Infrared dichroism of twisted beta-sheet barrels. The structure of E. coli outer membrane proteins

Structure of amyloid β25-35 in lipid environment and cholesterol-dependent membrane pore formation

The amyloid β (Aβ) peptide and its shorter variants, including a highly cytotoxic Aβ_25–35 peptide, exert their neurotoxic effect during Alzheimer’s disease by various mechanisms, including cellular membrane permeabilization. The intrinsic polymorphism of Aβ has prevented the identification of the molecular basis of Aβ pore formation by direct structural methods, and computational studies have led to highly divergent pore models. Here, we have employed a set of biophysical techniques to directly monitor Ca²⁺-transporting Aβ_25–35 pores in lipid membranes, to quantitatively characterize pore formation, and to identify the key structural features of the pore. Moreover, the effect of membrane cholesterol on pore formation and the structure of Aβ_25–35 has been elucidated. The data suggest that the membrane-embedded peptide forms 6- or 8-stranded β-barrel like structures. The 8-stranded barrels may conduct Ca²⁺ ions through an inner cavity, whereas the tightly packed 6-stranded barrels need to assemble into supramolecular structures to form a central pore. Cholesterol affects Aβ_25–35 pore formation by a dual mechanism, i.e., by direct interaction with the peptide and by affecting membrane structure. Collectively, our data illuminate the molecular basis of Aβ membrane pore formation, which should advance both basic and clinical research on Alzheimer’s disease and membrane-associated pathologies in general.

FTIR Analysis of Proteins and Protein-Membrane Interactions

Fourier transform infrared (FTIR) spectroscopy has become one of the major techniques of structural characterization of proteins, peptides, and protein-membrane interactions. While the method does not have the capability of providing the precise, atomic-resolution molecular structure, it is exquisitely sensitive to conformational changes occurring in proteins upon functional transitions or intermolecular interactions. The sensitivity of vibrational frequencies to atomic masses has led to development of "isotope-edited" FTIR spectroscopy, where structural effects in two proteins, one unlabeled and the other labeled with a heavier stable isotope, such as ¹³C, are resolved simultaneously based on spectral downshift (separation) of the amide I band of the labeled protein. The same isotope effect is used to identify site-specific conformational changes in proteins by site-directed or segmental isotope labeling. Negligible light scattering in the infrared region provides an opportunity to study intermolecular interactions between large protein complexes, interactions of proteins and peptides with lipid vesicles, or protein-nucleic acid interactions without light scattering problems often encountered in ultraviolet spectroscopy. Attenuated total reflection FTIR (ATR-FTIR) is a surface-sensitive version of infrared spectroscopy that has proved useful in studying membrane proteins and lipids, protein-membrane interactions, mechanisms of interfacial enzymes, the structural features of membrane pore forming proteins and peptides, and much more. The purpose of this chapter was to provide a practical guide to analyze protein structure and protein-membrane interactions by FTIR and ATR-FTIR techniques, including procedures of sample preparation, measurements, and data analysis. Basic background information on FTIR spectroscopy, as well as some relatively new developments in structural and functional characterization of proteins and peptides in lipid membranes, is also presented.

Supersecondary structure prediction of transmembrane beta-barrel proteins

We introduce a graph-theoretic model for predicting the supersecondary structure of transmembrane β-barrel proteins--a particular class of proteins that performs diverse important functions but it is difficult to determine their structure with experimental methods. This ab initio model resolves the protein folding problem based on pseudo-energy minimization with the aid of a simple probabilistic filter. It also allows for determining structures whose barrel follows a given permutation on the arrangement of β-strands, and allows for rapidly discriminating the transmembrane β-barrels from other kinds of proteins. The model is fairly accurate, robust and can be run very efficiently on PC-like computers, thus proving useful for genome screening.

Structural characterization of membrane proteins and peptides by FTIR and ATR-FTIR spectroscopy

Fourier transform infrared (FTIR) spectroscopy is widely used in structural characterization of proteins or peptides. While the method does not have the capability of providing the precise, atomic-resolution molecular structure, it is exquisitely sensitive to conformational changes occurring in proteins upon functional transitions or upon intermolecular interactions. Sensitivity of vibrational frequencies to atomic masses has led to development of "isotope-edited" FTIR spectroscopy, where structural effects in two proteins, one unlabeled and the other labeled with a heavier stable isotope, such as (13)C, are resolved simultaneously based on spectral downshift (separation) of the amide I band of the labeled protein. The same isotope effect is used to identify site-specific conformational changes in proteins by site-directed or segmental isotope labeling. Negligible light scattering in the infrared region provides an opportunity to study intermolecular interactions between large protein complexes, interactions of proteins and peptides with lipid vesicles, or protein-nucleic acid interactions without light scattering problems often encountered in ultraviolet spectroscopy. Attenuated total reflection FTIR (ATR-FTIR) is a surface-sensitive version of infrared spectroscopy that has proved useful in studying membrane proteins and lipids, protein-membrane interactions, mechanisms of interfacial enzymes, and molecular architecture of membrane pore or channel forming proteins and peptides. The purpose of this article was to provide a practical guide to analyze protein structure and protein-membrane interactions by FTIR and ATR-FTIR techniques, including procedures of sample preparation, measurements, and data analysis. Basic background information on FTIR spectroscopy, as well as some relatively new developments in structural and functional characterization of proteins and peptides in lipid membranes, are also presented.

Molecular basis for membrane pore formation by Bax protein carboxyl terminus

Bax protein plays a key role in mitochondrial membrane permeabilization and cytochrome c release upon apoptosis. Our recent data have indicated that the 20-residue C-terminal peptide of Bax (BaxC-KK; VTIFVAGVLTASLTIWKKMG), when expressed intracellularly, translocates to the mitochondria and exerts lethal effect on cancer cells. Moreover, the BaxC-KK peptide, as well as two mutants where the two lysines are replaced with glutamate (BaxC-EE) or leucine (BaxC-LL), have been shown to form relatively large pores in lipid membranes, composed of up to eight peptide molecules per pore. Here the pore structure is analyzed by polarized Fourier transform infrared, circular dichroism, and fluorescence experiments on the peptides reconstituted in phospholipid membranes. The peptides assume an α/β-type secondary structure within membranes. Both β-strands and α-helices are significantly (by 30-60 deg) tilted relative to the membrane normal. The tryptophan residue embeds into zwitterionic membranes at 8-9 Å from the membrane center. The membrane anionic charge causes a deeper insertion of tryptophan for BaxC-KK and BaxC-LL but not for BaxC-EE. Combined with the pore stoichiometry determined earlier, these structural constraints allow construction of a model of the pore where eight peptide molecules form an "α/β-ring" structure within the membrane. These results identify a strong membranotropic activity of Bax C-terminus and propose a new mechanism by which peptides can efficiently perforate cell membranes. Knowledge on the pore forming mechanism of the peptide may facilitate development of peptide-based therapies to kill cancer or other detrimental cells such as bacteria or fungi.

Identification of a novel Francisella tularensis factor required for intramacrophage survival and subversion of innate immune response

Francisella tularensis, the causative agent of tularemia, is one of the deadliest agents of biological warfare and bioterrorism. Extremely high virulence of this bacterium is associated with its ability to dampen or subvert host innate immune response. The objectives of this study were to identify factors and understand the mechanisms of host innate immune evasion by F. tularensis. We identified and explored the pathogenic role of a mutant interrupted at gene locus FTL_0325, which encodes an OmpA-like protein. Our results establish a pathogenic role of FTL_0325 and its ortholog FTT0831c in the virulent F. tularensis SchuS4 strain in intramacrophage survival and suppression of proinflammatory cytokine responses. This study provides mechanistic evidence that the suppressive effects on innate immune responses are due specifically to these proteins and that FTL_0325 and FTT0831c mediate immune subversion by interfering with NF-κB signaling. Furthermore, FTT0831c inhibits NF-κB activity primarily by preventing the nuclear translocation of p65 subunit. Collectively, this study reports a novel F. tularensis factor that is required for innate immune subversion caused by this deadly bacterium.

A graph-theoretic approach for classification and structure prediction of transmembrane β-barrel proteins

Background

Transmembrane β-barrel proteins are a special class of transmembrane proteins which play several key roles in human body and diseases. Due to experimental difficulties, the number of transmembrane β-barrel proteins with known structures is very small. Over the years, a number of learning-based methods have been introduced for recognition and structure prediction of transmembrane β-barrel proteins. Most of these methods emphasize on homology search rather than any biological or chemical basis.

Results

We present a novel graph-theoretic model for classification and structure prediction of transmembrane β-barrel proteins. This model folds proteins based on energy minimization rather than a homology search, avoiding any assumption on availability of training dataset. The ab initio model presented in this paper is the first method to allow for permutations in the structure of transmembrane proteins and provides more structural information than any known algorithm. The model is also able to recognize β-barrels by assessing the pseudo free energy. We assess the structure prediction on 41 proteins gathered from existing databases on experimentally validated transmembrane β-barrel proteins. We show that our approach is quite accurate with over 90% F-score on strands and over 74% F-score on residues. The results are comparable to other algorithms suggesting that our pseudo-energy model is close to the actual physical model. We test our classification approach and show that it is able to reject α-helical bundles with 100% accuracy and β-barrel lipocalins with 97% accuracy.

Conclusions

We show that it is possible to design models for classification and structure prediction for transmembrane β-barrel proteins which do not depend essentially on training sets but on combinatorial properties of the structures to be proved. These models are fairly accurate, robust and can be run very efficiently on PC-like computers. Such models are useful for the genome screening.

Membrane docking of the C2 domain from protein kinase Cα as seen by polarized ATR-IR. The role of PIP₂

We have used attenuated total internal reflection infrared spectroscopy (ATR-IR) spectroscopy to study the association of the C2 domain from protein kinase Cα (PKCα) with different phospholipid membranes, so as to characterise the mode of membrane docking and its modulation by the second-messenger lipid PIP₂. In parallel, we have also examined the membrane interaction of the C2 domain from cytosolic phospholipase A₂. PIP₂ did not induce significant changes in secondary structure of the membrane-bound PKCα-C2 domain, nor did binding of the PKCα-C2 domain change the dichroic ratios of the lipid chains, whereas the C2 domain from phospholipase A₂ did perturb the lipid chain orientation. Measurements of the dichroic ratios for the amide I and amide II protein bands were combined so as to distinguish the tilt of the β-sheets from that of the β-strands within the sheet. When associated with POPC/POPS membranes, the β-sandwich of the PKCα-C2 domain is inclined at an angle α=35° to the membrane normal, i.e., is oriented more nearly perpendicular than parallel to the membrane. In the process of membrane docking, the tilt angle increases to α=44° in the presence of PIP₂, indicating that the β-sandwich comes closer to the membrane surface, so confirming the importance of this lipid in determining docking of the C2 domain and consequent activation of PKCα.

Protein-lipid interactions with Fusobacterium nucleatum major outer membrane protein FomA: spin-label EPR and polarized infrared spectroscopy

FomA, the major outer membrane protein of Fusobacterium nucleatum, was expressed and purified in Escherichia coli and reconstituted from detergent in bilayer membranes of phosphatidylcholines with chain lengths from C(12:0) to C(17:0). The conformation and orientation of membrane-incorporated FomA were determined from polarized, attenuated total reflection, infrared (IR) spectroscopy, and lipid-protein interactions with FomA were characterized by using electron paramagnetic resonance (EPR) spectroscopy of spin-labeled lipids. Approximately 190 residues of membranous FomA are estimated to be in a beta-sheet configuration from IR band fitting, which is consistent with a 14-strand transmembrane beta-barrel structure. IR dichroism of FomA indicates that the beta-strands are tilted by approximately 45 degrees relative to the sheet/barrel axis and that the order parameter of the latter displays a discontinuity corresponding to hydrophobic matching with fluid C(13:0) lipid chains. The stoichiometry ( N b = 23 lipids/monomer) of lipid-protein interaction from EPR demonstrates that FomA is not trimeric in membranes of diC(14:0) phosphatidylcholine and is consistent with a monomeric beta-barrel of 14-16 strands. The pronounced selectivity of interaction found with anionic spin-labeled lipids places basic residues of the protein in the vicinity of the polar-apolar membrane interfaces, consistent with current topology models. Comparison with similar data from the 8- to 22-stranded E. coli outer membrane proteins, OmpA, OmpG, and FhuA, supports the above conclusions.

Incorporation of outer membrane protein OmpG in lipid membranes: protein-lipid interactions and beta-barrel orientation

OmpG is an intermediate size, monomeric, outer membrane protein from Escherichia coli, with n beta = 14 beta-strands. It has a large pore that is amenable to modification by protein engineering. The stoichiometry ( N b = 20) and selectivity ( K r = 0.7-1.2) of lipid-protein interaction with OmpG incorporated in dimyristoyl phosphatidylcholine bilayer membranes was determined with various 14-position spin-labeled lipids by using EPR spectroscopy. The limited selectivity for different lipid species is consistent with the disposition of charged residues in the protein. The conformation and orientation (beta-strand tilt and beta-barrel order parameters) of OmpG in disaturated phosphatidylcholines of odd and even chain lengths from C(12:0) to C(17:0) was determined from polarized infrared spectroscopy of the amide I and amide II bands. A discontinuity in the protein orientation (deduced from the beta-barrel order parameters) is observed at the point of hydrophobic matching of the protein with lipid chain length. Compared with smaller (OmpA; n beta = 8) and larger (FhuA; n beta = 22) monomeric E. coli outer membrane proteins, the stoichiometry of motionally restricted lipids increases linearly with the number of beta-strands, the tilt (beta approximately 44 degrees ) of the beta-strands is comparable for the three proteins, and the order parameter of the beta-barrel increases regularly with n beta. These systematic features of the integration of monomeric beta-barrel proteins in lipid membranes could be useful for characterizing outer membrane proteins of unknown structure.

Lateral pressure profile, spontaneous curvature frustration, and the incorporation and conformation of proteins in membranes

Lipid-protein interactions are an important determinant of the stability and function of integral and transmembrane proteins. In addition to local interactions at the lipid-protein interface, global interactions such as the distribution of internal lateral pressure may also influence protein conformation. It is shown here that the effects of the membrane lateral pressure profile on the conformation or insertion of proteins in membranes are equivalent to the elastic response to the frustrated spontaneous curvature, c(o), of the component lipid monolayer leaflets. The chemical potential of the protein in the membrane is predicted to depend linearly on the spontaneous curvature of the lipid leaflets, just as does the contribution of the protein to the elastic bending energy of the lipid, and to be independent of the hydrophobic tension, gamma(phob), at the lipid-water interface. Analysis of the dependence of protein partitioning or conformational transitions on spontaneous curvature of the constituent lipids gives an experimental estimate for the cross-sectional intramembrane shape of the protein or its difference between conformations. Values in the region of 50-110 A(2) are estimated for the effective cross-sectional shape changes on the insertion and conductance transitions of alamethicin, and on the activation of CTP:phosphocholine cytidylyltransferase or rhodopsin in lipid membranes. Much larger values are estimated for the mechanosensitive channel, MscL. Values for the change in intramembrane shape may also be used, together with determinations of lipid relative association constants, to estimate contributions of direct lipid-protein interactions to the lateral pressure experienced by the protein. Changes in chemical potential approximately 12 kJ mol(-1) can be estimated for radial changes of 1 A in a protein of diameter 40 A.

Association of the components of the binary toxin from Bacillus sphaericus in solution and with model lipid bilayers

We show herein that interaction in aqueous solution of the two components of binary toxin from Bacillus sphaericus, BinA and BinB, leads to a dramatic conformational change, from beta turns or random coil, to beta structure. Also, either BinA or BinB separately or their equimolar mixture, interact with lipid bilayers resulting in further conformational changes. Upon membrane association, the change in conformation observed for BinA or BinB separately is different from that observed when the proteins are combined, indicating that proper folding depends on the presence of the complementary subunit. We also show, in contrast to previous reports, that BinB, but not BinA, is able to insert in model neutral lipid monolayers.

Positioning Membrane Proteins by Novel Protein Engineering and Biophysical Approaches

Membrane proteins are unique, in that they can function properly only when they are bound to cellular membranes in a distinct manner. Therefore, positioning of membrane proteins with respect to the membrane is required in addition to the three-dimensional structures in order to understand their detailed molecular mechanisms. Atomic-resolution structures of membrane proteins that have been determined to date provide the atom coordinates in arbitrary coordinate systems with no relation to the membrane and therefore provide little or no information on how the protein would interact with the membrane. This is especially true for peripheral membrane proteins, because they, unlike integral proteins, are devoid of well-defined hydrophobic transmembrane domains. Here, we present a novel technique for determination of the configuration of a protein-membrane complex that involves protein ligation, segmental isotope labeling, polarized infrared spectroscopy, membrane depth-dependent fluorescence quenching, and analytical geometry algorithms. We have applied this approach to determine the structure of a membrane-bound phospholipase A2. Our results provide an unprecedented structure of a membrane-bound protein in which the z-coordinate of each atom is the distance from the membrane center and therefore allows precise location of each amino acid relative to the membrane. Given the functional significance of the orientation and location of membrane-bound proteins with respect to the membrane, we propose to specify this structural feature as the "quinary" structure of membrane proteins.

Orientation of β-Barrel Proteins OmpA and FhuA in Lipid Membranes. Chain Length Dependence from Infrared Dichroism†

The outer-membrane proteins OmpA and FhuA of Escherichia coli are monomeric beta-barrels of widely differing size. Polarized attenuated total reflection infrared spectroscopy has been used to determine the orientation of the beta-barrels in phosphatidylcholine host matrices of different lipid chain lengths. The linear dichroism of the amide I band from OmpA and FhuA in hydrated membranes generally increases with increasing chain length from diC(12:0) to diC(17:0) phosphatidylcholine, in both the fluid and gel phases. Measurements of the amide I and amide II dichroism from dry samples are used to deduce the strand tilt (beta = 46 degrees for OmpA and beta = 44.5 degrees for FhuA). These values are then used to deduce the order parameters, P(2)(cos alpha), of the beta-barrels from the amide I dichroic ratios of the hydrated membranes. The orientational ordering of the beta-barrels and their assembly in the membrane are discussed in terms of hydrophobic matching with the lipid chains.

Evaluation of the ordering of membranes in multilayer stacks built on an ATR-FTIR germanium crystal with atomic force microscopy: the case of the H(+),K(+)-ATPase-containing gastric tubulovesicle membranes

Polarized attenuated total reflection Fourier transform infrared spectra were recorded on multilayer stacks of native gastric tubulovesicle membranes. The spectral intensity and linear dichroism were measured for average thicknesses ranging between 0 and 100 bilayers. Atomic force microscopy was used to investigate the orientation of the membranes at the top of the stack. Height profiles were obtained along randomly drawn lines and slopes were computed over various distances. Orientation distribution functions were obtained from the slopes and decomposed into Legendre polynomials. It was found that the second Legendre polynomials coefficient characterizing the membrane orientation was always larger than 0.9. It could therefore be concluded that the membrane tilt does not significantly contribute to the infrared dichroism, even for the largest thicknesses tested.

Modulation of human 5-lipoxygenase activity by membrane lipids

Mammalian 5-lipoxygenase (5-LO) catalyzes the conversion of arachidonic acid (AA) to leukotrienes, potent inflammatory mediators. 5-LO is activated by a Ca(2+)-mediated translocation to membranes, and demonstrates the characteristic features of interfacially activated enzymes, yet the mechanism of membrane binding of 5-LO is not well understood. In an attempt to understand the mechanism of lipid-mediated activation of 5-LO, we have studied the effects of a large set of lipids on human recombinant 5-LO activity, as well as mutual structural effects of 5-LO and membranes. In the presence of 0.35 mM phosphatidylcholine (PC) and 0.2 mM Ca(2+), there was substrate inhibition at >100 microM AA. Data analysis at low AA concentrations yielded the following: K(m) approximately 103 microM and k(cat) approximately 56 s(-1). 5-LO activity was supported by PC more than by any other lipid tested except for a cationic lipid, which was more stimulatory than PC. Binding of 5-LO to zwitterionic and acidic membranes was relatively weak; the extent of binding increased 4-8 times in the presence of Ca(2+), whereas binding to cationic membranes was stronger and essentially Ca(2+)-independent. Polarized attenuated total reflection infrared experiments implied that 5-LO binds to membranes at a defined orientation with the symmetry axis of the putative N-terminal beta-barrel tilted approximately 45 degrees from the membrane normal. Furthermore, membrane binding of 5-LO resulted in dehydration of the membrane surface and was paralleled with stabilization of the structures of both 5-LO and the membrane. Our results provide insight into the understanding of the effects of membrane surface properties on 5-LO-membrane interactions and the interfacial activation of 5-LO.

Stable self-assembly of a protein engineering scaffold on gold surfaces

The outer membrane protein OmpF from Escherichia coli is a member of a large family of beta-barrel membrane proteins. Some, like OmpF, are pore-forming proteins whilse others are active transporters or enzymes. We have previously shown that the receptor-binding domain (R-domain) of the toxin colicin N binds with high affinity to OmpF reconstituted into tethered lipid bilayers on gold electrodes. The binding can be measured by surface plasmon resonance (SPR) and ion channel blockage (impedance spectroscopy, IS). In this paper we report the use of a mutant OmpF-E183C in which a single cysteine had been introduced on a short periplasmic turn. OmpF-E183C binds directly to gold surfaces and creates high-density protein layers by self-assembly from detergent solution. When the gold surface is pretreated with beta-mercaptoethanol and thiolipids are added after the protein immobilisation step, the protein is shown, by Fourier transform infrared spectroscopy (FTIR), to retain its beta-rich structure. Furthermore, we could also measure R-domain binding by SPR and IS, confirming the functional reconstitution of a self-assembled membrane protein monolayer at the gold surface. Because these beta-barrel proteins are recognized protein engineering scaffolds, the method provides a generic method for the simple self-assembly of protein interfaces from aqueous solution.

Tilt, twist, and coiling in beta-barrel membrane proteins: relation to infrared dichroism

The x-ray coordinates of beta-barrel transmembrane proteins from the porins superfamily and relatives are used to calculate the mean tilt of the beta-strands and their mean local twist and coiling angles. The 13 proteins examined correspond to beta-barrels with 8 to 22 strands, and shear numbers ranging from 8 to 24. The results are compared with predictions from the model of Murzin, Lesk, and Chothia for symmetrical regular barrels. Good agreement is found for the mean strand tilt, but the twist angles are smaller than those for open beta-sheets and beta-barrels with shorter strands. The model is reparameterised to account for the reduced twist characteristic of long-stranded transmembrane beta-barrels. This produces predictions of both twist and coiling angles that are in agreement with the mean values obtained from the x-ray structures. With the optimized parameters, the model can then be used to determine twist and coiling angles of transmembrane beta-barrels from measurements of the amide band infrared dichroism in oriented membranes. Satisfactory agreement is obtained for OmpF. The strand tilt obtained from the x-ray coordinates, or from the reparameterised model, can be combined with infrared dichroism measurements to obtain information on the orientation of the beta-barrel assembly in the membrane.

Structure and orientation of two voltage-dependent anion-selective channel isoforms. An attenuated total reflection fourier-transform infrared spectroscopy study

Two VDAC (voltage-dependent anion-selective channel) isoforms were purified from seed cotyledons of Phaseolus vulgaris by chromatofocusing chromatography. Attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy was used to study the structural properties of the two isoforms reconstituted in a mixture of asolectin and 5% stigmasterol. The IR spectra of the two VDAC isoforms were highly similar indicating 50 to 53% anti-parallel beta-sheet. The orientation of the beta-strands relative to the barrel axis was calculated from the experimentally obtained dichroic ratios of the amide I beta-sheet component and the amide II band. Comparing the IR spectra of the reconstituted VDAC isoforms with the IR spectra of the bacterial porin OmpF, for which a high resolution structure is available, provided evidence for a general structural organization of the VDAC isoforms similar to that of bacterial porins. Hydrogen-deuterium exchange measurements indicated that the exchange of the amide protons occurs to a higher extent in the two VDAC isoforms than in the OmpF porin.