystalline character, and absence of reversible melting transitions. Curved surfaces can be understood by the same principle, taking into account a local radius of curvature and a distance-dependent packing density on the surface. In good approximation, this simple model is independent from the length of the alkyl chains (a minimum length of C10 is required to form sufficiently distinctive patterns), the chemical nature of the surface, and of the surfactant head group. These structural details primarily determine the functionality of alkyl modified surfaces and the temperature of thermal transitions.

Solvent dependence of the molecular order in ion-exchanged self-assembled dialkylammonium monolayers on mica studied with soft X-ray absorption

Dialkyldimethylammonium films on mica prepared via ion exchange from solution have been reported to be of high quality in terms of their density and molecular orientation. Different preparation procedures are described in the literature. The molecular order and the inclination of the alkyl chains, however, are often deduced from indirect experimental evidence such as the wettability and the film thickness. In the present study we employed near edge X-ray absorption fine structure spectroscopy (NEXAFS) to determine directly the order of the molecules adsorbed from different solvents (water, methanol, water/methanol 1:1, cyclohexanol, and chloroform). It was found that films prepared from different solvents are displaying large differences in the established surface coverage and orientation. In particular, NEXAFS disclosed that the orientation of the alkyl chains can differ significantly even when similar water contact angle values are observed.

Chain-length dependence of the conformational order in self-assembled dialkylammonium monolayers on mica studied with soft X-ray absorption

Self-assembled alkyl chain based monolayers on mica are important for industrial and technological processes since they can be employed for an organic modification of the inorganic substrate. The conformational structure and orientational order of the films determine the interaction of the modified substrate with the environment and the chemical character and stability of its surface. We have studied the conformational order in ion exchanged dialkylammonium monolayers adsorbed on mica depending on the length of the alkyl chains systematically with near-edge X-ray absorption fine structure spectroscopy (NEXAFS). In addition, films were characterized by water contact angle measurements. The experimentally determined average tilt angles of the chains are discussed in terms of the degree of order. It was found that the absolute number of gauche defects in the films increases with decreasing chain length.

Structure and phase transitions of alkyl chains on mica

We use molecular dynamics as a tool to understand the structure and phase transitions [Osman, M. A.; et al. J. Phys. Chem. B 2000, 104, 4433-4439. Osman, M. A.; et al. J. Phys. Chem. B 2002, 106, 653-662] in alkylammonium micas. The consistent force field 91 is extended for accurate simulation of mica and related minerals. We investigate mica sheets with 12 octadecyltrimethylammonium (C(18)) ions or 12 dioctadecyldimethylammonium (2C(18)) ions, respectively, as single and layered structures at different temperatures with periodicity in the xy plane by NVT dynamics. The alkylammonium ions reside preferably above the cavities in the mica surface with an aluminum-rich boundary. The nitrogen atoms are 380-390 pm away from the superficial silicon-aluminum plane. With increasing temperature, rearrangements of C(18) ions on the mica surface are found, while 2C(18) ions remain tethered due to geometric restraints. We present basal-plane spacings in the duplicate structures, tilt angles of the alkyl chains, and gauche-trans ratios to analyze the chain conformation. Agreement with experimental data, where available, is quantitative. In C(18)-mica with less than 100% alkali-ion exchange, the disordered C(18) rods in the island structures [Hayes, W. A.; Schwartz, D. K. Langmuir 1998, 14, 5913-5917] break at 40 degrees C. At 60 degrees C, the headgroups of the C(18) alkyl chains rearrange on the mica surface, and the broken chain backbones assume a coillike structure. The C(18)-mica obtained on fast cooling of this phase is metastable due to slow reverse rearrangements of the headgroups. In 2C(18)-mica with 70-80% ion exchange, the alkali ions are interspersed between the alkyl chains, corresponding to a single phase on the surface. The observed phase transition at approximately 53 degrees C involves an increase of chain disorder (partial melting) of the 2C(18) ions without significant rearrangements on the mica surface. We propose a geometric parameter lambda for the saturation of the surface with alkyl chains, which determines the preferred self-assembly pattern, that is, islands, intermediate, or continuous. lambda allows the calculation of tilt angles in continuous layers on mica or other surfaces. The thermal decomposition seems to be a Hofmann elimination with mica as a base-template.