Assemblies of replication initiator protein on symmetric and asymmetric DNA sequences depend on multiple protein oligomerization surfaces

Handcuffing reversal is facilitated by proteases and replication initiator monomers

Specific nucleoprotein complexes are formed strictly to prevent over-initiation of DNA replication. An example of those is the so-called handcuff complex, in which two plasmid molecules are coupled together with plasmid-encoded replication initiation protein (Rep). In this work, we elucidate the mechanism of the handcuff complex disruption. In vitro tests, including dissociation progress analysis, demonstrate that the dimeric variants of plasmid RK2 replication initiation protein TrfA are involved in assembling the plasmid handcuff complex which, as we found, reveals high stability. Particular proteases, namely Lon and ClpAP, disrupt the handcuff by degrading TrfA, thus affecting plasmid stability. Moreover, our data demonstrate that TrfA monomers are able to dissociate handcuffed plasmid molecules. Those monomers displace TrfA molecules, which are involved in handcuff formation, and through interaction with the uncoupled plasmid replication origins they re-initiate DNA synthesis. We discuss the relevance of both Rep monomers and host proteases for plasmid maintenance under vegetative and stress conditions.

Mechanisms of Theta Plasmid Replication

Plasmids are autonomously replicating pieces of DNA. This article discusses theta plasmid replication, which is a class of circular plasmid replication that includes ColE1-like origins of replication popular with expression vectors. All modalities of theta plasmid replication initiate synthesis with the leading strand at a predetermined site and complete replication through recruitment of the host's replisome, which extends the leading strand continuously while synthesizing the lagging strand discontinuously. There are clear differences between different modalities of theta plasmid replication in mechanisms of DNA duplex melting and in priming of leading- and lagging-strand synthesis. In some replicons duplex melting depends on transcription, while other replicons rely on plasmid-encoded trans-acting proteins (Reps); primers for leading-strand synthesis can be generated through processing of a transcript or in other replicons by the action of host- or plasmid-encoded primases. None of these processes require DNA breaks. The frequency of replication initiation is tightly regulated to facilitate establishment in permissive hosts and to achieve a steady state. The last section of the article reviews how plasmid copy number is sensed and how this feedback modulates the frequency of replication.

Iteron Plasmids

Iteron-containing plasmids are model systems for studying the metabolism of extrachromosomal genetic elements in bacterial cells. Here we describe the current knowledge and understanding of the structure of iteron-containing replicons, the structure of the iteron plasmid encoded replication initiation proteins, and the molecular mechanisms for iteron plasmid DNA replication initiation. We also discuss the current understanding of control mechanisms affecting the plasmid copy number and how host chaperone proteins and proteases can affect plasmid maintenance in bacterial cells.

Plasmid R6K replication control

The focus of this minireview is the replication control of the 39.9-kb plasmid R6K and its derivatives. Historically, this plasmid was thought to have a narrow host range but more recent findings indicate that its derivatives can replicate in a variety of enteric and non-enteric bacterial species (Wild et al., 2004). In the four-plus decades since it was first described, R6K has proven to be an excellent model for studies of plasmid DNA replication. In part this is because of its similarities to other systems in which replication is activated and regulated by Rep protein and iteron-containing DNA. However its apparent idiosynchracies have also added to its significance (e.g., independent and co-dependent replication origins, and Rep dimers that stably bind iterons). Here, we survey the current state of knowledge regarding R6K replication and place individual regulatory elements into a proposed homeostatic model with implications for the biological significance of R6K and its multiple origins of replication.

Fluorescence studies of the replication initiator protein RepA in complex with operator and iteron sequences and free in solution

RepA, the replication initiator protein from the Pseudomonas plasmid pPS10, regulates plasmid replication and copy number. It is capable of autorepression, in which case it binds as a dimer to the inverted repeat operator sequence preceding its own gene. RepA initiates plasmid replication by binding as a monomer to a series of four adjacent iterons, which contain the same half-repeat as found in the operator sequence. RepA contains two domains, one of which binds specifically to the half-repeat. The other is the dimerization domain, which is involved in protein-protein interactions in the dimeric RepA-operon complex, but which actually binds DNA in the monomeric RepA-iteron complex. Here, detailed fluorescence studies on RepA and an N-(iodoacetyl)aminoethyl-8-naphthylamine-1-sulfonic acid-labeled single-cysteine mutant of RepA (Cys160) are described. Using time-resolved fluorescence depolarization measurements, the global rotational correlation times of RepA free in solution and bound to the operator and to two distinct iteron dsDNA oligonucleotides were determined. These provide indications that, in addition to the monomeric RepA-iteron complex, a stable dimeric RepA-iteron complex can also exist. Further, Förster resonance energy transfer between Trp94, located in the dimerization domain, and N-(iodoacetyl)aminoethyl-8-naphthylamine-1-sulfonic acid-Cys160, located on the DNA-binding domain, is observed and used to estimate the distance between the two fluorophores. This distance may serve as an indicator of the orientation between both domains in the unbound protein and RepA bound to the various cognate DNA sequences. No major change in distance is observed and this is taken as evidence for little to no re-orientation of both domains upon complex formation.

Nucleotide sequence of pOLA52: a conjugative IncX1 plasmid from Escherichia coli which enables biofilm formation and multidrug efflux

The large conjugative multidrug resistance (MDR) plasmid pOLA52 was sequenced and annotated. The plasmid encodes two phenotypes normally associated with the chromosomes of opportunistic pathogens, namely MDR via a resistance-nodulation-division (RND)-type efflux-pump (oqxAB), and the formation of type 3 fimbriae (mrkABCDF). The plasmid was found to be 51,602 bp long with 68 putative genes. About half of the plasmid constituted a conserved IncX1-type backbone with predicted regions for conjugation, replication and partitioning, as well as a toxin/antitoxin (TA) plasmid addiction system. The plasmid was also classified as IncX1 with incompatibility testing. The conjugal transfer and plasmid maintenance regions of pOLA52 therefore seem to represent IncX1 orthologues of the well-characterized IncX2 plasmid R6K. Sequence homology searches in GenBank also suggested a considerably higher prevalence of IncX1 group plasmids than IncX2. The 21 kb 'genetic load' region of pOLA52 was shown to consist of a mosaic, among other things a fragmented Tn3 transposon encoding ampicillin resistance. Most notably the oqxAB and mrkABCDF cassettes were contained within two composite transposons (Tn6010 and Tn6011) that seemed to originate from Klebsiella pneumoniae, thus demonstrating the capability of IncX1 plasmids of facilitating lateral transfer of gene cassettes between different Enterobacteriaceae.

Negative regulation of pPS10 plasmid replication: origin pairing by zipping-up DNA-bound RepA monomers

In many plasmid replicons of gram-negative bacteria, Rep protein dimers are transcriptional self-repressors of their genes, whereas monomers are initiators of DNA replication. Switching between both functions implies conformational remodelling of Rep, and is promoted by Rep binding to the origin DNA repeats (iterons) or chaperones. Rep proteins play another key role: they bridge together two iteron DNA stretches, found either on the same or on different plasmid molecules. These so-called, respectively, 'looped' and 'handcuffed' complexes are thought to be negative regulators of plasmid replication. Although evidence for Rep-dependent plasmid handcuffing has been found in a number of replicons, the structure of these Rep-DNA assemblies is still unknown. Here, by a combination of proteomics, electron microscopy, genetic analysis and modelling, we provide insight on a possible three-dimensional structure for two handcuffed arrays of the iterons found at the origin of pPS10 replicon. These are brought together in parallel register by zipping-up DNA-bound RepA monomers. We also present evidence for a distinct role of RepA dimers in DNA looping. This work defines a new regulatory interface in Rep proteins.

Cooperative binding mode of the inhibitors of R6K replication, pi dimers

The replication initiator protein, pi, plays an essential role in the initiation of plasmid R6K replication. Both monomers and dimers of pi bind to iterons in the gamma origin of plasmid R6K, yet monomers facilitate open complex formation, while dimers, the predominant form in the cell, do not. Consequently, pi monomers activate replication, while pi dimers inhibit replication. Recently, it was shown that the monomeric form of pi binds multiple tandem iterons in a strongly cooperative fashion, which might explain how monomers outcompete dimers for replication initiation when plasmid copy number and pi supply are low. Here, we examine cooperative binding of pi dimers and explore the role that these interactions may have in the inactivation of gamma origin. To examine pi dimer/iteron interactions in the absence of competing pi monomer/iteron interactions using wild-type pi, constructs were made with key base changes to each iteron that eliminate pi monomer binding yet have no impact on pi dimer binding. Our results indicate that, in the absence of pi monomers, pi dimers bind with greater cooperativity to alternate iterons than to adjacent iterons, thus preferentially leaving intervening iterons unbound and the origin unsaturated. We discuss new insights into plasmid replication control by pi dimers.

Structure-based functional analysis of the replication protein of plasmid R6K: key amino acids at the pi/DNA interface

In previous work, we characterized the bases in an iteron of plasmid R6K that are important for the binding of pi protein monomers and dimers. Here we investigate the following six amino acids of pi, encoded by pir, hypothesized to be important for DNA contact: Ser71, Try74, Gly131, Gly211, Arg225, and Arg254.

Sequence analysis of p53 response-elements suggests multiple binding modes of the p53 tetramer to DNA targets

The p53 tetramer recognizes specifically a 20-bp DNA element. Here, we examined symmetries encoded in p53 response elements (p53REs). We analyzed base inversion correlations within the half-site, as well as in the full-site palindrome. We found that p53REs are not only direct repeats of half-sites; rather, two p53 half-sites couple to form a higher order 20 bp palindrome. The palindrome couplings between the half-sites are stronger for the human than for the mouse genome. The full-site palindrome and half-site palindrome are controlled by insertions between the two half-sites. The most notable feature is that the full-site palindrome with coupling between quarter-sites one and four (H14 coupling) dominates the p53REs without insertions. The most frequently observed insertion in human p53REs of 3 bp enhances the half-site palindrome. The statistical frequencies of the coupling between the half-sites in the human genome correlate with grouped experimental p53 affinities with p53REs. Examination of known p53REs indicates the H14 couplings are stronger for positive regulation than for negatively regulated p53REs, with repressors having the lowest H14 couplings. We propose that the palindromic sequence couplings may encode such potential preferred multiple binding modes of the p53 tetramer to DNA.

Mechanism of origin activation by monomers of R6K-encoded pi protein

One recurring theme in plasmid duplication is the recognition of the origin of replication (ori) by specific Rep proteins that bind to DNA sequences called iterons. For plasmid R6K, this process involves a complex interplay between monomers and dimers of the Rep protein, pi, with seven tandem iterons of gamma ori. Remarkably, both pi monomers and pi dimers can bind to iterons, a new paradigm in replication control. Dimers, the predominant form in the cell, inhibit replication, while monomers facilitate open complex formation and activate the ori. Here, we investigate a mechanism by which pi monomers out-compete pi dimers for iteron binding, and in so doing activate the ori. With an in vivo plasmid incompatibility assay, we find that pi monomers bind cooperatively to two adjacent iterons. Cooperative binding is eliminated by insertion of a half-helical turn between two iterons but is diminished only slightly by insertion of a full helical turn between two iterons. These studies show also that pi bound to a consensus site promotes occupancy of an adjacent mutated site, another hallmark of cooperative interactions. pi monomer/iteron interactions were quantified using a monomer-biased pi variant in vitro with the same collection of two-iteron constructs. The cooperativity coefficients mirror the plasmid incompatibility results for each construct tested. pi dimer/iteron interactions were quantified with a dimer-biased mutant in vitro and it was found that pi dimers bind with negligible cooperativity to two tandem iterons.

The ColE2-P9 Rep protein binds to the origin DNA as a monomer

The Rep proteins of some plasmid replicons have two functions. Dimers bind to the operator sequences acting as auto-repressors, whereas monomers bind to the iterons to initiate replication of DNA. The ColE2 Rep proteins are present mostly in a dimeric form with some multimers larger than dimers in solution, while the form of Rep binding to Ori is not known. We used an EMSA-based method to determine the molecular weight of Rep in the Rep-Ori complex. The result suggested that Rep binds to Ori as a monomer. In addition, the result of EMSA using the Rep protein fused with the maltose binding protein and the His6-tag also supported this conclusion. We proposed that dimerization of Rep might probably be involved in keeping the copy number of the ColE2 plasmid at the normal low level by limiting the amount of active monomeric forms of Rep in the host cell.

Early Events in the Binding of the pPS10 Replication Protein RepA to Single Iteron and Operator DNA Sequences

RepA protein, encoded in the Pseudomonas pPS10 replicon, is a stable dimer in solution (dRepA), acting as a self-repressor of repA transcription through binding to an inverted repeat operator. However, RepA monomers (mRepA) are required to initiate plasmid replication upon binding to four directly repeated DNA sequences (iterons). RepA is composed of two winged-helix (WH) domains: C-terminal WH2 is the main DNA-binding domain (DBD) for both target sequences, whereas N-terminal WH1 acts as dimerization interface in dRepA, but becomes a second DBD in mRepA. On the basis of CD spectroscopy, hydrodynamics, X-ray crystallography and model building studies, we proposed previously that the activation of RepA initiator implies a large structural change in WH1, coupled to protein monomerization and interdomain compaction. Here, we report novel features in the process. Binding curves of RepA to an iteron, followed by fluorescence anisotropy in solution and by surface plasmon resonance on immobilized DNA, exhibit the profiles characteristic of transitions between three states. In contrast, RepA-R93C, a monomeric activated mutant, exhibits a single binding transition. This suggests the presence of an intermediate species in the iteron-induced dissociation and structural transformation of RepA. High concentrations of bovine serum albumin or ovalbumin (macromolecular crowding) enhance RepA affinity for an iteron in solution and, in gel mobility-shift assays, result in the visualization of novel protein-DNA complexes. RepA-induced DNA bending requires the binding of two WH domains: either both WH2 in dimers (operator) or WH1 plus WH2 in monomers (iteron).

Origin pairing ('handcuffing') and unpairing in the control of P1 plasmid replication

The P1 plasmid origin has an array of five binding sites (iterons) for the plasmid-encoded initiator protein RepA. Saturation of these sites is required for initiation. Iterons can also pair via their bound RepAs. The reaction, called handcuffing, is believed to be the key to control initiation negatively. Here we have determined some of the mechanistic details of the reaction. We show that handcuffed RepA-iteron complexes dissociate when they are diluted or challenged with cold competitor iterons, suggesting spontaneous reversibility of the handcuffing reaction. The complex formation increases with increased RepA binding, but decreases upon saturation of binding. Complex formation also decreases in the presence of molecular chaperones (DnaK and DnaJ) that convert RepA dimers to monomers. This indicates that dimers participate in handcuffing, and that chaperones are involved in reversing handcuffing. They could play a direct role by reducing dimers and an indirect role by increasing monomers that would compete out the weaker binding dimers from the origin. We propose that an increased monomer to dimer ratio is the key to reverse handcuffing.

Role of pi dimers in coupling ("handcuffing") of plasmid R6K's gamma ori iterons

One proposed mechanism of replication inhibition in iteron-containing plasmids (ICPs) is "handcuffing," in which the coupling of origins via iteron-bound replication initiator (Rep) protein turns off origin function. In minimal R6K replicons, copy number control requires the interaction of plasmid-encoded pi protein with the seven 22-bp iterons of the gamma origin of replication. Like other related Rep proteins, pi exists as both monomers and dimers. However, the ability of pi dimers to bind iterons distinguishes R6K from most other ICPs, where only monomers have been observed to bind iterons. Here, we describe experiments to determine if monomers or dimers of pi protein are involved in the formation of handcuffed complexes. Standard ligation enhancement assays were done using pi variants with different propensities to bind iterons as monomers or dimers. Consistent with observations from several ICPs, a hyperreplicative variant (pi.P106L(wedge)F107S) exhibits deficiencies in handcuffing. Additionally, a novel dimer-biased variant of pi protein (pi.M36A(wedge)M38A), which lacks initiator function, handcuffs iteron-containing DNA more efficiently than does wild-type pi. The data suggest that pi dimers mediate handcuffing, supporting our previously proposed model of handcuffing in the gamma ori system. Thus, dimers of pi appear to possess three distinct inhibitory functions with respect to R6K replication: transcriptional autorepression of pi expression, in cis competition (for origin binding) with monomeric activator pi, and handcuffing-mediated inhibition of replication in trans.

Multiple homeostatic mechanisms in the control of P1 plasmid replication

Many organisms control initiation of DNA replication by limiting supply or activity of initiator proteins. In plasmids, such as P1, initiators are limited primarily by transcription and dimerization. However, the relevance of initiator limitation to plasmid copy number control has appeared doubtful, because initiator oversupply increases the copy number only marginally. Copy number control instead has been attributed to initiator-mediated plasmid pairing ("handcuffing"), because initiator mutations to handcuffing deficiency elevates the copy number significantly. Here, we present genetic evidence of a role for initiator limitation in plasmid copy number control by showing that autorepression-defective initiator mutants also can elevate the plasmid copy number. We further show, by quantitative modeling, that initiator dimerization is a homeostatic mechanism that dampens active monomer increase when the protein is oversupplied. This finding implies that oversupplied initiator proteins are largely dimeric, partly accounting for their limited ability to increase copy number. A combination of autorepression, dimerization, and handcuffing appears to account fully for control of P1 plasmid copy number.

Twenty years of the pPS10 replicon: insights on the molecular mechanism for the activation of DNA replication in iteron-containing bacterial plasmids

This review focuses on the contributions of the Pseudomonas replicon pPS10 to understanding the initiation of DNA replication in iteron-containing plasmids from Gram-negative bacteria. Dimers of the pPS10 initiator protein (RepA) repress repA transcription by binding to the two halves of an inverted repeat operator. RepA monomers are the active initiator species that bind to four directly repeated sequences (iterons). pPS10 initiator was the first Rep protein whose domains were defined (two "winged-helix," WH modules) and their binding sites were identified at each half of the iteron repeat. This was confirmed by the crystal structure of the monomer of a homologous initiator (RepE from F plasmid) bound to iteron DNA. The recently solved structure of the dimeric N-terminal domain (WH1) of pPS10 RepA, when compared to the RepE monomer, shows that upon dimer dissociation an alpha-helix at WH1 C-terminus becomes part of an interdomain beta-sheet. In solution, the iteron sequence, by itself, can induce the same kind of structural transformation in RepA. This seems to alter the package of both WH domains to adapt their DNA reading heads (HTH motifs) to the distinct spacing between half repeats in iterons and operator. Based on biochemical and spectroscopic work, structural and functional similarities were proposed between RepA and archaeal/eukaryal initiators. This was independently confirmed by the crystal structure of the archaeal initiator Cdc6. Characterization of mutants, either in pPS10 or in the Escherichia coli chromosome, has provided some evidence on a WH1-mediated interaction between RepA and the chromosomal initiator DnaA that results in a broadened-host range.

Binding modes of the initiator and inhibitor forms of the replication protein pi to the gamma ori iteron of plasmid R6K

Discerning the interactions between initiator protein and the origin of replication should provide insights into the mechanism of DNA replication initiation. In the gamma origin of plasmid R6K, the Rep protein, pi, is distinctive in that it can bind the seven 22-bp iterons in two forms; pi monomers activate replication, whereas pi dimers act as inhibitors. In this work, we used wild type and variants of the pi protein with altered monomer/dimer ratios to study iteron/pi interactions. High resolution contact mapping was conducted using multiple techniques (missing base contact probing, methylation protection, base modification, and hydroxyl radical footprinting), and the electrophoretic separation of nucleoprotein complexes allowed us to discriminate between contact patterns produced by pi monomers and dimers. We also isolated iteron mutants that affected the binding of pi monomers (only) or both monomers and dimers. The mutational studies and footprinting analyses revealed that, when binding DNA, pi monomers interact with nucleotides spanning the entire length of the iteron. In contrast, pi dimers interact with only the left half of the iteron; however, the retained interactions are strikingly similar to those seen with monomers. These results support a model in which Rep protein dimerization disturbs one of two DNA binding domains important for monomer/iteron interaction; the dimer/iteron interaction utilizes only one DNA binding domain.

pi protein- and ATP-dependent transitions from 'closed' to 'open' complexes at the gamma ori of plasmid R6K

R6K-encoded pi protein can bind to the seven, 22 bp tandem iterons of the gamma origin. In this work, we use a variant of pi, His-pi.F107S, that is hyperactive in replication. In vitro, His-pi.F107S-dependent local DNA melting (open complex formation) occurs in the absence of host proteins (IHF/HU or DnaA) and it is positioned in the A + T-rich region adjacent to iterons. Experiments described here examine the effects of ATP, Mg2+ and temperature on the opening reaction. We show that the opening of the gamma origin can occur in the presence of ATP as well as AMP-PCP (a non-hydrolyzable ATP analog). This suggests that, for gamma origin, ATP hydrolysis may be unnecessary for open complex formation facilitated by His-pi.F107S. In the absence of ATP or Mg2+, His-pi.F107S yielded data suggestive of distortions in the iteron attributable to DNA bending rather than DNA melting. Our findings also demonstrate that ATP and pi stimulate open complex formation over a wide range of temperatures, but not at 0 degrees C. These and other results indicate that ATP and/or Mg2+ are not needed for His-pi.F107S binding to iterons and that ATP effects an allosteric change in the protein bound to gamma origin.

Plasmid P1 RepA Is Homologous to the F Plasmid RepE Class of Initiators

DNA replication of plasmid P1 requires a plasmid-encoded origin DNA-binding protein, RepA. RepA is an inactive dimer and is converted by molecular chaperones into an active monomer that binds RepA binding sites. Although the sequence of RepA is not homologous to that of F plasmid RepE, we found by using fold-recognition programs that RepA shares structural homology with RepE and built a model based on the RepE crystal structure. We constructed mutants in the two predicted DNA binding domains to test the model. As expected, the mutants were defective in P1 DNA binding. The model predicted that RepA binds the first half of the binding site through interactions with the C-terminal DNA binding domain and the second half through interactions with the N-terminal domain. The experiments supported the prediction. The model was further supported by the observation that mutants defective in dimerization map to the predicted subunit interface region, based on the crystal structure of pPS10 RepA, a RepE family member. These results suggest P1 RepA is structurally homologous to plasmid initiators, including those of F, R6K, pSC101, pCU1, pPS10, pFA3, pGSH500, Rts1, RepHI1B, RepFIB, and RSF1010.

Isomerization and apparent DNA bending by π, the replication protein of plasmid R6K

Plasmid R6K-encoded pi protein has multiple regulatory functions in replication and transcription. These functions rely, in part, on a complex set of interactions between monomers and dimers of the protein and distinct DNA targets, the direct and inverted repeats (DRs, IRs). In the work described here, we examine the isomerization and DNA bending properties of pi using electrophoretic mobility shift assays and circular permutation assays. Our data suggest that pi dimers can bend IRs, and dimer subunits seem to readily associate in head-to-head and head-to-tail fashion. The ability of pi to bend DRs is also reexamined using techniques that allow us to discriminate between bending induced by its different isomeric forms. We find that both monomers and dimers bend a single DR to similar degrees while results with 2DRs are more complex. The significance of the bending data in regard to a possible mechanism for replication initiation by pi protein is discussed.

Characterization of His-tagged, R6K-encoded pi protein variants

The pi protein of plasmid R6K is a multifunctional replication (Rep) protein, its different activities attributable, in part, to different oligomeric states: monomers and dimers. We have previously shown that His-tagged variants of the protein can exhibit alterations in dimer stability. Herein, we examined the functional properties of selected His-tagged derivatives of pi (His-pi x wt and three hyperactive replication variants) to determine if the functionality of these proteins in replication, DNA binding, and oligomerization is altered. Our results indicate that these tagged proteins retain the characteristics previously demonstrated for their non-tagged counterparts making them suitable for ongoing studies of pi protein structure and functions in replication and transcription.

A conformational switch between transcriptional repression and replication initiation in the RepA dimerization domain

Plasmids are natural vectors for gene transfer. In Gram-negative bacteria, plasmid DNA replication is triggered when monomers of an initiator protein (Rep) bind to direct repeats at the origin sequence. Rep dimers, which are inactive as initiators, bind to an inverse repeat operator, repressing transcription of the rep gene. Rep proteins are composed of N-terminal dimerization and C-terminal DNA-binding domains. Activation of Rep is coupled to dimer dissociation, converting the dimerization domain into a second origin-binding module. Although the structure of the monomeric F plasmid initiator (mRepE) has been determined, the molecular nature of Rep activation remains unknown. Here we report the crystal structure of the dimeric N-terminal domain of the pPS10 plasmid initiator (dRepA). dRepA has a winged-helix fold, as does its homologous domain in mRepE. However, dimerization transforms an interdomain loop and beta-strand (monomeric RepE) into an alpha-helix (dimeric RepA). dRepA resemble the C terminus of eukaryotic and archaeal Cdc6, giving clues to the phylogeny of DNA replication initiators.

Structural changes in RepA, a plasmid replication initiator, upon binding to origin DNA

RepA protein is the DNA replication initiator of the Pseudomonas plasmid pPS10. RepA dimers bind to an inversely repeated operator sequence in repA promoter, thus repressing its own synthesis, whereas monomers bind to four directly repeated sequences (iterons) to initiate DNA replication. We had proposed previously that RepA is composed of two winged-helix (WH) domains, a structural unit also present in eukaryotic and archaeal initiators. To bind to the whole iteron sequence through both domains, RepA should couple monomerization to a conformational change in the N-terminal WH, which includes a leucine zipper-like sequence motif. We show for the first time that, by itself, binding to iteron DNA in vitro dissociates RepA dimers into monomers and alters RepA conformation, suggesting an allosteric effect. Furthermore, we also show that similar changes in RepA are promoted by mutations that substitute two Leu residues of the putative leucine zipper by Ala, destabilizing the hydrophobic core of the first WH. We propose that this mutant (RepA-2L2A) resembles a transient folding intermediate in the pathway leading to active monomers. These findings, together with the known activation of other Rep-type proteins by chaperones, are relevant to understand the molecular basis of plasmid DNA replication initiation.

Monomer/dimer ratios of replication protein modulate the DNA strand-opening in a replication origin

DNA opening is an essential step in the initiation of replication via the Cairns mode of replication. The opening reaction was investigated in a gamma ori system by using hyperactive variants of plasmid R6K-encoded initiator protein, pi. Reactivity to KMnO4 (indicative of opening) within gamma ori DNA occurred in both strands of a superhelical template upon the combined addition of wt pi, DnaA and integration host factor (IHF), each protein known to specifically bind gamma ori. IHF, examined singly, enhanced reactivity to KMnO4. The IHF-dependent reactive residues, however, are distinct from those dependent on pi (wt and hyperactive variants). Remarkably, the DNA helix opening does not require IHF and/or DnaA when hyperactive variants of pi were used instead of wt protein. We present three lines of evidence consistent with the hypothesis that DNA strand separation is facilitated by pi monomers despite the fact that both monomers and dimers of the protein can bind to iterons (pi binding sites). Taken together, our data suggest that pi elicits its ability to modulate plasmid copy number at the DNA helix-opening step.

A pot-pourri of plasmid paradoxes: effects of a second copy

Bacterial plasmids are exemplary subjects for study, being conveniently isolated, dissected, reassembled, and introduced into various hosts. Their versatility and power make them eminently worthy of our attention. In what follows I consider some consequences of simply doubling the dosage of particular plasmid genes or of forming a plasmid dimer. These consequences can be perverse, paradoxical, or informative. They bear on questions of cell viability, copy number limitation, clonal homogeneity, check-point control, and the recovery of mutants. They have relevance to biotechnology, evolution and medicine. In reviewing these effects, my motivation is largely to share my enthusiasm for certain kinds of biological narratives, the nature of which is best left for the reader to discern.

Control of plasmid DNA replication by iterons: no longer paradoxical

Replication origins of a family of bacterial plasmids have multiple sites, called iterons, for binding a plasmid-specific replication initiator protein. The iteron-initiator interactions are essential for plasmid replication as well as for inhibition of plasmid over-replication. The inhibition increases with plasmid copy number and eventually shuts plasmid replication off completely. The mechanism of inhibition appears to be handcuffing, the coupling of origins via iteron-bound initiators that block origin function. The probability of a trans-reaction such as handcuffing is expected to increase with plasmid copy number and diminish with increases in cell volume, explaining how the copy number can be maintained in a growing cell. Control is also exerted at the level of initiator synthesis and activation by chaperones. We propose that increases in active initiators promote initiation by overcoming handcuffing, but handcuffing dominates when the copy number reaches a threshold. Handcuffing should be ultrasensitive to copy number, as the negative control by iterons can be stringent (switch-like).

Dimers of pi protein bind the A+T-rich region of the R6K gamma origin near the leading-strand synthesis start sites: regulatory implications

The replication of gamma origin, a minimal replicon derived from plasmid R6K, is controlled by the Rep protein pi. At low intracellular concentrations, pi activates the gamma origin, while it inhibits replication at elevated concentrations. Additionally, pi acts as a transcription factor (auto)repressing its own synthesis. These varied regulatory functions depend on pi binding to reiterated DNA sequences bearing a TGAGNG motif. However, pi also binds to a "non-iteron" site (i.e., not TGAGNG) that resides in the A+T-rich region adjacent to the iterons. This positioning places the non-iteron site near the start sites for leading-strand synthesis that also occur in the A+T-rich region of gamma origin. We have hypothesized that origin activation (at low pi levels) would require the binding of pi monomers to iterons, while the binding of pi dimers to the non-iteron site (at high pi levels) would be required to inhibit priming. Although monomers as well as dimers can bind to an iteron, we demonstrate that only dimers bind to the non-iteron site. Two additional pieces of data support the hypothesis of negative replication control by pi binding to the non-iteron site. First, pi binds to the non-iteron site about eight times less well than it binds to a single iteron. Second, hyperactive variants of pi protein (called copy-up) either do not bind to the non-iteron site or bind to it less well than wild-type pi. We propose a replication control mechanism whereby pi would directly inhibit primer formation.

Regulatory implications of protein assemblies at the gamma origin of plasmid R6K - a review

Recognition of the replication origin (ori) by initiator protein is a recurring theme for the regulated initiation of DNA replication in diverse biological systems. The objective of the work reviewed here is to understand the initiation process focusing specifically on the gamma-ori of the antibiotic-resistance plasmid R6K. The control of gamma-ori copy number is determined by both plasmid-encoded and host-encoded factors. The two central regulatory elements of the plasmid are a multifunctional initiator protein pi, and sequence-related DNA target sites, the inverted half-repeats (IRs) and the direct repeats (DRs). The replication activator and inhibitor activities of pi seem to be at least partially distributed between two naturally occurring pi polypeptides (designated by their molecular weights pi35.0 and pi30.5). Regulatory variants of pi with altered states of oligomerization in nucleoprotein complexes with DRs and IRs have been isolated. The properties of these mutants laid the foundation for our model of pi protein activity which proposes that different protein surfaces are required for the formation of functionally distinct complexes of pi with DRs and IRs. These mutants also suggest that pi polypeptides have a modular structure; the C-terminus contains the DNA-binding domain while the N-terminus controls protein oligomerization. Additionally, pi35.0 binds to a novel DNA sequence in the A+T-rich segment of gamma-ori. This binding site is at or near the site from which synthesis of the leading strand begins.