Capillary Rise in Granitic Rocks: Interpretation of Kinetics on the Basis of Pore Structure

Fabrication, characterization, and fat substitution application in chocolate spreads of methyl cellulose and xanthan gum foam-templated oleogels

Food-grade oleogels were prepared by lyophilizing the foam-template of methyl cellulose (MC) and xanthan gum (XG). The cryogels prepared using MC exhibited low density, high porosity and firmness, as well as high oil absorption capacity (OAC) and oil binding capacity (OBC). Furthermore, the addition of XG improved properties of cryogels. As the concentrations of MC and XG were incremented, notable enhancements in the cryogels' density and firmness were observed, accompanied by a corresponding decrease in porosity. Upon attaining MC concentration of 1.2 % and XG concentration of 0.3 %, the OBC of the cryogels surpassed 90 %. SEM images revealed that the cryogels possessed a dense and highly uniform porous network structure. Furthermore, oleogels formulated using the higher viscosity variant of MC (designated as MC3) exhibited greater firmness and apparent viscosity, resulting in the formation of a robust network structure that demonstrated excellent thermal stability. The incorporation of oleogels into chocolate spreads significantly enhanced textural and rheological characteristics, while simultaneously decreasing their enthalpy of crystallization. Notably, the partial substitution of these oleogels in the spreads yielded a crystalline morphology that was indistinguishable from those prepared solely with saturated fats, indicating a successful integration and preservation of desirable structural attributes.

Edible polysaccharide-based oleogels and novel emulsion gels as fat analogues: A review

Polysaccharide-based oleogels and emulsion gels have become novel strategies to replace solid fats due to safe and plentiful raw material, healthier fatty acid composition, controllable viscoelasticity, and more varied nutrition/flavor embedding. Recently, various oleogelation techniques and novel emulsion gels have been reported further to enrich the potential of polysaccharides in oil structuring, in which a crucial step is to promote the formation of polysaccharide networks determining gel properties through different media. Meanwhile, polysaccharide-based oleogels and emulsion gels have good oil holding, nutrient/flavor embedding, and 3D food printability, and their applications as fat substitutes have been explored in foods. This paper comprehensively reviews the types, preparation methods, and mechanisms of various polysaccharide-based oleogels and emulsion gels; meanwhile, the food applications and new trends of polysaccharide-based gels are discussed. Moreover, some viewpoints about potential developments and application challenges of polysaccharide-based gels are mentioned. In the future, polysaccharide-based gels may be flexible materials for customized nutritional foods and molecular gastronomy. However, it is still a challenge to select the appropriate oleogels or emulsion gels to meet the requirements of the products. Once this issue is addressed, oleogels and emulsion gels are anticipated to be used widely.

Capillary water absorption values estimation of building stones by ensembled and hybrid SVR models

The absorption of capillary water is one of the most crucial factors in the flow of groundwater in rocks (CWA). Although meticulous experimental studies are needed to determine a rock’s CWA, predictive techniques might cut down on the expense and effort. There are various data mining methods for this purpose, but the considered algorithms in this study were not proposed so far for predicting the CWA. Different rock samples were taken for this purpose from various locations, yielding diverse rocks. For the prediction procedures, four support vector regression (SVR) models were created: a traditional SVR, two ensembled models, and a hybrid SVR model using the whale optimization technique (WOA - SVR). Results show that all models have acceptable performance in predicting the CWA with R 2 larger than 0.797 and 0.806 for the training and testing data, respectively, representing the acceptable correlation between observed and predicted values. Regarding developed models, the conventional SVR model has the worst performance of all models. All statistical evaluation criteria were improved by assembling models, which present the ability of additive regression and bagging predictions in improving prediction processes. The hybrid WOA - SVR model has the best performance considering all indices. This hybrid model could also gain the lowest values of error indices between all SVR models, which leads to outperforming the WOA - SVR model compared to other methods.

Hybrid ANFIS models were used to calculate the capillary water absorption values of construction stones

The most significant parameter in groundwater movement in stones is capillary water absorption. Specifying the capillary water absorption (CWP) of rocks needs hard and laborious experimental work, while prediction models can reduce the cost and required time. To this aim, different rock specimens were gathered from various rocks. For the prediction processes, the hybrid adaptive neuro-fuzzy inference system (ANFIS) models also were proposed to determine the optimal value of two constituent parameters of the ANFIS, which the particle swarm optimization (PSO) and whale optimization algorithm (WOA) algorithm applied to the ANFIS for this aim. Results present that ANFIS processes have passable accomplishment in forecasting the CWA with R 2 larger than 0.832 and 0.917 for the training and testing data, respectively, a good connection among actual and anticipated values. Considering developed models, the ANFIS model optimized with WOA performs better than another model in training and testing datasets. In the training dataset, the value of R2 and RRSE is 0.917 and 29.29% for the WOA-ANFIS model, while the PSO-ANFIS model is 0.911 and 30.50%, respectively. Overall, it is clear that WOA-ANFIS can be recognized as the proposed model, which shows its capability to find the optimal value of two constituent parameters of the ANFIS.

Evaluation of side effects of mechanical cleaning with an anionic detergent on granite cladding tiles

One of the aims of Goal 11 of the UN's 2030 Agenda for Sustainable Development is to make human settlements sustainable. Some effort should therefore focus on developing maintenance strategies for buildings. Polished granite cladding tiles are very popular for use as flooring material in private and public buildings. These tiles are often treated by mechanical cleaning with detergents and scrubbers, and anionic detergents without chelating agents are usually used to prevent damaging the material. In this study, the anionic detergent Teepol® was applied to granite tiles in order to determine the effect of the treatment on the surface properties of this stone, i.e. appearance, colour, gloss, roughness and hydrophobicity. The results obtained were explained by scanning electron microscopy observations, which enabled characterisation of the microtexture of the surfaces, chemical contamination and any damage to the different granite-forming minerals. The results were compared with those obtained for tiles cleaned by the same mechanical procedure but with tap water in place of detergent and for tiles treated by immersion in water without any mechanical action. In summary, the properties evaluated were affected by the extraction of the typical oxyhydroxylated iron forms that fill cracks in the granite and by the formation of new cracks due to the mechanical action. Moreover, colour changes and the chemical contamination (C-rich deposits with Na, S, Cl, Ca and Mg) hindered the effectiveness of the cleaning procedure.

Exposure to artificial daylight or UV irradiation (A, B or C) prior to chemical cleaning: an effective combination for removing phototrophs from granite

This study evaluated whether exposing samples of granite colonized by a natural biofilm to artificial daylight or UV-A/B/C irradiation for 48 h enhanced removal of the biofilm with a chemical product previously approved for conservation of monuments by the European Biocide Directive. Rodas granite, which is commonly found in stone-built heritage monuments in Galicia (NW Spain), was naturally colonized by a sub-aerial biofilm. The efficacy of the cleaning method was evaluated relative to uncolonized surfaces and colonized control samples without previous irradiation, treated by dry-brushing or with benzalkonium chloride. The effect of UV irradiation in the combined treatment was evident, as comparable cleaning levels were not reached in the controls. Although the biofilm was not totally removed by any of the treatments, UV-B irradiation followed by benzalkonium chloride was potentially useful for cleaning stone, with results comparable to those achieved by UV-C irradiation, which is known to have germicidal effects.

Effectiveness of granite cleaning procedures in cultural heritage: A review

Most of the Cultural Heritage built in NW Iberian Peninsula is made of granite which exposition to the environment leads to the formation of deposits and coatings, mainly two types: biological colonization and sulphated black crusts. Nowadays, another form of alteration derives from graffiti paints when these are applied as an act of vandalism. A deep revision needs to be addressed considering the severity of these deterioration forms on granite and the different cleaning effectiveness achieved by cleaning procedures used to remove them. The scientific literature about these topics on granite is scarcer than on sedimentary carbonate stones and marbles, but the importance of the granite in NW Iberian Peninsula Cultural Heritage claims this review centred on biological colonization, sulphated black crusts and graffiti on granite and their effectiveness of the common cleaning procedures. Furthermore, this paper carried out a review of the knowledge about those three alteration forms on granite, as well as bringing together all the major studies in the field of the granite cleaning with traditional procedures (chemical and mechanical) and with the recent developed technique based on the laser ablation. Findings concerning the effectiveness evaluation of these cleaning procedures, considering the coating extraction ability and the damage induced on the granite surface, are described. Finally, some futures research lines are pointed out.

Calibration of Raman spectroscopy at 1064 nm for beeswax quantification

In the early sixties, coating with molten beeswax was considered a valuable method for preventing the erosive action of weather and/or salinity on the surface of granite sculptures and monuments. This technique had been traditionally employed by the Galician stoneworkers for partial repair of historical monuments. For this purpose, beeswax was applied to the Renaissance Frieze in the Cloister of the Cathedral of Santiago de Compostela in Galicia (Northwest Spain). The beeswax treatment was counterproductive. An intense grain disaggregation of the granite can be observed in the Frieze, owing to the crystallization of salts. As a consequence, the restoration of the Cloister presents many problems. This fact imposes the need for an exhaustive study of the wax-stone system and the demand for a nondestructive method to measure the beeswax thickness at the stone surface. The aim of this contribution is the evaluation of a laser-based method, namely Fourier transform Raman spectroscopy, for analyzing the wax presence in specific rocky material of the Frieze to be restored. To obtain a reliable quantitative calibration, we prepared beeswax films of five different thicknesses on aluminum plates (26.6-97.2 microm). Nylon was selected as external reference to obtain the Raman emission independently from the laser beam power. The ratios of the relative intensities of the Raman bands corresponding to beeswax and nylon were used for the construction of a calibration curve used for the quantitative analysis. The intensities at 2879 cm(-1), I(c2879), and 2880 cm(-1), I(n2880), for beeswax and nylon, respectively, in the Raman spectra of each material were used. A linear dependence was found for the ratio I(c2879)/I(n2880) with the beeswax thickness. The validation of this calibration curve was tested with a second validation set of samples that spans beeswax film thicknesses both inside and outside the calibration range (12.1 to 180 mum), in order to evaluate in addition the accuracy of the model at extrapolation. Without complex sample preparation, near-infrared Raman spectroscopy resulted in an effective technique for localizing the wax with lateral resolution of tens of micrometers, and for determining wax layer thickness in the stone with an uncertainty of a few micrometers.

Capillary rise kinetics of some building materials

The presence of water in masonry is one of the main factors in deterioration. Capillary rise is the most usual mechanism of water penetration into building materials. In this study the kinetics of the capillary rise phenomenon was studied for various building materials: four stones, two bricks, and six plasters. A first-order kinetic model was proposed, in which the equilibrium moisture height derived from Darcy law. The capillary height time constant found to be strongly affected by the material characteristics. Moreover, the capillary height time constant can be predicted if the average pore radius of the materials is known.